Latest safety harness Tenders | Government safety harness Tenders

corporations/Associations/Others

CTN :45021663

05 May, 2026 NA

Valsad - Gujarat

Tender For annual rate tender for purchase of materials of construction / road resurfacing for year 2026-27 - brick, sand, kapchi 25 to 40 mm, grit 6 to 10 mm, handmade metal 40 to 63 mm, rubble 9 inch, cement (53 grade) 50kg, tor steel, 60 mm rubber rise, m40 paver block, 80 mm rubber rise, m40 paver block, g.s.b., dust (powder), brick masonry (1:6), stone masonry (1:6), plaster (1:4), r.c.c. slab filling 1:2:4, (to give the price of steel separately in kg), r.c.c. slab filling 1:1/2:3 (to give the price of steel separately in kg), p.c.c. (1:3:6), p.c.c. (1:4:8), pointing (1:2), yellow soil, hard murrum, handmade metal, np3 pipe 300mm, np3 pipe 450mm, np3 pipe 600mm, np3 pipe 900mm, np3 pipe 1200mm, j.c.b machine (including diesel driver), roller (including diesel driver), truck (including diesel driver), hydraulic center trailer (including diesel driver), semi dense carpet patch work on various roads in pardi municipal area, building materials and soil lifting work from pardi municipal area, compounding of tarkhuta in pardi municipal area (excavation including five wire, cross wire, cement pole), waterproofing, two coat putty or two coat of primer (including brushing), wall painting (three coat) with plastic emulsion paint, ceiling painting (three coat) with plastic emulsion paint, outer wall painting (three coat) with weather proof acrylic emulsion paint including priming coat, box cutting the road surface to proper slope and camber for making a base for the road work including removing the excavated stuff and depositing on the road side slope as directed upto 50 mt lead., scarifying gravelled macadam or bitumen macadam surface 6 cm to 10 cm depth including stacking useful materials on road side and disposing off remaining stuff, construction of granular sub-base by providing well-graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix-in place method with rotavator at omc and compacting smooth wheel roller to achieve the desired density, complete in two layers as per technical specification clause 401., providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density in two layer. by mechanical means with 1 km lead, providing and laying bituminous base course 75 mm thick compacted in two layers with tack coat of asphalt (vg-30) 80/100 at the rate of 2.5 kg/10 sqmt and using b.t. stone aggregates of required gradation and asphalt 80/100 grade for mixing @ 1.99% by weight of total mix including heating the aggregate and asphalt by drum mix plant and spreading the same by paver finisher and consolidation with vibratory roller including providing all materials, equipment’s, tools and plants, oil, kerosene, fire wood, labour charges etc. complete., providing and laying 50mm thick compacted b.m. with b.t. aggregate as per mort&h specification and asphalt grade (vg-30) 80/100 for tack coat at 2.5 kg/10 sqmt with mechanical sprayer and bitumen grade 80/100 for mixing at the rate 34.0 kg/m.t. i.e. 3.4% of total mix including heating the aggregate and asphalt by drum mix plant and spreading the same by paver censor finisher and consolidation with vibratory roller including providing all materials, equipments, tools and plants, oil, kerosene, fire wood, labour charges etc. complete., providing and laying 25 mm thick compacted semi dense bituminuous concrete using stone chips as per mort&h gradation and asphalt grade (vg-30) 80/100 for tack coat at 2.5 kg/10 sqmt with mechanical sprayer and 80/100 grade asphalt for mixing @ 5.0% by weight of total mix for binder including heating the aggregate and asphalt by drum mix plant and spreading the same by paver finisher and consolidation with vibra

Central Government / Public Sector

CTN :43680715

27 Apr, 2026 31.13 Lacs

Gorakhpur - Uttar Pradesh

Tender For bid to ras corrigendum : supply of safety helmets , dust mask n95 , fall arrestor , multipurpose full body safety harness wi , cryogenic hand gloves , cryo suit suitable upto min 190 c , caution tape 250 mtr , goggles antifog anti scratch , chemical suit extra durable , ear plug corded with hard case , loto locks long shackle colour red , electrical lototo box , refletive jackets , wind socks cloth only double layer , wind socks stand , water gel blanket , first aid box as per factory act sui , retro reflective tape self adhesive , rescue tripod , davit arm system , steam resistant hot liquid suit , hot oil steam splash hand gloves suitab , gum boot with steel fiber toe , hand gloves pu coated , cotton hand gloves dotted , heat resistance hand gloves , cut resistance hand gloves , chemical hand gloves , fire blanket 1mtr x 2 mtr , safety shower and eye wash , life jacket with reflectors , lifebuoy ring , ear plug dispenser , ear plug dispenser refill , self alarm device , first aid box refill kit , manikin ) /bid number: gem/2026/b/7134533 * /dated: 22-01-2026 & & / bid document1 / 35

State Government

CTN :44935631

05 May, 2026 NA

Manuguru - Telangana

Tender For supply of stock items(consumables) for various circles of btpshack saw frame, tape,1/2x10m,teflon, valve,compound,lapping-400,mesh fine, valve,compound,lapping-400gms,medium, spray,340ml,anabond magna solvent, switch,5a, sockets 3 pin 15a, sockets 3 pin 5a, capacitor,cieling fan,2.5 mfd, lubricant;type:rustolene;form:liquid;container:5 lt;additional, information:tin, molykote-1000 in 1kg., blade,hack saw,300x25x1.25mm,ss, m-seal (quick setting) phatta plated (1kg.), hpsv lamp ignitors 70with 150with 250with 400with 1000 w, air hose pipe 20mm, dum dum paste, hack saw blade high spd, 300x12.5x0.63mm, fall protection safety harness (12mm polyster,3 strands twisted fibre 1.7m lanyard rope , safety belt,810g,arresting force:6kn,32mm energy absorber rope., tape,pvc,1.9cmx8mx0.125mm,blue, tape,pvc,1.9cmx8mx0.125mm,yellow, tape,teflon,3/4"x10m, tape,pvc,1.9cmx8mx0.125mm,black, tape,pvc,1.9cmx8mx0.125mm,green, tape,pvc,1.9cmx8mx0.125mm,red, steel wire brush, air hose pipe,25mm, lubricant;type:rustolene;form:liquid;container:0.5 lt;additional, information:tin, hand glove,sige,18,pvc, tape,teflon,ptfe,25mmx10m, contact cleaner,500ml,quick evoporated, emery cloth sheet,230x280 mm,water emery, leather hand gloves14, hand glove,18,rubber, emery cloth fine, gloves;size:14 inch;material:asbestos, switch,15a, compound,400g,coarse,valve lapping.

CTN :44892860

18 Jun, 2026 NA

Delhi - Delhi

Tender For procurement of spares for an-32 aircraft - shocks absorber, check bolt, bolt, block, clamp, bolt, end, surge stopper, damper (v), pipe line in left engine nacelle, bolt (0101 through 0605), safety harness, bracket, jet, end piece with hose, bracket, lock, capacitor, retainer, attachment of ics acess, lock, lh, lock, rod, edging, angle, lock, rh, relay, bolt, cover, knob for pot (ms27473t16f35p), framing, bracket (up to 0610), holdr (lh) (through 0710), pipe, elbow, cable (to no. 0510 length 6330 mm), casing, lock casing (lh), bracket, relay time, pipeline, installation of nav foot ptt switch betn f 5 and 6, left hand side, runner, through connection, framing, selector switch, pipeline, elbow, pipe, leading edge, bellcrank, rope, threaded t-piece, selector switch, rivet, rear plate, an32 flight acc. a kit als, matting connector, support (rh), support (lh), link, axle, selector switch, cover plate, panel, cover plate lh, panel, pipe, panel, bracket, power supply card, panel

CTN :44822905

20 Apr, 2026 97.2 Thousand

Delhi - Delhi

Tender For corrigendum : providing of custom bid for services - tsv testing,custom bid for services - highmast rope testing,custom bid for services - pressure vessel ut testing,custom bid for services - safety harness testing,custom bid for services - lifeline testing

Central Government/Public Sector

CTN :44846085

01 May, 2026 NA

Ramgarh - Jharkhand

Tender For supply of industrial safety helmet white colour hdpe 3 rib cotton suspension sail sru rr logo should be printed in the front side manufactured after january 2026,industrial safety helmet blue colour hdpe 3 rib cotton suspension sail sru rr logo should be printed in the front side manufactured after january 2026,industrial safety helmet green colour hdpe 3 rib cotton suspension sail sru rr logo in the front side manufactured after january 2026,industrial safety goggles manufactured after january 2026,industrial dust mask ffp3 manufactured after january 2026,corded earplug,ear muff,cut resistant gloves,cotton hand gloves,electrical insulated hand gloves,electrical insulated hand gloves,electrical insulated hand gloves,electrical safety gum boot,full body safety harness with shock absorber,retractable fall arrestor,arc flash suit,face visor,welding face shield,welding apron,leather hand gloves for welding,safety net,safety net,electrical insulation mat,reflective tape,fire retardant blanket with nylon carrying bag,caution

Central Government/Public Sector

CTN :44773446

24 Apr, 2026 NA

Erode - Tamil Nadu

Tender For supply of safety harness with lanyard as per specification attached. [ warranty period: 12 months after the date of delivery ]

corporations/Associations/Others

CTN :44716115

22 Apr, 2026 14.59 Lacs

Dehradune - Uttarakhand

Tender For procurement of safety and security equipment for dhakrani power house (dehradun) - procurement of safety and security equipment, caution tape reflective roll as per technical specifications, led search light 10w (range 2 km.) as per technical specifications, life jacket free size with adjustable strap, retro reflective as per technical specifications, safety helmets with ratchet type adjustable strip, colour-white as per technical specifications, safety helmets with ratchet type adjustable strip, colour-blue as per technical specifications, safety helmets with ratchet type adjustable strip, colour-yellow as per technical specifications, safety helmets with ratchet type adjustable strip, colour-brown as per technical specifications, safety helmets with ratchet type adjustable strip,colour- grey as per technical specifications, safety harness full body complete with all accessories as per technical specifications, first aid kit box mounting type with accessories as per technical specifications, retro-reflective barricade (made of pvc, water filled with interlocking feature) size 36" x 72" x 24" as per technical specifications, traffic cone 750mm, base 300 x 300 mm, with chain and hooks as per technical specifications, jute rope (length 100 m, thickness 30 mm ) as per technical specifications, jute rope (length 100 m, thickness 25 mm) as per technical specifications, rubber hand gloves reusable type made of latex rubber and slip resistant texturing cover palm as per technical specifications, wheeled waste bin with pedal opening capacity-60 ltr as per technical specifications, waste bin with pedal opening capacity- 10 ltr as per technical specifications, snake catcher stick, heavy duty, length 6 feet , metal : aluminium, as per technical specifications, safety shoes as per technical specifications, gum boot pvc yellow sole gum boot with steel toe and flexible pvc as per technical specifications, rain coat as per technical specifications, dangri one pieces as per technical specifications, fire alarm siren range 1 km single phase 220/250v as per technical specifications, locks size 60 mm ss body, 7 lever as per technical specifications, convex mirror road safety (32 inch) as per technical specifications, waterproof umbrella (47 inch) as per technical specifications, 16 feet aluminum telescopic ladder as per technical specifications, cobweb duster (3-stage aluminum telescoping pole,extendable reach 20 feet ) as per technical specifications, multifunctional tool storage box as per technical specifications, brass earthing chain (9 mtr) as per technical specifications, static discharge rod as per technical specifications, loto kit as per technical specifications, standard welding safety goggle as per technical specifications, high pressure spray pump as per technical specifications, electric ulv fogger (16 liter) as per technical specifications, aluminium 7 feet aluminum self support ladder as per technical specifications, wet & dry extractor professional vacuum cleaner as per technical specifications, professional heat gun as per technical specifications, cable operated scrubber drier as per technical specifications, high pressure cleaners as per technical specifications, grinding and cutting safety shields as per technical specifications

Central Government/Public Sector

CTN :44697891

13 Apr, 2026 10.00 Lacs

Nellore - Andhra Pradesh

Tender For supply of carom board with coins , safety harness , night vision goggles

corporations/Associations/Others

CTN :44662016

31 Mar, 2026 NA

Ahmedabad - Gujarat

Tender For corrigendum : auction sale of scrap-reinforcement steel bellow 1 mtr,scrap-iron dust,scrap miscellaneous ms,scrap-ms shinso linner beamand plate,scrap-ms shinso linner beam and plate,scrap safety items belt from works / products safety harness,scrap binding/straping waste wire,scrap prestressing strand,scrap electrical plug top,scrap earth clamp,scrap ms diviator pipe,scrap led light fitting

Safety Harness Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors