Latest saddle clamp Tenders | Government saddle clamp Tenders

CTN :45326025

02 Jun, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot non ferrous scrap - lot no. p.nfa-1.bin no- 1/a & 1 exmp.05.2026-27.02 descroption - scrap alluminium with iron attachment, and other alluminium casting, field coil, lamp caps, alluminium boring etc. our offer: a) scrap alluminium with or without iron attachment. such as- scrap aluminium from main compressor, aluminium socket 4 sqmm, aluminium in line connector, cylinder for tap changer, aluminium number plate, aluminium feeder wire, steady arm, anti wind clamp, aluminium gravity cock, pulley groove, feeder ending clamp, bus bar splice,roller housing for t/c, electro valve support, servo motor, cover for wheel set earthing equipment and other aluminium miscellaneous as in the lot which are kept in bin no-1/a . qty= 2784 kgs. b) scrap alluminium rear & front cover with or without rubber and grease attachment. in bin no- 1 . qty- 1830 kgs. loading will be done by purchaser own arrangement.

Central Government / Public Sector

CTN :45335473

12 Jun, 2026 NA

Karimnagar - Telangana

Tender For supply of standard anti wind clamp 2550-2 used for bfb steady arm (identification no 2390)conforming to specification ti/spc/ohe/fittings/0130 with a_c_slip_no_1 and as per rdso drg no.eti/ohe/p/2550-1/2.mod l or latest. make/brand: rdso approved vendors accepted only [ warranty period: 30 months after the date of delivery ] ]

CTN :45329993

09 Jun, 2026 373

Mandya - Karnataka

Tender For procurement of water suply items for the year of 2026-27 kothathi - pvc fiber 1.1/2pipe 10feet hand borewell, copper wire 2.5mm 90mtr, copper wire 1.5mm 90mtr, cable clamp, motor pump 6hp x 8 stg, winding wire 1.3 mm copper, winding wire 1.1 mm copper, winding wire 1 mm copper, pump 12stg, pump 8stg, motor repair charges 6 hp, motor repair charges 7.5hp, cable 3core 4 sq mm, cable 3core 2.5 sq mm, mn2 realy(14-23), auto.switch, preventer 7.5hp to 15hp, preventer upto 7.5hp, no push button, terminal block, r,y,b indicater lamp, volts.meter, amps.meter, start no push button, stop nc push button, overload realay, wiring.charges, motor repair.charges, start repair charges, lathe work fitting.charges, pump repair charges, motor lifting and eraction.charges, suction case set nbr, non slam check valve, pump shaft, teflon plate, couple, suction plate, bush(rubber+ stainlesss steel), suction, ss counter, setting sleeve, middle, bush seal, bush seal cover, impeller, diffuser, bowl, bowl bush, key, step sleeve, washer., hexbolt, square nut, patti (motor&pump), adaptor (motor&pump), pump nrv, stud, nut, safety valve, brackets, motor pipe, lamination, stator stack, body sleeve, motor shaft, rotor stack, copper lamination, pressure ring, balance ring, rotor assembly, upper.housing, grommet, connection piece, oil seal cover, oil seal rubbar, water bolt, sand guard, v-notch rubber, couple key, couple sleeve, stud ring, lock ring, bush, carbon bush, lower.housing, allen bolt, thrust bearing.plate, circlip lock, base, rocker support, rocker support nut, thrust bearing, thrust bearing segment, til-ting pad(trust pad), pcd cup, pcd plate, drain plug, stainer, cable.guard, winding wire 1.2 mm copper, boltnut 3/8, boltnut 5/8, insulation.tape, rewireable fuse 250 amps 415v, rewireable fuse 100 amps 415v, rewireable fuse 63 amps 415v, sada pannel board7.5hp to 15hp, d.o.l pannel board- 7.5hp to 15hp, sada pannel board 7.5 hp, d.o.l pannel board- 7.5 hp, hp7.5 x 12 stg pump, hp6 x 12 stg pump, hp10 x 12 stg pump, hp10 x 12 stg motor pump, hp7.5 x 12 stg motor pump, hp6 x 12 stg motor pump, plunger rod for hand pump borewell, bore hole casing for hand pump borewell, compression cone for hand pump borewell, riser pipe, bore well handle, cylinder for hand pump borewell, axcel for hand pump borewell, bearing for hand pump borewell, water tank for hand pump borewell, pedstail stand for hand pump borewell, nut & bolt for hand pump borewell, head for hand pump borewell, chain nut & bolt for hand pump borewell, baket washer for hand pump borewell, gi 1.25 inch copler/coller 32mm for hand pump borewell, connecting rod for hand pump borewell, gi 1.25 inch pipe for hand pump borewell, pvc tape roll, mrf tape, shalk threas, pvc 6inch cassing pipe, pvc 4.5inch cassing pipe, pvc 7inch cassing pipe, gi 6inch cassing pipe, gi 7inch cassing pipe, hacksaw blades 12x1/2x24t, garden pipe 1inch, garden pipe 3/4inch, lather nrv, electrofusion welding machine ef, hdpe 1.1/2inch pipe, hdpe 1.1/4inch pipe, hdpe 110mm pipe, hdpe 90mm pipe, hdpe 75mm pipe, hdpe 63mm pipe, hdpe(electrofusin fittings) 110mm tapping tee(belt type), hdpe(electrofusin fittings)110mm tapping tee (clamp type), hdpe(electrofusin fittings) 110mm end cap, hdpe(electrofusin fittings) 110mm reducer, hdpe(electrofusin fittings) 110mm equal tee, hdpe(electrofusin fittings) 110mm elbow 45, hdpe(electrofusin fittings)110mm elbow 90, hdpe(electrofusin fittings) 110mm copler/coller, hdpe(electrofusin fittings) 90mm tapping tee(belt type), hdpe(electrofusin fittings) 90mm tapping tee (clamp type), hdpe(electrofusin fittings) 90mm branch saddle(belt type), hdpe(electrofusin fittings) 90mm branch saddle(clamp type), hdpe(electrofusin fittings) 90mm end cap, hdpe(electrofusin fittings) 90mm reducer, hdpe(electrofusin fittings) 90mm equal tee, hdpe(electrofusin fittings) 90mm elbow 45, hdpe(electrofusin fittings) 90mm elbow 90, hdpe(electrofusin fittings) 90mm copler/coller, hdpe(electrofusin fitting

