Latest runway marking Tenders | Government runway marking Tenders

CTN :40508238

18 Jun, 2025 NA

Kamrup - Assam

Tender For supply of construction material for bty comd post 8.06m x 6.02m x 3.40m as per technical specification and drawings attached , cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112 - 1989 make birla gold or ambuja or ultratech or acc or jk or dalmiya , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , coarse aggregate 40-63 mm graded , stone boulder 9 inch to 12 inch , water proofing compoundconfirming to is 2645-2003 make pidilite or dr.fixit or fevicol , hdpe sand bag og colour of size 15 inch x 30 inch , painting brush 4 inch isi marked , anti corrosive red oxide zinc chromate primer confirming to is 5-2004 make berger or asian or nerolac , synthetic paint enamelled og confirming to is 5-2004 make berger or asian or nerolac , thinner make nerolac or berger or asian , srt 2440 x 613 x 180 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make tata or sail or jsw camouflage pattern , ismb hot rolled ms 200 x 100 3m maketata or sail or jsw , ismb hot rolled ms 200 x 100 4m make tata or sail or jsw , polythene sheet colour less and weight of sheet shall be not less than 70gm per sqm , pbs roll 20m long width of 0.9mtr isi marked with min weight of 34 kgs per roll , prefeb mild steel door of size 900x 1700mm outer frame made out of isa 40x 40x6mm , shuttering and nails wooden planks for shuttering iind class wood of size 3.0 x 0.30 x 0.026m , wooden scantling various size , nails various size , lightning conductor air terminal single pointed aluminium rod 12mm dia and 300mm long. , testing point terminal block make of gun metal and phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mm long hexagonal head screw. , aluminium strips 25x3mm. , galvanised iron strip 32x6mm. , funnel fitted with 20mm dia gi pipe 1.5m long make jindal or tata or kalinga , earthing plate 600x600x6mm gi steel suitable for gi strip fittings drilled with two nos holes for 6 mm dia near one side. , ci earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with ms frame. , insulating pvc block 75x75x30mm with insulating clamp nut and bolt make - presto or polycab or finolex , charcoal , slt , double sleeping bunk complete with plywood matress and all connected accessories all as per technical specification. , study chair of size length 56cm height 82 cm width 56 cm lacqured finish with arm seat and back cushion velvet holestry make supreme or equivalent , study table of size 4x2 wooden top on round tube structture with three drawers unit , steel bed side locker of size 1000mm x 1520mm x 450 mmcomplete with all accessories as per tech spec. , water dispenser of 230 v 500 watts without refrigerator with normal cold and heating capacity of 5 lts per hour , plastic dustbin of capacity 40 ltrs make neelkamal or cello or supreme. , solar system comprising of 1 x 500 watt monocrystaline pv panel 100ah solar bty min 550va ac or dc inverter with inbuilt mppt and charge controller equivalent , portable indoor type high quality kero heater metal body ignites type of continues heating duration min 8 hrs

State Government

CTN :39836802

12 Jun, 2025 16.66 Lacs

Gandhinagar - Gujarat

Tender For corrigendum : the work of anti corrosive epoxy painting on various pipelines, vessals, tanks & structures etc. of ash handing system of ashplant unit 3,4 & 5 of gtps as per scope of work & instruction of eic

Central Government/Public Sector

CTN :40511976

12 Jun, 2025 NA

Chennai - Tamil Nadu

Tender For supply of ladder trolley complete set generally confirming to rdso specification no. tm/sm/465 dated 03.02.2014 (rev 01 of2020) enclosed with following minor deviations. 1. each trolley set comprises of (1) wheel and axle 2 nos. (2) detachable frame- 1 no. and foldable ms ladder-1 no. 2. the wheel and axle set , frame for the trolley and the ladder for the trolley shall be as per the drawing enclosed. 3.the materials especially steel used for fabrication of wheel and axle should confirm to relevant standards wherever appli cable. only isi marked, branded ms pipe should be used for fabrication of ladder. the finished ladder shoul d be given one coat of anti-corrosive painting 4.seating arrangements, any arrangement for tool box are no t required in the trolley though mentioned in the rdso specification. 5. where there is any minor deviation in the dimensions between the drawing and the rdso specification is noticed if any, the dimensions in the enclosed drawing shall be adopted. 6. suitable insulating pad or similar insulating material should be provi ded in the axle such that the two wheels of the axle are not electrically shorted. 7. inspection will be carried out by consignee either at firm's premises or after receipt of the material. tenderers shall specifically note that the trolley requires to be field tested and any minor alterations/modification required for the same sho uld be carried out at the field by firms representatives in co-ordination with consignees after effecting the s upply. encl: 1. rdso specification no.tm/sm/465dt.03.02.2014 (rev 01 of 2020) 2. drawing no. m/trd/sk/ 589. [ warranty period: 30 months after the date of delivery ]

CTN :40373295

30 May, 2025 7.11 Lacs

Bardhaman - West Bengal

Tender For corrigendum : anti-corrosive painting of head gear structures of four pits (pit no. 3, 4, 7 and 8) of nimcha (r) colliery under satgram-sripur area

State Government

CTN :40005496

03 Jun, 2025 23.74 Lacs

Bhavnagar - Gujarat

Tender For corrigendum : work of anti-corrosive epoxy painting on various locations of lignite handling system at bltps on as & when required basis.

CTN :40135905

23 May, 2025 NA

Tawang - Arunachal Pradesh

Tender For bid to ras supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112-1989 make-birla gold,ambuja,ultratech, acc,jk or dalmia under job no 2504 ags pd as per store list att , stone boulder 9 inch to 12 inch , coarse aggregate 40 to 63mm , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40mm graded , mild steel bar of size 6 to 8 mm dia conforming to is 432 part i 1982 make- tata,sail,jsw , water proofing compund conforming to is 2645-2003 make- pidilite,dr fixit,fevicol , quick setting compound make- pidiite,quick fix,fevicol , pbs roll 20m long , width of 0.9mtr isi marked with min weight of 34 kgs oblique roll , gi binding wire tata,sail,jsw , cement based paint snowcem make-berger,asian,nerolac , slack lime , painting brush 4 inch isi marked , hdpe sand bags khaki colour of size 30inch x 15inch inside laminated interlocking stiched, weight of the each bag should not be less then 42-45 gms oblique bag , anti corrosive red oxide zinc chromate primer conforming to is-5-2004 make-asian,berger,neroloc , synthetic paint enamelled og conforming to is 5-2004 make- asian,berger,nerolac , thinner make-nerolac,berger,asian , srt 2440 x 613 x 180 , 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make- tata, sail,jsw , ismb hot rolled 200x100mm and 4 mtr long make-tata,sail,jsw , prefeb mild steel door of size 750x 1800mm double shutter, outer frame made out of isa 40x 40x6mm and door shutter frame of make-tata,sail,jsw as per store list , mild steel bar of size 6 to 8 mm dia conforming to is 432 part i 1982 make-tata,sail,jsw , loop holes 780 x 300 mm make-tata, sail,jsw , loop holes 1000 x 300 mm make-tata, sail,jsw , loop holes 1250 x 300 mm make-tata, sail,jsw , ventilator steel 600x450 mm will be fabricated using isa 35x35x6mm for outer frame and isa 30x30x3mm make-tata, sail,jsw as per store list , wooden planks for shuttering iind class wood of size 3.0 x 0.30 x 0.026m , wooden scantling various size , nails various size , air terminal single pointed aluminium rod 12mm dia and 300mm long , testing point terminal block make of gun metal and phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mmas per store list , aluminium strips 25x3mm. , galvanised iron strip 32x6mm. , funnel fitted with 20mm dia gi pipe 1.5m long make-jindal, tata, kalinga , earthing plate 600x600x6mm gi steel suitable for gi strip fittings, drilled with two nos holes for 6 mm dia near one side , ci earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with ms frame , insulating pvc block 75x75x30mm with insulating clamp nut and bolt make- presto,polycab, finolex , charcoal , salt bid details/ 2 / 34

CTN :40327889

26 May, 2025 7.11 Lacs

Multi City - Multi State

Tender For anti-corrosive painting of head gear structures of four pits(pit no. 3, 4, 7 & 8) of nimcha (r) colliery under satgram-sripur area.

Central Government/Public Sector

CTN :40324844

04 Jun, 2025 81.70 Lacs

Bareilly - Uttar Pradesh

Tender For shifting of runway 28 threshold, provision of turn pad, development of resa (90x60 meter), painting of runway markings and allied electrical works at pantnagar airport

Runway Marking Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector