Tender For supply of doctors stethoscope , bp handle 6inch with bp blade set , scissors 6 inch, 7inch, 8inch. , dental mirrors 6inch, 10inch. , scalpel 8inch , artery forceps 6inch,7inch,8inch,9inch , torch with two pencil cells , torch medium with two cells , hammer sledge and ball pane 2kg with claw hammer. , pipe wrench 10inch , hand vice grip 6inchplus minus 1inch , magnifying glass , nipper cutter , tin cutter , nose plier , knife 80 mm blade , c clamp 4inchplus minus 1inch , spanner adjustable 15 mm plus minus 5 mm , spanner adjustable 30 mm plus minus 5 mm , hack saw 7inchplus minus 1inch with blade set. , screw driver set_12nos. in one set , hand drill with drill bit set. , spanner 10 piece metric set. , spanner 10 piece imperial set. , soldering iron 6inch with soldering paste and solder wire 50 gms , sponge holder 10inch , can opener 6inch , tap cello , tape black , tape paper , punch 5inch , cold chisel 6inch , cold chisel , screw driver set , screw driver alignment , super glue adhesive , pliers cutter with grip long point nose , pliers cutter or grip combination , pliers flat jaw , pliers round jaw , cutter side 160 mmplus minus 10 mm , cutter side 120 mmplus minus 10 mm , fish line with hook , tweezers , probe straight and angular , wire brush , swiss army knife , tape measuring 4mtrplus minus 1 mtr , non- metallic probe , hand gloves , fire extinguisher bcf type 600 gm , bar level spike and cranked chisel ends 445 mmplus minus 10 mm , bar level cranked from and wedge ends 260 mmplus minus 10 mm , square driver socket set. , pick 560 mmplus minus 10 mm head , pry bar , thermal cutter , shovel round nose , misc. cleaning kit and user hand book for above equipments , carrying case made of metal or hdpe suitable for packing all above items with proper stowage ) /bid number : gem/2025/b/6577400 * /dated: 20-08-2025 & & / bid document 1 / 40
Tender For supply of reusable thermal insulation pads , aluminium foil laminated adhesive tape of 5 cm width , aluminium foil laminated adhesive tape of 10 cm width
Tender For bid to ras supply of various type of grp items d d - aerosil araldite d t705 , adhesive resin synth liquid with catal for bonding my 750 , hardner hy 880 , accelerator 08021 makers code no s 1021 , hylac polyster resin hsr 8131 , catalyst 8013 , hardner hy 951 adhesive synth hetic resin hardner , holdtite liquid sealant , rubberbasedadhesive light duty type , araldite hardner hy 830 , rtv silicon sealant , general purpose silicon sealant , araldite resin ly 556 , fibre glass surfacing mat 400m
Tender For supply of rubberbasedadhesive conforming to is: 2561-1963 or latest type heavy duty inthe pack of 1 ltrs tin . make dunlop s-758 or fevicol special repair 998 fw ,sr 505
Tender For expression of interest for providing, making and supplying furniture & furnishing items at all centres of navsari agricultural university (unit rate offer) - providing, supplying & installation of snap-fit modular wall paneling using 8mm pre-laminated cement fiber board the framework shall consist of 0.55mm thick cold-rolled g.i. perimeter channels (30x27x20mm) fixed at 600mm centers with nylon sleeves and wood screws. w shaped ceiling sections (26x50x26x80mm, gyptech or equivalent) shall be inserted horizontally and vertically to create a 600x600mm grid (or as per design) and fixed using appropriate screws.work includes marking levels on walls/partitions as per design, leaving allowance for panel thickness. installation shall use 8mm thick wood-textured pre-laminated cement fiber boards (make approved by nau authority) fixed in a modular snap-fit system.packing of solid pvc/marine ply to be provided as required. aluminum grid sections (24x9mm) extruded from 6063 grade alloy shall be fixed to the ceiling section, or directly on the wall/partition where space constraints exist. panels will be secured using 14x13mm snap-fit powder-coated or anodized aluminum clips. all work to be executed in true line and level, with approved finish and as per directions of engineer-in-charge., providing, supplying & installation of 12mm x 120mm prelaminated solid core wall paneling work includes providing and installing 12mm thick x 120mm wide prelaminated solid core wall panels (e-3 clad) with a seamless joining system. wall/surface to be prepared and marked for alignment and design. a grid of 50mm x 15/20mm solid pvc strips (density 550600 kg/m) shall be fixed to the wall at 600mm x 600mm spacing using screws. panels shall be mounted using double-sided adhesive tape and silicone adhesive (dow corning or equivalent). all work shall be completed in true line, level, and finish as per design and instructions of the engineer-in-charge., providing, supplying & installation of vox / pare brand thermal printed wall & ceiling paneling work includes supply and installation of 3mm thick x 340mm wide vox/pare brand thermal printed panels approved by nau authority) with a tongue-and-groove joining system for ceiling and wall paneling. levels shall be marked as per design, allowing for panel thickness. 0.55mm thick g.i. perimeter channels (30x27x20mm, make approved by nau authority) shall be fixed to walls/partitions at 600mm centers using nylon sleeves and wood screws. a 1200x1200mm hanger grid shall be marked on the ceiling/slab. 0.55mm thick g.i. hangers (18x18mm), cut 6" longer than the drop, shall be fixed to the slab and intermediate channels using self-drilling screws. 0.9mm thick c-sections (15x45x15mm) will be suspended at 12001500mm centers. overlaps of 6" shall be provided for extended lengths. 0.55mm thick w-sections (26x50x26x80mm) shall be fixed perpendicularly at 450600mm centers to form the ceiling grid. panels will be screw-fixed to the frame with longitudinal alignment across ceiling sections. panel joints will be finished using matching brand j sections (19x40mm) or connector profiles (76x12mm). all joints and caps will be bonded with cyanoacrylate adhesive (make approved by nau authority). work must be executed in true line, level, and finish as per approved design and under the supervision of the engineer-in-charge., providing, supplying & installation of snap-fit modular wall paneling using 12mm prelaminated wood chip particle board work includes installation of 12mm thick prelaminated wood chip base particle boards (make approved by nau authority) in a modular snap-fit paneling system. mark levels on walls/partitions as per drawings. fix 0.55mm thick g.i. perimeter channels (30x27x20mm, make approved by nau authority) at 600mm centers using nylon sleeves and wood screws. install 0.55mm thick w shaped ceiling sections (26x50x26x80mm) vertically and horizontally to form a 600x600mm grid, or as per design, secur