Latest rubber stator Tenders | Government rubber stator Tenders

State Government

CTN :45738724

15 Jul, 2026 NA

Ukai - Gujarat

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - wt-5196g - (bmd-6) work of rubber lining of various equipments, pipes and fittings for dm plant and cpu plant of utps unit 3 to 6 on as and when required basis; as per s..

CTN :45732495

08 Jul, 2026 NA

Ambala - Haryana

Tender For supply of high flow pump spares spares for high flow progressive cavity pumps , , model no:- rbh - 8180 aabn (pump size :- 8" x 8") for a.h pump , model no:- pslh 8170 aabn pump sizes:- 8" x 8" (for sugar melter) , model no:- , rmoh 6170 aabn pump sizes:- 6" x 6" (for b.h,(cl molasses pumps 02 nos) , model no:- pslh 6160 pump sizes:- 6" x 6" (for a.l. & f.m molasses pumps) , model no:- pslh 4150 pump sizes:- 4" x 4" (for (c 1) molasses , spares for high flow progressive cavity pump make:- risansi industries ltd. model :- rmoh ag 6160 for :- grain , spares for high flow progressive cavity pump make:-risansi industries ltd. model no. :- rbh 8180 aabn pump sizes :- 8" x 8" (for a.h pumps of centrifugal station) , s.s rotor , shaft head , s.s sleeve , head pin ( part no. 229) , sleeve ring , seal ring , pin (part no. 231) , connecting rod , rubber boot , protector , circlip , spares for high flow progressive cavity pump make:-risansi industries ltd. model no :- rboh ag 6160 pump sizes :- 8" x 8" (for sugar melter , b.h & c.l. pumps) , s.s rotor , sleeve ring , pin , head pin , rubber boot , s.s sleeve , shaft head , circlip , protector , connecting rod , seal ring , bush , spares for high flow progressive cavity pump (pslh 6160) make:- risansi industries ltd. pump sizes :- 6" x 6" (for a.l. & f.m molasses pumps) , s.s rotor , seal ring , rubber boot , pin , head pin , s.s sleeve , protector , circlip , sleeve ring , shaft head , spares for high flow progressive cavity pump make:- risansi industries ltd. model :- pslh 4150 aabn pump sizes :- 4" x 4" for (c1) molasses , s.s rotor , seal ring , rubber boot , pin , head pin , s.s sleeve , shaft head , sleeve ring , bush , connecting rod , circlip , spares for high flow progressive cavity pump make:- risansi industries ltd. model :- rmoh ag 6160 for :- grain , s.s sleeve , seal ring , spares for high flow progressive cavity pump make:- risansi industries ltd. model no:- , rmoh 6170 aabn pump sizes:- 6" x 6" (for b.h, (c.l molasses pumps 02 nos) , s.s rotor , s.s sleeve , head pin ( part no. 229) , sleeve ring , seal ring , pin (part no. 231) , connecting rod , bush , rubber boot , protector , circlip , spares for high flow progressive cavity pump model:- aip 4050 s make:- akanshi industries pump sizes :- 4" x 4" , rubber stator , rubber seal ring , spares for high flow progressive cavity pump model:- aip 6060 s make:- akanshi industries pump sizes :-6" x 6" for f.m. pumps , rubber stator , coupling rod , shaft head , pin , rubber boot seal , rubber seal ring , rubber sleeve ring , bush , s.s rotor , circlip lock , c.i. 3 groove v-belt pulley section-c with pilot bore , od = 305 mm , od = 380 mm , od = 450 mm

CTN :45713046

13 Jul, 2026 85.0 Thousand

Ghatampur - Uttar Pradesh

Tender For supply of ss pin for high flow pump , rubber boot seal , rubber stator for high flow , rubber stator plain , rubber stator with barrel for high flow pump , head pin for high flow pump , rubber stator , seal ring for high flow pump , sleeve ring for high flow pump , ss head pin for high flow pump 8inch , seal ring for high flow pump 8inch , sleeve ring for high flow pump 4inch , sleeve ring for high flow pump 6inch , ss bush for high flow pump 4inch , ss bush for high flow pump 6inch , ss bush for high flow pump 8inch , ss bush for high flow pump roto type 8inch , seal ring for high flow pump 4inch , head pin for high flow pump 6inch

CTN :45704226

11 Jul, 2026 2.99 Lacs

Gajraula - Uttar Pradesh

Tender For supply of high pressure pump spares b b - ss rotor risansi make , rubber stator risansi make , ss bush risansi make , ss pin risansi make , ss connecting rod risansi make , shaft head risansi make , circlip lock risansi make , ss shaft risansi make , ci berrel risansi make , crease seal risansi make , head pin risansi make , cs berrel risansi make , stuffing box risansi make , head key risansi make , bearing housing risansi make , sleeve risansi make , rupper seal risansi make , rubber sleev ring risansi make , high flow pump ropman make , rubber stater ropman make , ss bush ropman make , ss pin roopman make , ss connecting rod ropman make , shaft head ropman make , lock roopman make , ss shaft ropman make , ci berrel ropman make , grease seal ropman make , head pin ropman make , cs berrel ropman make , stuffing box ropman make , head key ropman make , bearing housing ropman make , sleeve ropman make , rubber seal ring ropman make , ruber sleeve ring ropman make

