Latest rubber foam Tenders | Government rubber foam Tenders

State Government

CTN :40514371

03 Jun, 2025 NA

Delhi - Delhi

Tender For supply of mechanical items for various tubewells installed at loknayak puram, bakkarwala. - supply of gi pipe 50 mm dia, medium class with gi flange welded on both sides, each pipe 3mtr. long with threading work on each side of pipe, each flange should have 4 holes and cut for submersible cable. make: jindal / tata or any other make approved by djb., supply of gi tail piece medium class 0.5 mtr. long inclduing one end flanged and the other end threaded of 50 mm dia., supply of ms clamp 8 mm thick suitable for 8 inch bore dia, complete with nut and bolts and washers for holding the 50 mm dia pipe including bending and shaping etc. as required., supply of gi bend 50mm dia 90 deg. double flange. heavy class, make: ganesh / jindal/ tata / isi, supply of 6 mm thick steel wire rope to hold the pump., supply of required off size threaded nut bolts and washers of good quality., supply of ms bore cover 4 mm thick suitable for 8 inch bore size in 2 pieces complete with bolting arrangement angle iron frame and provision of 50 mm dia hole in the center., supply of neoprene rubber packing 3 mm thick, suitable for 50 mm bore pipe and having 4 holes for nut / bolts.

Central Government/Public Sector

CTN :40529334

12 Jun, 2025 NA

Dehradune - Uttarakhand

Tender For supply of "class 4 natural rubber hand gloves without joint for electrical work usage as is13774:201 4 / iec 60903:2002 (or latest), test voltage 40000 volts, working voltage:36000 volts, size 360-380 mm le ngth(desirable: as per attached specification)make/brand-jupiter /jyot /vidyut /aktion safety or similar" "as per attached specification" [ warranty period: 30 months after the date of delivery ]

CTN :40520986

19 Jun, 2025 NA

Meerut - Uttar Pradesh

Tender For supply of paint spray gun make pilot , sand paper with six holes velcro number forty , thread locker locktite two four two , cutting disc dia one hundred mm , broom sweeping , rubber backing pad one hundred fifty mm for sander machine , spanner socket thirty two mm three by four inch taparia , spanner socket thirty two mm one by two inch taparia , inspection torch , water tank plastic five hundred ltr , portable led work light thirty watt , battery charger elak twelve to seventy two volt twenty amp , balancing weight five hundred gms , balancing weight four hundred gms , balancing weight three hundred gms , balancing weight two hundred gms , balancing weight one hundred gms , truck under body washing trolley with spray jets , acetylene gas regulator isi mark with one safety valve and two gauges , oxygen gas regulator isi mark with one safety valve and two gauges , steel wire brush

CTN :40508498

17 Jun, 2025 NA

Pithoragarh - Uttarakhand

Tender For supply of complete structure and construction material of cp - cement in polythene bags 50 kgs each 43 opc , sand coarse , crushed stone aggregate 20mm graded , crushed stone aggregate 40mm graded , rr stone boulders , tmt steel bar 8 mm dia , tmt steel bar 10 mm di , tmt steel bar 12 mm dia , tmt steel bar 16 mm dia , app based polymeric membrane minimum weighing 3kg oblique sqm and minimum 3mm thick reinforced with polyster non wove fabric , 75mm dia pvc pipe for weep hole , scantling 3 x 3 inch seasoned first class hard wood 2 point 30 mtr long , shuttering plywood of size 8 x 4 feet and 12mm thickness , binding wire 20 gauge zero point 9mm annealed , nails 2 inch for shuttering , nails 3 inch for shuttering , nails 4 inch for shuttering , water proofing compound , quick setting compound , ms door pre fabricated , loophole of size 600 mm x 500 mm , bitumen vg 10 , 10mm thick ms plate as in one layer on roof , 20mm thick ms plate as in two layers on roof , shredded rubber 150 mm , lime , primer for synthetic paint , synthetic enamel paint light brown shade , synthetic enamel paint medium brown shade , synthetic enamel paint dark brown shade , paint brush , lighting conductor complete set , cut off machine 14 inch , tile cutter make bosch for ply cutting , working goggle 1 as per sample , ppgi sheet zero point 60 mm thick of size 10 x 03 feet , durmut 5 kg with 5 feet wooden handle , concrete vibration machine petrol needle , hand gloves rubber best quality , pan motor tasala 18 dia made of steel , phawrah with handle midium size , shovel with handle , measuring tape 5 mtr rectractable grade a1 16 , measuring tape 10 mtr rectractable grade a1 16 , wiremess for seiving sand 1 mtr width 15 mtr roll , axes picks 3 kg head with handle , crow bar hexagonal 1200mm long x 40mm dia , gum boot various size , spirit level 10 inch long , nylon mason thread 100m long , mild steel single hand double wheel barrow to carry upto wheel barrow 200 kg weight , rock drill machine bit 48mm thick , rock drill machine bit 32mm thick , plumbob steel with lasing , water level pipe for mason work transparents , hammer 10 kg with handle , tmt bar bending frame , tmt bar bending handle , wooden gurmala of size 8 x 4 inch , aluminium study of size 3 x 2 inch and 6 feet long , steel gurmala of size 8 x 4 inch , hdpe tirpal of size 30 x 30 feet , steel bucket 15 ltr , iron cutter blade 14 feet , iron cutter blade 4 feet , hexa blade double side , portable hydraulic concrete mixer machine conforming to is 12119 to 1987 to provide an uniform mix for a reliable operation

CTN :40504890

10 Jun, 2025 2.22 Crore

Jaipur - Rajasthan

Tender For replacement work of existing porcelain disc insulator strings by silicon rubber housed composite insulator (120 kn suspension type) for 400 kv s/c ratangarh stps at suspension towers between loc- 1 to 420 (ckt 1st ) and loc-1 to 430 (ckt 2nd)

CTN :40090919

31 May, 2025 NA

Bidar - Karnataka

Tender For bid to ras supply of publicity items - executive notebook with skat watermark on each page , official sqn print with grame a4 size with wooden frame and matte lamination , photo frames large size 2x3 ft with wooden frame and matte lamination , skat brouchers , skat postcard , skat pamphlets , skat drawing book , sqn memento with wooden frame with metal work , coffee mugs with skat logo , 3d aircraft shape fridge magnets , card board aircraft puzzle coloured , skat car stickers , click type ball pen with skat logo , metal key chain with embossed team logo , skat kids styrofoam rubber frisbee , wooden leather material pen stand with embossed skat logo , executive fountain pen with embossed skat logo , lapel pin 3d with embossed skat logo , skat jute bag medium with skat printed logo and inside plastic coating , skat paper bags medium with skat printed logo and with golden finish , stationery pouch with small stationery items like pencil, eraser, sharpener with custom skakt design on each item , small crayon set with customised cover , skat customised tie set with box , skat customised bookmarks bid number/ & ( * ) : gem/2025/b/6141993 dated/ + : 22-04-2025 bid document/ 2 2 1 / 23

CTN :40466705

06 Jun, 2025 9.00 Lacs

Barwaha - Madhya Pradesh

Tender For furniture suppl- "table 5x3 in novapan, 3 drawers, 1 locker18mm bulk top, 9mm work frame, 12mm panel" "2 iron office cupboard 6ft in20-20 gauge stainless steel 90kg" , "tea table wooden3x2.5, 18mm buried glass, 12mm pu polished cream babul, 4 pvc feet in peg" "iron rank 6ft in, 6 compartments1x1x4 wide, 1ft deep, 6ft long" "iron rank 5ft in, 5 compartments1x1x4 wide, 1ft deep, 6ft long" , "center table glass high quality12mm ms frame, 18mm toughened glass, pvc parcel" , "multi seater bench three seater steel68d x 180w x 78 inch" , "tea table glass12 mm ms frame, 18 ms toughened pvc percale" "iron table 4x2, 2 drawers, 1 locker12 mm frame ms, 18 m gauge cabane, 18 mm bulk top" , "plastic chair heavymango wood colour frame vanegan plastic" , "revolving chair full back bigas per sample" , "iron office cupboard 4 feet small20-20 gauge stainless steel 90 kg" , "revolving chair half back for computer operatoras per sample" "sofa set steel three seater165 id x 50.8 bl x 81.3 h frame 55 kg l size" , "plastic stoolmango wood colour frame vanegan plastic" , "wooden computer table 5x3 drawers, locker25 mm bulk laminated polymac board ply, 18 mm cabin ply frame, 4 m ribbon strip" , "visiting chairstand steel 52.9 cm, 1 mm bulk top, pvc cover on 12 mm plywood back" , "center table25 mm bulk ply, 15 mm board, 9 mm frame with melamide polish" , "bouquet cupboard for keeping books, books20-20 gauge steel 12-18 mm glass work" , "steel chairas per sample" , "wooden table230 gsm plastic sheet, 18 mm wood frame with pv coating rubber wood" , "wooden cupboard 6 ft20-20 gauge stainless steel 90 kg" , "wooden table 5x3 in iron angleisi mark" , "corner sofa (leather) t t - table complete with glasscomplete 32 density front foam, 28 density back home, 18 mm thok ply, 06 mm panel, 12 mm frame babul polish, 04 mm pvc pads" , "corner sofa (cotton fabric heavy) t - table complete with glasscomplete 32 density front foam, 28 density back home, 18 mm thok ply, 06 mm panel, 12 mm frame babul polish, 04 mm pvc pads" , "corner stool glassisi mark" , "bed 6x6.5 (wooden)isi mark" , "bed mattress 6x6.5isi mark" , "sofa set 5 seater (leather)isi mark" , "sofa set 3 seater (leather)isi mark" , "sofa set single seater (leather)isi mark " , "sofa set 5 seater (cotton fabric heavy)isi mark " , "sofa set 3 seater (cotton fabric heavy)isi mark " , "sofa set single seater (cotton fabric heavy)isi mark " , "elciner sofa electricisi mark "

