Latest safety shoe Tenders | Government safety shoe Tenders

State Government

CTN :42444734

03 Nov, 2025 NA

Sundernagar - Himachal Pradesh

Tender For supply of safety shoes for larji hep.alout.

State Government

CTN :42385820

30 Oct, 2025 NA

Kolkata - West Bengal

Tender For supply of safety shoes - leather with pvc sole

Central Government And Public Sector

CTN :42433365

03 Nov, 2025 NA

Alipurduar - West Bengal

Tender For supply of electrical safety shoe

Central Government/Public Sector

CTN :42374841

08 Nov, 2025 2.59 Lacs

Udyogamandal - Kerala

Tender For supply of industrial safety shoes is 15298

Central Government/Public Sector

CTN :42377006

08 Nov, 2025 8.97 Lacs

Pondicherry - Pondicherry

Tender For custom bid for services -calibration services; annual maintenance contract (amc) for ground support equipment (gse) and electrical equipment held with icgae puducherry and 848 sqn (cg) shall cover the following salient features: - 1. to maintain all the gse in good working /serviceable condition at all times as per appendix a , b & c 2. one supervisor (diploma equivalent) along with 01 labor technicians to be placed at coast guard air enclave for the daily routine/ monitoring of amc jobs on gse. 3. replacement of all consumables including various graded oil, seals, filters, belts, pneumatic hose, wheels & rubber beading etc. at seller cost as per scope of work / scheduled of requirements. the consumables and oil should be oem specified wherever applicable and for other cases locally available standard quality item which has been checked and cleared for use by station qa cell. 4. painting of gse twice a year in yellow colour paint (two times in entire contract) as per cgae directives after complete removal of old paint to the bare metal and application of new paint up to 50 m on appendix- a s/l-40, 41 and appendix- b s/l 01-04 & 8. painting is not to be undertaken on nuts, bolts, screws and it is to be applied with only approved grease. 5. recharging of nitrogen cylinder (max. 3000 psi with 99.9% purity n2) as mentioned below from central/state govt certified local agency/govt agency with documentary proof for records post n2 charging. hst of cylinder & lp compressor are also to be carried out whenever due with documentary proof. 5.1 appendix- a s/l-02:- 5-6 times per year, max. 3000 psi with 99.9% purity n2 as and when cylinder pressure is less than 500 psi. 5.2 appendix- a s/l-17:- (portable tyre charging rig) 4 times per year. 6. calibration of gauges fitted on gse to be carried out from nabl certified labs as mentioned in appendix a , b & c and certificate to be provided. 7. the scope of works shall include the repairs/ servicing of all the component/equipment of gse including consumables/spares (required for repairing/servicing) the amc firm will bear the cost of repairs of equipment limited to 10% cost of contracted value . 8. in case unit is not satisfied by the service provided by the firm, amc will be terminated after giving warning letter/ notice of one month. it is to be clearly understood that during the grace period of one month, firm will continue to provide services. 9. if the defect / fault is not rectified within 72 hours of its occurrence, this unit deliberate will reserve the right to deduct the proportionate amount for the unserviceability period. 2 10. all the personnel employed for maintenance duty are to be in possession of the following: 10.1 aadhar card and company identity card. 10.2 no police case/vigilance case certificate. 10.3 two sets of uniforms with name of firm embossed/ embroidered on uniform for ease of identification. 10.4 safety shoes, safety gloves, safety helmet, safety goggles of standard quality to be provided to all persons. 11. safety and security of the personnel employed is the responsibility of the firm and any minor or major injury occurring to the individual is not the responsibility of the cgae puducherry or 848 squadron personnel. 12. working hours of the personnel are from 0900-1730 hrs (06 days in week) and they are to provide their contact number to the respective section in charge of gse for contact.