State Government

CTN :45704840

30 Jun, 2026 NA

Ambala - Haryana

Tender For providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 3. 80 mm i/dq , providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 1. 80mm i/d cid joint ,providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 2. 100mm i/d cid joint , providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 3. 150mm i/d cid joint ,providing, lowering, laying in trenches, aligning, fixing in position and jointing ductile iron (di) isi marked k-9 grade sands pipes as per 15:8329-2000 (amended up to date), with internal cement mortar lining for potable water with rubber ring (epdm/sbr) joints as per is: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per technical specifications and as per direction of engineer. note: e/w to be measured and paid separately ,earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. all kinds of soil. , demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) ,providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size)

State Government

CTN :45704964

30 Jun, 2026 NA

Ambala - Haryana

Tender For cc interlocking paver blocks providing and laying 100mm thick factory made cement concrete interlocking paver block of m -35 grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over (bis 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of engineer-in-charge. ,providing, lowering, laying in trenches, aligning, fixing in position and jointing ductile iron (di) isi marked k-7 grade sands pipes as per is:8329-2000 (amended up to date), with internal cement mortar lining for potable water with rubber ring (epdm/sbr) joints as per is: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per technical specifications and as per direction of engineer. , earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. all kinds of soil. ,demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size)

CTN :45513738

30 Jun, 2026 3.50 Lacs

Saharanpur - Uttar Pradesh

Tender For corrigendum : rubber stator collar type , ss rotor , coupling rod bush , coupling rod pin , boot seal , seal ring , sleeve ring , coupling rod , bearing shaft , bearing housing , pump housing , grease seal plate , stuffing box ci gland houssing , gland plate , sleeve , circlip , head lock , head pin , oil seal , water thrower , shaft head , bearing spacer , ci pump pulley , ci motor pulley , mettallic stator , bearing shaft drive shaft , stuffing box c.i. gland houssing , gland , metal bonded rubber stator , coupling rod pin s.s

CTN :45689246

16 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For providing of repair and overhauling service - repair/ refurbishment, upgradation and installation of alternative pump testing facility; as per scope of work; no; buyer premises repair of 03 nos. electromagnetic flow meter, lining hard rubber, fluid fresh water, size dn 200. flow up to 350 m3/hr.

CTN :45497504

10 Jul, 2026 NA

Kollam - Kerala

Tender For corrigendum : rubber lining work of slurry storage tank f 401 d in u 300

State Government

CTN :45671133

01 Jul, 2026 NA

Ranchi - Jharkhand

Tender For government of jharkhand through its public works department (pwd) is engaged in framing / revision of schedule of rates and as part of this endeavor, quotations through e-tender are invited for rate of items / materials annexed as annexure-1 .- manufacturing, supply, delivery of double chambered restrained joint di k9 pipes confirming o is 8329 (restrained joints are designed and tested as per iso 10804) (to be used to for minimum required length as per design along with double chambered restained di fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to is 5382- 1985/ 8329- 2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specials., note:- the rates are f.o.r. at worksite in jharkhand including royalty, inspection charges and other taxes but excluding gst & c.p., 100 mm , 150 mm , 200 mm, 250 mm, 300 mm, 350 mm , 400 mm, 450 mm, 500 mm, 600 mm, 700 mm, 750 mm, 800 mm, 900 mm, 1000 mm, double chambered restrained joint di fittings, manufacture, supplying and fitting ductile iron double chambered restrained joint fittings confirming to is 9523 : 2000 (restrained joints are designed and tested as per iso 10804) of class k-12 (alternative and to avoid concrete thrust block along with minimum length of restrained joint di pipes at bends) including rubber gaskets etc. complete but excluding taxes., note:- the rates are f.o.r. at worksite in jharkhand including royalty, inspection charges and other taxes but excluding gst & c.p., 1. fitting upto 500mm dia, 2. fitting above 500mm dia, di double flanged pipe: providing and supplying isi mark centrifugally cast (spun) ductile iron pressure pipes with double flanged (welded) end of 100 mm and above all diameter for water works confirming to is 8329/2000 in the standard working lengths of 1, 2, 3, 4 & 5 m suitable for classification k-9 with cement mortar lining inside the pipes with outside zinc and bittuminous coating., note:- rates are f.o.r. at worksite in jharkhand incluing royalty, inspection charges and other taxes but excluding gst & contractor profit., pn- 10.0, dia of pipe: 100 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 150 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 200 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 250 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 300 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 350 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 400 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 450 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 500 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 600 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 700 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 800 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 900 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 1000 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., di double flanged pipe: providing and supplying isi mark centrifugally cast (spun) ductile iron pressure pipes with double flanged (welded) end of 100 mm and above all diameter for water works confirming to is 8329/2000 in the standard working lengths of 1, 2, 3, 4 & 5 m suitable for classification k-9 with cement mortar lining inside the pipes with outside zinc and bittuminous coating., note:- rates are f.o.r. at worksite in jharkhand incluing royalty, inspection charges and other taxes but excluding gst & contractor profit., pn- 16.0, dia of pipe: 100 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 150 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr.

Rubber Stator Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government