Latest sacrificial anode Tenders | Government sacrificial anode Tenders

CTN :45048307

31 Jul, 2026 NA

Tarapur - Maharashtra

Tender For corrigendum : : supply, installation, testing & commissioning of electrical equipment for dg block 119a of inrp - ht panels (119a)supply, installation, testing & commissioning of indoor type floor mounted, single front, metal clad, 1250 a, 6.6 kv, 3 phase, 3 wire, vcb switchgear panel suitable for a short circuit current of 31.5 ka for 3 seconds, internally arc tested for 31.5 ka for 1 second, comprising of following incoming & outgoing feeders : incoming feeder: 1 no. 1250 a, 3p vcb outgoing feeders: i) 7 nos. 630 a, 3p vcbii) 1 no. 1250 a, 3p vcb as tie feederwith surge arrestors, relays, pts, cts & other necessary accessories including associated structural steel required for complete installation of the panel & equipment earthing of the panel from both the earthing terminals of the panel to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings. reference drg. nos: ip1/119a/05027339/dwg/001/r0 & ip1/119a/05027339/dwg/002/r0(note: terminal box of each incomer of 6.6kv switchboard shall be suitable for terminating 4x3cx400 sq.mm., 6.35/11kv (e), a2xwy cables.), supply of spares for ht panels as per attached spares list mentiond in section c, part ii of tender, 2.5 mva, 6.6/0.433 kv dry type transformers (119a)supply, installation, testing & commissioning of 6.6/0.433 kv, 2.5 mva, dyn11 dry type cast resin transformer having percentage impedance of 8.5% complete with ht cable end box, lt bus duct flange, off load tap changer on ht side with range of +/-5% in steps of 2.5%, wti scanner, ct for restricted earth fault protection and other necessary accessories including associated structural steel required for complete installation of the transformer & equipment & neutral earthing of the transformer from both the earthing terminals of the transformer to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings.reference drg. no. : ip1/119a/05034347/dwg/001/r0, supply of spares for dry type transformers as per attached spares list mentiond in section c, part ii of tender, 2000 kva diesel generator sets (119a)supply, installation, testing & commissioning of 3 phase 2000 kva prime power 433v, 50hz, 0.8 p.f. diesel-generator sets with 110% overload capacity for 1 hr with four (4) stroke inline or vee type cylinder arrangement having engine speed 1500 rpm, 24v electric battery starting system with a provision of interchangeability of battery bank between two dg sets, complete with all auxiliary equipment including amf control panel, auxiliary mcc panels, heat exchanger cooling system, raw water pump, remote radiator with fans on terrace, ms exhaust piping, exhaust structure (maximum 30 m stack), 4 nos. of 3.6 cubic metre fuel day tank outside dg building (for all 4 dg sets) & 1 no. of 990 ltr intermittent tank inside each dg room, ms "c" class fuel piping between engine & fuel tank, dg room accoustic treatment & complete ventilation of dg room, brushless excitation for alternator, one no. 3200 amp 415 v 4p acb, ms structural steel supports/ channels/ angles & other necessary accessories including associated structural steel required for complete installation of the dg & equipment & neutral earthing of the dg from both the earthing terminals of the dg to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & necessary statutory clearances from cpcb etc. as required and as per tender technical specifications & drawings. design and construction of foundation for exhaust pipe rack/ structure of dg set is included in the scope of the contractor.reference drg. nos. : i) ip1/119a/05034347/dwg/001/r0ii) ip1/119a/05044831/dwg/003/r0iii) ip1/119a/05044831/dwg/004/r0iv) ip1/119a/05044831/dwg/005/r0v) ip1/119a/05044831/dwg/006/r0, supply of sp

Central Government/Public Sector

CTN :45618391

29 Jun, 2026 NA

Ernakulam - Kerala

Tender For supply of aluminium alloy sacrificial anode net weight 4.0 kg , aluminium alloy sacrificial anode net weight 6.0 kg , aluminium alloy sacrificial anode net weight 12.5 kg , aluminium alloy sacrificial anode net weight 4.3 kg , aluminium alloy sacrificial anode net weight 0.2 kg

CTN :45260032

17 Jun, 2026 NA

Sagar - Madhya Pradesh

Tender For corrigendum : supply of sacrificial anode, w/stud, zinc, 50x450mm

Central Government/Public Sector

CTN :45465526

23 Jun, 2026 1.90 Lacs

Dhanbad - Jharkhand

Tender For repairing, testing servicing and of national resistors make 11 kv, 10 amp restricted neutral grounding system sl no. 1434, for tr-4, 33/11 kv at ramkanali substation, katras area

CTN :45084841

09 Jun, 2026 NA

Kolkata - West Bengal

Tender For corrigendum : supply of sacrificial anode for mpv project grse yard nos 3050 to 3057 c c - aluminium anodes -3.7 kg each - 3050 , stainless steel securing arrangmnt_3.7kg - 3050 , shop test report,ins cert and co-related mtc - 3050 , aluminium anodes -3.7 kg each - 3051 , stainless steel securing arrangmnt_3.7kg - 3051 , shop test report,ins cert and co-related mtc - 3051 , aluminium anodes -3.7 kg each - 3052 , stainless steel securing arrangmnt_3.7kg - 3052 , shop test report,ins cert and co-related mtc - 3052 , aluminium anodes -3.7 kg each - 3053 , stainless steel securing arrangmnt_3.7kg - 3053 , shop test report,ins cert and co-related mtc - 3053 , aluminium anodes -3.7 kg each - 3054 , stainless steel securing arrangmnt_3.7kg - 3054 , shop test report,ins cert and co-related mtc - 3054 , aluminium anodes -3.7 kg each - 3055 , stainless steel securing arrangmnt_3.7kg - 3055 , shop test report,ins cert and co-related mtc - 3055 , aluminium anodes -3.7 kg each - 3056 , stainless steel securing arrangmnt_3.7kg - 3056 , shop test report,ins cert and co-related mtc - 3056 , aluminium anodes -3.7 kg each - 3057 , stainless steel securing arrangmnt_3.7kg - 3057 , shop test report,ins cert and co-related mtc - 3057

Central Government / Public Sector

CTN :45213933

05 Jun, 2026 NA

Jagatsinghapur - Odisha

Tender For corrigendum : tender for supply of sacrificial anodes -item 10 of rfq , item 20 of rfq , item 30 of rfq , item 40 of rfq , item 50 of rfq , item 60 of rfq , item 70 of rfq , item 80 of rfq , item 90 of rfq , item 100 of rfq , item 110 of rfq

CTN :44633686

15 May, 2026 NA

Mumbai - Maharashtra

Tender For bid to ras supply of 25b53c002 indium free aluminium alloy anode mk -ii (nsn5342-720484365) , 25b53c002 indium free aluminium alloy anode mk -i (nsn5342-720484367) , 25b53c002 indium free aluminium alloy anode mk -iv (nsn5342-720484368) , 25b53c002 indium free aluminium alloy anode mk -v (nsn5342-720484370) , 25b53c002 indium free aluminium alloy anode mk -vi (nsn5342-720484372) , 25b53c002 indium free aluminium alloy anode mk ix (nsn5342-720484375) , 25b53c002 mn activated low potential al alloy anodes poka-5 (nsn5342-720484377) , 25b53c002 indium free aluminium alloy anode mk -xi (nsn5342- 720484379) , 25b53c002 indium free aluminium alloy anode mk -x (nsn5342-720484380) , 25b53c002 indium free aluminium alloy anode mk -viii (nsn5342- 720484383) , 25b53c002 mn activated low potential al alloy anodes poka-3 (nsn5342-720484384) , 25b53c002 zinc sacrificial anode type 4z (nsn5342- 720471965) , 25b53c002 indium free aluminium alloy anode mk -iii (nsn5342-720484364)

Central Government And Public Sector

CTN :45072443

25 May, 2026 NA

Kudankulam - Tamil Nadu

Tender For supply of spares for sea water self cleaning filter d d - boll filter make filter type 6.18 dn 50 filter wedge wire candle s10057x800 part no 1340318 , boll filter make filter type 6.18 dn 50 filter bearing bush 6.18, 6.19 dn50 part no 5370512 , boll filter make filter type 6.18 dn 50 filter flushing arm 6.18 dn50model 40508 part no 5710508 , boll filter make filter type 6.18 dn 50 filter truarc inverted ring partno 3542526 , boll filter make filter type 6.18 dn 50 filter covering plate 6.18 dn50-300 part no 5760001 , boll filter make filter type 6.18 dn 50 filter flushing bushing 6.18 dn50-300 part no 5360023 replace id 5360003 , boll filter make filter type 6.18 dn 50 filter sacrificial anode 6.18, 6.19 gr.11 part no 5060058 , boll filter make filter type 6.18 dn 50 filter connecting shaft 6.18 dn50 part no 6010513 , boll filter make filter type, 6.18 dn 150 wedge wire candle s50029x400 radial spalt part no 1340167 , boll filter make filter type, 6.18 dn 150 bearing bush 6.18, 6.19 dn100-300 part no 5376182 , boll filter make filter type, 6.18 dn 150 covering arm 6.17 dn150part no 5376182 , boll filter make filter type, 6.18 dn 150 truarc inverted ring v-75apart no 3542192 , boll filter make filter type, 6.18 dn 150covering plate 6.18 dn50-300 part no 5760001 , boll filter make filter type, 6.18 dn 150 flushing bushing 6.18 dn50-300 part no 5360023 , boll filter make filter type, 6.18 dn 150 sacrificial anode part no5000191 , boll filter make filter type, 6.18 dn 150 connecting shaft nr.2 partno 6811631 , boll filter make filter type, 6.18 dn 150 covering plate 6.18 dn50-300 part no 5760001 , boll filter make filter type, 6.18 dn 100 wedge wire candle s50029x400 radialspalt part no 1340167 , boll filter make filter type, 6.18 dn 100 bearing bush 6.18, 6.19dn100-300 part no 5376182 , boll filter make filter type, 6.18 dn 100 flushing arm 6.18 dn100part no 5741810 , boll filter make filter type, 6.18 dn 100 truarc inverted ring v-75apart no 3542192 , boll filter make filter type, 6.18 dn 100 flushing bushing 6.18dn50-300 part no 5360023 , boll filter make filter type, 6.18 dn 100 sacrificial anode 6.18, 6.19part no 5000187 , boll filter make filter type, 6.18 dn 100 connecting pipe 6.19 dn100-300 part no 5716192 , boll filter make filter type, 6.18 dn 100 flushing arm 6.19 dn 100part no 5741910

CTN :45044966

21 May, 2026 NA

Mumbai - Maharashtra

Tender For supply of 46014b03750d o-ring 5330bb 37 5x2 65-20a8 , e25514a80hyaps washer z8u z2cnd17-12 pass , 46014a00800 o-ring 8 00x1 80 20a8 an , 46014c04500 o-ring 45x3 55-20a8 , 46014c11200 o ring 112x3 55- 20a8 , 5330ca-bsc20-20a8 gasket bs c20 20a8 aviation , 46014d17000 o-ring 170 00x5 30 20a8 an , nl-18 ss sertec washer de 18 stainless steel , 46014b02240 o ring 22 40x2 65-20a8 , 46014b03150 o ring 31 50x2 65 20a8 an , 46014c07100 o-ring 5330bb 71x3 55-20a8 , ej70061010e hydrauxim 17 15 tap with m30x2 threaded ends , jf4-41-9pd31 gasket jf4 76 74x89 4x5 33 , stf 33-07-02 019e41 50x3 00-20a8-bn o-ring 41 50x3 00 20a8 , 46014a01600 o-ring 16 00 x 1 8-20a8 an , 46014c06000 o-ring 60 00 x33 5 20a8 an , 46014d08000 o-ring 5330bb 80x5 3-20a8 , t47501eaa00515adnl o-ring 20a8 5 15x1 8 , t47501edd05800adnl o-ring 20a8 58x5 3 , wb699g14859acnl o ring 148 59x6 99 20a7 , wb699g15177acnl o-ring 20a7 151 77x6 99 , stf 33-07- 02 019e-37 47x5 33-20a8-bn o-ring 37 47x5 33 20a8 gn , wb699g17717acnl o-ring 20a7 177 17x6 99 , 488802 hoisting return flexible hose l 547 , 488803 hoisting return flexible hose l 360 , 488804 flexible hose , 23201am0060t external retaining ring 6x0 7e22163 , 23201am0120t external locking ring 7100- 12xc75park , d23490 spring , e27489e20-25axtt spring pin e2x25xc90 ph , 489793 bague tournante suivant plan ruelle , e25513b40ura aluminium bronze washer m 4 u , jf4-7-9pd31 ring jf4 number 7 , wb533g07239acnl o-ring 72 39x5 33 20a7 , 46014e24300 o-ring 243x7 20a8 , e27489e40-30axtt spring pin e4x30xc , jf4-18-9pd31 gasket jf4 23 39x30 45x3 53 , gsm128-002f5de25t1et2 copper ribbed seal 335x45x3 , wb180g09300adnl o-ring 93x1 8 20a8 , wb533g09464acnl o-ring 20a7 94 64x5 33 , wb700g18352acnl o-ring 20a7 183 52x7 , wb699g12319acnl o-ring 20a7123 19x6 99 , wb700g21527acnl o-ring 20a7 215 27x7 , stf 33-07-02 019e-66 04x5 33-20a8-bn o-ring 66 04x5 33 20a8 , wb533g06604adnl o-ring 66 04x5 33 20a8 gn , re16ms2 seal re16ms2 jupiter , e22307a1300hyt lock washer de 130 , gp6901000-t51 guiding ring , wb699g20257acnl o-ring 20a7 202 57x6 99 , stf33-02- r003-dn12-acier nord-lock wash 12 , jt 25 00x2 50- 20a8-an joint torique 25 00x2 50 20a8 classe a-n , stf 33-07-02 019e-75 80x3 53-20a8-bn o-ring 75 80x3 53 20a8 , stf 33-07-02 01e-48 70x3 55-20a8-an o-ring 48 7x3 55 20a8 , stf33-02-r004e-dn16inox lock washer nd16 , stf33-07-02 019e-25 00x2 65-20a8-an o-ring 25x2 65 20a8 an , stf 23-03-01e-1z sacrificial anode 1z , stf 33-07-02 019e-177 17x6 99-20a8-bn o-ring 177 17x6 99 20a8 , 472018 washer , stf 33-07-02 019e-47 34x1 78-20a8-bn o-ring 47 34x1 78 20a8 , jt 9 00x1 80- 20a8 o-ring 9 00x1 8 20a8 an , stf33-07-02 019e-8 90x1 90-20a8-bn o-ring 8 9x1 9-20a8 , stf 33-07-02 019e-33 50x2 65-20a8-an o-ring dia 33 5x2 65 , stf33-07-02 021e-8 2x12x1 copper ring gasket 8 2x12x1 , 46014c07500 o-ring 75 00x3 55 20a8 an , stf33-07-02 019e-12 50x1 80-20a8-an o-ring 12 50x1 80 20a8 an , stf33-07-02 019e-21 30x3 60-20a8-bn o ring 21 30x3 60 20a8-gn , stf33-02 r004edn16inox stainless steel lock tab washer dn16 , stf33-02 r003e dn16 inox nord-lock washer nd16 , stf33-07-02 019e-35 60x3 60- 20a8-bn o-ring 35 60x3 60 20a8 , stf 33-07-02 019e- //bid details 2 / 89 1400x1 80-20a8-an o ring 14x1 8 20a8 , jt 47 50x2 65- 20a8-an o-ring 5330bb 47 50x2 65-20a8-an , 4180826 sealing washer 30x18x1 teflon , stf 33-07-02 019e-16 0x2 65-20a8-an o-ring 16 00x2 65 20a8 an , stf 33-07- 02 019e-53 00x3 55-20a8-an o-ring 53 00x3 55-20a8 an , stf33-0-02 019e-67 00x3 55-20a8-an o-ring 67 00x3 55 20a8 an , t47501eee258000adnl o-ring 258x7 20a8 , stf 33-07-02 019e-24 20x3 00-20ab-bn o-ring 24 20x3 00 20a8 , 6x40 mcp spirol pin 6x40 mcp , 469735 tuyau de raccordement ar , ci2560 ressort compress ci2560inox , bsa6pc851inox gasket bs a6 pc851 stainless steel , wb700g12002acnl o-ring 20a7 120 02x7 , t47501dee25400adnl o ring 254x7 , stf33-07-02 021e-10 2x15x1 ring gasket 10x15x1 copper21,2x27x2cuivre circular copper seal 21.2x27x2, 300-313-2261-41 packing with retainer, wb353g02974acnl o-

Central Government And Public Sector

CTN :44958919

02 May, 2026 NA

Thane - Maharashtra

Tender For supply of set of ball extraction funnel plates , set of ball extraction pipes , set of rim sheet cut to ball separator screen profile , set of internal fasteners for screen with moc- super duplex steel , sacrificial anode with anode fixing plate

Sacrificial Anode Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government And Public Sector

Central Government And Public Sector