Get complete information related to latest Safety Chain Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Safety Chain Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Safety Chain Tenders.
Tender For supply of traction transformer complete with cooling system & accessories like h.t. cable along with protection shield in passenger compartment and underframe area, thermostat etc. related protection equipment and with safetychain arrangement including termination crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, equipment mounting and earthing hardware and accessories as per attached specification suitable for 3 phase memu (medha, on-board). make/brand-siemens/medha [ warranty period: 30 months after the date of delivery ] ]
Tender For supply of 3kw , 30volt, 100 amp. transom, low cut-in, low mfo alternator connected withflat belt driven pulley with rectifier regulator unit complete set, each set consists of:- (1)3kw, 30v, 100a low mfo, low cut-in alternator fitted with flat belt driven alternator pulley as per kel drawing no: 2-a 3106 or equivalent, alt nil or latest qty= 01 no (2) rectifier cum regulator of magnetic amplifier type as per kel drg. no : 3-a 3124 or equivalent, alt-5 or latest, qty-01 no (3) safetychain as per kel drg no : 2-a 3076 or equivalent, alt nil or latest, qty= 02 nos (4) suspension hanger pin as per kel drg. no : 2-a 3035 or equivalent, alt- nil or latest, qty- 01 no (5) cleat for cable anchoring as per kel drg, no: 2-a 4014 or equivalent, alt 2 or latest, qty-01 set [ warranty period: 30 months after the date of delivery ] ]
Tender For supply of round endless nylon or polyster sling 1 ton x 1 mtr effective length , polyester round sling 2 ton x 3 mtr , polyester round sling 3 ton x 3 mtr , polyster round sling cap 5 tonne 3 mtrs long , polyster duplex flat webbing sling cap 2 ton, length 3m , flat nylon sling with eye at both ends, capacity 3 ton, length 3m , polyster duplex flat webbing slings 5 ton 5 mtr length , polyester webbing sling 10 ton 05 meter length , chain pulley block 1 ton with 3 mtr fall , chain pulley block cap 2 ton x 3mtr , chain pulley block 3mt capacity with 3 mtrs. lift , m6 bolts 50mm m6x50mm with nut and washer gi , m8x30mm gi nut bolt , hex bolt with nut and washers m10x40 , hex bolt with nut and washers m10x55 , hex head bolt and nut full threaded m12x40 , gi nut bolt m12x50,with nut and washer,full threaded , hexagonalbolt m12 x 60 mm bs3692 gr8.8 , hex head bolt m12x70 , hex head bolt m12x90 , hex bolt m12x100 , hex bolt m14x100 , hex bolt m16x60 , hex bolt m16x80 , hexagon bolt, m16x90 , hex bolt m16x120 , hex bolt m20x50 gr 8.8 , hex bolt m20x60 , hex bolt m36x100 , threaded rod m8, material alloy steel, gr.10.8 or higher , threaded rod m10, material alloy steel, gr.10.8 or higher , threaded rod m12, material alloy steel, gr.10.8 or higher , threaded rod m16, material alloy steel, gr.10.8 or higher , threaded rod m20, material alloy steel, gr.10.8 or higher
Tender For supply of brushless alternator of 25 kw capacity, 110/130 volt dc, v- belt driven on both ends complete with deep groove `v belt alternator pulley, axle pulley, poly chloroprene rubber pad, safetychain, belt tensioning arrangement suitable for use on 110 v, dc air-conditioned coaches conforming to rdso specn no. rdso/pe/spec/ ac/0056-2004 (rev 0) with amendment no. 1. and without rectifier cum regulator unit [ warranty period: 30 months after the date of delivery ] ]
Tender For brushless alternator of 4.5 kw cap.v belt driven to rdso/pe/spec/tl/0054-2003(rev.0 or latest) with amdt no.1 & 2 suitable for 110 volts train lighting system with following scope of supply as per detail description given below:1) 4.5 kw 110v alternator-1 no. (2) deep groove (4) alternator pulley as per spec.no elps/spec/tl/13 march-98 asper drg.no.skel-3882 (rev.2)-2014 -1 no. 3) safetychains 2 nos. (4) suspension hanger pin with fastners 1 no. (5) belt tensioning device assly.1 no [ warranty period: 30 months after the date of delivery ] ]
Tender For procurement of pneumatic & mechanical spares at ahmedabad bottling plant, sanand - filter regulator lubricator 1/2" , filter regulator lubricator 0.25 inch , pu tube 4 mm , pu tube 6 mm , pu tube 8 mm , pu tube 10 mm , pu tube 12 mm , elbow fitting 4x0.25 inch , elbow fitting 6x0.25inch , elbow fitting 8x0.25 inch , elbow fitting 10x0.25 inch , elbow fitting 4x0.125 inch , elbow fitting 6x0.125 inch , elbow fitting 8x0.125 inch , elbow fitting 10x0.125 inch , elbow fitting 6x1by 2 inch , elbow fitting 8x1by2 inch , elbow fitting 10x1by2 inch , elbow fitting 6x3by8 inch , elbow fitting 8x3by8 inch , elbow fitting 10x3by8 inch , straight fitting 4x1by4 inch , straight fitting 6x1by4 inch , straight fitting 8x1by4 inch , straight fitting 10x1by4 inch , straight fitting 4x1by8 inch , straight fitting 6x1by8 inch , straight fitting 8x1by8 inch , straight fitting 10x1by8 inch , straight fitting 6x1by2 inch , straight fitting 8x1by2 inch , straight fitting 10x1by2 inch , straight fitting 6x3by8 inch , straight fitting 8x3by8 inch , straight fitting 10x3by8 inch , tee fitting 4x4x1by4 inchmm , tee fitting 6x6x1by4 inch mm , tee fitting 8x8x1by4 inch mm , tee fitting 10x10x1by4 inch mm , tee fitting 12x12x1by4 inch mm , tee fitting 4x4x1by8 inchmm , tee fitting 6x6x1by8 inch mm , tee fitting 8x8x1by8 inch mm , tee fitting 10x10x1by8 inch mm , tee fitting 4x4x4 mm , tee fitting 6x6x6 mm , tee fitting 8x8x8 mm , tee fitting 10x10x10 mm , tee fitting 12x12x12 mm , push and pull type pneumatic switch , 5/2 hand lever type pneumatic switch x , double pilot valve 5by2 x 1by4 inch , single pilot valve 5by2 x 1by4 inch , or gate 1by4 , pneumatic cylinder 50 x 450 non-magnetic , pneumatic cylinder 50 x 250 non-magnetic , pneumatic cylinder 50 x 300 non-magnetic , pneumatic cylinder 50 x 320 non-magnetic , pneumatic cylinder 63 x 80mm non-magneti , pneumatic cylinder 50 x 80 mm non-magnet , pneumatic cylinder 125 x 300 mm non-magn , pneumatic cylinder 50 x 125 mm non-magne , pneumatic cylinder 50 x 320 magnetic typ , pneumatic cylinder 50 x 500 magnetic typ , pneumatic cylinder 63 x 160 mm magnetic , quick exhaust valve 1by2 inch , quick exhaust valve 1by4 inch , quick exhaust valve 3by4 inch , pnuematic cylinder 50x300 with profile f , dnc festo 40 cylinder seal kit , smc cylinder 50 seal kit , norgren cylinder 50 seal kit , smc cylinder 63 seal kit , festo cylinder 50 seal kit , pneumatic connector 14x1/2 , pneumatic connector 12x3/8 , pneumatic connector 10x3/8 , pneumatic connector 8x3/8 , solenoid valve with 3/2 valve 24vd , solenoid valve with 5/2 valve 24vd , ss304 angle valve 1/2" , spring for self centering , baliga, has, teflon hose (600 mm) , baliga, has, hot air gun (hylum) , plumber block w/ brg, 213-65mm, conveyor , plumber block w/ brg, 212-60mm, conveyor , bearing unit, ucp-213 , bearing, pillow block, ucp 212, ntn , uhmw strip 40mmx10mmx3000mm , roller, teflon, p/n:e24-10001 , pressur gauge 0-16 kg 6 inch , pressure gauge 0-28kg, dial 6 inch , pressure gauge 0-16 kg, dial 4 inch , pin, chain, en-24, conveyor , ms 60 mm bore 32 teeth duplex gear , ms 60 mm bore 38 teeth duplex gear , duplex sprocket 65mm x 32 teeth , duplex sprocket 65mm x 34 teeth , duplex sprocket 65mm x 36 teeth , duplex sprocket 65mm x 30 teeth , duplex sprocket 58 mm x 18 teeth , duplex sprocket 58mmx 20 teeth , duplex sprocket 58 mm x 24 teeth , introduction stopper assembly , hexnipple-1/2"npt(m)to 1/2"bspt(m) , jaw coupling 110 no , jaw coupling 150 no , sprkt chain, duplex drive gear, 1inpitch , ms 2.5 mtr c channel for conveyor , ms angle for conveyor 40mm x 40mm x 6mm , lock nut 16 mm bsp thread , csk bolt 8x35 mm with nut washer , csk bolt 10x60 mm with nut washer , o ring inserter tool , shaft with key, conveyor, 60x65, length-850 , shaft for helical gear 60 mm bore length , alen bolt m6x 25 (full thread) with lock nut , alen bolt m6x 40 (full thread) with lock nut , alen bolt m8 x 25 (full thread) with lock nut , alen bolt m8 x 40 (full thread)
Tender For supply of safetychain with hook/ suitable locking arrangement at ends for pad locking having length of 10 feet as per rdso specifications no. tfc/spec./374/safetychain and other specifications mentioned therein. as per drg.no. rdso specification no. tfc/specs/374/safetychain specn: safetychain with hook/ suitable locking arrangement at ends for pad locking having length of 10 feet as per rdso specifications no. tfc/spec./374/safetychain and other specifications mentioned therein. [ warranty period: 30 months after the date of delivery ] ]