Latest rubber paint Tenders | Government rubber paint Tenders

Central Government/Public Sector

CTN :45712962

08 Jul, 2026 1.40 Lacs

Nicobar Island - Andaman And Nicobar Islands

Tender For supply of jerry can 20 ltrs , hand sanitizer , air freshener or air pocket 10 in no pkt , tube florescent or led or cfl , lamp cfl or led 20 watt , corrosion inhibitor 750 ml , can plastic 10 ltr capacity , varnish , polythene film length 112 width 18 thk 0.007 , bag gunny 27 x 21 , paint finishing for inter deck white , paint rfu priming red lead , paint coal tar epoxy black , paint remover non-inflammable , rope polypropylene 16 mm isi mark , emery cloth abrasive 11 x 9 is grit 36 , cloth terry flex cotton 36 width , cloth flanet 4 by 2 , cloth coated pvc 102cm wide , roller paint 6 inch , gloves leather v , emery cloth abrasive cloth is grit 36 , detergent solution , bleaching powder stabilised , dry chemical powder 05 kg pack , battery charger with connecting lead ma4234 for sse , grease lg 200 , aluminium telescopic baton size 3 mtr , clip jubilee 3.5 , jubilee clip 1 and half inch , twine sewing plastic , super mop , sand paper , safety glasses or goggles , o ring cord 7mm , ear plugs , anti corrosive compound 750 ml pack , instant glue 1 ltr pack * /bid number : gem/2026/b/7717654 + /dated: 27-06-2026 ' ' / bid document 1 / 28

Central Government / Public Sector

CTN :45726657

20 Jul, 2026 NA

Secunderabad - Telangana

Tender For supply of paint anti corrosive bituminous black to is:9862/81,with amendment no.1 of 1988 and reaffirrmmed 1999 packed in new steel drums plain (non returnable) 20 ltrs capacity to is:2552/79 grade b2. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45469215

30 Jun, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of 25b80c012 paint flourscent white (n8010-000137) , 25b80c012 paint rfu priming chlorinaated rubber anti corrosive l/a grey (n8010-000460) , 25b80c012 paint rfu bituminous black acid alkali+ heat resisting (n8010- 000255)

CTN :45704238

17 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For intergard269 (international) -n8010-p063004 , international thinner gta220-n8010-001549 , anti corrosive paint, fresh water tank-n8010-007652 , anti corrosive paint, avgas/avcat-n8010-007653 , h. p. anticorrosive paint for use under non-skid coat- n8010-007694 , h. p. advanced non-skid coating for helo & flight deck-n8010-007693 , inter shield ena 301 alluminium-n8010-p061831 , inter shield ena 300 bronze ani corrosive paint-n8010-p061832 , international thinner gta007-n8010-001174 , tie coat for application of tin free spc a/f paints- n8010-p009601 , brown/light red tin free spc a/f paint for u/w application-n8010-p009602 , red brown/darkred tin free spc a/f paint for u/w application-n8010-p009603 , black colour tin free spc a/f paint for boottop application , interthane 990 white base paint-n8010-p063088 , epoxy based anti corr paint for application in ballast tank- n8010-p009679 , intershiled 300 for weather deck & helo deck-n8010-p064025

CTN :45727838

25 Jul, 2026 NA

Kharagpur - West Bengal

Tender For supply of set of items for anti corrosive epoxy paint, colour: basalt grey to ral 7012. (i) pack %u2018a%u2019 and %u2018b%u2019 to be supplied in total 25 litres packing. (ii) colourless low odour mineral spirit to dilute epoxy coating material, qty: 2.5 litres per 25 litres of epoxy paint [i.e. 10 per cent of epoxy paint quantity] to be supplied in suitable packing [20 litres maximum]. matl.& specn : -- rdso specification no. rdso/m&c/pcn/123/2018 with rdso's amendment no. 1b (rev. 2.0) as an additional requirement. [ warranty period: 10 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

CTN :45712849

20 Jul, 2026 NA

Khammam-T - Telangana

Tender For supply of anti-corrosive paint colour sea green as per is-13607 and annexure - c , anti-corrosive paint colour po red as per is- 13607 and annexure - c , anti-corrosive paint colour yellow as per is-13607 and annexure - c , anti-corrosive paint colour black as per is-13607 and annexure - c , anti- corrosive paint colour white as per is-13607 and annexure - c , thinner as per is- 14314 and annexure-c , rust converter as per is- 13515 and annexure-c

State Government

CTN :45694291

14 Jul, 2026 NA

Rewa - Madhya Pradesh

Tender For supply of material in ropanis nursery management material and other works in social forestry rewa - laying and jointing pvc pipe. heading, nursery management material and other, dhaga pipe isi mark 1 inch bundle of 100 mtr, dhaga pipe isi mark 1/2 inch bundle of 100 mtr, dhaga pipe isi mark 1 3/4 inch bundle of 100 mtr, profile iron sheet (0.5mm), vermi compost limination bag size 19 x32 (inch) per bag gsm approx weght capacity 25 kg with office name printing, njcktk ,y;wehfu;e lykkbmj e; evsfj;y oxz eh0 deiyhv fqfvax ykdj lfgr xst 16]18]20, bejlu mpp xq.korrk dk ogkbv ,oa dyj ckgj, (anchor) 4.00mm 3 phase heavy duty iso/isi mark branded company, (bajaj) 4.00mm 3 phase heavy duty iso/isi mark branded company, (anchor) 2.00mm 3 phase heavy duty iso/isi mark branded company, (bajaj) 2.00mm 3 phase heavy duty iso/isi mark branded company, starter motor 3 phase isi mark, starter motor 2 phase isi mark, starter motor 1 phase isi mark, 5 hp drive solar control panel simha universal drive isi mark, 0.5 , 0.75 0 0(anchor), lqk qaxhlkbzm okfolvhu 12 izfrkr esudkstsi 50 ls 70 izfrkr , 1/2 . . . isi mark, lsdlu ikbzi 2 bap isi mark, lsdlu ikbzi 3 bap isi mark, 1 . . . isi mark, dkssdks fiv czhd, 2 . . . isi mark, uhe [kyh, lsdlu ikbzi 2- 1@2 bap isi mark, 3 . . . isi mark, 3 . . . isi mark, 3 . . . isi mark, 4 . . . isi mark, 4 . . . isi mark, 4 . . . (isi mark, . . 1 isi mark, . . 1 isi mark, . . 1 isi mark, biranchi 1 inch to 4 inch, dap 18:46 grainy (danedar), urea 18:46 grainy (danedar), lksyj lv hv ykbzv solar module 200wp batery (lithium ferro phosphate) 1100 wh (+20% permissible) led luminaire 36w (+20% permissible) pole (gi pole coated with rubber paint) height -5m above ground level, dia -4 included fitting, lksyj ysei, lksyj vkpz battery : 3.2v 250mah life po4 battery, light source : 0.5w bright led (42 lumen), it has 2 modes flashlight mode & reading mode, hdpe sprinkler pipe 2.5 inch (e;lsv , hdpe sprinkler pipe 2 inch (e;lsv , iumqcch eksvj iei 5 ,p0ih 3 phase isi mark branded company, iumqcch eksvj iei 7 ,p0ih 2 phase isi mark branded company, iumqcch eksvj iei 5 ,p0ih 1phase isi mark branded company, xsv oky 2.5 inch isi mark branded company, xsv oky 3 inch isi mark branded company

State Government

CTN :45678034

14 Jul, 2026 28.50 Lacs

Jummu - Jammu And Kashmir

Tender For providing, installation, testing and commissioning of electro-mechanical equipments at newly drilled t/well peerkho. - providing of 3 nos. submersible pump sets :- the job involves providing of 3 nos. submersible pump sets of specification 15000 gph x 80 m head of reputed make (one no. operational and two nos. standby) along with allied accessories to be installed in 10/12 inch dia. deep drilled new tube well peer kho. the job includes fabrication, providing and fitting of 2 no. clamps of span as per the required length to be fabricated and fitted with submersible pump sets with the help of heavy duty bolts and nuts (01 no. clamp to each pump set). the job also includes fabrication of 2 no. graded expander/ reducer for nrv of required size to be fabricated out of suitable thickness ms pipe threaded at one end and flanged at the other end. fitting of reducers/ expanders with 125 mm dia. column pipes at one end with flanged joint and with the discharge outlet of the submersible pumps at the other end.column pipes :- fabrication and providing of 125 mm dia. b class ms 20 nos. column pipes flanged on both ends. the length of each pipe shall be 3 mtrs. and shall be completely leak proof. the ms pipe shall be confirming to relevant isi specifications. the heavy duty flanges shall be furnished properly. one end of the flange shall be faced in such a way that a leak proof joint is made by providing and fitting a rubber sheet in between the two flanges and tightening it with nuts and bolts. each flange shall be provided with 6 no. equidistant holes of required dia. the job also includes welding of flat iron strips at each end for giving extra strength to the flanged joint and providing of 2 no. grooves on each flange on opposite sides for submersible cable to be accommodated though it. the welding of heavy duty flanges with the pipe should be carried out with superior quality pipe welding electrodes. then painting all the pipes with a coat of anti corrosive paint and two coats of super enamel paint. ms well cap, washout and riser pipe :- fabrication and fitting of ms well cap as per casing dia. of 8 mm thickness with one hole of approx 125 mm dia. in the centre and with holes/ cuts at an appropriate distance for passing submersible cable. providing and fitting of an arrangement for gi fitting near the discharge head outlet to provide water feeding to the gravel around the tube well casing. laying of delivery line for making of inter connections of top column pipe of new tube well by way of fabricating 900 ms bend out of 125 mm dia. ms pipe, welding of 2 no flanges one at each end. fabrication and fitting of 125 mm dia. ms pipe connection piece long as per site requirement with 90 degree bend with the help of nuts, bolts, washers, rubber sheet in between for leak proof joint. fitting of 1 no. 125 mm dia. heavy duty c.s. sluice valve through a connection piece as per site condition. fabrication, providing and fitting of 1 mm dia. heavy duty cast steel reflux valve. the sluice and reflux valve shall be confirming the isi standards and shall be of reputed make. fabrication and fitting of another 125 mm dia. connection piece flanged at both ends for working of washout by way of interconnecting delivery pipe through tee joint with the washout pipe.. fabrication and fitting of 1 no. blind flange at the end of washout. painting of exposed parts of the delivery line with two coats of anti rust primer and one coat of super enamel paint. the job also involves fabrication and fitting of one set of u-shaped clamps (for holding 125 mm dia. pipe) on the top column pipe for holding of column assembly on the casing and fabrication of 1 set of u- clamps to be used for extraction/ lowering of pump set along with column assembly. complete job includes cost of material, labour charges and carriage etc. and also making provision for wash out by providing and fitting of sluice valve of c.s of required capacity as per site conditions.lowering of submersible p

CTN :45671759

01 Jul, 2026 55.80 Lacs

Bhiwandi - Maharashtra

Tender For providing and supplying spare parts for all type of borewell as per requirement in b.n.c.m.c. area 2026-2027 - providing and supplying spare parts for all type of borewell as per requirment in bncmc area 2026-2027, :item no. 1 : providing and laying in trenches following mm dia. medium grade having embossed as isi mark galvanised iron pipes ?of kilogram/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats including removing existing pipe line if necessary and conveying and stacking the same in pwd chowky or as directed etc. complete. pwd ssr 2022-2023 pg no 268 41.20,41.21 25 mm dia, 32mm dia, item no. 2 : providing and supplying blue mdpe pipes conforming to iso 4427:1996 manufactured from virgin resin pe 80 food grade compounded raw material having blue colour only with quality assurance certificate from quality agencies like wrc / cipet (india) / dvgm / kiwa / spgn etc. for usage in drinking water system. the cost shall include testing of all materials, inspection charges, transportation up to store, transit insurance, loading, as specified and directed, unloading,stacking excluding gst levied by goi & gom in all respect, etc. complete as specified and directed.mjp dsr 2023-24 pg no 128/1/b 25 mm dia, 50 mm dia, item no 3 providing, erecting and giving test of centrifugal monoblock pump set conforming to is 9079 operating at 2900 rpm with ci impeller, priming funnel, cock, suitable flanges at suction and delivery side. pump shall have common shaft for pump and motor. motor shall be suitable for working on 415 v 10%, 3 ph, 50 hz a.c. supply. motor shall be tefc type. pump set shall be suitable for working at various discharge and head requirements. pump shall be erected on provided c.c. foundation block with suitable foundation bolts grouted in c.c. foundation block.centrifugal monoblock pump set (single stage) mjp mech.csr 2023-24 pg no 5 pm 2-1-5] 10 hp, item no 4 : supplying and erecting submersible pump 150 mm dia (with bronze / stainless steel (cf8m) impeller) up to 8 stages mjp mech.csr 2023-24 pg no 01 pm 1-2-1,pm 1-2-2] 1.5 hp, 2.0 hp, item no 5 supplying & erecting pressure booster pump, single phase, 50c/s, a.c.supply of 0.75 kw/ 1 h.p., with discharge of 480 to 13 lpm for 10 to 50 mtrhead & 25 mm suction/ 25 mm delivery pipe, for domestic pressure boosting applications pwd ele csr 2022-2023 pg no 206 12-6-2, item no 6 supplying & erecting pressure booster pump, single phase, 50c/s, a.c.supply of 0.375 kw/ 0.5 h.p., with discharge of 120 to 12 lpm for 10 to 40mtr head & 25 mm suction/ 25 mm delivery pipe, for domestic pressure boosting applications. pwd ele csr 2022-2023 pg no 206 12-6-1, item no. 7 supplying & erecting automatic control panel for 1 ph, 230 volt, a.c. submersible/centrifugal pump set up to 3 hp consisting of dol starter of suitable relay range s.p.p., combined ammeter/ voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip 54 protection. pwd ele csr 2022-2023 pg no 220 12-4-20, item no.8 supplying & erecting automatic control panel for 3 phase , 415 volt, a.c, submersible/centrifugal pump set up to 7.5 hp consisting of dol starter having relay range 9-14 amp,s.p.p., combined ammeter/ voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip 54 protection. control panel should offer single phasing, phase reversal, phase imbalance etc .pwd ele csr 2022-2023 pg no 204 12-4-17, item no. 9 supplying and erecting d.o.l. starter 400v. 3 phase, 50cycles with no volt coil and overload element with necessarymaterials and connected to supply for 10 h.p., item no 10 supplying & erecting flat flexible 3 core 2.5 sq.mm pvc sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.pwd ele csr 2022-2023 pg no 220 12-4-8, item no. 11 supplying, erecting & terminatin

CTN :45686658

02 Jul, 2026 3.47 Lacs

Mananthodi - Kerala

Tender For annual maintenance of gas crematorium equipment at mananthavadi municipality wayanad district proposed under 2025-26 annual plan. project no-1068 - civil work, od319315/2025-2026supply, replacement and servicing of automatic burner and fitting gas line., od319328/2025-2026cleaning of chimney surface, machinery repairing, removal of soot and rust, and applying primer with two coats of epoxy paint., od319385/2025-2026repairing damaged brickwork by removing broken bricks and replacing them with new bricks using cement mortar. the work also covers proper alignment,joint finishing, curing, and cleaning of the repaired area, complete as per direction of engineer-in-charge, od319413/2025-2026servicing and maintenance of the motor electrical system, such as inspection of wiring, terminals, switches and connections. it also covers tightening of loose connections, minor repairs, testiong for proper operation, and ensuring safe and smooth functioning of the motor., od319470/2025-2026reparing damaged or worn-out bed with 18 mm ss rod structures by alignment correction, replacement of defective parts if required, welding or fastening works, and ensuring proper strength and stability., od319499/2025-2026repairing of the gas valve system, such as cleaning , replacement of worn-out seals orcomponents if required, leak testing, and ensuring smooth and safe operation. the work shall be carried out as per safety norms., od319520/2025-2026removal of rust, scale, and old loose paint from equipment surface by wire brushing /scrapng, surface cleaning, application of suitable anti-corrosive primer, and finishing with two coats of approved paint. the work includes all materials, labour, tools and incidental charges required to complete., od319580/2025-2026comprehensive maintenance of the installed equipment for a period of one year, covering routine inspections,servicing, minor repairs,adjustments and ensuring continuous and safe operation. including survice of burner, blower, impeller and chimney. the rate includes labour, tools and incidental charges during the maintenanace period, excluding major replacements unless specified.

Rubber Paint Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government / Public Sector

State Government

State Government