State Government

CTN :40501962

04 Jun, 2025 1.14 Lacs

Srinagar - Jammu And Kashmir

Tender For providing of various items to drivers room and allied works at direction office, circle office and divisional office of m and hed kashmir - providing and fitting of water purifier with purifier purification stages:ro+uv+min+copper purification cartriges : 1. super sediment filter 2. carbon block filter 3. anti-scalant cartridge 4. ro membrane 5. mineral cartridge 6. copper cartridge 7. in tank uv sterilization storage tank capacity: 7 l ro membrane : 75 gpd (gallons per day) production rate : upto 15l/hr max duty cycle : upto 75 litres/day ultra violet led : 0.7 watt input voltage : 140-300 v ac / 50 hz operating voltage : 24 v dc works on tds upto : 2000 ppm, providing and fitting of graphic matting of size 14.5x 12.5, providing and fitting of floor blankets of size 14.5x 12.5, providing and fitting of shoe rack of standard size, providing and fitting of exhaust fan/ventilation fan 150mm sweep 1400 rpm , 270 cmh air delivery, 28 watt, providing, fitting of 20-watt surface led light, providing of cup set of six pieces, providing of ss rice plates, providing of ss water glass, providing of uniform for drivers, dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge: 15.10.2 in cement mortar, providing and fixing brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : cement mortar 1:6 ( 1 cement : 6 coarse sand). (jksor code-6.1.5), providing and fixing of pink marble slab plain 18 mm thick(6007a), providing and fixing 15 mm nominal bore of standard back type c.p. brass sink mixer of approved quality and make, weighing not less than 1.970 kg., providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c waste fittings complete: 18.28.1.2 40 mm dia, providing and fixing of stainless steel kitchen sink - without drain board 610x460 mm bowl depth 200 mm, providing and laying of cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 11.3.2 40mm thick with 20 mm nominal size stone aggregate., direction office/circle office / ao office, vitrified floor tiles providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 11.52.1 size of tile 500x500 mm, providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws.(jk sor 9.10.5) second class kail wood 35mm window size i)49"x18"- 04 no., painting wood work with deluxe multi surface paint of required shade. two or more coats applied @ 0.90litre/10sqm over anunder coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture for windows (jksor 13.57.2), renewing glass panes, with wooden fillets wherever necessary :14.7.1 float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) 43"x13"- 02 no., providing and fitting of anodised aluminium tower bolt (barrel type) 100 x10 mm(jk sor 0702), providing and fitting of anodised aluminium handles 100 mm with plate 150x32 mm (jk sor 0704), providing and fixing bright finished steel hooks and eyes for windows, renewing double glazing glass panes argon filled for upvc windows , 20mm overall thickness along with rubber seal, servicing of upvc windows/doors which include servicing/repairs of friction stays, handles etc

corporations/Associations/Others

CTN :40503762

18 Jun, 2025 NA

Hubli - Karnataka

Tender For auction sale of work shop sweeping,scrapped used grease with barrel removed from hub,scrapped empty barrels consisting of 3 types,scrapped tread rubber powder consisting of 2 types,rubber scrap,scrap countable items consisting 21 types. tc/ll/eicher.,scrapped building demolished materials consisting of 3 types.,scrapped building stones and old ac sheets consisting of 2 types.,scrapped building demolished materials consisting of 6 types.,scrapped building demolished materials consisting of 4 types.,scrapped tree piece,scrapped waste & sludge engine oil with barrel 210 ltr,scrapped spring steel including below 1 feet bits with or without c clamps.,scrapped radial tyres size 1000x20 lot-i,scrapped bvc paint drums consisting of 2 types.

corporations/Associations/Others

CTN :40488073

16 Jun, 2025 14.21 Lacs

Kutch - Gujarat

Tender For maintenance, fabrication, replacement of rubber seal & roller, paint work of radial/vertical c.r./h.r. gate in gate leaf, end arm assembly, ladder & hoist platefome including with all accessories, including cost of all materials, machinery, labour, etc., complete as per specifications with all leads and lifts. at kbc ch.no. 231.022 to 250.423 km.

Rubber Foam Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

corporations/Associations/Others

corporations/Associations/Others