State Government

CTN :45293777

29 May, 2026 3.54 Lacs

Multi City - Telangana

Tender For procurement of tools and equipment for lascars/helpers towards operation and maintenance activities for irrigation sub division no.1, nizamsagar - supply and transportation of 1 hp single phase self priming mono block ip44 motor pumpset. makes: texmo / cri / ksb / aryenvarsha / lubi / falcon , supply and transportation of 5 hp three phase mono block ip44 motor pumpset. makes: flowell / waterman/ ellen / narayani / sai varsha / sterling / duke / samudra / ajantha , supply of 13 mm fibra fiberglass measuring tape - 30m/100ft with unbreakable abs case, durable curved mechanism handle & steel end hooks, make: freeman as directed by engineer-in charge , supply of 2.00 hp four stroke straight shaft brush grass cutters with 2-teeth blade (14 inches) for cutting, which is 360° inclinable. ideal for tough, sloping, and rugged terrains. make:-honda, agriplus, neptune, green leaf as , supply of 4 sq.mm 3 core pvc / xlpe insulated sheathed multi core bright annealed bare copper conductor heavy duty industrial cables for voltage grade upto 1100 volts as per is: 694:2010 including all transportation charges etc complete. , supply of axe with wooden handle as directed by engineer-in charge , supply of chain saw 22"(petrol) for tree cutting with 58cc powered as directed by engineer-in charge , supply of chains for chain saw machine as directed by engineer in charge , supply of electric shock proof hand gloves as directed by engineer-in-charge , supply of gumboots with steel toe isi mark for men as directed by engineer-in-charge , supply of hammer as directed by engineer-in-charge , supply of hand saw with wooden handle(iron prunning curved saw) for grass, wood, tress cutting as directed by engineer-in charge , supply of heavy duty steel tiller pitchfork with handle as directed by engineer-in-charge , supply of hoe tool (favda) for digging heavy duty as directed by engineer-in-charge , supply of iron digging bar/crow bars as directed by engineer-in charge , supply of nylon rope of 20mm diameter 60 mts in length as directed by engineer-in-charge , supply of plastic multipurpose gamelas (43.8 cm x 39.2 cm x 13.2 cm) as directed by engineer-in charge , supply of rechargeable aluminium body led torch with 120-volt ac/dc charger long range as directed by engineer-in charge , supply of saddle / clamps suitable for fixing 4 to 10 sqmm 2 core cable. , supply of safety helmet hard hat steeplejack climbing work construction worker adjustable headband 2 side venting design cushioning as directed by engineer-in-charge , supply of sickle with wooden handle for weed cutting as directed by engineer-in charge , supply of sluice operating handles as directed by engineer-in-charge , supply of taparia combination spanner set css25 (25 pieces) as directed by engineer-in charge , supply of tool box & screw driver kit as directed by engineer-in-charge , supply of waterproof standard length, high quality polyester fabric double coating reversible rain coat with hood & inner mobile pocket. set of top and bottom as directed by engineer-in charge

CTN :45142257

30 May, 2026 15.00 Lacs

Rewa - Madhya Pradesh

Tender For supply of jalpradya and pipe line material nagar prishad hanumana -isi gi pipes (surya/swastik/tata) – 2 star rating: 50mm, 63mm, 75mm, 90mm, 100mm | isi gi sockets – 2 star rating: 50mm, 63mm, 75mm, 90mm, 100mm | isi gi unions – 2 star rating: 50mm, 63mm, 75mm, 90mm, 100mm | isi gi tees – 2 star rating: 50mm, 63mm, 75mm, 90mm, 100mm | isi gi elbows – 2 star rating: 50mm, 63mm, 75mm, 90mm, 100mm | isi gi bends – 2 star rating: 50mm, 63mm, 75mm, 90mm, 100mm | isi gi nipples – 2 star rating: 50mm, 63mm, 75mm, 90mm, 100mm | isi gi reducer sockets – 2 star rating: 50mm, 63mm, 75mm, 90mm, 100mm | isi gi reducer elbows – 2 star rating: 50mm, 63mm, 75mm, 90mm, 100mm | isi gi reducer tees – 2 star rating: 50mm, 63mm 75mm, 90mm, 100mm flanges (2-hole pattern); 50mm, 63mm, 75mm, 90mm, 100mm pvc pipes (10 kg/cm² pressure rating); 3", 4", 6" c.i. bends; 3", 4", 6" c.i. reducer sockets; 3", 4", 6" c.i. reducer tees; 3", 4", 6" c.i. reducer bends; 3", 4", 6" c.i. air valves; 2", 3", 4", 6" c.i. non-return valves; gland packing cord, white lead (safeda), molten lead, jointing compound; heavy-duty plastic taps (1/2"); heavy-duty steel taps (1/2"); rubber rings (3", 4", 6", 8"); nuts & bolts (tvs company, all sizes); pvc tees (2", 2.5", 3", 4", 6"); pvc elbows (2", 2.5", 3", 4", 6"); pvc sockets (2", 2.5", 3", 4", 6"); pvc bends (2", 2.5", 3", 4", 6"); pvc reducer sockets (2", 2.5", 3", 4", 6"); pvc reducer tees (2", 2.5", 3", 4", 6"); pvc reducer bends (2"). 2.5, 3, 4, 6; clamps: 1-1/4, 1-1/2, 2, 2.5, 3, 4, 6; spindle rod (repair): 2, 2.5, 3, 4, 6; spindle rod with nut: 2, 2.5, 3, 4, 6, 8"; pipe wrench (taparia): 10, 12, 14, 18, 24; chain wrench (taparia): no. 36; spanner set (taparia): 4, 6, 8, 10, 12; t-wrench set (taparia); rubber packing; raw rubber; gate valve (isi brass): 1/2, 3/4, 1, 1.5, 2, 2.5, 3, 4; gate valve (c.i.): 1/2, 3/4, 1, 1.5, 2, 2.5, 3, 4; c.i. joint: 3, 4, 6, 8; c.i. sluice valve: 3, 4, 6, 8; c.i. tailpiece: 3, 4, 6, 8; c.i. bend (90 degrees): 3, 4, 6, 8; submersible pump (isi marked): 1 hp kirloskar/crompton (8-stage, 12-stage, 16-stage, 18-stage, 20-stage); 1.5 hp kirloskar/crompton (8-stage, 12-stage, 16-stage). stages: 18, 20 | 2 hp kirloskar/crompton | stages: 8, 12, 16, 18, 20 | 3 hp kirloskar/crompton (t6/t4) | stages: 12, 16, 18, 20 | 5 hp kirloskar/crompton (t6/t4) | stages: 8, 12, 16, 18, 20 | 6 hp kirloskar/crompton (t6/t4) | stages: 8, 12, 16, 18, 20 | 7.5 hp kirloskar/crompton (t6/t4) | stages: 8, 12, 16, 18, 20 | 10 hp kirloskar/crompton | stages: 8, 12, 16, 18, 20 | 15 hp kirloskar/crompton | stages: 8, 12, 16, 18, 20 | ltl panel board: 1 hp, 2 hp, 3 hp, 5 hp, 7.5 hp, 10 hp, 15 hp, 20 hp bch starter ltl (1 hp, 2 hp, 3 hp, 5 hp, 7.5 hp, 10 hp, 15 hp, 20 hp); starter oil; sluice valve (2.5 inches, 3 inches, 4 inches, 6 inches, 8 inches, 10 inches); rubber packing; voltage meter (bch company: 1 hp, 2 hp, 3 hp, 5 hp, 7.5 hp, 10 hp, 15 hp, 20 hp); ammeter (bch company: 1 hp, 2 hp, 3 hp, 5 hp, 7.5 hp, 10 hp, 15 hp, 20 hp); c.i. d-joint (3", 4", 6", 8", 10"); heavy-duty chain pulley (5 ton); main switch ltl (3 hp, 5 hp, 7.5 hp, 10 hp, 15 hp, 20 hp); pvc. pipe wrap (tape) 1", 3/4"; elbows; couplers (sockets) for motor connection 1", 3/4"; vice (thin type) including nuts and bolts; rope 6mm, 8mm; saddle clamps for pipe connections: 315mm, 280mm, 250mm, 225mm, 200mm, 180mm, 160mm, 140mm, 125mm, 110mm; mdpe pipe 1/2"; ferrule 1/2"; nuts & bolts (size 13); tvs clamps 3", 4", 6", 8"; grinder machine; t-wrench 24x27; cutter machine; hammer drill machine; hammer; chisel; axe; hdpe pipe: 110mm, 125mm, 140mm, 160mm, 180mm, 200mm, 225mm, 250mm, 280mm, 315mm; hdpe tee: 110mm, 125mm, 140mm, 160mm, 180mm, 200mm, 225mm, 250mm, 280mm, 315mm; hdpe coupler (joint): 110mm, 125mm, 140mm, 160mm, 180mm, 200mm, 225mm, 250mm, 280mm, 315mm. reducers: 280/250 mm, 250/225 mm, 225/200 mm, 200/180 mm, 180/160 mm, 160/140 mm, 140/125 mm, 125/110 mm; bands: 110 mm, 125 mm, 140 mm, 160 mm, 180 mm, 200 mm, 225 mm, 250 mm, 280 mm, 315 mm;

CTN :45144252

26 May, 2026 10.00 Lacs

Shahdol - Madhya Pradesh

Tender For annual tender of supply of water supply materials - water supply material, g.i pipe 1 inch, g.i pipe 2.inch, g.i pipe 3 inch, g.i socket 1 inch, g.i socket 1.25 inch long, g.i socket 2.inch, g.i socket 2.inch long, g.i socket 3 inch, g.i elbow 1 inch, g.i elbow 1.25 inch, g.i elbow 2.inch, g.i elbow 3 inch, g.i tee 1 inch, g.i tee 1.25 inch, g.i tee 2.inch, g.i tee 3 inch, hdpe pipe 1 inch, hdpe pipe 1.25 inch, hdpe pipe 2 inch, hdpe pipe 3 inch, hdpe nipple 1 inch, hdpe nipple 1.25 inch, hdpe nipple 2 inch, hdpe nipple 3 inch, hdpe equle tee 1 inch, hdpe equle tee 1.25 inch, hdpe equle tee 2 inch, hdpe equle tee 3 inch, hdpe elbow 1 inch, hdpe elbow 1.25 inch, hdpe elbow 2 inch, hdpe elbow 3 inch, hdpe bend 1 inch, hdpe bend 1.25 inch, hdpe bend 2 inch, hdpe bend 3 inch, s.s. clamp with nut bolt, 2 inches, a.c. pipe 4 inches, washer no. 2 and 3, brass elbow 1/2 inch, brass elbow 1 inch, brass elbow 3/4 inch, raw rubber, cable 2.5 mm and 6 mm (national/kisan/texmo), connection cable 4 mm / armored - isi, connection cable 6 mm / armored - isi, pvc saddle clamp set for pipe connection 1 inch, pvc saddle clamp set for pipe connection 1.25 inch, pvc saddle clamp set for pipe connection 2 inch, pvc saddle clamp set for pipe connection 3 inch, ms saddle clamp set for pipe connection 1 inch, ms saddle clamp set for pipe connection 1.25 inch, ms saddle clamp set for pipe connection 2 inch, ms saddle clamp set for pipe connection 3 inch, hose clamp s.s. 1 inch, hose clamp s.s. 1.25 inch, hose clamp s.s. 2 inch, hose clamp s.s. 3 inch, pvc socket 1 inch, pvc socket 1/2 inch, pvc socket 3/4 inch, pvc valve 1 inch, pvc valve 1/2 inch, pvc valve 3/4 inch, pvc tee 1 inch, pvc tee 2 inches, pvc teflon tape, pvc gate valve 1 inch (kisan/texmo), pvc gate valve 1/2 inch (kisan/texmo), pvc gate valve 2 inches (kisan/texmo), pvc gate valve 3/4 inch (kisan/texmo), pvc elbow 1 inch (kisan/texmo), pvc elbow 1/2 inch (kisan/texmo), pvc elbow 2 inches (kisan/texmo), pvc elbow 3/4 inch (kisan/texmo), pvc casing pipe plain pipe 100 mm (kasta/kisan), pvc pipe 1 inch (kisan/texmo), pvc pipe 1/2 inch (kisan/texmo), pvc pipe 3/4 inch (kisan/texmo), pvc pipe 1.25 inch (kisan/texmo), pipe wrench 12 inches, pipe wrench 14 inches, pipe wrench 16 inches, pipe lifter 2.25 inches, pipe die 1.25 inch, panel board 15 hp three phase bentex (automatic), patti clamp 1 inch (isi), patti clamp 1.25 inch (isi), patti clamp 2 inches (isi), patti clamp 3 inches (isi), rubber ring 80 mm (isi) 3 inches, rubber ring 100 mm (isi) 4 inches, rubber ring 125 mm (isi) 5 inches, rubber ring 150 mm (isi) 6 inches, rubber seat packing, rod die, c.i. flange 2 inches, c.i. flange 3 inches, c.i. flange 4 inches, c.i. reducer tee 100x100 mm (isi), c.i. reducer tee 80x100 mm (isi), c.i. reducer tee 100x100x150 mm (isi), c.i. reducer tee 80x80x100 mm (isi), c.i. tee 100x100x100 mm (isi), c.i. tee 100x100x80 mm (isi), c.i. tee 150x150x150 mm (isi), c.i. tee 80x80x100 mm (isi), c.i. tee 80x80x80 mm (isi), c.i. tail piece 100 mm (isi), solvent, white cement, water tank 500 liters (syntex/kisan/texmo), water tank 1000 liters (syntex/kisan/texmo), vice handpump no. 4, chain pulley block 3 tons, nut and bolt, tail piece 2, 3, and 4 inches, gate valve 1 inch, gate valve 2 inches, gate valve 3 inches, gate valve 4 inches, gate valve brass 1 inch - isi, gate valve brass 1/2 inch - isi, gate valve brass 3/4 inch - isi, gate valve brass 2 inches - isi, gland rope, end cap pvc 1 inch, end cap pvc 1/2 inch, end cap pvc 3/4 inch, d joint ci 3 inches, d joint ci 4 inches, d joint ci 6 inches, hdpe d joint 2.5 inches, hdpe d joint 3 inches, hdpe d joint 4 inches, hand grinder machine 1600 watt bosch 5 inch, hand grinder blade 5 inch and 6 inch, hammer machine 1500 watt 26 mm bosch, breaker machine demolition 5 kg, fusing machine, sluice valve 50 mm, sluice valve 75 mm, sluice valve 90 mm, sluice valve 110 mm, tee 75 mm, tee 90 mm, reducer socket gi 1.25 inch-1.5 inch, reducer socket gi 2 inch -1.25 inch, r

