Latest rubber board Tenders | Government rubber board Tenders

Central Government/Public Sector

CTN :42533470

12 Nov, 2025 NA

Palakkad - Kerala

Tender For supply of 3 hp submersible motor and installation at rubber board regional nursery kanhikulam

Central Government/Public Sector

CTN :42483212

10 Nov, 2025 NA

Palakkad - Kerala

Tender For supply of one brush cutter at rubber board regional nursery kanhikulam

Central Government/Public Sector

CTN :42377006

08 Nov, 2025 8.97 Lacs

Pondicherry - Pondicherry

Tender For custom bid for services -calibration services; annual maintenance contract (amc) for ground support equipment (gse) and electrical equipment held with icgae puducherry and 848 sqn (cg) shall cover the following salient features: - 1. to maintain all the gse in good working /serviceable condition at all times as per appendix a , b & c 2. one supervisor (diploma equivalent) along with 01 labor technicians to be placed at coast guard air enclave for the daily routine/ monitoring of amc jobs on gse. 3. replacement of all consumables including various graded oil, seals, filters, belts, pneumatic hose, wheels & rubber beading etc. at seller cost as per scope of work / scheduled of requirements. the consumables and oil should be oem specified wherever applicable and for other cases locally available standard quality item which has been checked and cleared for use by station qa cell. 4. painting of gse twice a year in yellow colour paint (two times in entire contract) as per cgae directives after complete removal of old paint to the bare metal and application of new paint up to 50 m on appendix- a s/l-40, 41 and appendix- b s/l 01-04 & 8. painting is not to be undertaken on nuts, bolts, screws and it is to be applied with only approved grease. 5. recharging of nitrogen cylinder (max. 3000 psi with 99.9% purity n2) as mentioned below from central/state govt certified local agency/govt agency with documentary proof for records post n2 charging. hst of cylinder & lp compressor are also to be carried out whenever due with documentary proof. 5.1 appendix- a s/l-02:- 5-6 times per year, max. 3000 psi with 99.9% purity n2 as and when cylinder pressure is less than 500 psi. 5.2 appendix- a s/l-17:- (portable tyre charging rig) 4 times per year. 6. calibration of gauges fitted on gse to be carried out from nabl certified labs as mentioned in appendix a , b & c and certificate to be provided. 7. the scope of works shall include the repairs/ servicing of all the component/equipment of gse including consumables/spares (required for repairing/servicing) the amc firm will bear the cost of repairs of equipment limited to 10% cost of contracted value . 8. in case unit is not satisfied by the service provided by the firm, amc will be terminated after giving warning letter/ notice of one month. it is to be clearly understood that during the grace period of one month, firm will continue to provide services. 9. if the defect / fault is not rectified within 72 hours of its occurrence, this unit deliberate will reserve the right to deduct the proportionate amount for the unserviceability period. 2 10. all the personnel employed for maintenance duty are to be in possession of the following: 10.1 aadhar card and company identity card. 10.2 no police case/vigilance case certificate. 10.3 two sets of uniforms with name of firm embossed/ embroidered on uniform for ease of identification. 10.4 safety shoes, safety gloves, safety helmet, safety goggles of standard quality to be provided to all persons. 11. safety and security of the personnel employed is the responsibility of the firm and any minor or major injury occurring to the individual is not the responsibility of the cgae puducherry or 848 squadron personnel. 12. working hours of the personnel are from 0900-1730 hrs (06 days in week) and they are to provide their contact number to the respective section in charge of gse for contact.

CTN :42485790

12 Nov, 2025 NA

Barmer - Rajasthan

Tender For supply of consumables - taparia tester , tools allen key sets mm , tools allen key sets inch , meco make multimeter model no. , supply of klin-it contact cle , rustlick 631 make ,itw signo , electronic component cleaner , wd 40 in 400ml can , supply of superlock nylon 150 mm , supply of superlock nylon 100 mm , 0.25 inch pvc tube of 1 meter , round insulated lugs 0.5 sq mm , round insulated lugs 0.75 sq mm , insulated 1.5 sq.mm lugs pin , pin and ring type insulated lug , ring type insulated lugs size , u type 1.5 sq mm copper tinne , ferrule and cap 0.5 inch ss , ferrule and cap 0.25 inch ss , green pvc sleeves 0.5 sq mm , green pvc sleeves 1.5 sq mm , measuring tape 5 mtrs stanle , ss cable ties , loctite 406 , loctite 495 , loctite 243 , neoprene rubber sheet industri , ss fitting 0.25 inch tube fitting, male conn , ss fitting 0.25 inch tube fitting, female conn , ss tube fitting, 0.25 inch male branch tee , ss tube fitting, union 0.25 inch tube od , ss fitting 0.25 inch elbow, 0.25 inch tube odx0.25 , ss fitting 0.25 tube odx 0.5 male npt , ss fitting elbow,0.25 tube odx 0.5 male npt , ss fitting 0.5 inch tube fitting, male conn , ss fitting 0.5 inchtube fitting, female co , ss tube fitting,male branch tee 0.5 inch tu , ss tube fitting,union 0.5 inch tube od , ss fitting 0.5 inch elbow, 0.5 inchtube odx0.5 , ss fitting 0.5 inchtube odx0.25 inchmale npt , ss fitting elbow, 0.5 inch tube odx 0.25 inch mal , teflon tape , 2 inch aluminum tape , insulation tape , supply of screw less non fuse , supply of screw less fuse tb , cable gland adapter, 0.5 inch npt m x 0.75 inch , cable gland adapter, 0.75 inch npt m x 0.5 inch , 0.5 inch npt ss cable gland , s of 0.75 inch npt cable gland , s of 0.75 inch et cable gland , s of 1 inch npt cable gland , s of 1 inch et cable gland , s of 1.25 inch npt cable gland , s of 1.5 inch npt cable gland , supply og 0.5 inch u clamp , supply of 0.5 inch u clamp ss , supply of 0.75 inch u clamp ss , silicon greese , supply of plastic tags , ss 304 wire , ceramic fiber rope , dowsil 732 sealant , tiki kote, black sali kote , 100 ohm resistor , 250 ohm resistor , 750 ohm resistor , 1000 ohm resistor , rubber o rings for transmitters , rs232 to rs485 convertor , usb convertor , supply of extension board , supply of pressure gauge , supply of junction box , supply of rechargeable pocket torch , supply of ma loop calibrator , supply of adjustable spanner small size

State Government

CTN :42379628

17 Nov, 2025 13.81 Crore

Ahmedabad - Gujarat

Tender For dismantling, providing, fabricating and erecting various component such as gate leaf assembly (including skin plate, rubber seal, guide roller, lifting bracket), horizontal girder assembly, arm assembly, turn buckle, replacement of trunnion assembly for 27gates and servicing of trunnion assembly for 27 gates, foot bridge, servicing and alignment of gear train and dial indicator etc. complete repair work of radial gate size 30 x 20 - 54 no. of und-2 irrigation scheme (dist: jamnagar)

Central Government/Public Sector

CTN :42421943

10 Nov, 2025 1.19 Lacs

Kottayam - Kerala

Tender For supplying rubber wood dining chairs for canteen hall no. 1, rrii, rubber board, kottayam

Central Government/Public Sector

CTN :42507484

05 Nov, 2025 NA

Kottayam - Kerala

Tender For green/brown budding on rubber seedlings at rubber board central nursery, mukkada

corporations/Associations/Others

CTN :42486718

10 Nov, 2025 NA

Multi City - Multi State

Tender For auction sale of alluminium scrap,boot dms,bty mt o/s,clothing o/s (cap water proof, over all combination),clutch pressure plate,cotton rags,cwp,fip assy all type,fire ext o/s,gunny old,jack all type,machinery o/s,mild steel scrap,mt scrap,road wheel spring,rubber scrap,harden steel scrap,tarpaulin old,tent o/s,tube inner,tyre o/s,wheel disc,mt component,gun grease,clothing o/s (woolen scrap, o/a combination,cwp),electric scrap,boot o/s,ms scrap,cwp o/s,tarapaulin old,cwp o/s (18/i),blanket o/s,jack all type,web eqpt and misc,boot o/s,wooden scrap,clothing o/s (woolen scrap),telephone set o/s,boggi wheel (bmp)

Central Government/Public Sector

CTN :42357883

31 Oct, 2025 NA

Kottayam - Kerala

Tender For development of root trainer rubber plants using experimental clones / budwood supplied by the rubber board - 16000 nos.

State Government

CTN :42333003

06 Nov, 2025 7.07 Lacs

Ukai - Gujarat

Tender For supply of rubber items for coal mill unit 3, 4 & 5 of gsecl ukai tps.(et-6089 bmd-ii) - neoprene rubber gasket for es 18l coupling as per drg no: utps/b/2682 of coal discharge pipe, viton seal kit for 12" bore x 700 mm stroke pneumatic cylinder for twin flap gas tight isolator, o ring for roller assly. as per drg. no.utps/b/3171, o ring for hot air shut off gate cylinder cover as per drg.no.utps/b/3071 size :o.d.-157mm,i.d.-152mm,qty.04 nos/mill., o ring for hot air shut off gate piston disc as per drg.no.utps/b/3072, u shape air seal for h.a.s.gate piston (type-i & ii) as per drg.no. utps/b/v/3070, rubber ring for h.a.s.gate as per dimensions o.d.-45mm i.d.-35mm thickness-06mm, neoprene rubber ring size 63 x 75 x 14 for spring assly.adaptor sleeve as per the drg.utps - b - 6232, neoprine oil seal size 48 x 62 x 10 mm, neoprine oil seal size 32 x 54 x 10 mm, neoprene oil seal size 57 x 77 x 10 mm, neoprene oil seal size 107 x 133 x 12 mm, neoprene oil seal size 35 x 47 x 8 mm, neoprene oil seal size 22 x 41 x 10 mm, neoprene oil seal size 22 x 42 x 10 mm, neoprene oil seal size 38 x 60 x 10 mm, o ring of neoprene rubber size 58 x 62 x 2 mm, o ring of neoprene rubber size 111 x 117 x 3 mm, o ring of neoprene rubber size 211 x 217 x 3 mm, o ring of neoprene rubber size 56 x 60 x 2 mm, o ring of neoprene rubber size 140 x 146 x 3 mm, foreshed v rubber ring size 34 x 42 x 5 mm, gravimetric feeder weigh component door rubber gasket as per the drawing no.utps - b - 6025., gravimetric feeder access door rubber gasket as per the drawing no.utps - b - 6024., gravimetric feeder take up pulley housing rubber gasket as per the drawing no.utps - b - 6026., rubber gasket for center feed pipe (bunker to feeder) as per drg.no.utps/b/6034., neoprene rubber gasket for es 18l coupling as per drg no: utps/b/2682 of coal discharge pipe, viton seal kit for 12" bore x 700 mm stroke pneumatic cylinder for twin flap gas tight isolator, o ring for roller assly. as per drg. no.utps/b/3171, o ring for hot air shut off gate cylinder cover as per drg.no.utps/b/3071 size :o.d.-157mm,i.d.-152mm,qty.04 nos/mill., o ring for hot air shut off gate piston disc as per drg.no.utps/b/3072, u shape air seal for h.a.s.gate piston (type-i & ii) as per drg.no. utps/b/v/3070, rubber ring for h.a.s.gate as per dimensions o.d.-45mm i.d.-35mm thickness-06mm, neoprene rubber ring size 63 x 75 x 14 for spring assly.adaptor sleeve as per the drg.utps - b - 6232, neoprine oil seal size 48 x 62 x 10 mm, neoprine oil seal size 32 x 54 x 10 mm, neoprene oil seal size 57 x 77 x 10 mm, neoprene oil seal size 107 x 133 x 12 mm, neoprene oil seal size 35 x 47 x 8 mm, neoprene oil seal size 22 x 41 x 10 mm, neoprene oil seal size 22 x 42 x 10 mm, neoprene oil seal size 38 x 60 x 10 mm, o ring of neoprene rubber size 58 x 62 x 2 mm, o ring of neoprene rubber size 111 x 117 x 3 mm, o ring of neoprene rubber size 211 x 217 x 3 mm, o ring of neoprene rubber size 56 x 60 x 2 mm, o ring of neoprene rubber size 140 x 146 x 3 mm, foreshed v rubber ring size 34 x 42 x 5 mm, gravimetric feeder weigh component door rubber gasket as per the drawing no.utps - b - 6025., gravimetric feeder access door rubber gasket as per the drawing no.utps - b - 6024., gravimetric feeder take up pulley housing rubber gasket as per the drawing no.utps - b - 6026., rubber gasket for center feed pipe (bunker to feeder) as per drg.no.utps/b/6034.

Rubber Board Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors