Latest running machine Tenders | Government running machine Tenders

Central Government/Public Sector

CTN :45637786

22 Jun, 2026 NA

Dahod - Gujarat

Tender For auction sale of depot ferrous scrap - scrap released ferrous from lcw and others consisting of corroded material, ms cutting wagon plate, corroded plates, old sheet, drums, pipes, all type of junction & location box, all types of ms boom, crimping tool, mike with stand, fire bucket, tool kits, gas blow lamp with gas tank, first aid box, hexa frame , double ended spanner set, cutter, twizer, hammer, scrw drivers, ring spanner, plier, different type of drill bit, box spanner, rotar oil pump, de ring spanner, file half round, different size of racks, attenuator, allen key, grider machine, pully single way, goodrej lock, pad lock, vice bench, chisel, file flate, tourch hand cell, ic remover different type, hack saw, socker wrenall type of ms, steel wires, corroded angle, channel, signalling item, signal post, base, connecting rod,electric fitting, panel,loco related materials board wire rod saria, panel, almirah, chair, table small pieces of ms/cs, iron rod, side body fillter jali and other corroded misc.items of all type of ms/cs kachra of sorts and sizes and old used unserviceable., (except wta items, spring, rail).. ( 04 nos. cutting allowed in junction & location box & 01 nos. cutting allowed if material is long than length of loading truck). material should be loaded with one end from lot as per description. mode of delivery by actual weight. fdp 40 days.

Central Government/Public Sector

CTN :45637787

22 Jun, 2026 NA

Dahod - Gujarat

Tender For auction sale of depot ferrous scrap - scrap ms junk ferrous released from lcw and others consisting of corroded material, girder plate,door,tie bar cast iron signaling material, location box full and half,padastal for gate(signaling) ms cutting ,hand lorrey,st sleeper, wagon plate, fire bucket, fire extinguisher, parts of blower, guard sheet, driver sheet, all type of brake cylinder, gi doors, angle & sheet,all type of beds of pipe & angle, corroded ms rings, released nut bolt rivets , shackle pin, jali, fan jali, em & rubber pads, all types of headlights, doors corroded plates, sheet, drums, pipes , corroded angle , channel, tank, ms fitting, panel board, panel box, wire, rod, saria, signaling ms/gi items,panel, small pieces of ms/ci, iron rod,ele. loco parts, side body and other wagon parts corroded misc.items of all type of ms/ci scrap of sorts and sizes and old used unserviceable., (except wta items, spring, rail). fdp 40 days. material should be loaded with one end from lot as per description. cutting will be allowed for easy loading. mode of delivery by actual weight.

Central Government/Public Sector

CTN :45637763

29 Jun, 2026 NA

Kota - Rajasthan

Tender For auction sale of others - pl no- 98050035 old & u/s c&w office shed consisting of ms angle, ms flats, ms sheet, gi pipe off size, bolt nut, rivets, ms fitting, gusset plates, ismb & ishb, ms round bar bracing and attachments if any etc. total qty.=14.025 mt. for stock holder sse/w/ggc. ss-11 no.-sse/w/ggc/scrap/2026-27/07 date 18.05.2026. ds-8 no.-875512 dt.08.05.2026. lot should be sold on as is where is basis. purchasers are requested to see the lot/site and approchable road before bidding. no claim will be entertained after sale of lot. the stock holder is responsible for any alteration, deletion & variation in the lot or in weighment or tempering with the lot will be solely responsibility of stock holder after joint inspection, if any found subsequently. bidders must submit the fixation of the delivery date through the ireps e-auction sale module at least 7 days prior to the delivery date. all necessary safety precautions shall be strictly adhered to by the purchaser at their own risk and responsibility. the purchaser shall be solely and entirely responsible for any negligence or mishandling. delivery will be given by actual weight on government approved dharam kanta only. note-cutting may be allowed for easy loading. the purchaser of the awarded lot are advised not to wait for last date of fdp considering the forthcoming mansoon season. all efforts should be made to lift the lot as early as possible. the material are lying in rajasthan state.

CTN :45637650

30 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap melting in which includes ms hanger, buffer patch, lever, silent block with negligible rubber attachment, broken ms roller bering without brass case, broken ms ball bering, bering cage, m paid, yoke lever, tensioning device, tension rod, spare parts of cbc, light weight/small spring, ms coller, wearing plate, fish pale, nut- bolt, revits, retaining cap, buffer spendle, handle, small size of ms plates/sheets and strip, hose pipe clip, ms window frame lever/strip, dog spike, round spike, vertical/lateral shock absorber, different type of bmbc parts such as cylinder body, piston, piston packing, plunger, plunger spring, circlip, piston trunk, tee bolt, ratchet, adjusting tube, released spring, spring washer, iron washer, knuckle, small cutpics of pipe, ms bush, hand brake trunnion, split pin, cotter, spare part of rail fittings, jubilee clip, dust excluder, latch, shim for plunger, special washer, ms ring, slotted nut, hex head bolt, empty casing of air brake cylinder, flange, bmbc cover, inculiding some new but absolute items available with or without negligible nf, wires, lugs etc attachments, in various sizes and other similar/unknown ferrous item which comes under melting scrap. location: - west side of erwb. in area- g. lbpl, dbaw, gst-18%, tcs -1% , hsn code-72045000, allocation-20714208

CTN :45637657

30 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot miscellaneous scrap - scrap consists of electrical accessories, including light fittings with frames, berth reading light fittings, fl chokes, fan regulators, electronic ballasts, emergency light units (without batteries), broken solar plates, capacitors, electronic regulators, electric transformer, broken fan armature, various types of mccbs, lccbs, and their boxes, d.p. switches, train light fittings, connectors, all types capacitors etc. these may have negligible non-ferrous (nf) attachments and come in various types and sizes. additionally, the scrap may contain other similar known or unknown electrical items. not fit for railway use. conditions: (1)the lot will be sold on an "as-is, where-is" basis, and the provided weight is only an estimate. (2) no claims regarding the quality, quantity, or condition of the material will be entertained after the sale. location: - in godown no-98/13 (along with west wall) lbpl, dbaw, gst-18%, tcs -1% , hsn code-72044900 , allocation-20714208

CTN :45627779

29 Jun, 2026 NA

Palakkad - Kerala

Tender For material procurement - material work, stone aggregate(single size): 40+b14:b93 mm nominal size, stone aggregate(single size):20 mm nominal size, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), sundries, wall form panel 1250x500 mm, corner angle 45x45x5 mm 1.50 m long, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, m.s. tube 40 mm dia, twisted steel/deformed bars, stone aggregate(single size): 10 mm nominal size, stone for masonry work, solid blocks of size 30x20x20cm, wall form panel 1250x450xmm, corner angle 45x45x5 mm 2.50 long, column clamp 450x1070 mm, prop 2 m (2-3.5m), structural steel such as tees, angles, channels and r.s. joists, red oxide zinc chromate primer, adjustable telescopic prop 3 m (2.02-3.75m), beam clamp 300-380 mm (450-1070 mm), second class kail wood in planks, second class kail wood in scantling, hollock ballies 125 mm diameter, adjustable span eso+si (2.35-3.40), solid blocks of size 30x20x15cm, mild steel tubes electric resistant or induction butt welded, mild steel round bar 12 mm dia and below, flats up to 10 mm in thickness, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, factory made glass reinforced plastic door frame 90x45 mm i/c carriage, 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage, powder coated m.s. butt hinges 100 mm x58 mm x 1.9 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 20 mm, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), pvc pipe 110 mm outer dia 6kgf/cm2, pvc pipe 15 mm outer dia 10kgf/cm2, pvc pipe 32 mm outer dia. 10kgf/cm2, pvc pipe 40 mm outer dia. 10kgf/cm2, pvc pipe 63 mm outer dia . 6kgf/cm2, pvc vent cowl 63 mm dia, pvc vent cowl 110 mm dia, brass bib-cock-15 mm dia, pvc elbow 63 mm dia, pvc 45 degree elbow 63 mm dia, pvc door elbow 63 mm dia, pvc bend 63 mm dia, pvc tee 63x63x63 mm dia, pvc socket/coupling 63 mm dia, pvc elbow 110 mm dia, pvc 45 degree elbow 110 mm dia, pvc door elbow 110 mm dia, pvc bend 110 mm dia, pvc tee 110x110x110mm dia, pvc socket/coupling 110 mm dia, pvc pipe 25 mm outer dia . 12 kgf/cm2, vitreous china orrisa type w.c. pan size 580 mm, flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe), 100 mm s.c.i. trap with vent heel, black plastic seat (soild) with lid c.p.brass hinges and rubber buffers, vitreous china pedestal type wate closet, vitreous china flat back wash basin 550x400 mm, 15 mm c.p.brass tap, c.p. brass waste 32 mm, c.i. bracket for wash basin and sinks, stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm, semi rigid pvc waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c pvc waste fittings, polyethylene water storage tank with cover and suitable locking arrangemnet, fine sand (zone iv), vitrified floor tile 60x60 cm, ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., multi surface paint, special primer (c.w), black japan, synthetic enamel paint in black or chocolate shade, mild steel plates, g.i. pipes 40 mm dia, mild steel round bar above 12 mm dia, welding by electric plant, stainless steel (grade - 304) hollow section round/square tubes, stainless steel bolts /square bar and plates

CTN :45623718

29 Jun, 2026 9.68 Lacs

Parganas - West Bengal

Tender For supply of stationary lead acid batteries (with tubular positive plates) in monobloc container (v2) conforming to is 13369 (q3) , lead acid storage batteries for motor vehicles with light weight and high cranking performance (v2) conforming to is 14257 (q3)

State Government

CTN :45623293

13 Jul, 2026 14.24 Lacs

Gautam Budnagar - Uttar Pradesh

Tender For supply of basketball (v2) (q3) , volleyball (v3) conforming to is 417 (q4) , football (v2) conforming to is 417 (part 1) (q3) , take off board (q3) , discus (athletics) (q3) , javelins as per is 4613 (q3) , cricket bat (v2) conforming to is 828 (q3) , shot put - athletics (q3) , marking cones (q3) , speed hurdles (q4) , skipping rope (v2) (q3) , weightlifting equipment bars / plates / collars (v2) (q3) , medicine ball (q3) , measuring tape (v3) (q3) , rubberized weight dumbbells (q3)

Central Government/Public Sector

CTN :45627245

29 Jun, 2026 2.00 Lacs

Aizawl - Mizoram

Tender For supply of stationary valve regulated lead acid batteries (v3) conforming to is 15549 (q3) , stationary lead-acid cells and batteries with plante positive plates conforming to is 1652 (q3) , lead acid storage batteries for motor vehicles with light weight and high cranking performance (v2) conforming to is 14257 (q3)

State Government

CTN :45613922

03 Jul, 2026 3.58 Lacs

Surat - Gujarat

Tender For providing, supplying and installation with testing demo of additional laboratory equipment for aggregate, cement and mix-design at quality control sub division, rander, dist. surat.- providing and supplying & installation with testing demo of vicat needle apparatus for testing of initial, final seeting time & consistency of cement test. one complete set. confirm to 18:5513 , providing and supplying & installation with testing demo off vicat mould, , providing and supplying & installation with testing demo of vicat glass plate, , providing and supplying & installation with testing demo of le-chatler mould including two glass plates and lead weight as per is set of six., , providing and supplying & installation with testing demo of le-chater flack, , installation with testing demo of slump test apparatus with tamping rod 16 mm dia x 600 mm long graduated., , providing and supplying & installation with testing demo of humidity chamber refrigerated-inner 8.8-45x45x45 cm-92 liter for temperature and humidity control with over temperature protection audio alarm system, , providing and supplying & installation with testing demo of servo voltage stabilizer -3kva-single phase for humidity chamber., , providing and supplying & installation with testing demo of humidifire with controler digital-confirming ito indian standard codes, , providing and supplying & installation with testing demo of whatman fliter paper-40 for blain air permeability test apparatus for fineness of cement, confirming to indian standard codes., , providing and supplying & installation with testing demo of precision electronic balance-600 gmm 01 gm (10mg)-confimming to indian standard codes., , providing and supplying & installation with testing demo of cement morter cube mould-7.06 cm-for cement confirming to indian standard codes (18 10080, 84031), , providing and supplying & installation with testing demo of 90 micron is sleve, , providing and supplying & installation with testing demo of gauging travel 8 anch. (200 mm)-confirming indian standard codes., , providing and supplying & installation with testing demo of temperature meter concrete, , providing and supplying & installation with testing demo of room temperature meter or thermo hygrometer, , providing and supplying & installation with testing demo of tds meter pen type, , providing and supplying & installation with testing demo of ph meter - pen type, , providing and supplying & installation with testing demo of measuring cylinder -borosilicate glass-100ml, , providing and supplying & installation with testing demo of measuring cylinder -borosilicate glass-250ml, , providing and supplying & installation with testing demo of measuring cylinder -borosilicate glass-500ml, , providing and supplying & installation with testing demo of measuring cylinder -borosilicate glass-1000ml, , providing and supplying & installation with testing demo of standard weight box-8.8.-1 mg-200 gm-class f1 (with nabl calibration), , providing and supplying & installation with testing demo of buoyancy balance with electronic balance 10 kg x 0.1 gm, , providing and supplying & installation with testing demo of 1.) distance piece-50mm height-nos 2.) distance piece-30mm, , height-inos, , machine, , providing and supplying & installation with testing, , demo of electronic platform, , balance-100 kg-, , 10 gm platform size 600 x, , , , providing and supplying & installation with testing demo of g.j. tray 1000x 1000 x 50 mm confirming to indian standard codes., , providing and supplying & installation with testing demo of bnd- ordinary portland cement standard specific area (blaine) one set surface, , providing and supplying & installation with testing demo of wash bottle 1000ml, , providing and supplying & installation with demo of spatula testing, , providing and supplying & installation with testing demo of fil

Running Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government