Central Government/Public Sector

CTN :45246571

26 May, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - scrap ms mix consist of pantograph parts like lower arm, base frame, upper frame, pushrod, steady tube, balancer, longitudinal tube, push rod, carbon strip, , nut, bolts, chisel bar, chisel rod, chipping machine, clamp bailer, pavement breaker, coupling with rod, hand ratchet, jack rod, pipe cutter, plumb bob, punch rod, punch rivet, spanner, , chainhook, valve wheel, drill rod, hydraulic, valve wheel, drill rod, hydraulic jack, drill rod, plates trolley, cupboard note:- the purchaser should see the lot personally before bidding. no claim will be entertained after the sale of lot location: a by 1

Central Government/Public Sector

CTN :45220344

22 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - 98050126: cond. & u/s. ms/gi scrap consisting of re cut mast, canti lever assembly parts, pipes of sorts and sizes, stay and bracket, tubes,gi bolts of suspension clamp, bolt and nuts, clamp, pulley parts, steady arm and such other similar ms/gi items with/ without porcelain,ceramic insulator and non ferrous attachment as is where is condition. location: b-6 of scrap yard /ssd/ptj.

Central Government / Public Sector

CTN :45146134

19 May, 2026 NA

Multi City - Telangana

Tender For auction sale of depot ferrous scrap - 12220gi26b, 98011900, quantity- 28.160 mts. scrap condemned unserviceable gi material, consisting of gi sheets anti creep wire, side arm of atd, large register arm hook, c and w eye rod, double suspension clamp,9 tonne adjuster, gi channel sleeper, arm hook snap pin head, d.p. isolation base channel, l.v.c.b. pole caps, gi sheets, d.p. mechanism, traction mast pole cut pieces, dma cut mast, earthing electrode,9 tonne insulator, pedestal insulator, angles, cantilever assly channels, joists, bfb cut mast, bolts, u bolts, nuts, insulator caps, clamps, tripod antenna, la ring, anti fallen rods, atd l-angle, stay adjuster, bottom attachments, adopters, top attachments, u bolts, stay adjusters, stay sleeves, portal, drop bracket, rt tubes, bkt tubes, drop clips, isolator base, c clamps, steady arms, support angles, mast guy rod fitting, drop brackets, compensating plates, v bolts, bottom plates, super mast, bolts , compensating angles, optical fiber cable cut mast, insulators, gi u bonds, screw rods, pipes, stands, towers, buckets, pots, doper clip, snap paid pin, couplings, insulator bluff rod caps, covers and other ohe equipment of sorts and sizes, broken or unbroken, with or without insulation and with or without attachments of ms. location: bin no: 220, right side of road no- 2. hsn code- 72044900. gst- 18 percent. note: - delivery on actual weighment basis only. special note: overload of the carrying capacity of the vehicle will not be permitted at the time of taking delivery, as per motor vehicle act 1988.

CTN :45153910

25 Jun, 2026 NA

Varanasi - Uttar Pradesh

Tender For supply of strap saddle clamp as per drg.no. 8347343 alt ja specn: purchase specificationno.misc:532 rev. r1 [ warranty period: 30 months after the date of delivery ]

Saddle Clamp Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector