Latest rubber snubber Tenders | Government rubber snubber Tenders

CTN :45292210

01 Jun, 2026 1.27 Lacs

Baramulla - Jammu And Kashmir

Tender For supply of ivory sheet , safety gloves , toilet sheet , pipe 4 inch , l bow 4 inch , t joints 4 inch , bit screw , socket 4 inch , nails 2 inch , chinese screw 25 mm , laser speed gun , breath analyser machine

Central Government/Public Sector

CTN :45306043

13 Jun, 2026 40.00 Lacs

Jammu - Jammu And Kashmir

Tender For maintenance of day to day complaints of water supply including connected items at various loc under ge nagrota - m&l for repair/rectification of leakage to water supply distribution lines 15 mm dia to 25 mm dia gi tubing by necessary excavation, returning/filling as required, tightening of loose joints of union, elbow, socket etc, threading if required including replacement of gi union/socket/nipple as required complete all as specified and directed., all as per srl item no.1 above but for gi tubing of 40 mm dia to 50 mm dia complete all as specified and directed., all as per srl item no.1 above but for gi tubing of 80 mm to 150 mm dia complete all as specified and directed., all as per srl item no.1 above but for gi tubing /di /ci /ms of 150 mm dia to 300 mm dia complete all as specified and directed. note : (i) the complaints for the above works shall be registered by contractor at the water supply complaint cell of age e/m (ii) stationary required such as complaint book, job cards etc shall be arranged by the contractor and proper record shall be maintained by the contractor.(iii) tools ,plumber with helper and transport with driver for attending of above complaints shall be arranged by contractor. (iv) the rate quoted by the contractor for above jobs under item no 1 to 4 shall be inclusive of cost of works under note (i) to (iii) above. (v) the said complaints shall be rectified within 12 hrs of the registration of the complaints failing which recovery of rs.500/commplaint shall be made for contractors due payment (vi) the stores/item required for the works under item no 1to 4 shall be measured separately under relevant item as supply only. (vii) excavation, returning/ filling shall be measured and paid for separately and material required for the works above shall be included to quoted rates., excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep including getting out in hard/dense soil complete all as specified and directed., returning /filling including watering , leveling , spreading and well ramming in layers not exceeding 25cm thick complete all as specified and directed., removing excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 50 metre above the starting point complete all as specified and directed., refixing/relaying of old retrieved steel tubing in new or old position with and including new gi fittings (connections) and as per site requiremen laid in trenches, above ground level or in any position of following sizes as under complete all as specified and directed : -, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, taking down unserviceable gi tubing / upvc tubing from any position complete with all fittings & connections from any position of following sizes as under complete all as specified and directed :-, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply and fixing/laying & testing of galvanised steel water tubing, medium grade, isi marked complete with all new galvanized fittings of following sizes laid in trenches/ above ground level or in any position complete all as specified and directed :, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply and laying upvc pipe tubings medium grade pressure rating 10 kgf/cm2 isi mark with all fittings such as elbow, bends, sockets, nipples and union etc and fixed complete laid in trenches or in any other position of following sizes as under complete all as specified and directed , 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply only gi fittings, medium grade, isi marked of following sizes as under complete all as specified and directed :-, union 15 mm dia, union 20mm dia, union 25mm dia, union 32mm dia, union 40mm dia, union 50mm dia, socket 15 mm dia, socket 20 mm dia, socket 25 mm dia, socket 40 mm dia, socket 50 mm dia, reducer socket 40mmx50mm, reducer socket 15mmx20mm, reducer socket 20mmx25mm, elbow 15mm dia, elbow 20mm dia, elbow 25mm

State Government

CTN :45127232

03 Jun, 2026 80.00 Lacs

Rewa - Madhya Pradesh

Tender For block-c building materials supply in central jail rewa m.p.2nd call - g.i. wire (thick/thin) , iron rod (3-sut) , iron rod (2-sut) , profile sheet , cement sheet , conduit pipe (various sizes) , iron flat bar , iron angle , floor tiles , wall tiles , cement (50 kg bag) , white cement , j-hook , allahabadi bricks , gravel mix , stone dust , sand (coarse) , mosquito mesh , iron mortar pan (tagari) , shovel , pickaxe , crowbar , paver blocks , wall putty , dr. fixit , iron sheet , cutter blade , building rods , hinges (4-inch) , l-drop bolt set , door latch , urinal (male) , urinal (female) , washbasin (wall-mounted) set , water tank (500-liter capacity) , pvc pipe 1½" (incl. elbows, tees, joints) , pvc pipe 1" (incl. elbows, tees, joints) , pvc pipe 2" (incl. elbows, tees, joints) , pvc pipe 3" (incl. elbows, tees, joints) , pvc pipe 4" (incl. elbows, tees, joints) , pvc pipe 6" (incl. elbows, tees, joints) , commode seat (set) , brass tee , brass elbow , teflon tape , water tap ½" , water tap 1½" , water tap 2" , water tap 3" , gate valve , socket 1" , socket 2" , socket 3" , socket 4" , socket 6" , solvent , gate valve 1" , gate valve 2" , gate valve 3" , gate valve 4" , gate valve 5" , aluminum door , aluminum window , plywood (30mm for doors) , flushes (in sets) , indian-style toilet seat , centering plywood , granite stone , false ceiling

CTN :45261223

10 Jun, 2026 NA

South Andaman - Andaman And Nicobar Islands

Tender For supply of 7900135000 loctite 549 , ek3010b-7903805000 copper washer 8x22x1 5 , ek3010b-7904117000 b s ring c20 60c7 , ek3010b-7904118000 gasket for injector , es6031d-00 mechanical seal , es6031d-1355067 packing perform , es6031d-1355103 packing perform , es6031d-5001012035 stud m12x1 75x35 8 , es6031d- 7248823000 locking plate , es6031d-7248827000 locking , es6031d-7248835000 gasket ring , es6031d- 7248846000 o ring , es6031d-7249022000 hex headed screw , es6031d-7250512000 set of cover joints for heat exhanger , es6031d-74254270000 pin lgcfo2 10x20 , es6031d-7426608000 chc screw m10x50 10 9 class , es6031d-7426744000 joint 65x65x2mm , es6031d-7426901000 fuel feed pump balmo , es6031d- 7432401000 fuel feed pump ccw engine , es6031d- 7442375000 gasket , es6031d-7447269000 flat gasket pn 40 dn65 t 1 5 , es6031d-7448821000 gasket , es6031d-7449306000 gasket , es6031d-7451518 socket screw , es6031d-7452311000 o ring , es6031d- 7452312000 o ring , es6031d-7462668000 gasket , es6031d-7506806000 seal bearing housing , ek3010b- 7248866000 piston ring , ek3010b-7248867000 piston ring , ek3010b-3005105000 zinc rod , ek3010b- 5050145000 circlip 45 x 1 75 , ek3010b-5050821000 copper washer 21 x 27 , ek3010b-5050835000 washer copper , ek3010b-6h715310pr exhaust temprature sensor , es6031d-7448712000 gasket , ek3010b- 7292504000 emergency push button , ek3010b- 7292532000 dc on off switch , ek3010b-7405062000 serrated bush , ek3010b-7448804000 expansion bellow , ek3010b-7531416000 male connector assy d28 g 1 , ek3010b-7903108000 spring , ek3010b- 7903312000 valve rocker bridge with pin , ek3010b- 7910103000 o ring no18 nse6 5 60c7 , ek3010b- ex00600103 mounting base with isolation and test cock , ek3010b-ex02400103 pressure transmitter 40 bar 24v dc 0p 420 , es6031d-43453374 low lub oil sump level switch , es6031d-5050610000 plain machined washer m10 , es6031d-7448990000 set of seal for p2 p4 valve , ek3010b-7426968000 threaded bush fuel feed pump , ek3010b-4h-333-03-0-00 fuel filter cartridge duplex type , ek3010b-7248829000 gasket ring , ek3010b-7907804000 flexible sealing joint , ek3010b-dv0-014-42-0-00 oil filter mann , ek3010b-f6-086-06-0-00 relay board ul , ek3010b- f602440000 relief valve assly , ek3010b-7607154000 terminal box with inbuilt amplifier , ek3010b- 7607182000 bearing , ek3010b-4h33303000 fuel filter cartridge , es6031d-7410341000 air starting pipe , es6031d-7410342000 air starting pipe , es6031d- 7410343000 air starting pipe , es6031d-7410345000 air starting pipe , es6031d-7410346000 air starting pipe , es6031d-7410347000 air starting pipe , es6031d- 7410348000 air starting pipe , es6031d-7597122000 propeller pitch indicator , es6031d-7903107000 spring collar , es6031d-7902620000 cyl liner light fuel assy , es6031d-7531001000 lub oil cooler , es6031d-7597102000 fuse holder , es6031d- 7597108000 fuse cartridge 20a , es6031d-7603480000 screw with expanded tappet , es6031d-7604787000 o ring an69 60c7 , es6031d-7604793000 o ring an53 60c7 , es6031d-7606450000 injector assly , es6031d- 7607193000 o ring , es6031d-7607535000 gasket , es6031d-7607910000 o ring ms 29513 228 60c7 , //bid details 2 / 101 es6031d-7904108000 blind nut , es6031d-7904240000 injector assly for sheathed pipe , es6031d- 7907706000 snap ring , es6031d-7907809000 clamping collar , es6031d-7925520000 pneu saf device on h turn gear , es6031d-ex00300103 pneumatic distributor pneu pneu , es6031d-ex09100103 regulator for fw temp 24vdc i prtd o p 4 20 ma , es6031d-ex10200102 switch 3 pos 1tc auto 2tc , es6031d-ex13000102 electro distributor , es6031d- 7526660000 h t water pump assly bronze , es6031d- 7596351000 horn off push button , es6031d- 7596383000 display pcb , es6031d-7596808000 bulbs 24v dc , es6031d-7597123000 pressure switch 1 bar , es6031d-7597137000 electro distributor , es6031d- 7597169000 filter 7 bar , es6031d-7607178000 gasket , es6031d-7607183000 gasket , es6031d-7607188000 gasket , es6031d-7904107000 lock nut bar , es6031d- ex08400103 distribu

CTN :45047373

21 May, 2026 NA

Gurdaspur - Punjab

Tender For bid to ras supply of bore , pvc connection with ptmt bolt and nut 15mm dia 450 mm length , waste cupling of cp coated half s steel sink 100 mm , stainless steel grating plate 125mm dia with or without hole , pvc internal kit for 10 ltr pvc flushing cistern , vitreous china wash basin 550 into 400 mm including brackets , gi union 15mm , aluminium door stopper alloy body , lock mortice 65 mm for doors , pvc stop cock 20 mm , pvc water tank cover for 1000 ltr tank , gi union 20mm , brass spindle half round for cp bib cock 15 mm , cp brass phase head for bib cock pillar cock concealed stopcock , gi tee 20 mm , jet spray cp with 1 point 2 mtr flexy tube , gi socket 20mm , brass spindle for cp pillar cock 15mm bore , pvc stop cock 15 mm ext threading , aluminium alloy anodised 125 mm long makeclassicargent , gi tee 15 mm , cp telephonic shower with 1 point 2 m tube with hose and hook , gi reducer elbow 20 mm into 15mm , gi socket 15mm , mild steel sliding bolts 300 mm long plate type , pvc water tank cover for 500 ltr , gi elbow 20 mm , cp concealed stop cock 15 mm , gi elbow 15 mm , mild steel barrel tower bolt 150 mm long , mild steel helical door springs including roller and roller plate , oil putty , gi reducer socket 20mm into 15 mm , aluminium anodised section 150 mm long , brass spindle half round for cp concealed stop cock , mild steel pressed stove enamelled black 150 mm , mild steel sliding bolts 250 mm long plate type , gi nipple 20mm into 125 mm , galvanised wire cloth mesh 0 point 56 mm nominal dia of wire , gi nipple 20mm into 150 mm , gi tank nipple 20 mm , gi nipple 15mm into 150 mm , gi nipple 15mm into 100 mm , plywood commercial 8 fett into 4 fett 12 mm thick grade bwr , gi nipple 15mm into 125 mm , gi nipple 15mm into 50mm , gi tank nipple 15 mm , towel ring brass chromium plated , gi nipple 15mm into 75mm , washer for syphone sets internal external dia of washer , aluminium alloy anodised sliding door bolt with hasp staple 250 mm long , plywood commercial 8 feet into 4 feet into 9 feet mm thick grade bwr , mild steel barrel tower bolt 200 mm long , teflon tape roll plumbing , pvc urinal pipe 40 mm dia 750 mm long flexible pipe , gi pipe 20 mm dia medium grade , plywood commercial 8 fett into 4 feet into 6 mm thick grade bwr , brass spindle for concealed stop cock , butt hinges, medium weight cold rolled mild steel 100 mm long , pvc bend pipe for superflow of flushing cistern , hex nipple 15 mm , gi plug 15mm , plywood commercial 8 feet into 4 feet into 4 feet mm thick grade bwr , mild steel mortice lock vertical type 2 levers 75 mm long with two set , vitrous china water closet seat ewc white , gi pipe 15 mm dia medium grade , aluminium alloy handles fabricated type, anodised 150 mm long , door seal with nylon brush side to of door shutter , thread roll good quality , tower bolt 125 mm long , mild steel powder coated hat and coat hook 6 nos of hook , statinless steel holder for curtain rod 25mm dia , mild steel wood screws size 19 iinto 10pack of 100 nos , mild steel full length threaded screws for iron window size n exc 15mm , mild steel cp coated hasp and staple 75 mm long , m-seal liquid , aluminium anodised, barrel tower section 200 mm long , pvc plugs for fixing screws to drill holes pack of 100 nos , sheet glass pin headed 4 mm thick. 4 feet into 4 feet , plywood commercial 8 feet into 4 feet into 19 mm , white cement shower rose 125mm joints brass chromium plated , stainless steel plate rack of size 900mm into 600mm thickness 1 mm , bib tap chromium plated 15mm dia isi marked, fancy type, angle valve cp brass 15mm bore, pvc cabinet looking mirror of size 600 into 450 mm , stop cock //bid details 2 / 82

Central Government/Public Sector

CTN :45241356

28 May, 2026 NA

Jalandhar - Punjab

Tender For supply of rubber snubber for axle box guide arrangement to icf drg. no. emu/m-0-1-016 alt j. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45167498

12 Jun, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of kit of locking pin and packing plates for bogie shop (detc) consisting of three items (1) locking pin for rubber snubber dia 6 x 162 drg. no. emu/m-0-1-017,item-1 qty.08 nos (2) packing plate drg. no.dmu/dpc5-0-5-508,item-1 qty.08 nos (3) packing plate drg. no.dmu/dpc5-0-5-508,item-2 qty.04 nos [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45154770

04 Jun, 2026 NA

Avadi - Tamil Nadu

Tender For supply of locking arrangement of axle box rubber snubber, as per drawing no. emu/m-0-1-017 alt d/3. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45120612

09 Jun, 2026 NA

Dahod - Gujarat

Tender For supply of rubber snubber for axle box guide arrangement to icf drg.no.- emu/m-0-1-016, alt-j/nil. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45117852

15 May, 2026 NA

Hubli - Karnataka

Tender For supply of rubber snubber for axle box guide arrangement (mg) to icf drg. no. mg/t-0-1-020 alt.l/6. matl. & specn. as per drg. [ warranty period: 30 months after the date of delivery ]

Rubber Snubber Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector