Latest safety shower Tenders | Government safety shower Tenders

CTN :45455729

10 Jul, 2026 NA

Sibsagar - Assam

Tender For corrigendum : supply of personal protective equipment (ppe), electrical and mechanical safety items and safety detecting devices for various power plants of assam power generation corporation limited (apgcl). - supply of safety items, safety helmet (white colour), safety helmet (grey colour), safety helmet (yellow colour), safety helmet (blue colour), safety helmet (green colour), safety helmet ( red colour), safety electrical gloves 33 kv, safety electrical gloves 430 v, natural rubber gloves (chemical resistant), rubberized cloth apron chemical (acid/alkali) resistant, disposable latex gloves (in pairs), safety ear plug, safety belts mechanical, raincoat with reflector ( high quality and full set-pant and coat type), safety face shield, welding safety gloves, mechanical hand gloves ( heat and strain resistance), safety lifebuoy ring for operation and maintenance personnel at dam, life jacket for operation and maintenance personnel at dam, frp electrical rescue rods, safety glasses/goggles, welding face shield (could be attached with any standard helmet), gum boot number 5, gum boot number 6, gum boot number 7, gum boot number 8, safety shoes (number 4 ), safety shoes (number 5), safety shoes (number 6), safety shoes (number 7), safety shoes (number 8), safety shoes (number 9), safety shoes (number 10), warning/caution tape (100 m piece each), barricading cones with reflective tape, safety net (size: 10m x 5m), raincoat with reflector, gown type, size: m, raincoat with reflector, gown type, size: l, raincoat with reflector, gown type, size: xl, raincoat with reflector, gown type, size: xxl, reflective vest green (size: xxl), reflective vest green (size: xl), reflective vest red (size: xl), reflective vest orange (size: xl), portable gas detector (hc, o2, h2s, co, lel, methane), high rising extension aluminium ladder 20 feets, high rising extension aluminium ladder 30 feets, non contact high voltage detector with insulating rod, non contact high voltage detector (wrist type), foldable stretcher, safety shower and eye wash, arc flash suit, safety belt for electrical works

Central Government And Public Sector

CTN :45703595

17 Jul, 2026 NA

Damanjodi - Odisha

Tender For supply of safety shower

CTN :45645945

25 Jun, 2026 NA

Kolkata - West Bengal

Tender For procurement and provisioning supply of hull outfitting items for multi-purpose vessel project, grse yard nos. 3059 - 3062 - base plate for stanchion type-i & ii, 80x40x3.2 rec hollow sctn astm-a-501gr.b, 80x40x3.2 rec hollow sctn astm-a-501grb, "50x50x6 mm ms angle 15:2062, gr b42.2x4.85 smless st pipe astm-a-106-b65nb carbon steel sleeve219.100x8.18tk smls st pipe astm a106g-bseamless pipe 32nbplug for bpwi type drain plugot manhole cover co600x400 (do type)22x22 square bar to gr. e2508050x50x6 mm ms angle is:2062, grb", flanges ms 150nb & stub end, gaskets, 50 nb striking plate m.s. (galv), bonb cs doubler penetration piece pn 10, 150nb cs doubler penetration piece pn 10, 250nbx150nb, steel reducer, 200 nb steel elbow, 90° (sr), 32nb carbon steel slip on flange pn 10, 200nb carbon steel sleeve, 32nb carbon steel sleeve, 200nb carbon steel sleeve, 32 nb gasket/'o'ring neoprene ruber, 15 nb sch. 40 galv seamless steel pipe, 15nb carbon steel sleeve, seamless pipe 168.3mm od x 8mm(150nb), seamless pipe ss 304, 80 nb, dn150 (160) pe100 pipe pn10, 150 nb steel elbow,90° (lr), 80 nb steel elbow 90° (lr) sch 80, 150nb ss316l slip on flange pn 06, bonb carbon steel slip on flange pn 10, loose pipe adapter flange brass wld ring, backing flange 32 o/d-spare-ro plant, dn150 (160) coupler pe100 pipe pn10, 250nex150nb, steel reducer, bonb cs doubler penetration piece pn 10, 50 nb striking plate m.s. (galv), seamless pipe ss 304, 80 nb, 42.2x4.85 smless st pipe astm-a-106-b, 00 nb steel elbow 90° (lr) sch 80, bonb carbon steel slip on flange pn 10, 25mm nb ms slip on flange (com. code-713, dn65 cs slip on flange pn 10 en1092-1, bonb carbon steel sleeve, bonb carbon steel sleeve, obs 65nb gasket, obs 25nb gm pr. reducing v/v flng gasket, 65x65x8 mm ms angle is:2062, gr 'a", *50x50x6 mm ms angle 15:2062, gr, 22x22 square bar to gr. e25080, plug for bpwi type drain plug, 22x22 square bar to gr. e25000, 19mm dia round bar to gr. e25080, flush lashing pots cargo lashing swl-25t, "50x50x6 mm ms angle is:2062, gr b42.2x4.85 smless st pipe astm-a-106-865nb carbon steel sleeveseamless pipe 32nb32nb carbon steel slip on flange pn 1032nb carbon steel sleeve32 nb gasket/o'ring neoprene ruber15 nb sch. 40 galv seamless steel pipe15 nb steel elbow, 90° (lr)15nb carbon steel sleeveseamless pipe 168.3mm od x 8mm(150nb)seamless pipe ss 304, 80 nbdn150 (160) pe100 pipe pn10150 nb forged socket end 90 deg elbow150 nb steel elbow,90° (lr)80 nb steel elbow 90° (lr) sch 80150nb ss316l slip on flange pn 0680nb carbon steel slip on flange pn 10loose pipe adapter flange brass wld ringbacking flange 32 o/d-spare-ro plantdn150 (160) coupler pe100 pipe pn10150 nb pipe support clip(com.code-793264150 nb pipe support clip(com.code-79326432 nb gasket/'o' ring neoprene ruber15 nb sch. 40 galv seamless steel pipe15 nb steel elbow,90 (lr)", 15nb carbon steel sleeve, seamless pipe 168.3mm od x 8mm(150nb), seamless pipe ss 304, 80 nb, dn150 (160) pe100 pipe pn10, 150 nb forged socket end 90 deg elbow, 150 nb steel elbow 90° (lr), 80 nb steel elbow 90° (lr) sch 80, 150nb ss316l slip on flange pn 06, bonb carbon steel slip on flange pn 10, loose pipe adapter flange brass wld ring, backing flange 32 o/d-spare-ro plant, dn150 (160) coupler pe100 pipe pn10, 250nex150nb, steel reducer, 150nb cs doubler penetration piece pn 10, bonb cs doubler penetration piece pn 10, 50 nb striking plate m.s. (galv), flanges ms 150nb & stub end, gaskets, 125 nb seamless black pipe, 7300x5.2thk smls st pipe astm-a106g-b, 7300x5.2thk smls st pipe astm-a106g-b, 250nex150nb, steel reducer, 65 nb steel elbow 90° (lr), 65 nb steel elbow 90° (lr), 125 mb steel elbow, 90° (sr), 125 mm nb ms slip on flange (com. code, dn65 cs slip on flange pn 10 en1092-1, 125nb carbon steel sleeve, 65nb carbon steel sleeve, 50 nb striking plate m.s. (galv), obs 65nb gasket, 60.300x3.9thk smls st pipe astm-a106g-b, 250nbx150nb, steel reducer, 50 nb steel elbow 90° (lr) sch 80, sonb carbon steel slip on flange

State Government

CTN :44780294

07 Jul, 2026 12.03 Lacs

Ukai - Gujarat

Tender For corrigendum : providing & fixing safety showers and sintex tank including other miscellaneous civil works at various locations of unit 3 to 6 at tps ukai tps.(wt-5152 civil ph)

CTN :45606733

27 Jun, 2026 1.93 Lacs

Malda - West Bengal

Tender For procurement of materials and repairing of pump house, internal wiring at fatepur-i hdtw( ml no 238) mouza, jl no 35, plot no 634, fatepur-ii hdtw( ml no 3) jl no 35, plot no 78 under fatepur mouza, at old malda block, malda. - procurement of materials, c.i. sluice valve with hand wheel, 151marked,15:14846. ) 150 rnrn dia. (sor wrdd ch)13.00 rates of materials for the program 2021-2022 item no-18a) page- 3), 150 mm dia ms plate flange ( rate approved by se dated 14.05.2020), repairing of pump house, stripping off worn out plaster and raking out joints of walls, celings etc. up to any height and in any floor including removing rubbish and stacking anywhere within the compound as directed., dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m in ground floor including roof. (a) up to 150 mm. thick, dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m. a) in ground floor including roof, single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand., cement concrete with graded stone ballast (40 mm size) excluding shuttering in ground floor. (a) pakur variety a) 1:3:6 proportion, hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood plank of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (upto roof of ground floor) (a) 25 mmto 30 mm thick wooden shuttering as per decision and direction of engineer-in charge., reinforcement for reinforced concrete work in the all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial strightening and removal of loose rust (if necessary), cutting requisite length, hooking and binding to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) for works in foundation, basement and upto roof of ground floor /upto 4 m. ( i ) tor steel/mild steel. ii. jsw/jspl/shyam/srmb/ bmasl/elecrosteel/ssl, ordinary cement concrete (mix 1:1.5:3) with graded stone chips ( 20 mm down ) excluding shuttering and reinforcement. if any,in ground floor. as per is 456-2000. a) pakur variety (rate analysis), plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surface, including throating, nosing and drip course where necessary (ground floor)(b) with (1:4) cement mortar. (ii) 15 mm thick plaster, neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc., artificial stone in floor, dado, staircase etc. with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners and including application of cement slurry before flooring works, using cement @ 1.75 kg/sq.m all complete including all materials and labour. in ground floor. 3 mm thick topping (high polishing grinding on this item is not permited) with ordinary cement. (iii) 25 mm thick, applying interior grade acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive distemper/ acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the eic. (in ground floor)applying interior grade acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive distemper/ acrylic emulsion paint

CTN :45338041

27 Jul, 2026 NA

Kharagpur - West Bengal

Tender For corrigendum : supply of striking plate as per drawing no-1209-09 .433-063 [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45433955

25 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of stainless steel safety shower

Central Government/Public Sector

CTN :45454281

17 Jun, 2026 NA

Kota - Rajasthan

Tender For supply of doorway striking plate (top)(without hole) for bogie coverd wagon as per rdso drawing no. wd-90030-s-63, alt-6 or latest item no. 5 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

CTN :45369535

12 Jun, 2026 14.61 Lacs

Kheda - Gujarat

Tender For installation of new chlorination plant and chlorine cylinder transportation including necessary accessories providing and fixing of 3 mm thick ms sheet metal approx red colour with upper fiber coating for neutralizing pit installation of fire safety system safety shower with eye wash fountain and other miscellaneous items at alina head works and raipura head works under m and r to khijalpur rwss taluka mahudha and thasra district kheda