Central Government And Public Sector

CTN :42423118

14 Nov, 2025 12.87 Lacs

Chamba - Himachal Pradesh

Tender For supply of 309 mo-15 4.0 mm , welding electrode ss e-309, mo- 15, size 2.5mm , hose clamp 0.5 inch , pneumatic hose pipe 1 rubber , plastic tarpaulin size 18x30inch , plastic tarpaulin 12ft x 12ft , tap set with adjustable handle 6 to 24mm , metric tap hss m16x2 set of 3 , tap set 22mm set of 3 , tap set 24mm set of 3 , drill bit 2mm hss , drill bits, 4mm hss , drill bit, 6mm hss , drill bit, 8 mm hss , drill bits, 10mm hss , drill bit, 14mm hss , drill bit, 16mm hss , drill bit, 18mm hss , drill bit, 22mm hss , drill bit 28mm hss , drill bit 30mm hss , drill bit hss with carbide tip, straight shank, 3 mm dia. , drill bit hss with carbide tip, straight shank, 5 mm dia. , drill bit hss countersink 1-1by2inch taper shank for sink hole , drill bit hss 16x2mm tapershank spiral flute taping , drill bit, spiral fluted tapping 22x2.5 mm hss, tapper shank , drill bit, spiral fluted tapping 24x3 mm hss, tapper shank , tungsten carbide brazed tip crancked turning and facing lathe tool bit 10mm length 100 mm set of 11pcs , tungsten carbide brazed tip for lathe machine , spring caliper inside outside divider 8inch set of 3 , ball pin hammer 500gm , chipping hammer , allen key 3by8 inch size , allen key 10mm size , allen key set sizes, 1.5mm to 10mm , slide wrench 12inch , slide wrench 15inch , round file 12 inch rough , file full round 12inch smooth , file half round rough 10 inch , file half round smooth 12 , file flat rough 12 , file flat smooth 12 , impact hex allen bit socket 3by8inchx1by2inch square drive female , impact hex allen bit socket 10mm x 1by2inch square drive female , chiesel 6 inch , chiesel 8 inch , screw driver kit consisting of 8 screw drivers , combination plier 8inch , long nose plier 215mm , wire stripper and cutter , spirit level 300mm 0.5mm accuracy magnetic , steel metal a-z alphabet letter and 0-9 number punch mark stamp , oxyzen regulator double stage , da regulator double stage , gas cutting torch , gas hose-oxyzen cylinder , gas hose-da cylinder , cutting wheel 355x3x25.4 mm , ball valve 3by4inch ss , welding holders 600amp , grease gun bucket type 10kg capacity , electric paint spray gun 750wby950mlby2.5mm nozleby32000rpm , black paint , white paint , yellow paint , blue paint , alluminium paint , smoke grey paint , epoxy coal tar paint black , epoxy primar coat gray base , red-oxide primar for enamel paint , p. o. red paint , thinner for epoxy paint , turpentine oil tarpin oil , painting brush 2inch , painting brush 3inch , painting brush 4inch , painting brush 5inch , twisted knot wire cup wheel brush 3inch , wire brush , anticorrosive solution wd-40 , rubber solution 200ml , loctite bonding 495, 20 ml vial , loctite 577 thread sealant 50ml , loctite 262 thread locker 50ml , m-seal gp epoxy compound , taflon tape , caution red tape polyster, 250 mtrs length , nylone rope 1inch , nylone rope 1by2inch , steel wire rope sling plain loop eye at both end rope size 24 mm length 3m , polyster endless round sling capacity 5 ton 8 mtr long , polystr nylon endless round sling 2 ton 5 mtrs , line tester length 130mm , rechargeable havy duty 10w led torch with emergency light , scissors 12inch , measuring tape 5 mtr , measuring tape 30mtrs , packing tape brown 2inch , steel scale 12inch , soap //bid details 2 / 112 125 gm , battery 1.5v dry cell , battery 1.5v iec lr-14 , permanent marker black , permanent marker red , permanent marker white , cotton waste , duster cloth , gum boot size 6 no , gum boot size 7 no , gum boot size 8 no , gum boot size 9 no , rubber hand gloves pair , welding gloves , cotton hand gloves , welding gogles , grinding goggle , face shield for welding works , industrial raspiratery protection mask dustbymist , safety belt full body with rope hook and shock absorber , hot oil protection suit , carbon brush for magnetic drill machine model swc-50 15.8x20x6.2, 220v , armature for magnetic drilling mc model swc-50 1500wby220v , ball bearing 6006 zz , wire rope pully block 5 ton rope dia 22 mm , bal

Central Government/Public Sector

CTN :42423512

08 Nov, 2025 2.59 Lacs

Udyogamandal - Kerala

Tender For industrial safety shoes

CTN :42349998

03 Nov, 2025 NA

Jamnagar - Gujarat

Tender For procurement of misc office itmes under cwe aor d d - mobile compactor , pad lock , yoga mat , flower pots , anti- mosquito racket , glass jar , white board , telescopic pointer , tool bag , hd hand gloves , safety gum boot , rain coat , tds meter , ph meter , digital earth risistance tester , fire extingusher , grass cutter machine , electric bitumen , ladder , safety helmet , allen key set , torch light search light , measuring tape , ro , chair writing as per model specification , desk without chair as per model specification ) /bid number : gem/2025/b/6782599 * /dated: 17-10-2025 & & / bid document 1 / 29

State Government

CTN :41588375

04 Nov, 2025 NA

Rupnagar - Punjab

Tender For corrigendum : supply of safety shoes - leather with pvc sole (q3) , industrial and protective rubber knee and ankle boots (v2) as per is 5557 (q2)

CTN :42374737

03 Nov, 2025 NA

Jalgaon - Maharashtra

Tender For supply of electrical safety shoe with low ankle. size: 5 to 12. black colour details specification as per ann

Safety Shoe Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors