Latest safety harness Tenders | Government safety harness Tenders

Central Government/Public Sector

CTN :45354022

18 Jun, 2026 NA

Ratlam - Madhya Pradesh

Tender For tender for supply of tool kit bag keyman bag (pathan bag) spec-length 14.5 inchs, width 6.5 inchs, height 14.5 inchs material- nylon 1680, black, red and orange colour canvas for lining fibre used where as required for stiffness, rubber bolt at bottom, cushion for back side for comfort, sackeing belts with cushion shoulder belt are provided, waist belt are also provided , full body safety harness conforming to en 361-2002 provided with suitable adjustable work positioning belt / lanyard of 1.5 metres -2 metres length conforming to en 354/en358. make and model of the harness: model no rh 01 of neo safety products make or ultratek model of udyogi make or ibs opal sit harness full body or pn 56 of karam make. copy of the valid en certificates for safety harness and belt/lanyard should be submitted to prove conformity of products to the specification at the time of supply goggles with grey shades suitable for heavy gas cutting, plasma cutting, ultra thermic cutting operations, equipped with supra-vision hc-af optidur 4c plus permanently anti-fog and anti-scratch lenses. goggles shall provide 100% uv protection, high-impact resistance, and comply with is:5983:1980, en-166, and en-169 standards. lenses must be replaceable, and the goggles should be supplied with valid certification

CTN :45343656

08 Jun, 2026 NA

Sivaganga - Tamil Nadu

Tender For 2026-2027 annual tender for supply of public health - miscellaneous thalavadam materials - others) - chain saw mechine, motor pump set, generator 1 kw, generator 3 kw, generator 5 kw, generator 10 kw, safety harness bult, mask, rain coat, gumboots, gloves, reflective jacket, safety helmat, disaster management - rent, chain saw mechine, motor pump set, generator 1 kw, generator 3 kw, generator 5 kw, generator 10 kw, public health - push chart services, push chart wheel, push chart rotator, push chart push, iron plate 6 kg, l angle, painting and writing, labour charges, public health - fogging maching services (out door), valve, switch board, new silancer, wire, fule tank, tube, comberser, tab, corpenter materials and services, battery, nri valve, public health - fogging maching services (in door), valve, tube, burner, coile, service charge, public health - bathroom door, pvc door, steel door, bov, bov service, battery service, bov spares, dc motor 1500w/60v original, wheels &tyres (front: 3. 75 - 12 (6pr) - rear: 3. 75 - 12 (6pr), 15 amp smpscharger, 100 ah - 48 v. lead acid battery, 100 ah - 48 v. lithium battery, 100 ah - 48 v. smf battery, public health thalavadam miscellaneous materials, manvetti, kadaparai, iron pikas with 4 finger, kunthalam, aruval with handle, ricemill gi bucket, drainage cleaning gi plate, drainage cleaning agappai, manvetti, kunthalam, pikas handle, thagaram iron chatti (pond), moongil koodai(big), moongil koodai(small), kootumaru, bamboo stick milar with handle, plastic chatti, hand gloves, gumboot, rain coat, helmet, mask, euro reflective jacket, 12 gi bucket, plastic mug, road cleaning brush, aluminium anna koodai, moongil thattu, shovel, cotton coat, cotton cap, plastic anna koodai, 4 wheel pushcart vehicle, 50 lit capacity pushcart bucket, 200 lit capacity wheeled pushcart bucket

CTN :45326589

09 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of equipment items - dc motor:type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder: bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel supply: mounted on training base suitable for dismantling and inspection, hydraulic operated directional control valves (dcv):type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study, bearing with shaft assembly :type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips lock nuts end covers mounting: bench-mounted / frame-mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit :the plummer block housing material: cast iron (grade fg 200 or equivalent). type: sng or snl series (split-type housing). sealing: felt seals or v-ring seals (to demonstrate lubrication retention). lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearing type: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series). bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: ground carbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven).

CTN :45317986

04 Jun, 2026 3.96 Lacs

Silvassa - Gujarat

Tender For supply of wall support ladder , safety ladder , fall arrestor , safety harness belt , scaffolding , tools to work at height

State Government

CTN :45303639

06 Jun, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates of plant and machinery and materials category items for preparation/amendment of schedule of rate for the year 2026. - m 1055 - pumps supplying submersible pump sets confirming to is 8034 and motor confirming to is 9283. pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. motor suitable for working on 415v+10%, 3ph, 50 hz, a.c. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. the pump set shall be suitable for direct coupling. pump shall have suitable outlet as per manufacturers design. anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump., submersible pump set 100 mm dia (with polypropylene/ noryl impeller) up to 20 stages 1 h.p. , 1.5 hp, 2 hp, 2.5 hp, 3.0 hp, 4.0 hp, 5.0 hp, submersible pump 150 mm dia (with bronze/ss impeller) up to 8 stages, 1.5 hp, 2.0 hp, 3.0 hp, 4.0 hp, 5.0 hp, 6.0 hp, 7.5 hp, m 1056 - pressure guage providing fabricating, testing and commisioning pressure vessel fabricating in m.s plate on providing foundation including epoxy paint, pressure gauge (100 mm dia), pressure gauge (150 mm dia), vacuum / combination gauge, m 1057 - lifting equipment chain pulley block supplying triple spur gear type chain pulley block suitable for capacity as below with 3 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per is 3832 carrying isi mark., 1 tonne capacity, 2 tonne capacity, 3 tonne capacity, electric operated circular or rectangular travelling crane (single girder) supplying single girder electrically operated rectangular over head travelling crane with 6 m lift complete with wire rope hoist, class ii duty, all three motions electrically operated by suitable rating motor ip 54, control panel and down pendant control block., 5 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, 7.5 tonne capacity, above 6 m upto 8 m span, above 8 m up to 10 m span, 10 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, m 1058 - lightening arrester, ab switch, insulators, lightening arrestor supplying, erecting approved make thyrite type lightening arrestor suitable for h.t. supply with necessary ancillary material complete on provided cross arm and connected to overhead line., suitable for 11 kv supply, distribution class, suitable for 22 kv supply, distribution class, suitable for 33 kv supply, station class, disc insulator. supplying, erecting porcelain disc type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, pin insulator supplying, erecting porcelain pin type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, air break switch without earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for operating handle erected on extended square shaft. the operating handle provided with lock and key at suitable height from ground with necessary clamps, suitable for 11kv line, rocking / tilting type, rotating type, suitable for 33kv line, rocking / tilting type, rotating type, air break switch with earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch with earth switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for op

CTN :45252743

09 Jun, 2026 10.54 Lacs

Kajora - West Bengal

Tender For supply of sheet corrugated retro reflective astm d4956 7 x 9in path finder , escape route board retro reflective 1.5x1ft , no entry board retro reflective 1.5 x1ft , arrow boardretro reflective 1.5 x1ft , chain lashing 14mm p 50mm as 2.7m with hook , stemming rod sal wood round 36mm 2700mm , kit safety harness full body adjustable , hose wire braided hyd hp 1 by 2in 3000psi

CTN :45265742

22 Jun, 2026 NA

Kanchrapara - West Bengal

Tender For supply of safety harness ergonomic horizontal h shaped thigh straps, size adjustment straps at chest, shoulder and thighs. double lanyard with shock absorber with is 3521-2003 (or latest), isi marked. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :44383089

22 May, 2026 NA

Goa - Goa

Tender For bid to ras supply of safety helmets with detachable rechargeable led lamp , heat resistant gloves size large , rubber gloves free size , ear defenders noise reduction 35 db , safety goggles , washable work gloves as per encl , steel toe oil resistant safety shoes as per encl , usb rechargeable flashlight 3000 lumens ip68 , rechargeable led hand torch as per encl , corded ear plugs noise reduction 35 db , industrial dust mask as per encl , torch with head band , leather apron , fluorescent jacket size l , safety harness full body harnes atleast capacity 20kn , tool waist belt , gum boots size 9

State Government

CTN :45228148

03 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of tube cleaning equipment - heavy duty flexible shaft with antifriction lining complete with 5/8" inner core and, hand piece of plain end bearing type suitable for cleaning of 37 mm i.d, brass/ss tubes. (with outer casing not more than 33mm), length 25, length 30, heavy duty flexible shaft with antifriction lining complete with 1/2" inner core and, hand piece of plain end bearing type suitable for cleaning of 37 mm i.d brass/ss, tubes. (with outer casing not more than 33mm), length 25, length 30, spare hand pieces having plain end bearing for above flexible shafts (5/8mm inner, core) for cleaning of 37 mm id brass tubes, plain end bearing for above flexible shafts (5/8mm inner core) for cleaning of 37, mm id brass tubes, motor side nipples suitable for 5/8 inner core having female threads on one side, and 11/16 size on other side total length of nipple shall be 2, - do - but having female threads on one side (hand piece side), turk head brushes for cleaning of, 37 mm i.d. tubes, 37.6 mm i.d. tubes, 42 mm i.d. tubes, 98 mm i.d. tubes, 96 mm i.d. tubes, tool head cutter of 15 gears with male thread of suitable for cleaning of 37 mm i.d., tube cleaning motor of 5 hp x 2900 rpm, kirloskar make, duly mounted one trolley,, complete with dol starter, 2 mtr cable., steel wire dusting brushes of size 8 x 4 having steel wire protruding 1 x 16, swg, steel wire dusting brush of size 6 x 2 with handle having spring steel wire, protruding 1 x 16 swg with 5 rows of 14 bunches having 40 wires in each bunch., cleaning equipments eng.., flexible shaft with short hand piece (for bend tube)with 12 mm inner core and 10 mt, inner core flexible shaft 3/4", inner core of dia 5/8" for above flexible shaft, inner core of dia 1/2" for above flexible shaft, flexible shaft with short hand piece for bend tubes, 12mm inner core x 16 mtr long, flexible shaft with short hand piece for bend tubes, 18mm inner core x 12 mtr long, flexible shaft with short hand piece for bend tubes , 18mm inner core x 21 mtr long, tool head cutter complete for boiler bent tubes suitable for cleaning of tubes, of, (a) 76.2 mm od tube, (b) 70.0 mm od tube, (c) 63.5 mm od tube, (d) 50.0 mm od tube, cutter wheel for, (a) 76.2 mm od tube, (b) 63.5 mm od tube, (c) 70.0 mm od tube, (d) 50.0 mm od tube, trunk head brush suitable for boiler, 50 mm, 56mm, 63.5mm, 70 mm, 72.6 mm, 76.2 mm, pins for tool head cutters of above sizes (as per sample), plain end bearing for above flexible shafts, (spare hand piece having double ball bearing for flexible shaft 18mm inner core with, nipple 55mm long), plain end bearing for above flexible shafts, (spare hand piece having double ball bearing for flexible shaft 12mm inner core with, nipple 55mm long), hand piece side nipple with socket suitable for " inner core 2" length, m.s. nipple with socket suitable for " inner core, 10"x2" polymer wheel suitable for 50/100 kg sugar carying trolley, sugar bag carryaing trolly heavy duty quality heaving angular frame based on 2 nos, heavy duty polymer vheels size 10" by 2" shelf lubricated duly furnished and painted, load carryong 150 kg.

corporations/Associations/Others

CTN :45204431

25 May, 2026 NA

Surat - Gujarat

Tender For supply of various types of safety equipments safety helmet ,electrical safety gloves ,mechanical gloves ,chemical gloves, chemical protective suits ,full body safety harness, wind sock/indicator cloth

Safety Harness Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government

corporations/Associations/Others