Get complete information related to latest Rubber Disc Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Rubber Disc Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Rubber Disc Tenders.
Tender For supplying and fixing of smart class and development of rooms at ghps school at kerehalli village in koppal taluka - unbranded alloy world cantilever office chair non revolving and non tilting chair with armrest, smart class finger tip interactive panel solution for instution with warranty 3 years interactive flat panel 65 inch, supplying of ceiling fan with capacitor rating as per guideline of bee 5 star rating and is 374/19 and also comply with is 1709/1984 with latest amendment, rated voltage 220 v/50 hz, rated power upto 35 w +/- 10 %, rated current as per is 374/19, rated power factor 0.9 lagging(min), rated speed 350 +/- 10% rpm, rated air delivery 210 +/- 10% cubic meter minimum, rated service value 6.2 cmm / w, three blades of blade leaf 1.05 mm thick aluminium alloy sheet,, dell 1024 gb storage laptop notebook base processor number for higher processor higher processor number intel core 7 150 u operating system factory pre loaded window 11 home ram size gb 16 display size in cm diagonal 35.56 to 37.07 14 into 14.99 in capacity of storage drive in gb 1024, providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to is 1868 with minimum anodic coating of grade ac 15, providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (cost of aluminium snap beading shall be paid in basic item)with float glass panes of 8 mm thickness (weight not less than 20 kg/ m2) including cost of materials, labour, usage charges of machinery complete as per specifications., painting on g.s. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade new work (two coats) including a coat of approved steel primer but excluding a coat of mordant solution including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of engineer-in-charge., finishing walls with textured exterior paint of required shade new work (two coats applied at 3.28 l/10 m2) over and including priming coat of exterior primer applied at 2.20kg/10 m2 to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of engineer-in-charge
Tender For corrigendum : supply of veterinary instruments and equipments - allis tissue forceps (20 cm.), artery forceps curved (15 cm ), artery forceps straight (15 cm ), forceps s.s. (20 cm), forceps s.s.(15 cm), haemostat straight s.s.(17.5 cm), haemostate curved s.s. (15 cm. ), mayo s scissors curved isi (s.s. 15cm), mayo s scissors straight isi (s.s. 15cm), scissors straight s.s.(12.5 cm), scissors straight s.s.( 17.5 cm), surgical gloves (standard), surgical mask (standard), suturing needle (assorted size) (traumatic/atraumatic cured/st.), suture thread silk/ nylon (10 mt. reel no.100, 0, 1, 2, 3), chromic cat gut (100, 0, 1, 2, 3 no.), needle holder s.s.(15cm), instrument trolly, dressing drum s.s. round 20 gauge (height 30cmx30cm dia.), b.p. blades (no. 22, 23, 24, 11, 12, 13,14, 16, b.p. handle s.s.(no. 3 ), b.p. handle s.s.(no. 4), kidney tray s.s.(15 cm length), tray small ss (250mmx300mm), hypodermic needle (15 x3/4"), hypodermic needle (18 x3/4"), vaccutainer with needle (with vacuum, 10 ml and needle of double bewell 16 no.), electrcally operated needle and syringe destroyer. destruction rate max. 1 minute per needle of 1.6 mm thickness with 80 mm length. min. 350 cutted hubs of syringes with needle burnt residue., bloodless castrator for small animals 9 (made of special high carbon steel coated for protection against rust formation), castrator imported, i/v fluid stand (s.s.), intra venous set (disposable 0 standard) ), scalp vein set (21 no. 0 22 no.), electric dehorner (30 cm length), trocar canula for sheep s.s.(15 cm), teat syphon (ss), drenching bottle (large) (metal 500 m), drenching bottle (small) (metal 200 ml), doctor coat tericot (free size), plastic apron, macentosh sheet (double colour), rubber arm sleeves with latex gloves (no. 9), gum boot, dog muzzle (assorted size), dog nail cutter (standard), measuring cylinders (50 ml graduated borosil glass ), measuring cylinders of (100 ml graduated borsil glass ), medicine carry bag (nylon 600 dpu coated padded, multipocket for medicine and surgical equipments ), jar with lid ss (2 kg. capacity), jug ss (2 ltr. cap.), thermos s.s. double insulated (1 ltr. cap., 30cm length, 7.5cm mouth dia with soulder carrying strap.), bucket ss (12 ltr capacity), california mastitis kit, centrifuge machine (bench top) for general purpose, canopy tent with carrying bag. frame made of steel powder coated pipe (23 gauge) 0 tetron cover (waterproof) with two folding chairs and one folding table, vaccine carrier (1.6 lit capacity with 4 ice packs), microscope binocular, autoclave electric, calf puller ss 316/304., animal catching device, cold boxes vaccine storage capacity 20 ltr. weight fully loaded 43.3 kg. empty weight 17.5 kg. external surface material plastic, internal lining material plastic , insulation material polyurathene, insulation thickness 110 mm,, refrigerator, thermocautery, veterinary urine analyzer with accessories, animal sling for large animals, cold cabinet/ cold room with 25% capacity of racks as deep freezer and 75 % as cold cabinet having 2-8 degree celcius temperature, digital display, alarm system for temp. beyond set point, hematology analyzer with accessories (three parts), semi automatic veterinary serum analyzer with accessories, verticle cold cabinets for vaccine storage, with storage temperature 2-8 degree celcius. temperature holding time atleast 12 hrs, at power failure. adjustable shelves., hot air oven, incubator, ice liner (ice lined refrigerator or freezer) compressor compartment0 hermetically sealed high quality compressor 230 v 50/60 hz. relatively noise less fan to cool down the compressor. all steel tubes protected with special compound against rust formation. 1 thermostate pre-stetted from the factory for 2 c - 8 . control panel situated at the front of the unit. light indicators for different functions, 1 digital thermometer to indicate the internal temperature, latest cooling system. insulation with thick polyurethane foam. foaming agent- cyclo
Tender For tender for supply of elbow half inch , elbow three by four inch , elbow on inch , elbow one and one by four inch , elbow one and half inch , elbow 2 inch , gi tee half inchx half inchxhalf inch , gi tee three by four inchxthree by four inch x half inch , gi tee three by four inchxthree by four inchxthree by four inch , gi tee one and one by four inchx one and one by four inchxone and one by four inch , gi tee one and half inchxone and half inchxone and half inch , gi fitting two inchxtwo inchxtwo inch , gi nipple half inchxtwo inch , gi nipple half inchxthree inch , gi nipple half inchxfour inch , gi nipple three by four inchxtwo inch , gi nipple three by four inchxthree inch , gi nipple one inchxtwo inch , gi nipple one inchxthree inch , gi nipple one inchxfour inch , gi nipple one and half inchxtwo inch , gi nipple one and half inchxthree inch , gi nipple one and one by four inch x three inch , gi nipple one and one by four inchx four inch , gi nipple two inchxthree inch , gi nipple two inchxfour inch , gi socket half inch , gi socket three by four inch , gi socket one inch , gi socket two inch , gi socket three inch , gi socket four inch , gi pipe half inch , gi pipe three by four inch , gi pipe one inch , gi pipe one and one by four inch , gi pipe one and half inch , gi pipe two inch , gi pipe three inch , gi pipe four inch , g.m gate valve two inch , g.m gate valve one and half inch , g.m gate valve half inch , g.m gate valve three by four inch , g.m gate valve one inch , gi reducer socket three by four inchxhalf inch , gi reducer socket one inchxthree by four inch , gi reducer socket one inchxhalf inch , gi reducer socket one and half inchxhalf inch , gi reducer socket one and half inchxone inch , gi reducer socket one and half inch x one and one by four inch , gi reducer socket two inch xone and one by four inch , gi reducer socket two inchxone and half inch , atw valve , ball valve 1 inch , ball valve half inch , ball valve three by four inch , ci gate valve 6inch , ci gate valve 4inch , ci non return valve 6inch , ci non return valve 4inch , atco valve , gland packing 8mm , gland packing 12mm , rubber gasket one by eight , angle 25mmx25mm , angle 40mmx40mm , angle 50mmx50mm , angle 65mmx65mm , angle 75mmx75mm , channel 75mmx75mm , channel 100mmx100mm , fevicol (sr) , knob , window fastner (lqr) , mirror 150 no , m.s. hings 5 inch 100 no , m.s. hings 3inch 100 no , m.s. hings 2inch 100 no , panel door (2.1x0.75mm) , panel door (21.x0.90)mm , flash door (21.x0.85) , cubboard (2x0.5) , steel screw 20-5 , steel screw 12-5 , steel screw 25-6 , steel screw 30-7 , window glass (1200 by 600) 4.5mm , dendrite , half inch c.p. pill cock , pvc bib cock half inch , half inch brass bib cock (isi mark 400gm wt.) , 25mm brass float valve , half inch bib cock washer , half inch c.p. bib cock , half inch g.i. socket , half inchxtwo inch g.i. nipple , half inchxthree inch g.i. nipple , half inchxfour inch g.i. nipple , pvc cistern law level 10lit. cap. full fitting , 32mm c.p. waste coupling (for wash basin) , c.p. gatting 5inch , pvc connector pipe half inchx18inch , c.p. shower 50mm , m-seal , pvc pipe flexible half inch , pvc pipe flexible three by four inch , pvc pipe flexible one inch , w.c. pan , european pan , wash basin 10inch , pre waste pipe 32mm , pre waste pipe 40mm , european seat cover (white) , hand spray , hand shower , brilliant white paint , golden yelow paint , black paint , p.o. red paint , oxford blue paint , bus green paint , fevicol (ddl) , blue powder , ad grey paint , pale cream paint , tarpin oil , patsan , wall putty , french chalk powder , obd white , weather coat white , weather coat cream , weather coat green , weather coat yellow , weather coat blue , weather coat black , snowcem cream , snowcem brick red , weather coat tere kota , red oxide metal primer , welding rod 3.15mm , welding rod 4mm , welding rod 2.15 mm , gas nozzle , aggregate angular 20mm , aggregate angular 12mm , aggregate angular 40mm , tm
Tender For corrigendum : repair, recanning and restoration of all wooden and steel chairs at md accn and units of bmu, dhq-5 and icgas chennai area under ge (i) (cg) chennai - chair verandah:-, fd-256 ,259,fd/map-ii/06, spot gas welding to broken parts/joints of chairs., removing of existing torn out/unserviceable plastic cane from chair verandah and recanning the chair fully both seat and back with new plastic cane of virgin quality white, half round of size 4mm wide and 0.60 mm thick.complete all as specified and shown on drawing.the canning shall only be done after painting the chair. , removing the old broken shoes of chairs and supply and fixing best quality new pvc shoes to the legs of chair., removing the existing unserviceable/broken pvc seat and back from the chair,supply and fixing new pvc seat and back 4mm thick to the chair verandah map after providing one flat iron of size 20mmx5mm in support of pvc seat at centre between two sides through proper welding .the pvc seat shall got approved from ge before supply.the pvc seat shall be fied only after painting the chair., painting the frame of the chairs by two coats of synthetic enamel white of approved quality paint after prepartion of steel surface by sanding with sand emery paper and dusting the surface with clean cloth.the chair frame shall be made smooth by applying metal putty whereever required., chair cb steel with arms:fd-75(m), scratching the entire frame of chair and applying one coat of synthetic enamel paint after preparation of surfaces by removing the old paint with sand emery paper. complete all as specified and as directed by engr-in-charge, remvoing the old unserviceable and broken ms flat and supply and fixing ms flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat., removing the old unserviceable seat from the frame of the chair. supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable back from the frame of the chair. supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable arm and supply and fixing new arm of 1st class teak wood as per drg., removing the old unserviceable hard rubber shoes and supply and fixing new hard rubber shoes as per drg., removing the old unserviceable rubber caps and supply and fixing new rubber caps as per drg., chair cb steel without arms: fd-75(m), scratching the entire frame of chair and applying one coat of synthetic enamel paint after preparation of surfaces. complete all as specified and as directed by engr-in-charge, removing the old unserviceable and broken ms flat and supply and fixing ms flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat., removing the old unserviceable seat from the frame of the chair. supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable back from the frame of the chair. supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable hard rubber shoes and supply and fixing new hard rubber shoes as per drg., removing the old unserviceable rubber caps and supply and fixing new rubber caps as per drg., chair easy,fd-229,358 :-, removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood as per drg., removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood as per drg., removing the old unserviceable rail and
Tender For high pressure rubber hose pipe for working pressure of 20 kg/cm? and having embedded ste el wire confirming to ls 226 gi coated and rubber hose confirming to sae-100r1 having od 17.5 mm, id 10 mm and length l000mm with 3/8 swivel nut at both ends. the metallic nut should confirm to ls 226 gi coat ed. note: l) this item is reserved for supply by source in irepsvendor directory only as per clw ltem id: 21 00901 2) one sample to be got approved before effecting bulk supply [ warranty period: 30 months after the date of delivery ]