Latest rubber bushing Tenders | Government rubber bushing Tenders

Central Government/Public Sector

CTN :45337091

29 May, 2026 NA

Bengaluru - Karnataka

Tender For supply of stretchers: generic purpose stretcher is used for emergency and rescue operations to safely and efficiently transport injured or sick individual product specifications unfolded length of the stretcher ( in cm) with tolerance of ?10 cm 200 unfolded width of the stretcher ( in cm) with tolerance of ?10 cm 50material of the stretcher pvc/nylon frame available in stretcher :yes (aluminium/ stainless steel) poles foldable feature yes number of fold in pole 1 minimum load carrying capacity 150 kg feet/hinge available to prevent stretcher bed from touching the floor:yes wheels available under feet: no number of wheels :na rubber hand grips for poles :yes patient's safety belt available: yes accessories carry case provided :yes certification compliance to drugs and cosmetic act 1940 and rules including medical device rules (mdr) 2017 as amended till date yes availability of valid medical device license/registration for the product issued from the competent authority yes valid cdsco medical device license/ registration number mfg/md/2024/000680 licence/registration issuing authority as per mdr state licensing authority. ]

Central Government/Public Sector

CTN :45338299

25 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of various size of di- electrical safety shoes, electric shock resistant up to 30 kv as per attached specification. technical specification for art 9721w product: 30kv dielectric boot with steel toe. 1). size range : 6-11 no. 2).type of construction vulcanized rubber upper and sole. 3).last/ sole patternpsv & vsv/ st 4).specialty tested individual boots at 30kv under wet condition 5).recommendation for working environment with high voltage hazards power station operations substation/ohe (step-up/ step-down/ distribution) operations electrical hazards with wet condition/ water exposure high current leakage hazards electrical installations. 6). compliance- astm f2413-18 m i/c eh european standard ce approved ? en iso 20345 : 2011 (sb e fo hro sra) en 50321-1:2018 class 3 ac (for installations with nominal voltage up to 26500v a.c. sb = standard basic protection as per en iso 20345 e= heel energy absorption fo = fuel oil resistant outsole hro = resistant to hot contact sra = slip resistance on ceramic tile/stone ballast with sodium lauryl sulphate csa z195-14 / astm f 2413-18 grade 1 toe protection compression resistance, 11kn 18 kv electric shock resistance (esr) protection. 7). dielectric footwear* astm f1117-03(2013) (min 20,000vac) 8). lining material selected polyester grade lining comes with extra comfort and durability 9). upper construction leak-proof (electrically verified) reinforced rubber upper high visibility with orange and green contrast easy for cleaning. 10). sole / heel electrical shock resistant sole suitable for high voltage/ current environment slip resistant vulcanized rubber outsole good abrasion resistant for extra durability heel energy absorption design to minimize the heel impact. 11). steel toe cap epoxy coated toe caps for anti-corrosion meets csa z195 impact and astm f2413 compression tests. 12). chemical resistance sole & upper -good resistant towards acids and alkalis 13). finishing lacquer coating for weather protection. 14). packingrecyclable polybag & 6 pairs in a carton. various sizes of electrical safety shoe as per requirement (size 6-11 no). [ warranty period: 30 months after the date of delivery ] ]

CTN :45296804

01 Jun, 2026 NA

Delhi - Delhi

Tender For supply of assy receiver drier , kit of condensor assy complete , qs 90 compressor assy complete , miniature relay 12v 20a , assy rubber bushing , assy kit lined shoe rr

corporations/Associations/Others

CTN :45046708

13 Jun, 2026 5.54 Crore

Multi City - Karnataka

Tender For corrigendum : supply of air suspension parts to the divisions of the nwkrtc. - nw-26-washer 22 mm - shock absorber , nw-26-washer 18 mm - shock absorber , nw-26-volvov air bellows, nw-26-volvo shock absorber-4, nw-26-volvo shock absorber-3, nw-26-volvo shock absorber-2, nw-26-volvo shock absorber-1, nw-26-volvo rubber bushing (shock absorber rubber bush), nw-26-volvo mounting plate air spring upper, nw-26-volvo gas spring side hatch 700n, nw-26-volvo bump stop, nw-26-volvo bellows-3, nw-26-volvo bellows-2, nw-26-volvo bellows-1, nw-26-volvo air spring (front bellow assy), nw-26-volvo air spring, nw-26-volvo air bellows-2, nw-26-volvo air bellows-1, nw-26-ud special nut bolt - engine, nw-26-ud rubber bushing, nw-26-ud bush - rear reaction top rod (75mm bush), nw-26-ud rear reaction rod top (rear v stay), nw-26-ud bush (v bar 85mm bush) - rear reaction rod , nw-26-ud rear reaction rod, nw-26-ud rubber spring - rear anti-roll bar , nw-26-ud reaction rod (front v stay), nw-26-ud reaction rod, nw-26-ud link rod - front (u bar), nw-26-ud front shock absorber assy, nw-26-ud bush (66mm) - front reaction rod , nw-26-ud front reaction rod, nw-26-ud front link rod, nw-26-ud bushing - front anti roll bar, nw-26-ud front and rear shock absorber, nw-26-ud ecas distance sensor, nw-26-ud connecting pin, nw-26-ud clamp (hanging bush), nw-26-ud bumper block, nw-26-ud altitude valve control rod assembly-3, nw-26-ud altitude valve control rod assembly-2, nw-26-ud altitude valve control rod assembly-1, nw-26-ud air spring (bellow) rear, nw-26-ud air spring (bellow) front, nw-26-tata/ley taper pivot bolt , nw-26-tata/ley connecting rod , nw-26-tata spherilastic bush taper lpo 1616, nw-26-tata bs6 shock absorber front, nw-26-tata bs6 bush/cut bush set - rear anti roll bar, nw-26-tata bs6 bush - rear anti roll bar , nw-26-tata bs6 bush - front anti roll bar, nw-26-taper sleeve, nw-26-steel piston 12 inch - single hole, nw-26-steel piston 12 inch - double hole, nw-26-spring washer - m16 , nw-26-split pin 3/16 x 2 1/2, nw-26-ley slf shock absorber-2, nw-26-rubber washer - bump stop, nw-26-rubber connector assly, nw-26-rubber bush - shock absorber , nw-26-rear axle sub compound link tc, nw-26-nylon tube - 8mm , nw-26-nylon tube - 6mm , nw-26-nylock nut - m16x2 , nw-26-nylock nut, nw-26-male elbow m12x1.5mm, nw-26-male connector, nw-26-machined washers - m24 , nw-26-machined washers , nw-26-machined washer ms - m16 , nw-26-m.bolero rear shock absorber, nw-26-m.bolero front shock absorber, nw-26-ley bs4 support bracket lh , nw-26-ley bs4 spherilastic bush, nw-26-ley slf u bolt m24x1.5x378mm, nw-26-ley slf suspension bolt (special bolt half threaded), nw-26-ley slf suspension bolt, nw-26-ley slf spigot , nw-26-ley slf spherilatic bush with pin , nw-26-ley slf shock absorber-1, nw-26-ley slf nyloc nut - m24x1.5 , nw-26-ley slf nut - suspention bolt, nw-26-ley slf anti roll cut bush rear , nw-26-ley slf alien bolt - m16x2x130mm, nw-26-ley bs4 shock absorber front 6.5t, nw-26-ley bs4 shock absorber, nw-26-ley midi bs4 stablizer holder asm, nw-26-ley midi bs4 bush - rubber-2, nw-26-ley midi bs4 bush - rubber-1, nw-26-ley midi bs4 rear shock absorber assy, nw-26-ley midi bs4 pull rod assy with bush , nw-26-ley midi bs4 front shock absorber assy, nw-26-ley midi bs4 bracket - suspension holder, nw-26-ley bs4 front shock absorber, nw-26-ley bs4 dowtee washer m26, nw-26-ley bs4 coller bush, nw-26-ley bs6 solenoid ptfc24v, nw-26-ley bs6 rear shockabsorber plate, nw-26-ley bs6 pallakki bellow air spring, nw-26-ley bs6 front shock absorber bottom-2, nw-26-ley bs6 front shock absorber bottom-1, nw-26-ley bs4 rubber pad assly, nw-26-ley bs4 retaining plate, nw-26-ley bs4 rear rubber air bellow 12 inch, nw-26-ley bs4 m16 spring washer , nw-26-ley bs4 levelling valve repair kit, nw-26-ley bs4 levelling valve assy , nw-26-ley bs4 air leveling valve lever, nw-26-ley bs4 air spring assly , nw-26-tata bs3 hex nut - m16x2, nw-26-tata bs3 hex bolt with nut -m16x2x100, nw-26-tat

CTN :45304567

08 Jun, 2026 4.60 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground - development of vankulathuvayal stadium in azhikode grama panchayath in azhikode lac, kannur -supply and installation of outdoor gym equipment - supply and installation of horse rider having the following specifications: dimensions: (l x w x h) 1140 x 400 x 1400 mm. main frame - 114 mm od b class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. foundation cover cap - dome shape of pp / nylon / hdpe material. remaining frame is made by 48 mm od b class gi pipe. seat frame is made by 48 mm od b class gi pipe. seat position must be horizontal to 110 -120 degree. link - made up of 48 mm od b class g.i. pipe. angle between link and ground position is 10-20 degree. handle - 33 mm od b class gi pipe. paddle vertical support - 60 mm od b class gi pipe. handle frame- 42 mm od b class gi pipe dually bending design. foot pipe - 33 mm od b class gi pipe. support frame 10 mm thick ms flat is used. seat- dimension 320 x 270 x 100 mm blow moulded wall thickness 4mm material hdpe. bearing bush closing cap pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brand. bearing bushes - 60mm od seamless pipe. pin made of 25 mm m.s. bright bar. grips - high quality rubber 46 mm od. circlips a 24 circlips are used for assembly. coating - best quality of powder coating 60 to 70 micron. safety instructions and exercise chart - start &finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405586/2025-2026 leg press (double) - specifications: dimensions: (l x w x h) = 1676 x 400 x1500 mm. main frame - 114 mm od ?b? class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. foundations cover cap - dome shape of pp / nylon / hdpe material. link - is 60 mm od b? class gi pipe. seat frame - 42 mm od b class gi pipe. leg press back rest should be angled in 120 -130 degree. footrest - cast iron 124 x 296 x 5 mm thick and m.s plate of 2 mm thick use to support it. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. link connected with frame by 8 mm thick laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material. closing cap?s- pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing- use is 6005 permanent lubricated reputed brand. pin 25 mm m.s. bright bar pin. bearing bushes - 60 mm od seamless pipe. circlip? a 24 circlips are used for assembly. coating - best quality of powder coating 80 -120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405583/2025-2026 back extension - supply and installation of back extension having the following specifications: dimensions: (l x w x h) 1060 x 730 x 990 mm. main frame - made from 88 mm od b class g.i. pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. leg support - 42 mm od b g.i pipe. seat rest pipe 42 mm od b class g.i pipe. handl

CTN :45138857

30 May, 2026 NA

Howrah - West Bengal

Tender For supply of various size of di- electrical safety shoes, electric shock resistant up to 30 kv as per attached specification. technical specification for art 9721w product: 30kv dielectric boot with steel toe. 1). size range : 6-9 2).type of construction vulcanized rubber upper and sole. 3).last/ sole pattern psv & vsv/ st 4).specialty tested individual boots at 30kv under wet condition 5).recommendation for working environment with high voltage hazards power station operations substation (step-up/ step-down/ distribution) operations electrical hazards with wet condition/ water exposure high current leakage hazards electrical installations. 6). compliance- astm f2413-18 m i/c eh european standard ce approved ? en iso 20345 : 2011 (sb e fo hro sra) en 50321-1:2018 class 3 ac (for installations with nominal voltage up to 26500v a.c. sb = standard basic protection as per en iso 20345 e= heel energy absorption fo = fuel oil resistant outsole hro = resistant to hot contact sra =slip resistance on ceramic tile with sodium lauryl sulphate csa z195-14 / astm f 2413-18 grade 1 toe protection compression resistance, 11kn 18 kv electric shock resistance(esr) protection. 7). dielectricfootwear* astm f1117-03(2013) (min 20,000vac) 8). lining material selected polyester grade lining comes with extra comfort and durability 9). upper construction leak-proof (electrically verified)reinforced rubber upper high visibility with orange and green contrast easy for cleaning. 10). sole / heel electrical shock resistant sole suitable for high voltage/ current environment slip resistant vulcanizedrubber outsole good abrasion resistant for extra durability heel energy absorption design to minimize the heel impact. 11). steel toe cap epoxy coated toe caps for anti-corrosion meets csa z195 impact andastm f2413 compression tests. 12). chemical resistance sole & upper - good resistant towards acids and alkalis 13). finishing lacquer coating for weather protection. 14). packing recyclable polybag & 6pairs in a carton. various sizes of electrical safety shoe as per requirement (size 6-10). (size and quantity details furnished in annexure). [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45077852

04 Jun, 2026 NA

Rajkot - Gujarat

Tender For supply of various size of di- electrical safety shoes, electric shock resistant up to 30 kv as per attached specification. technical specification for art 9721w product: 30kv dielectric boot with steel toe. 1). size range : 5-11 2).type of construction vulcanized rubber upper and sole. 3).last/ sole pattern psv & vsv/ st 4).specialty tested individual boots at 30kv under wet condition 5).recommendation for working environment with high voltage hazards power station operations substation (step-up/ step-down/ distribution) operations electrical hazards with wet condition/ water exposure high current leakage hazards electrical installations. 6). compliance- astm f2413-18 m i/c eh european standard ce approved en iso 20345 :2011 (sb e fo hro sra) en 50321-1:2018 class 3 ac (for installations with nominal voltage up to 26500v a.c. sb = standard basic protection as per en iso 20345 e= heel energy absorption fo = fuel oil resistantoutsole hro = resistant to hot contact sra =slip resistance on ceramic tile with sodium lauryl sulphate csa z195-14 / astm f 2413-18 grade 1 toe protection compression resistance, 11kn 18 kv electric shock resistance (esr) protection. 7). dielectricfootwear* astm f1117-03(2013) (min 20,000vac) 8). lining material selected polyester grade lining comes with extra comfort and durability 9). upper construction leak-proof (electrically verified)reinforced rubber upper high visibility with orange and green contrast easy for cleaning. 10). sole / heel electrical shock resistant sole suitable for high voltage/ current environment slip resistant vulcanizedrubber outsole good abrasion resistant for extra durability heel energy absorption design tominimize the heel impact. 11). steel toe cap epoxy coated toe caps for anti-corrosion meets csa z195 impact andastm f2413 compression tests. 12). chemical resistance sole & upper - good resistant towards acids and alkalis 13). finishing lacquer coating for weather protection. 14). packing recyclable polybag & 6pairs in a carton. various sizes of electrical safety shoe as per requirement (size 6-11 as per attached chart) [ warranty period: 12 months after the date of delivery ]

CTN :45263810

04 Jun, 2026 7.37 Lacs

Jhajjar - Haryana

Tender For supply of hardware items for w.s. mech division jhajjar under jws circle jhajjar of irrigation department haryana. - rubber jain/ packing 6mm thick 6" dia black color, rubber jain/ packing 6mm thick 5" dia black color, rubber sheet, g.i wire, pvc flapped nipple 6" dia as per is210, reflax valve 5" cast iron both end flanged 5"x5" heavy duty is 5388, reflax valve 6"cast iron both end flanged 6"x6" heavy duty is 5388, impeller shaft 6"x 6" kirloskar make as per sample, pvc tape roll isi marked is:7809/iii, ci impeller kirloskar make, tyre coupling tc-11, polythene sheet, plastic tripaline heavy duty, m.s. nut with bolt 5/8x3"hexagonal head isi 1363 product grade-c, m.s. nut with bolt 5/8x2 1/2"m.s. black isi 1368 (part-1) 2002 for bolt isi , m.s. nut with bolt 1/2x2 1/2"m.s. black isi1368 (part-1) 2002 for bolt isi project grade c, m.s. nut with bolt 5/8 x3"m.s. black isi1368 (part-1) 2002 for bolt isi project grade c

CTN :45252431

29 May, 2026 1.00 Lacs

Gurdaspur - Punjab

Tender For supply of gear shift lever , reverse light switch , relay 24 v , assy combination switch , rubber elbow , water pump repair kit , wheel cyl rep kit , rubber hose air filter outlet , release lever rep kit , speedometer head , fuel flexible pipe , clutch release brg , oil supply tube , bent rubber tube , rubber bushing , hose assy , fan eng cooling , rear brk shoe , solenoid switch

Central Government/Public Sector

CTN :45259677

08 Jun, 2026 NA

Morbi - Gujarat

Tender For instruments/other items (part-2 of 6) - middle ear surgery set with acceossries us fda approved fisch perforator, diameter 0.5 mm, length 16 cm, 1 no., 354, middle ear surgery set with acceossries us fda approved fisch caliper, angled shaft, diameter 0.6 mm, marker pin at 10 mm, len gth 16 cm, 1 no., 358, middle ear surgery set with acceossries us fda approved pick, 45, size 2.5 mm, length 16 cm, 1 no., 362, universal bronchoscope, size 7.5, outer diameter 10.2 mm, inner diamet er 9.5 mm, lengith 43 cm, adult broncjoscope set and acessories with us fda and ce approved, 1 no., 366, full lumen operating bronchoscope, size 12 mm, length 43 cm, with 32 f r. working channel for application of bronchial bougies,adult broncjoscope set and accessories with us fda and ce approved, 1 no., 370, sealing cap, with rubber seal, for use with bronchoscopes and tracheoscopes adult broncjoscope set and accessories with us fda and ce approved, 1 no., 374, lnstrument guide, for suction catheter adu lt broncjoscope set and accessories with us fda and ce approved, 1 no., 378, forward oblique telescope 30" enlarged view, diameter 4 mm, i ength 30 cm, autoclavable, fihr optie light adult broncjoscope set and accessories wtth us fda and ce approved, 1 no., 382, full lumen operating tracheo scope, modified to application of polyfl ex stents, inner diameter 13 mm, distal end with 45 oblique beak, for use with prismatic light deflector 101o1 f, size 14 mm, length 33 cm c lor code: blue us fda approved, 1 no., 386, rigid suction tube, outer diameter 4 mm, working length 55 cm us fda approved, 1 no., 390, foreign body basket, with ring handle, working length 50 cm us fda approved, 1 no., 394, highperformance led cold light fountain with one light outlet, power supply 100 240 vac, 50/60 hz us fda and ce approved 150 led, 1 no., 398, handheld portable video otoscope, use : ent examination, suitable for clinics, hospitals,display3inch lcd, resolution640*480(rgb),power2w, weight280g,illuminancenatural white(6 leds),resolution 1280*720px,image/video function:yes, outputusb output easy to storage and establish image/video,memory type: micro sd card 8gb | battery type: rechargeable lithium battery | capacity: 1350mah | cycle life of battery: >300 times | battery working time: >240min | charging time: 2 hrs accessory scopes: product: otoscope | total length of scope: 140mm | working length: 90mm | max od: 4.2mm | direction of view: 0, 1 no.

Rubber Bushing Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector