Latest rubber sole Tenders | Government rubber sole Tenders

Central Government/Public Sector

CTN :40957824

14 Jul, 2025 NA

Pune - Maharashtra

Tender For [goods, fabrication & supply of 6400 mm over riding derailing switches 1 in 8.5, t/out for bg (1673 mm) 60kg on psc sleepers to rdso drg. no. t-6068 alt.4 with latest alteration and conforming to specification no. irs: t-10-2025 with latest corrigendum issued up to the actual date of closing tender with suppliers rails complete with stock rails and all parts & fittings as listed in the drawing but excluding grooved rubber sole plates, insulating lines, elastic rail clips, plate screw, fish plates and fish bolts. n ote :- rails needed for fabrication of switch i.e. for stock rail and tongue rail shall be arranged by suppli er at their own cost in terms of railway board letter no. 2022/track-i(p)/fabricators dated 24.01.2022. sp ecification: irs/t-10-2025for fabricated switc [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40957318

16 Jul, 2025 NA

Bhavnagar - Gujarat

Tender For supply of special grooved rubber sole plate for sej conforming to rdso drg t-4159 with latest al terations. one set is equal to 12 nos. of grsp to drg no t-4159.specification irs t 55-2023 with latest alterations.the term latest alterations" wherever used will mean the alteration up to the actual date of opening of tender [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40960307

08 Jul, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of 52kg pit line bearing plate and fitting per set as under (1). c.i. bearing plate 52kg as per rds o no. mrc/w/pw/1/2004 = 01 no. (2). 6 mm thick grooved pad as per rdso no. mrc/w/pw/12-93 = 01 no . (3). 12mmthick g rubber pad 52kg as per rdso no. mrc/w/pw/10-93/52 = 01 no. (4). polyethylene inse rt as per rdso no. mrc/w/pw/14-93 = 04 nos. (5). ms spiral as per rdso no. mrc/w/pw/14-93 = 04 nos. (6). 28mm dia. anchor stud with nut (hot dip galvanized) as per rdso no. mrc/w/pw/14-93 = 04 nos. (7) . punched washer as per rdso no.mrc/w/pw/17-93 = 04 nos. (8). triple coil spring washer as per rdso n o. mrc/w/pw/15-93 = 04 nos. (9). nylon ferrule as per rdso no. mrc/w/pw/16-93 = 04 nos. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :40957568

28 Jul, 2025 NA

Waltair - Andhra Pradesh

Tender For manufacture and supply of 10 mm thick composite grooved rubber sole plate conforming to rdso drg. no. t-8998 for use on sharp curve with wider psc sleeper t-8979 to t-8982 suitable to 60kg (ui c)/60e1 rails fulfilling the requirement of draft irs specification irs t-55-2025 and draft str document no. tdg 0042 rev. 01 of rdso for conducting trails on difficult locations of ghat sections in ecor. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :40958033

11 Jul, 2025 NA

Bilaspur - Chhattisgarh

Tender For manufacture and supply of 6 mm thick nylon cord reinforced grooved rubber sole plat es for 60 kg 1 in 8.5 turnout (as drg mention in rdso letter no. ct/ptx dated 21.10.2021 or any upd ate) . specification irs/t-55/2023 with latest alterations. the term "latest alterations" wherever used will be mean the alteration up to 5 days before actual date of opening of tender. [ warranty period: 30 months after the date of delivery ]

CTN :40962945

25 Jul, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of pressure switch , bearing bush , rubber cord , bearing bush , bearing bush , rubber cord , bearing bush , oil seal , rubber cord , bearing bush , capillary thermometer (4 dial range 0 deg c to 125 deg c) , capillary thermometer (4 dial) , lub oil pressure gauge , clutch oil pressure gauge , rtd transmitter for p.no 45 (cut out 4-20ma military grade) , split oil seal , pressure switch , rtd(stem type) oil sump temp , sperical roller bearing , sperical roller bearing , sperical roller bearing , sperical roller bearing , sperical roller bearing , sperical roller bearing , locking washer , locking plate , hex. head screw , spring washer , sperical roller bearing , taper roller bearing , timken taper roller bearing , locking washer , hex. head screw , spring washer , hex. head screw , spring washer , hex.socket head cap screw , hex.socket head cap screw

CTN :40963126

25 Jul, 2025 NA

Leh - Jammu And Kashmir

Tender For supply of felt mech performed , sealing ring8 , gasket , o ring , ring sealing16 , packing performed , sealing ring , ring sealing8 , ring sealing2 , ring , hose , hose nonmetalic , canvas cover , gasket special , packing ring , ring sealing , boot , ring seal , seal plain , buffer , belt , ring sealing4 , felt mech preformed , sealing gasket , packing preformed , packing material , boot dust moisure seal , framing gasket , bushing sleeve , retainer seal , hose gen cooling , retainer packing , hose 48mm , ring sealing32 , hose 18mm , end piece , cup and spring , packing , seal rubber strip , gasket engine plate , seal , shock absorber ) /bid number : gem/2025/b/6396619 * /dated: 04-07-2025 & & / bid document 1 / 73

CTN :40967686

18 Aug, 2025 NA

Gonda - Uttar Pradesh

Tender For supply of cms crossing for bg. 60 kg (uic) on psc sleepers 1 in 8.5 to rdso drg. no. t-4967, alt.8 complete with all fittings as listed in the drawing excluding grooved rubber sole plates, check rails, insulating liners, fish plate, fish bolts and nuts, elastic rail clips and conforming to irs specification no. irs:t-29 revised 2024 for cast manganese steel crossings (the alteration in drawing and specification issued by rdso up to tender closing date shall be applicable to this tender).

CTN :40950998

23 Jul, 2025 NA

Chennai - Tamil Nadu

Tender For procurement of arrester barrier spares - sppr, nyloc nut m12mm with plain washer, plate large, plate small, winch cable, top mounting warning light (led), rubber pad (stopper), tension cable, limit switch, over ride safety limit switch, roller assy, packing, hex head bolt and washer m16x1.5x64mm long, suspension cable, rotary lip type seal 150180 (type4), wera plate, wear plate, sheave pulley assy, spacer small, winch cable, mast lamp assy, handle, limit switch, over ride limit switch, packing, cover rubber, shaft, suspension cable, remote control panel assy, vaccum circuit breaker (vcb) 11kv, shock absorber assy, gasket, belt, nut nylock (m12x1.75), pressure roller assy, leaf spring plate assy, blockin diode 50v1a, 1.5sqmm apc conductor (7/0.5mm) pvc isulated, 12core, 1100v grade as per is1554, contactor 220volt 22amp, o2 o/l over load relay, control relay auxiliary contactor, glass fuse 2amp&5amp, glass fuse, shock absorber, side plate large, side plate small, non hardening compound hold tie, indicating lamp up & down (il1-il), signal cable, bridge rectifier, shaft with two nyloc nuts m12x1.75 and washers, control relay with off delay timer la3-d22, nylon cordage braided 8901070, outside circlip dia 20mm, hex bolt nut with spring & plain washer m10x80mm long, ratchet lever hoist (3.2t) bi-directional, cordage nylon, belt (width 63mm,34oz,4layer,7m long), grease nipple m5, protective cover for shock absorber

CTN :40949790

11 Jul, 2025 2.43 Lacs

Delhi - Delhi

Tender For providing childrens playground equipment (jhula) in west campus near kendriya bhandar park of iit delhi. - childrens playground equipment, supply and installation of childrens playground equipment supply, delivery, and installation of a factory-fabricated suitable for children, constructed from high-quality powder-coated galvanized steel and weather-resistant hdpe or plastic seats and handles. the equipment shall consist with anti-slip grips and ergonomic support, mounted on a central pivot frame with heavy-duty bearings to ensure smooth and safe operation. all materials used shall be uv-stabilized, rust-resistant, and conform to playground safety standards. the equipment shall be securely anchored into a concrete foundation as per the manufacturer s specifications, complete in all respects including excavation, foundation, backfilling, and finishing to the required level.(the equipment must accompanied with test reports for quality, safety, durblity, and proper functioning of equipment), 1) providing and fixing deluxe 2 see saw as per specifications, 1.1) deluxe 2 see saw:- product area: minimum 2500 mm x 350 mm. safe play area: minimum 4500 mm x 1500 mm. see saw lever is made up of minimum 100 nb gi b- class pipes. lever length willbe minimum 2500 mm long. lever ends are coveredwith gi pipe end cap. two nos. of seats are made up of lldpe plastic with inbuilt handle. stand is made up of minimum 80 nb gi b-class pipes. two no of pedestal bearing are given for smooth and noiseless movement of see saw lever. bearing is covered with nylon cover, 2) providing and fixing of deluxe slide as per specifications, 2.1) deluxe slide ae301 structure made of 35mm x 4mm angle iron frame slide: g.i. sheet slide length: 6ft, 3) providing and fixing of kids merry go round as per specifications, 3.1) frp platform merry go round:- product area: minimum 1500 mm diameter. safe play area: minimum 3000 mm diameter. the platform of merry go round made up offibre reinforced plastic. the ring on which the frp platform is based. barcode on machine to show the proper use of machine., 4) providing and fixing of horse rider as per specifications, 4.1) horse rider product area: minimum 900 x 350 mm. safe area: minimum 2700 mm x 950 mm. spring assembly is made up of square plates & compression spring. compression spring is made up of minimum 18 dia wire, spring dia is minimum 200 mm and height is min 300 mm (+10%). stand is made up of minimum 40 nb b class g.i isi mark pipes of reputed make (jindal/bhushan/tata) plate is welded on it to fix plastic bike on it firmly. all welded joints are properly groundedand coated with an epoxy sealant for rust resistance. all sharp edges and corners are properly ground before painting. powder coat done by first coat of superior brand primer 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness. character is made up of lldpe plastic with rotational moulding process which is nonageing, non-toxic and have u.v. stabilizers for colour resistance. length of bike is minimum 850 mm long and weight is minimum 7 kgs. it has inbuilt handle and foot rest., 5) providing and fixing of triple swing side as per specifications, 5.1) triple swing, side pipe - 35 mm upper pipe - 50 mm seat - rubber sheet chain - 3 mm.

Rubber Sole Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government And Public Sector