Latest rubber cup Tenders | Government rubber cup Tenders

State Government

CTN :43467490

16 Jan, 2026 NA

Delhi - Delhi

Tender For corrigendum : s/i/t/c of e/m equipments and allied works for newly re-bored tube well at okhla vihar near majar in okhla constituency ac-54. - supply of submersible pump set fitted with dynamically balanced ss impeller mounted on stainless steel shaft with protection sleeve having stage bowl & closed grained shorted type impeller, the pump will be directly coupled to required wet type induction motor of 7.5 hp, 15 stage, speed 2900 rpm suitable for operation of 3 phase, 415 volt, 50 hz, ac supply with efficiency 70% at following duty point: 200-125-75 lpm on 89-124-133 mtr. head.having discharge outlet 50 mm and outside dia 142 mm.make: bs/skope/ any djb approved. , supply of hut type electrical feeder pillar / fabricated with 50 x 50 x 6mm angle iron and 16 swg ms sheet with horizontal and vertical intermediate member of suitable size. i.e. 1370 mm x 760mm x 460 mm. with arrangement for mounting of switchgear and electrical energy meter i.c. painting heaving following item fitted. a) mccb 63 amp, 4pole, 415volt, 35 ka -1 no. b) rccb 63 amp, 4pole with earth fault indication protecting a circuit automatically in the event of earth leakage sensitivity 100ma, - 1 no c) fully automatic star delta starter of relay range 13-21 amp. (7.5 hp to 10 hp) 3 phase oil immersed type -1 no.d) ampere 96 x 96 mm. square shape 0-30 amp-1 no. e) voltmeter 96 x 96 mm. square shape 0-500 volt-1 no.e) indicating lamp (a set of 3 lamps) 1.setf) shunt capacitor of 10 kvar mpp type with three phase isolator with suitable banking g) motor protection assembly with earth leakage protection phase sequence corrector, single phasing, protection, overload protection, high voltage / low voltage protection time delay power on, programmable time switch i.c. r&b phase facility to change over from automatic, to manual &vice verse for up to 10 h.p -01 nos.complete wiring &installation of above accessories with required copper conductor wire and thimble etc. 01 job.make of all components: any djb approved., s/o pvc insulated and pvc sheathed cable with plain copper conductor having 3 phases, 3 core flat for submersible motor of 4 square mm size each 100 mtrs. make:grandlay / havells./any djb approved make, s/o m.s. clamp of 600 mm length duly fabricated out of 12.5 mm thick 75 mm wide, m.s. plate for holding the pipe of 50 mm dia., s/o double flange gi column pipe 50 mm dia medium class each of 3 mtrs long duly threaded on both ends, welded fitted with gi flange on both ends with slot of submersible cable. make: tata/ jindal./any djb approved make, s/o/ tail piece of the medium class gi pipe 500 mm long with one end threaded as per outlet of pump & another end flanged as per size of gi pipe 50 mm dia., s/o gi 90 bend of size 50 mm dia having both side flange (heavy duty)., supply of ms nut bolts off size as per requirement., s/o rubber packing for 50 mm dia flange., fabrication and supply supply of bore cover approx size 1x1 made out from 6mm thick m.s. sheet in 2 halves and a circular hole in centre 3-1/2 dia. with locking arrangement by nuts and bolt. , earthing with g.i. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required., providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as required., installation of t/well by lowering of sub p/set with all allied above items. this includes installation and grouting of panel boards with all electrical wiring & cabling at site. all tools & tackles i/c. tripod chain pulley blocks etc. shall be arranged by the firm. this includes testing & commissioning of t/well on load at site i/c. cartage, loading & unloading of material. it also includes a trial run of 30 hrs operation successfully by the firm. all required civil work included in the scope of work.

Central Government/Public Sector

CTN :43535323

27 Jan, 2026 NA

Ludhiana - Punjab

Tender For supply of rubber part kit for sa-9 ind brake valve consist of 05 item drg. no.skdp-3052 alt 1,skdp-3031,[s.no.4,7,16 ]

Central Government/Public Sector

CTN :43534847

09 Feb, 2026 NA

Mumbai - Maharashtra

Tender For supply of spherolastic rubber bearing (silent block) for aar-h type tight lock coupler head forlhb coaches conforming to rdso specification no. rdso/2011/cg-03 rev-03 , amendment slip no 1. of july 2024. make of silent blocks should be either tvs or gmt vide rdso letter no. mc/blb/cbc dt 31-08-2024. item shouldbe procured from rdso approved vendor sources for aar-h type tight lock coupler head for lhb coaches.as per rdso's letter no. mc/blb/cbc dated:28.04.2025, silent block should be interchangeable among various make. rdso item id: 3100211 [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :43535408

28 Jan, 2026 NA

Danapur - Bihar

Tender For supply of set of spare part of inlet system for bio vacuum consisting of (1) toilet seat cover (western), item code-vt 074-02 nos. (2) flush switch (dual)complete, item code-vt 220-05 nos. (3) lavatory bowl western type with & seat cover, item code-vt 135-01 set. (4) intermediate tank (western), item code-vt 136-01no. (5) multi nylon tee (4/5 port)-05 nos. (6) rubber fitting and hose connector, item code-vt 097-10 set. (7) water pump diaphragm, item code vt 112-10 nos., make-metal fab. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :43535409

28 Jan, 2026 NA

Danapur - Bihar

Tender For supply of set of spares of pneumatic system of bio-vacuum system of tejas coaches consisting of (1) vacuum ejector, item code-vt 026 -05 nos. (2) pinch valve (vmp10), item code-vt 028- 03 nos. (3) pinch valve (vmp32), item code-vt 029- 01 nos. (4) pinch valve (vmp40), item code-vt 030- 01 nos. (5) pneumatic elbow connector (1/4" x 8 mm), item code- vt 038- 10 nos. (6) 2 port valve, item code- vt 059- 10 nos. (7) rubber hose 25 mm (as per is 12585 type-ii), item code- ret 69- 10 mtr. (8) rubber hose 20 mm (as per12585 type-ii, item code- ret 069- 10 mtr. (9) silencer 3/8, item code- vt 064- 10 nos. (10) pneumatic on/off isolate valve 1/4", item code- vt 115- 05 nos. (11) pneumatic fitting & pu tube- 01 set. make- metal fab. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :43532713

16 Jan, 2026 NA

Samastipur - Bihar

Tender For supply of rubber part kit for f-2 feed valve, it consist of 24 items , wabco pt.no.-542008-84, item may be similar as sr. no. [1 ]

Central Government / Public Sector

CTN :43532344

19 Jan, 2026 NA

Tirupati - Andhra Pradesh

Tender For supply of rubber sealing 3 x dia 758 mm confirming to natural rubber as per icf drg. no. icf/std- 6-3-068, alt.-f/nil, item no.17. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :43534631

02 Feb, 2026 NA

Tirupati - Andhra Pradesh

Tender For supply of set of 07 items for wheel set earthing equipment for lhb coaches. (1.) isolating bush for wheelset earthing equipment (for lhb type coaches) conforming to specification ep-4030 and to rcf drawing no. lw71244, alt.- a/nil. qty.- 10 nos/set. (2.) bracket ( for wheel set earthing equipment in lhb coaches) conforming to is specification is: 2062-84 fe410.wc and to rcf drawing no. lw71247, alt.- nil. qty.- 02 nos/set. (3.) spring for cover for wheel set earthing housing (for lhb type coaches) conforming to is specification is:4454-2005 spring steel and to rcf drawing no. lw71250, alt.- a/nil. qty.- 01 nos/set. (4.) cover hinge tube for earthing brush assembly (for lhb type coaches) conforming to is specification is:319-69 tab-1, brass and to rcf drawing no. lw71253, alt.- nil. qty.- 01 nos/set. (5.) cover pin dia 5x52 for wheel set earthing equipment (for lhb type coaches) conforming to is specification is:2062-64 42wc and to rcf drawing no. lw71254, alt.- a/nil. qty.- 01 nos/set. (6.) o-ring dia 140x2 conforming to neoperene rubber (60% neoprene & 40% rubber) and to rcf drawing no. lw71232,item-05, alt.- f/nil. qty.- 02 nos/set. (7.) o-ring dia 30x2 conforming to neoperene rubber (60% neoprene & 40%rubber) and to rcf drawing no. lw71232,item-06, alt.- f/nil. qty.- 02 nos/set. note : item to be procured from uvam id : rcf item id: 2400031 approved sources only. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :43544090

16 Jan, 2026 NA

Hyderabad-T - Telangana

Tender For supply of rubber door stopper for body side door to icf drg no:icf/std-4-3-004, item:1,alt:small'c`/nil.

CTN :42842817

20 Jan, 2026 16.90 Lacs

Chhabra - Rajasthan

Tender For corrigendum : supply of spare/accessories items of two nos. multi-purpose fire tender(rj-28ea-0956 and rj-28- ea-0957)against tn-sc-638/2025-26(mm) - high pressure hose reel with 60mm lg x 19 mm ( ) with fog gun and spray type, low pressure hose reel with 19 mm x 50 mm long hose with duel purpose shut off nozzle., extension ladder 10.5 meter, delivery hose 63 mm rubber lined in 30 m length (type b of is 636/79/5) complete with instantaneous coupling., long line 50 mm circumference 30 m long as per is 1084., short line 50 mm circumference 15m length as per is 1084., protective clothing for fireman complete with golves, boots, helmets with suitable face shield mad out of material capable of reflecting at least 95% of radiant heat temperature around 1500 to 2000 degree celsius and also afford some protective against direct flame. the suit will be of sufficient size to accommodate a breathing apparatus to users (item should be packed in hard body box)., fire hook, fire man axe, sledge hammer, carpenter saw, pick axe, celling hook, crow bar made of carbon steel, self contained breathing apparatus (45 min duration compressed air type) complete with spare cylinder & tool kit), dividing breeching, collecting breeching, pvc suction hose heavy duty complete with copper alloy round threaded couplings to suit the pump inlet - 2.5m long., suction strainer for item 2, basket strainer suitable for item 4 , is : 3582, dividing breaching with control arrangement as per is : 5131, collecting breaching as is : 905, hose bandages rubberized is : 5612, hose clamps is : 5612, water curtain nozzle made of m .s .plate with g . m instantaneous connection, branch pipe short ( chromium plated) is : 903, a set nozzle of sizes 12 mm , 16 mm , 20mm , 25 mm and 32 mm ( two each ) ( see is : 903 - 1975 * t ), adapter for 100mm suction female thread and 63mm male instantaneous, adaptor double female instantaneous pattern 63mm ., adaptor double male instantaneous pattern 63mm, hand lamp ( 4cells ), rubber gloves 33kv 1 pair, fire beater, foam pick up tube, rubber gloves as per is 4770 - 1991 for 5000 volts, leather gloves is 6994 1977, jack hydraulic for 20 ton capacity with handle, hand controlled branch for 63 mm size hose coupling, hand held fast action select flow nozzle :-the selectable flow rate multipurpose nozzle should have a multiple flow setting. this product be of light in weight and easy to handle. weight of the nozzle should not be more than 2 kg. the calibrated flow rates are easily selectable through an selection ring. the stream patterns should be changed by rotating the diffuser head ring. nozzle should be having pistol grip, shut off ball valve opening and made of aluminum alloy., bolt cutter 600mm long, shovel with handle, minimum 12v halogen fog & spot lamps, hose ramp

Rubber Cup Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors