Get complete information related to latest Rubber Channel Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Rubber Channel Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Rubber Channel Tenders.
Tender For supply of major kit for caliper , air filter element , element oil filter , rubber pillion footrest , base rubber , seal rubberchannel , fuel pre filter , assy oil filter , shaft seal , assy pipe coolant , cable assy speedometer , speedometer head
Tender For providing electrical supply and fixing windows to new municipal office building in piduguralla municipality under special grant any government/general funds - 1 flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over cc bed already laid or rcc roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials. 2 flooring with non - skid red or white full body ceramic floor tiles of size 600 x 600 mm and thickness between 8 - 10 mm 1st quality conforming to is:13711, is:13712, is:13630 (parts 1 to 15) of any colour and finish in all shades and designs set over base coat of cement mortar (1:8), 12 mm thick over cc bed already laid or rcc roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete. 3 providing skirting to internal walls to 15cm height/risers of steps with soluble salt porcelain vitrified tiles screen printed and polished of size 600 x600mm and thickness between 8-9mm 1st quality set over base coat of cm (1:5) 12mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work, 4 dadooing to walls with glazed red or white full body ceramic wall tiles of size 200 x 300mm and thickness 6mm 1st quality set over base coat of cm (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete. 5 providing impervious coat to exposed rcc roof slab surface with c.m.(1:3) 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including charges all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junction of wall and slab etc, complete for finished item of work as per s.s. 6 supplying and fixing of unplasticised poly vinyl chloride (upvc) sliding windows three track -two glass shutters sliding and one mesh shutter duly manufactured using upvc reinforced profiles of (94 mm x 45 mm)/(80 mm x 52 mm) x 2.0 mm for outer frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.0 mm for sliding shutter frames capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm prefabricated & welded through fusion welding the window sash shall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be (42 mm x 25 mm)/(52 mm x 21.5 mm) x 2 mm fitted with nylon/ polymer mesh on rollers/ pulley duly fixed with tpv gaskets/ epdm weathering seal resistant accessories like locking system 1 no., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work. 7 supply,delivery and labour charges for fixing of 48" (1200mm) cei
Tender For work of removal of old rubber lining & providing of new rubber lining in various bearings of cv pumps for sps, surendranagar on as andwhen required basis.
Tender For skscm/ supply of rubber goods/2025-26 - particulars, rubber bush for transmission gear coupling big size as per drg. no. sksm /2/84, rubber bush for transmission gear coupling small size as per drg. no.sksm/284/2001, brass lined rubber bush 2 od x 2 length x7/8 bore, brass lined rubber bush for feed pump as per drg.no.sksm/175/97, rubber bush as following size:a- 1 od x1 length x5/8 bore, b- 1 od x2 length x5/8 bore, c- 2 od x2 length x3/4 bore, d- 1 odx 1 length x5/8 bore, e- 1 od x1 length x5/8 bore, f- 1 od x1 length x bore, g- 1 od x1 length x 5/8 bore, neuprine rubber strip for juice heater to resist the temperature up to 200 c as per following sizes:a- 15mmx15mmx12mm, b- 20mm x20mmx 15mm, c- 12mm x12mmx 10 mm, d- 20 mm x 15 mm x 12mm, e- 15 mm x 15 mm x 10 mm, neuprine rubber sheet suitable to recisttemp upto 200 c for double beat valve size 240 mm od x 25 mm id x 12mm thick, d0 but size 230mm od x 25 mm id x 12mm thick, d0 but size 250mm od x 138mm id x 12mm thick, rubber taper plug for 42 mm id tubes size 50 mm od top x 35 mm od bottom x 65 mm long x 5/8 bore, do- but for 98 mm id tubes size 110 mm od top x 75 mm od bottom x 105 mm long x 5/8 bore a34, rubberchannel for sight glass size 6 as per drg. no. 327/2, -do- but size 8 as per drg. no. 327/2, neuroprine rubber skuzzier for clarifier size thick x 6 width x 30 length, neuprine rubber o ring for mill hydraulic without ay scretches superior quality size 267 mm x 281 mm x7.00 mm thick, neuprine rubber o ring for mill hydraulic without ay scretches superior quality size 267 mm x 282 mm x7.5 mm thick, rubberchannel for telescopic valve of clarifier as per sample/ drg. no., sksm/56/87-r, neuprine rubber sheet as per size below:a- 25mm thickx1 mtr. width x2 mtr. long, b- 12 mm thick x 1 mtr. widith x 2mtr. long, rubber joint as per following sizesa- 3mm thick x 1 mtr width x 2 mtr. long , b- 6 mm thick x1 mtr. width x 2 mtr. long, neuprined rubber sheet for different valve forecast the temp..upto 200 ca- for semikestner exhaust valve drg. no.sksm/199/98/r-13, b- for vapourcell exhaust valve drg.no.sksm/199/98/r-13, c- vapour cell exhaust semikestner connedcting valve drg.no- sksm/199/98/r-13 sheet thickness 25mm, d- semikestner vapour valve as per drg. no.sksm/200/98, e- vapour cell vapour valve as per drg. no. sksm/200/98, f- quad 1 body vapour valve as perf drg. no.250/2000, g- quod 1 body exhaust valve as per drg. no. sksm/424/13, butyle rubber sheet for different valve as following:a- for 40 ton pan vapour valve as per drawing no.sksm/287/2001, b- for 40 ton pan discharge valve as per drg. no. ksm/177/97/r/2000/a, c- for continue vacc. pan exhaust valve as per drg. no. sksm/183/97, d- pan no. 1 exaust valve rubber sheet for (60 ton new pan) as per drg.no. sksm/285/2001, rubber mud seal for clarifier as per drawing no. sksm/453/17, different type / size rubber oil seal as per mykoda price list, rubber hose pipe ( dunlop make ) in different size for water / steam ( as per price list ), sugar grader rubber coupling (rubber hardness grade.90) od 115 mm id 50mm length 415mm as per drg. sksm/301/2001, neoprine rubber strip for new quad body man holes as per drg no. sksm/484/20, neoprine rubber seat for new v.l.j.h. condenser man hole as per drg no. sksm/486/20, neoprine rubber seat for quad condenser man hole as per drg no. sksm/485/20
Tender For brown toughened tined glass as per drg. no. lj54113 with having one side rounded corner of radius 95 mm and two holes size -10 mm with rubberchannel in sliding window of lhb coaches. note sam ple approve before bulk supply. [ warranty period: 30 months after the date of delivery ]