Latest safety clamp Tenders | Government safety clamp Tenders

corporations/Associations/Others

CTN :43527395

24 Jan, 2026 NA

Ramanathapuram - Tamil Nadu

Tender For 58/25-26 supply of 4000 set of stay set complete

Central Government/Public Sector

CTN :43497306

19 Jan, 2026 1.72 Lacs

Bokaro - Jharkhand

Tender For a- erection of dp pole, stay set a.b. switch 11kv grade, 800 amps near mobile crusher for new transformer at 5.0 mtpa madhuband washery, b- erection and dp pole, stay set, laying of conductor for weighbridge at loading section of madhuban coal washer

State Government

CTN :43480719

19 Jan, 2026 1.17 Crore

Ranchi - Jharkhand

Tender For 314/supply of electric line materials - electrical items :, gi wire no. 6, gi wire no. 8, gi wire no. 10, 11 kv stay set complete (1800x16 mm) with stay wire 7/10 swg and guy insulator, earthing (chemical) with gi earthing pipe 20 mm 2.5 mtrs. long, earth clamp for earthwire (50 x 6 mm)[galvanized] (1.8 kgs.), gi stay set complete for d/s/s (1900x 16mm) with staywire 7/12 swg and guy insulator, gi service pipe 40 mm diameter 3 mtr length, lt stay set complete (1700x16 mm) with stay wire 7/12 swg, angle/side stay clamp ( 50x6 mm) for 8 mtr 200kg psc pole[galvanized] (1.08 kgs.), galvanized nuts and bolts , 2.5 inch (full thread) 5/8 inch dia, galvanized nuts and bolts, 3 inch (full thread) 5/8 inch dia, galvanized nuts and bolts, 4 inch (full thread) 5/8 inch dia, galvanized nuts and bolts, 7inch (half thread) 5/8 inch dia, galvanized nuts and bolts, 8 inch (half thread) 5/8 inch dia, galvanized nuts and bolts, 10 inch (half thread) 5/8 inch dia, galvanized nuts and bolts, 12 inch (half thread) 5/8 inch dia, gi stay set complete for d/s/s (1900x 20mm) with staywire 7/10 swg and guy insulator, stone base plate for 11 kv, dss, lt, gi base plate for 33kv (500x500x10 mm) avg weight 19.6kg/plate, earthing (chemical) with gi earthing pipe 40 mm 3.1 mtrs. long (bentonite as intermittent layers), earthingg.i.strip (65x6)mm2, danger board 33 kv/ 11 kv/ lt, anticlimbing device(barbed wire) 2x12 swg, aluminium winding wire/tape/strips etc..

corporations/Associations/Others

CTN :43495179

23 Jan, 2026 16.70 Lacs

Virudhunagar - Tamil Nadu

Tender For supply of stay set complete

corporations/Associations/Others

CTN :43490551

21 Jan, 2026 8.70 Lacs

Villupuram - Tamil Nadu

Tender For supply of ms stay set complete

Central Government/Public Sector

CTN :43464178

22 Jan, 2026 31.61 Lacs

Korba - Chhattisgarh

Tender For supply of rotating unit complete set_gme 6_80_pop_02_part no 680gmerot01 , impeller_moc lg_2__ibp 5chr 150_200_pop_2_part no 1500lg2 , balance valve_ibp 5chr 150_200_ pop_2_part no 1900 , neck ring with screw_ibp 5chr 150_200_pop_2_part no 1181 , pairs of sleeve moc lg_2_ibp 5chr 150_200_pop_2_part no 2102_2103 , set of two bearing buish_moc_bb_ibp 5chr 150_200_pop_2_part no 2700 , stage body_ibp 5chr 150_200_pop_2_part no 1101 , neck bush with screw_ibp 5chr 150_200_pop_2_part no 1182 , combined diffuser_ibp 5chr 150_200_pop_2_part no 1020 , bearing housing_ibp 5chr 150_200_ pop_2_part no 2760 , shaft with key 5 stage_ibp 5chr 150_200_pop_2_part no 1800 , set of sleeve nut_ibp 5chr 150_200_pop_2_part no 3031_3033 , delivery diffuser_ibp 5chr 150_200_pop_2_part no 1043ci , delivery cover_ibp 5chr 150_200_pop_2_part no 1042 , suction cover_ibp 5chr 150_200_pop_2_part no 1190 , stay bar_ibp 5chr 150_200_pop_2_part no 1110 , balance valve cover_ibp 5chr 150_200_pop_2_part no 1902 , logging ring_ibp 5chr 150_200_pop_2_part no 2300 , balance valve key_ibp 5chr 150_200_pop_2_part no 3270 ) /bid number : gem/2026/b/7067087 * /dated: 06-01-2026 & & / bid document 1 / 24

corporations/Associations/Others

CTN :43448707

19 Jan, 2026 23.60 Lacs

Tiruchirappalli - Tamil Nadu

Tender For supply of stay set complete

corporations/Associations/Others

CTN :43427018

17 Jan, 2026 15.34 Lacs

Multi City - Karnataka

Tender For procurement of consumable spare parts for annual maintenance of conveyor based road sweeper machine - cylinder conveyor lift, dcc-sm-item-022-asm, turnbuckle, dcc-sm-item-021-spring - ext, main broom, dcc-sm-item-020-plate weldment, drag shoe, lh, dcc-sm-item-019-plate weldment - drag shoe, rh, dcc-sm-item-018-arm weldment- drag shoe, dcc-sm-item-017-oil - hydraulic (vg68), dcc-sm-item-016-breather - hydraulic tank, dcc-sm-item-015-estimated charges for 3 days for per person (including travel, food, stay & conveyance), dcc-sm-item-014-grease multipurpose, dcc-sm-item-013-bearing unit, main broom, dcc-sm-item-012-bearing- 50 mm, 4bolt, dcc-sm-item-011-wear plate weld- drag shoe, dcc-sm-item-010-asm - conveyor lower skirt, dcc-sm-item-009-mandrel broom strips, set (1 set - 18 strips), dcc-sm-item-008-side broom bristles segment asm 40/60 ratio (price for one segment. total 9 segments per sweeper), dcc-sm-item-007-coolant glycol 50% concentration, 50/50 ratio, dcc-sm-item-006-oil- 15 w40, dcc-sm-item-005-kit- oil filter/seal, dcc-sm-item-004-secondary filter element, dcc-sm-item-003-primary filter element, dcc-sm-item-002-fuel filter element, dcc-sm-item-001-kubota engine cartridge, oil filter, dcc-sm-item-047-terminal block - fused, 6 pos, 30a, dcc-sm-item-046-asm - cooler fan, brushless, dcc-sm-item-045-asm - throttle actuator, dcc-sm-item-044-sensor - proximity, dcc-sm-item-043-asm - water pump, dcc-sm-item-042-hyd motor - conv, dcc-sm-item-041-hyd motor, side broom, dcc-sm-item-040-hub asm, main brm, lh, dcc-sm-item-039-asm, manderl ss, strip broom, dcc-sm-item-038-pin - drag shoe, dcc-sm-item-037-bracket - drag shoe stop, rh, dcc-sm-item-036-bracket - drag shoe stop, lh, dcc-sm-item-035-wear plate - lower, conv, dcc-sm-item-034-conveyor chain, dcc-sm-item-033-sprocket - idler, rubber, conv, dcc-sm-item-032-sprocket - toothed, rubber, conv, dcc-sm-item-031-tube -spacer, dcc-sm-item-030-wiper asm - conveyor, dcc-sm-item-029-wiper - 3.12 x 57.7, 4 ply, dcc-sm-item-028-spray tip (brass), dcc-sm-item-027-spray tip (brown), dcc-sm-item-026-spraytip (blue), dcc-sm-item-025-spray tip (orange), dcc-sm-item-024-cable - 3/16 dia x 22.31 lg, dcc-sm-item-023-cable - drag shoe, dcc-sm-item-072-brkt - hinge, conv skirt, rh, dcc-sm-item-071-brkt - hinge, conv skirt, lh, dcc-sm-item-070-pin - conveyor skirt, dcc-sm-item-069-shaft weldment - main broom, dcc-sm-item-068-spring - comp, 2 od x 7 fl, sb, dcc-sm-item-067-hub weldment, main broom, rh, dcc-sm-item-066-collar - conv shaft, dcc-sm-item-065-pin - main brm hub, dcc-sm-item-064-main broom spray bar assembly, dcc-sm-item-063-relay, dcc-sm-item-062-shaft weldment, conv, lower, dcc-sm-item-061-wldmnt- conv shaft, upper, dcc-sm-item-060-holder - relay, dcc-sm-item-059-main broom spray system qrc , dcc-sm-item-058-nozzle body, dcc-sm-item-057-asm - manifold, sb pressure reg, dcc-sm-item-056-kit- conv. bearing, bot, service, dcc-sm-item-055-bushing - drag shoe pivot, dcc-sm-item-054-check valve - 0.5 inch npt pvc, dcc-sm-item-053-kit conveyor lower skirt, dcc-sm-item-052-gasket - nozzle, rubber, dcc-sm-item-051-nozzle cap, dcc-sm-item-050-tachometer, dcc-sm-item-049-heavy duty chain pin, dcc-sm-item-048-bushing - 2.632 od x 3, w/ o-rg grvs, dcc-sm-item-098-switch, momentary/locking, dcc-sm-item-097-adapter, nozzle water spray sb, dcc-sm-item-096-connector female, 3/8 inch bsp- 12mm dia, dcc-sm-item-095-spray nozzle full cone 1/8 inch bspp, dcc-sm-item-094-switch - magnetic, time delay, dcc-sm-item-093-assy solenoid, dcc-sm-item-092-fuse - blade 30a, dcc-sm-item-091-assy pump, fuel, dcc-sm-item-090-assy starter, dcc-sm-item-089-shock absorber - sweeper, dcc-sm-item-088-light asm - work, dcc-sm-item-087-camera monitor- kit, dcc-sm-item-086-potentiometer, dcc-sm-item-085-solonoid driver, dcc-sm-item-084-disc - main broom end cap, dcc-sm-item-083-assy dynamo, dcc-sm-item-082-asm - drag shoe arm, dcc-sm-item-081-hub weldment, sb, dcc-sm-item-080-prefilter, dcc-sm-item-079-cylinder - sb no vent,

corporations/Associations/Others

CTN :43364974

13 Jan, 2026 24.15 Lacs

Karur - Tamil Nadu

Tender For supply of stay set complete - 5250 set

State Government

CTN :43411606

19 Jan, 2026 NA

Almora - Uttarakhand

Tender For supply of decentralized material of estimate and replacement of bare conductor to a.b cable at mohan feeder in 33/11 kv substation ghasmandi, edsd (town) ramnagar - supply of half clamp for lt distribution box sp-21 with nut & bolt., supply of stay clamps for sp-21 with nut & bolt., supply of suspension clamp with i hook., supply of dead end clamp with i hook., supply of piercing connector 25 sq.mm to 16 sq.mm, supply of piercing connector 120 sq.mm to 95 sq.mn, supply of lt bare n connector pg clamp 95 sq.mm to 25 sq.mm, supply of lt distribution box 3phase 4wire., supply of lugs 0 type to 120 sq.mm., supply of aluminium lug size 25 sq.mm., supply of lt clamp sp-21 with nut & bolt., erection of earthing rod., excavation of pit for stay set, erection of lt stay set, grouting of stay set., excavation of pit for pole., erection of single pole sp-21., grouting of pole., muffing of pole, dismantling of lt line 1 p2 wire(weasel)., dismantling of lt line 2 p 3 wire(weasel)., dismantling of lt line 3 p 4 wire(weasel)., cartage of sp-21/23 pole. 21 to 50 km, cartage of petty materail 21 to 50 km, disconnection & re-connection of consumers., straightning of tilled poles, re-saging of lt ab cable, installation of lt distribution box., fixing of dead eend clamps, fixing of suspension clamps with i hook., fixing of piercing connector l2l 120-120 sq.mm.

Safety Clamp Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors