Latest rubber washer Tenders | Government rubber washer Tenders

Central Government/Public Sector

CTN :45588458

01 Jul, 2026 NA

Kalka - Haryana

Tender For supply of metal braided flexible connection pipe with nut & rubber washer having following specification: (1) length of connection pipe - 450mm (2) connection pipe material rubber pipe metal braided (3)connection nut material -brass (4) washer material natural rubber (5) connection threaded size - 15mm (6) pressure rating - 8 kg/cm2 [ warranty period: 12 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45593620

24 Jun, 2026 NA

Shakti - Chhattisgarh

Tender For supply of s.s. waste coupling of size outer dia- 38mm, flange dia- 65mm, flange thickness- 0.5mm, length- 80mm with check nut and 5mm thickness rubber washer. make-shakti or similar ( image enclose) [ warranty period: 30 months after the date of delivery ] ]

CTN :45588676

06 Jul, 2026 NA

Jamalpur - Bihar

Tender For supply of lower rubber washer for axle box guide arrgt. of m / coach to icf drg.no.emu/m-0-1-008 alt.s/6(small s by 6) as per specn. rdso spec. no. r-64/98; rev. 2 of 2005. [ warranty period: 30 months after the date of delivery ] ]

CTN :45576674

07 Jul, 2026 NA

Howrah - West Bengal

Tender For supply of machined washer for wap4 bolster of size: id-50 mm, od-90 mm and thickness - 10 mm. material-en8. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45469943

19 Jun, 2026 NA

Thiruvarur - Tamil Nadu

Tender For bid to ras tender for supply of air force rounb2b39del 24 cm , split pin 3 by 16 , cable connector , 1 inchjubilee clip , jubilee clip inch , door lock handle inner , handle regulator glass , hex head screw m835 , hex screw m412 , hex screw m1235 , bonnet catch , cap screw , bolt with nut , clamp , first aid box , cable battery ve to starting , cable battery ve to earth , bolt ft seat , locking plate , rubber washer , battery lugs , banjo washer , rubber washer , nut and bolt for propeller shaft , set screw , channel glass run , screw , reflector , rubber beading centre , upper half thrust washeer , door lock lh , door lock rh , knob door lock , assy door handle outer , jubilee clip medium , safety seat belt , nut and bolt with washer , jubilee clip 2 inch , valve core , jubileeclips half inch , gasket maker , cable eyelet heavy duty big , nut and bolt , battery terminal eyelet , terminal battery cover , banjo washer , cable elect 8mm , washer for banjo bolt

CTN :45574728

23 Jun, 2026 NA

Poonch - Jammu And Kashmir

Tender For annual fixing of rates for supply of workshop material as per rec/is/pdd approved standard and rec drawings, in the jurisdiction of electric division(jpdcl) poonch for the financial year 2026-27 (all the items should be as per latest specifications and drawing adopted/approved by department) - items, se. aluminum winding wire (round) in sizes 12 to 21 swg, dpc aluminum winding wire (round) in sizes from 12 to 21 swg., dpc aluminum strip of sizes for lv winding of distribution transformers 25kva to 250kva, se. aluminum winding wire (round) in sizes 12 to 21 swg.( in exchange of one kg of scrap including insulation coverage ie salvaged conductor), dpc aluminum winding wire (round) in sizes from 12 to 20 swg.(in exchange of one kg of scrap including insulation coverage ie salvaged conductor), dpc aluminum strip of sizes for lv winding of dist. transformers 25kva to 250kva.( in exchange of one kg of scrap including insulation coverage i.e. salvaged conductor), se copper winding wire (round) in sizes 11 to 22 swg., dpc copper winding wire (round) in sizes 11 to 22 swg., dpc copper strip of sizes for lv winding of distribution transformers 25kva to 250kva., se copper winding wire (round) in sizes 11 to 22 swg.( in exchange of one kg of scrap including insulation coverage ie salvaged conductor), dpc copper winding wire (round) in sizes 11 to 22 swg.( in exchange of one kg of scrap including insulation coverage ie salvaged conductor ), dpc copper strip of sizes for lv winding of distribution transformers 25kva to 250kva. ( in exchange of one kg of scrap including insulation coverage ie salvaged conductor ), lv. brass bush rods 12 mm, lv. brass bush rods 20.mm, lv. brass bush rods 25.mm, lv. brass bush rods 30mm, hv. brass bush rods 12 mm, buy back of scrap/old brass bush rods, cork washer for lt bushings big / small, cork washer for ht bushings big / small, lt rubber washers (small m12 & m20) (large m12 & m20), ht rubber washers, ms washers for lt, gutka for ht bush, hv bushing (11kv) 12mm, lv bushing 12mm, lv bushing 20mm, lv bushing 25mm, cotton tape 1 (size), length 25 mtr, nawar tape 1 (size), old cotton sari / cloth, rubberized cork sheet 4mm thick, rubberized cork sheet 5mm thick, cork strip 5mm thick, lethoride paper, electrical grade kraft paper, packing sheet 1 mm, packing sheet 1.5 mm, varnish dr. beck, m seal, fevicol, glass wool sleeves of sizes, backlite tubes, inch inch(i mtr length), packing gutties, manual operated oil pump, transformer oilas per the specifiction of is-335 amended from time to time, ms nuts andd bolts full thread size 1/2 in to 3 in, ms plug and caps 1/2", 3/4", 1", 1.1/4", 1.1/2"confirming to relevant is code amended upto date, film paper 7milsconfirming to relevant is code amended upto date

CTN :45544090

29 Jun, 2026 2.15 Lacs

Shahjahanpur - Uttar Pradesh

Tender For supply of ci solid round rough machined bush on conversion basis all size , ci scrapper for mill roller 30 60 on conversion basis rough machined , ci pulley rough machined of different size on conversion basis , ci washer casted as per drawing on conversion basis , ci coupling size 8 on conversion basis , ci coupling as per drg no misc 79 t on conversion basis

CTN :45567428

06 Jul, 2026 NA

Kanchrapara - West Bengal

Tender For supply of (i) ss hex screw m 6 x 25 mm as per specification is: 1364-92, pt-2 ce (ii) ss nylock nut m 6as per is: 7002 - 1991 (iii) ss machined washer a 6.4 as per is: 2016-1967. each item 01 no/set. make/brand: tvs/unbrako/dfl/tuff [ warranty period: 30 months after the date of delivery ] ]

CTN :45554261

29 Jun, 2026 NA

Seoni - Madhya Pradesh

Tender For supply of jalpraday samagri item - pvc pipe (3" heavy, 20 ft), pvc socket (3"), pvc elbow (3"), pvc tee (3"), pvc solvent (100g), pvc socket (6"), pvc elbow (6"), pvc tee (6"), black flange rubber gasket (6"), leather sheet, gi pipe (2", 20 ft), gi long socket (2"), gi nipple (2" - 0.5 ft, 1 ft, 1.5 ft, 2 ft, 2.5 ft, 3 ft), hacksaw frame (large), double-sided hacksaw blade, ci non-return valve (2"), ci check valve (3"), plastic tank valve (3"), ci tailpiece (3"), ci flange (2"), ci tailpiece (4"), ci tailpiece (6"), ci flange (3"), ci flange (6"), ci hose connector (3"), ci hose connector (4"), ci hose connector (6"), nylon rope (12/8), spindle rod (3", 4", 6"), gi union (3"), flange rubber washer (2", 3", 4"), raw rubber, electrical tape, gi elbow. 2-inch starter, 7.5 hp starter, 12.5 hp starter, 2 hp panel, 5 hp panel, 3-core copper cable (6 sq. mm), hdpe coupler, 7.5 hp submersible motor, 10.5 hp submersible motor, 12.5 hp submersible motor, 5 hp submersible motor, 2 hp submersible motor, 7.5 hp auto-switch, 10.5 hp auto-switch, 63 amp grip, 100 amp grip, 200 amp grip, fuse wire, 2-3 inch reducer, 3-4 inch reducer, 2-inch gi union, 4-inch gi union, 7 kg hammer drill machine, metal-cutting grinder machine, 1-inch upvc pipe, 1/2-inch upvc pipe, 3/4-inch upvc pipe, 1/2-inch upvc socket, 1/2-inch upvc elbow, 1/2-inch upvc tee, 1/2-inch upvc brass elbow, 1/2-inch upvc brass tee, 1/2-inch upvc cap, 3/4-inch upvc socket, 3/4-inch upvc elbow, 3/4-inch upvc tee, 3/4-inch upvc brass elbow, 3/4-inch upvc brass tee, 3/4-inch upvc cap, 1/2-inch plastic tap, no. 18 chain wrench, no. 12 chain wrench. no. 24 ring spanner, no. 36 ring spanner, ring spanner (21-23), ring spanner (18-19), ring spanner (16-17), open-end spanner (21-23), open-end spanner (18-19), open-end spanner (16-17), taparia screwdriver, large screwdriver, small screwdriver, ammeter, voltmeter, large iron shovel, small iron shovel, 18-inch plastic pan (tasla), double-sided iron pickaxe, large iron crowbar, wooden base, 21 kg breaker machine, grinder blade, nut-bolt (no. 21, 6-inch), nut-bolt (no. 18, 2-inch), nut-bolt (no. 17). pipe wrench (2-inch, 2.5-inch, 3-inch), reducer (3-2 inch, 3-2.5 inch), ring spanner (14-15, 12-13), open-end spanner (14-15, 12-13), large tester, 11kv gloves, alum, bleaching powder, liquid chlorine, water test kit (with chemicals), union (2-inch), rubber packing, wrench (2.5-inch), socket (2.5-inch), nipple (1.5-inch, 1 ft), nipple (6-inch, 1 ft), large iron hammer, handpump pipe (1.25-inch, 10 ft), handpump chain, handpump bearing, handpump cylinder, handpump upper valve (brass with rubber), handpump lower valve (brass with rubber), handpump axle (with nut), handpump body nut-bolt (no. 18, 2-inch), water tank (500l, 1000l, 750l), gi tanker valve (3-inch), measuring tape (100m), pvc pipe (4-inch, 20 ft; 6-inch, 20 ft), gi pipe (4-inch, 20 ft; 3-inch, 20 ft).

CTN :45561787

22 Jun, 2026 NA

Parganas - West Bengal

Tender For supply of spare parts for kraz veh - connector 10 mm part no nk, connector 08 mm part no nk, rubber washer 14mm part no nk, ms washer 14mm part no nk, copper washer 14mm (aps) part no nk, copper washer 10mm (aps) part no nk, copper washer 8mm (aps) part no nk, copper washer 18mm (aps) part no nk, spring washer 16mm part no nk

Rubber Washer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government / Public Sector