Latest rubber beading Tenders | Government rubber beading Tenders

Central Government And Public Sector

CTN :45716669

20 Jul, 2026 NA

Kamega - Arunachal Pradesh

Tender For supply of consumables for emergency maintenance of turbines of kameng hps - runner labyrinth coupling collar m24 hex head bolt of 3mm thead pitch, material: ss304. length: 15 mm hex head (af: 29.4 mm) + 5mm collar (dia: 44mm) + 40 mm threaded portion (m24, 3mm pitch), drawing attached., miv body seal hex head collared bolt. length: 15 mm head (af: 24mm) + 5mm collar (dia :33mm) + 48 mm threaded portion (m20, pitch: 2.5mm), material: ss304, drawing attached, top stationary labyrinth coupling stud m24x3mm pitch, length of stud: 115mm (30 mm threaded portion+ 25 plain portion + 60mm threaded portion), material: en24, drawing attached., bottom stationary labyrinth coupling stud m24x3mm pitch, length of stud: 80 mm (20 mm threaded portion+ 25 plain portion + 35 mm threaded portion), material: en24, drawing attached, cover plate for runner labyrinth coupling bolts, diameter: 46/50mm, thickness: 4mm (2mm + 2mm) as per attached drawing, material: ss316, bonded rubber seal id35xod42x 4mm thick, bonded rubber seal id43xod52x 4mm thick, bonded rubber seal id50xod58x 4mm thick, copper washer id16 x od28 x 3 mm thick, cap nut for top stationary labyrinth fastener as per attached drawing. material: en24, shaft seal gasket as per attached drawing:, material: neoprene rubber, size: od 1032mm x id 822 mm x 6mm thick, 32 nos. of ø19 mm equispaced holes at pcd 965mm, maximum temperature to handle: 80 deg-c, full threaded m36x280 mm stud with double nut & washer, material: ss304, locking wedge for ugb bearing pads. 1 set: two bars (one long and one short), material: hss. drawing attached

CTN :45718562

09 Jul, 2026 37.41 Lacs

Gorakhpur - Uttar Pradesh

Tender For supply of pedestral , anticockroach trap grating round frame , flush kit complete internal fitting ptmt float valve 15mm with epoxy coated aluminium rod and high density plastic ball , ply wood 8 feet x4 feet x6mm bwr gde as per is 303 , urinal with fixing accessories , flush kit complete internal fitting ptmt float valve 20mm with epoxy coated aluminium rod and high density plastic ball , rotational moulded polythelene water storage tank 3 layer cap 1000 litre white colour , door magnet catcher , mortise lock handle set 100 mm , cp ss toilet roll holder with flap , glass shelf 600mm long , rotational moulded polythelene water storage tank 3 layer cap 500 litre white colour , mortise lock handle set 160 mm , cp ss grab bar 300mm long , pvc corrugated waste pipe 32mm x 1150mm , pvc urinal waste pipe 32mm x 800mm , wc indian type 580x440mm , corner glass shelf with bracket , basin counter table top type , water storage tank cover lid white , ss curtain brackets , door stopper , ss studs with spacer 1inch x 1 inch for fixing glass mirror , steel braided connection pipe with cp brass nut 18 inch for hot water , transparent acrylic sheet for windows 5mm thick , ss jet spray butterfly with braided tube 1.5m , steel braided connection pipe with cp brass nut 24 inch for hot water , ply wood 8 feet x4 feet x4mm bwr gde as per is 303 , frosted obscure glass pane 5mm thickness , cp ss shower basket , ss studs with spacer 1 point 5 inch x 1 inch for fixing glass mirror , ss peg set of three , ptmt bib cock 15mm with flange , pvc corrugated waste pipe 32mm x 800mm , cp shower arm 12 inch , prelaminated particle board 8 feet x4 feet x19mm , pvc connection pipe with cp brass nut 18 inch , pvc connection pipe with cp brass nut 24 inch , ss full overlay concealed cabinet hinges 35mm 165 degree , braided hose 600mm long with m10x1 nipple, 15mm nut o ring and rubber washer suitable for tall boy basin mixers , ss peg set of six , steel braided connection pipe with cp brass nut 30 inch for hot water , aluminium sliding door bolt 200mm complete set with brackets , g.i. pipe 15mm medium grade , pvc connection pipe with cp brass nut 30 inch , pvc collapsible waste pipe 40mm x 800mm , aluminium door handle 150 mm , aluminium sliding door bolt 250mm complete set with brackets , braided hose 450mm long with m10x1 nipple, 15mm nut o ring and rubber washer suitable for basin mixers , cylindrical door locks with 3 keys , gi pipe 20mm medium grade , rubber beading for doors windows for pest snake control , ss butt hinge 100mm , french polish 400 ml pack , pvc collapsible waste pipe 32mm x 800mm , aluminium tower bolt 250mm , ss grating round 3 inch , ss butt hinge 150mm , aluminium tower bolt 150mm , ss grating round 4 inch with hole , wall putty 20 kg , upvc pipe 25mm , upvc union 25mm , ss grating round 3 inch with hole , aluminium door handle100mm , aluminium hasp and staple , g.i. union 20mm dia , upvc pipe 20mm , upvc pipe 15mm , ss grating round 4 inch , upvc union 20mm , gi union 15mm dia , gi gate valve 15mm dia , upvc union 15mm , m seal 100 gm pkt , teflon tape for plumbing , glazing putty for fixing glass pane , white cement , fevicol for wooden work 1 kg pack , ss screw 3 oblique 4 inch , upvc reducer 20 and 25mm , upvc tee 25mm , upvc elbow 25mm , gi tank nipple 20mm dia , gi socket reducer 15 and 20mm dia , gi tee 20mm dia , gi 20mm plug , gi nipple 20mm dia 2inch long , upvc reducer 15 and 20mm , upvc tee 20mm , nails 2 and half inch , nails 3 and 4 inch , gi elbow 20mm dia , gi socket 20mm dia , gi tank nipple 15mm dia , gi tee 15mm dia , upvc elbow 20mm , ss screw 1 inch 1 and //bid details 2 / 118 hald inch 2 inch 2 and half inch each size 4 kgs , gi nipple 15mm dia 2 inch long , gi 15mm plug , upvc tee 15mm , gi elbow 15mm dia , gi socket 15mm dia , upvc elbow 15mm , nails 1inch 1 point 5inch 2 inch and 3inch size 1 and half inch 8 kgs and rest each size 4 kgs , teak wood beading edging half round w 18mm x t 6mm , ply wood 7 feet x3 feet

CTN :45719794

20 Jul, 2026 19.43 Lacs

Murshidabad - West Bengal

Tender For procurement of different spares for chinese make elevators under emiph-i, sgtpp. - procurement of different spares for chinese make elevators under emiph-i, sgtpp., limit switch,car door contact,type:ds131 for seec express elevator 1no, ue-230vac/110vdc, ie-2a/0.5a, ui/ith-500v/10a, ip20, transparent enclosure ( please follow additional data: model: s3-1370b: normal close make: beto or model: ndox 41k ), shoe liner car guide shoe liners # shoe liner(car guide shoe liners) 1set/4pcs e.c.e ( please follow additional data: guide shoe; moc: nylon; dimension: 150mm x 30mm x 30mm (as per sample) ), landing door shoe for ece make elevator acme make: fermatorrn ( please follow additional data: door chanel shoe, dimension: 56mm x 40mm; thickness: 2mm with both side rubber. (as per sample) ), v belt, a 1180 ( please follow additional data: belt, qxpz 1180 cogged raw edge epdm wedge belt, fenner ), belt, timing, 3600-s8m-15, htd for seec express elevator car door type- high torque drive (htd) timing belt, length-3600mm, width-15mm, belt thickness- 5.6mm, tooth height-3.4mm, tooth pitch-8mm, material-neoprene rubber withfiber glass core., reed switch ( please follow additional data: for elevator (as per sample), sichuan express elevator co. ltd. ), vfd for car door astar s2 20p4a2 power 0.4 kw,i/p 220vac,50/60 hz,5.3 a,o/p 220vac,0-50 hz,3a.0.6 kva, oil pot(at feeder on car top) ( as per sample ), hooter industrial 230v ( with power back-up for sichuan express elevator co. ltd. ), rotary blower fan for elevator # ( car roof fan, crossflow fan, model: zqf-330 200, 230v ac, 25w, 1270/1350 rpm, 340/360 m3/hr ; make: ningbo grand fans co. ltd. ), switch,red,1no,call push button dia-37mm for seec express elevator 24vdc, illuminated, colour- red, flush mount ( landing: up/down-25 nos., car: open-close-15 (each); 1-5: 10 (each); 6-9: 5(each) ), board, lop,intl 2000-dv/v1 for seec express elevator sichuan express elevator co. ltd., door sensor (lambada),model:ms720 ( make- t l jones or equivalent ), rope oil for elevator rope usha wrl-60 usha martin, brake coil for hoist,230v ac ( please follow additional data: brake coil for sichuan express elevator co. ltd., coil voltage: 110v dc (as per sample) ), dynamic braking unit,cdbr-4030b,400 v yaskawa vvvf drive cimr f7a4030,30 kwfor s/r vvvf drive, expansion pcb for elevator intl 2000-ex sichuan express elevator co. ltd.

CTN :45724340

06 Jul, 2026 7.75 Lacs

Multi City - Telangana

Tender For procurement of leakage materials arresting of leakages and in division no.44, 45, 46,47,62,63 and 64 under annual maintenance for the year 2026-27 - 150 mm dia , 150 mm dia 15 mm thick , 160 mm dia , 200 mm dia , 200 mm dia 15 mm thick , 200 mm dia hdpe , 315 mm dia hdpe , 350 mm dia m.s , arresting of leakages at various locations in ward no. 44,45,46,47 &48 including earthwork excavation and arresting of leakages with required materials and red rock cement, portland cement, caulking, necessary apparatus leakage arresting and refilling of the excavated earth includind cost and conveyance of all tools materials and labour charges etc., complete. (a) 160 mm dia hdpe , cost of m.s flanges including cost of bolts, nuts, rubber packing etc., complete and flange thickness conforming to is:7322-1985 and flange dimensions conforming to is:1538-1993 excluding cost of ms specials including cost and conveyance to site etc., complete. (a) 100 mm dia 15 mm thick , manufacture, supply and delivery of di d/f gate valves (soft seated) resilient seated soft sealing gate valves (sluice valves) with body bonnet of ductile cast iron of grade ggg-40/ sg- 400/15 or ggg-50/sg-500/7 or equivalent grade as per i.s.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with epdm food grade quality and seals of nbr and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per bs5163-89/is14846-2000/din 3202 f 4. all the valves should be with electrostatic powder coating both inside and outside pocket less body passage. drilled as per requirement of the dept. (a) 100 mm dia , manufacture, supply, & delivery of hdpe fittings conforming to is 4984 - 1995 including transportation to anywhere in t.g. excluding taxes. pipe end long neck (a) 110 mm dia , manufacture, supply,& delivery of high density polyethylene pipes (pe-100 grade) for water supply conforming to is 4984-2016 including transportation to any where in t.g, but excluding gst and specials etc.,complete(supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 metres.) 8 kg (a) 110 mm dia hdpe , supply and delivery of 53 grade opc cement bags including all charges etc., complete as per the directions of the departmet officer in charge. , supply and delivery of frc cement supply 5 kg bag including all charges etc., as per the directions of the departmet officer in charge complete. , supply and delivery of nuts and bolts including all charges etc., complete.as directed by the deparment officer in charge. , supply and delivery of packing rope including all charges as per the directions of the departmet officer in charge. , supply and delivery of rubber sheet including all charges etc., as per the directions of the departmet officer in charge complete. , supply, fabrication and fixing in position of ms for windows and grills including cost and conveyance of all material and all labour chages for fabricating, fixing including cost of welding rods, power charges, xcluding cost of fixing in positio etc complete.

CTN :45543907

06 Jul, 2026 NA

Jabalpur - Madhya Pradesh

Tender For corrigendum : rear glass ( with rubber beading) for upgraded mpv 4x4 drg. no-2674-57-31 , wind shield glass ( with rubber beading) for upgraded mpv 4x4 drg. no-2673-57-31 , driver side glass ( with rubber beading) army ver. upgraded mpv 4x4 drg. no-2668-57-31 , co driver side glass ( with rubber beading) army ver. upgraded mpv 4x4 drg. no-2669-57-31 , side glass (trooper) with rubber beading army ver. upgraded mpv 4x4 drg. no-2667-57-31

CTN :45713155

07 Jul, 2026 NA

East Khasi Hills - Meghalaya

Tender For supply of water supply maint stores ppr gate valve and misc items for the qe jun 26 d d - ppr gate valve suitable for 25mm bore , ppr gate valve suitable for 63mm bore , ppr gate valve suitable for 32mm bore , gate valve bronze with screwed handle of size 25 mm bore medium grade , angle cock cp 15mm one way , gate valve bronze with screwed handle of size 50 mm bore medium grade , gi ppr cpvc tubing medium grade 63 mm bore , female socket for ppr pipe of 63mm bore , gi tubing medium grade 25 mm bore , bib cock brass 15mm bore , brass gun metal spindle with wedge nut for 150 mm sluice valve , female socket for ppr pipe of 40mm bore , gate valve bronze with screwed handle of size20 mm bore medium grade , gi tubing medium grade 15 mm bore , ppr union suitable for 63mm bore , gi tubing medium grade 100 mm bore , angle stop cock cp 15 mm two way , brass gun metal spindle with wedge nut for 100mm sluice valve , gun metal gate valve 40 mm , ppr union suitable for 32mm bore , gi ppr cpvc tubing medium grade 32 mm bore , bib cock 15mm ptmt , air release valve for geyser , cp bib cock 15mm bore , brass gun metal spindle with wedge nut for 80mm sluice valve , gi union 15mm , ppr equal tee suitable for 63mm bore , female socket for ppr pipe of 32mm bore , ppr reducer tee suitable for 63x32mm bore , ppr elbow suitable for 63mm bore , gi tubing medium grade 20 mm bore , pvc connection pipe 15 x 450 mm long , gate valve bronze with screwed handle of size 15 mm bore medium grade , cp connection 15x 600 mm long pipe , gi tee equal 15 mm bore , ppr reducer elbow suitable for 63x50mm bore , gi union 20mm , gi ppr cpvc tubing medium grade 15 mm bore , cp connection 15x450 mm long pipe , pvc float valve complete 50mm , pvc connection pipe 15 x 600 mm long , ppr elbow suitable for 32mm bore , gi long screw 15x75mm , ap3 grease , ppr reducer elbow suitable for 32x25mm bore , gi elbow 20mm , nipple gi 15x150mm long , gi union 25mm , ppr equal tee suitable for 32mm bore , nipple gi 20mm x 50mm long , gi elbow 15mm , gi union 40mm , gi socket reduced 25mm x 15mm bore , gi ppr cpvc tubing medium grade 20 mm bore , gi socket reduced 20mm x 15mm bore , gi tee equal 20mm bore , nut and bolt full thread with washer 80mm long for gyser , ppr socket 25mm , gi union 50mm , ppr reducer elbow suitable for 50x32mm bore , nipple gi 15x 250mm long , ppr union suitable for 20mm bore , nipple gi 20mmx75mm long , female socket for ppr pipe of 20mm bore , ppr reducer socket suitable for 63x32mm bore , elbow reducer 25x15mm , nipple gi 15x100mm long , ppr elbow suitable for 20mm bore , gi tee equal 25mm bore , nipple gi 15mm x 75mm long , ppr equal tee suitable for 25mm bore , rubber sheet for gasket as per sample , ppr reducer elbow suitable for 63x32mm bore , gi socket 20mm , gi nipple 50 x 100 mm long , gi nipple 40 x 100 mm long , gi socket 25 mm , gi socket 15mm , gi nipple 50 x 50 mm long , elbow reducer 20 x 15mm , gi nipple 40 x 50 mm long , tee reducer 15 x 20mm , gi socket 50 mm , tee reducer 15 x 25mm , gi bend 15mm , elbow 25 mm, isi mark , tee reducer 20 x 25mm , gi socket 20 mm , gi socket 40 mm , nipple gi 100mm dia and 15 cm long , nipple gi 100mm dia and 10 cm long , gi reduced elbow 15mm x 20 mm bore , gi bend 20mm , ppr socket equal 15mm bore , ppr equal tee suitable for 20mm bore , sluice valve 150mm bore , sluice valve 100mm bore , sluice valve 80mm bore , air release valve 150mm bore //bid details 2 / 86

CTN :45557135

02 Jul, 2026 NA

Pune - Maharashtra

Tender For corrigendum : supply of wind screen front , rubber beading , dvc assembly , brush gear assembly , bearing starter , bearing bush

CTN :45617042

06 Jul, 2026 1.47 Crore

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : tender for supply of drier unit complete , sea water pump , cyl dia50 m-c hp03-05 , cylinder dia 60 , valve flat 60 dia , pipe 1st stage inter cooler a , valve finger type dia50 cyl , gasket val flat to 60 head 0.75 , rubber beading , nipple 3-4inch x 3-4inch bsp , gasket big cyl , gasket small d , packing ring , o ring , oil pressure switch , gasket , nose ring , pressure switch , pressure gauge , 0-160 bar pressure gauge iii stage , 0-25 bar pressure gauge ii stage , 0-6 bar pressure gauge ist stage , gasket , flexible hose , sm-buffer , connecting rod , pressure gauge oil pressure , safety valve 3rd stage , gasket , gasket , one time replacement for desiccant , piston rings set 3rd stage , coalescing cartridge , sv assy 1-2inch , nrv assy 3-4inch bsp , filter assy i-l air b type , con rod & c-shaft assy hp03-05 , nrv assy 11-2inch bsp , ti150scu1x0013b temp switch , pressure gauge 3-8inch bsp , all indiacting lamps , hp10301 dp ns , safety valve 4th stage

CTN :45583799

01 Jul, 2026 NA

Amritsar - Punjab

Tender For corrigendum : supply of wash basins - vitreous sanitary appliances (vitreous china) conforming to is 2556 (part 4) (q3) , door handles (v2) isi marked to is 208 (q4) , lock stoppers as per is 1223 (q3) , steel butt hinges as per is 1341 (q3) , epdm rubber beading for passenger door (q3) , enamel, synthetic, exterior (a) undercoating (b) finishing (v4) confirming to is 2932 (q3) , wood screws (q3)

Central Government And Public Sector

CTN :45681142

09 Jul, 2026 NA

West Champaran - Bihar

Tender For supply of spares and servicing of batch type centrifugal and continuous machine at hbl plant sugauli, east champaran and lauriya, west champaran, bihar - ht bolt full threaded (12x40mm) ht bolt half threaded (10x40mm) ht bolt full threaded (8x25mm) ht allenkey bolt (12x65mm) ss allenkey bolt (12x30mm) ss allenkey bolt (12x35mm) ss bolt (8x15mm) v-seal (alt-1) v-seal (alt-2) buffer pad nickel screen lock patti motor pulley suitable for 1600 rpm for nk 1100 rubber hose pipe (1/4 inch x 1mtr) rubber hose pipe (1/2 inch x 1mtr) rubber buffer rubber star plough up/down seal kit plough in/out seal kit mtc cylinder nozzle pipe (ss) set bottom valve up/down seal kit teflon segment v-seal (alt-1) v-seal (alt-2) massecuite distribution plate set taper wedge

Rubber Beading Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government And Public Sector