Latest safety tank Tenders | Government safety tank Tenders

Central Government/Public Sector

CTN :45343200

02 Jun, 2026 NA

Ratlam - Madhya Pradesh

Tender For auction sale of others - released condemned and u/s abandoned steel water tank consisting, {(i) ms scrap, qty- 4.275 mt approx, (ii) g.i pipes, qty- 0.154 mt approx}, total qty- 4.429 mt approx, location- swd station. mode of delivery by actual weighment basis and on as is where is basis, cutting permitted, custodian- sse-works-dadn, fdp- 50 days. note- (1) hidden items are not included in the jvr, it found this hidden items and other items not included in jvr party should be handed over to the custodian before delivery. (2) inventory taken upto ground level. (3) hidden items are not included in the auction. (4) non ferrous item if any not included in this lot.,(5)the eligible bidder shall prepare and submit the detailed dismantling scheme including methodology, safety precautions, sequence of dismantling, equipment to be used and traffic/safety arrangements to sectional sr. den/den through sr. dmm. (6) dismantling shall be permitted only after approval of dismantling scheme by the sectional sr. den/den.

Central Government/Public Sector

CTN :45326064

08 Jun, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of rolling stock - condemned bg 8 wheeler non-ac coaches with all available ferrous-non ferrous-wooden fittings thereon but excluding the following reclaimable items-mechanical rc items- 1) centre buffer coupler complete set, 2) aluminium water tank. coach numbers- 1) special repair wgscn 034059, 2) special repair wgscn 066263, = 2 coaches, ds8 no: 023280-25-19811 dt 28.02.2026 (232875 dt 28.02.2026) ,pl.no. 98111061 location: tondiarpet marshalling yard, custodian: sse/c&w/tnpm, note: 1) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government.d and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government,2) all rc items should be handed over to custodian at respective locations,3) bio toilet to be defaced before delivery.4) rate per number should be quoted,5)coaches are in grounded condition (bogies and wheel sets removed ). 6)cutting permitted to loadable sizes only, 7) crane/jcb loading is permitted. (8) purchaser should take safety precaution while cutting/delivery of coaches.

Central Government/Public Sector

CTN :45326066

08 Jun, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of rolling stock - condemned bg 8 wheeler non-ac coaches with all available ferrous-non ferrous-wooden fittings thereon but excluding the following reclaimable items-mechanical rc items- 1) centre buffer coupler complete set, 2) aluminium water tank, 3) buffer plunger with buffer casings complete set (sl no 1 only). coach numbers- 1) wr gslrd 017041/c, 2) special repair gs 034051/c, = 2 coaches, ds8 no: 023280-25-18930 dt 11.02.2026 (232870 dt 10.02.2026) , pl.no. 98111061 location: tondiarpet marshalling yard, custodian: sse/c&w/tnpm, note: 1) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government.d and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government,2) all rc items should be handed over to custodian at respective locations,3) bio toilet to be defaced before delivery.4) rate per number should be quoted,5)coaches are in grounded condition (bogies and wheel sets removed ). 6)cutting permitted to loadable sizes only, 7) crane/jcb loading is permitted. (8) purchaser should take safety precaution while cutting/delivery of coaches.

corporations/Associations/Others

CTN :45345524

15 Jun, 2026 10.97 Lacs

Sonbhadra - Uttar Pradesh

Tender For supply of oh of main steam line valve v2 6 , oh of steam by pass valve v2 27,15, and v2 7 , oh of es 3,4,5,6 and 7 , oh of v2 -82-84 and v2-81-a to 81c , oh of hd-21, hd-29, hd-30 and hd-31 , oh of nrv of h.p. heater and feed pump , oh of group protection valve of hph , oh of dw-4, 37,38,39,40,41 and ca 5 , oh of cst makeup valve v6 60 , oh of as-48 valve , oh of nrv of extraction line es-8 , oh of suction valve of bfp , oh condensate wtr throw off valve to condenser , oh throw off valve to cond and steam isolating of lph2 , oh of steam isolating valve of lph 3, 4 , oh of safety valve of aux prds or deaerator , oh of safety valve of h.p. heater , oh of safety valve of l.p. heater. , oh of safety valve of cbd tank. , oh of safety valve of flange or stud heatng , oh of safety valve of warm up line. , overhauling of actutator of as 48 valve , oh of actr feed line valvev2 81 or v2 82 or v2 83 or v2 84 , oh of actr of v2 7 or v2 15 or v2 27 , oh of actr drip line valve and ext line valve , oh of actr valve connected to condenser , oh of actr cst make valve , oh of actr of msv l and r , oh of actr of steam isolating valve to lph2 to 4 , oh of actr steam throw off valve to condenser , cut or weld or repl of hp valve 15 to 50mm , cut or weld or repl of hp valve 51 to 100mm , cut or weld or repl of h p valve 101 to 150mm , oh of butterfly valve of condenser , oh of dea and fst with internal painting , repair or replacement of broken hanger , tightening of loose hangers , cut or weld or repl of l.p. valve 15 to 50mm , cut or weld or repl of l.p. valve 51 to 100mm , cut or weld or joint of h.p. pipe 15 to 50mm , cut or weld or joint of h.p. pipe 51 to 100mm , cut or weld or joint of h.p. pipe 101 to 150mm , cut or weld or joint of h.p. pipe 151 to 300mm , lift or straight aprds hdr by cutting weldding , o h of lph 1a , 1b , o h of lph 2 3 and 4 , oh and attend flange leakage of gc i or ii , clean of turbine oil or h2 gas cooler str , repl of damaged sp. valve v2 38 , repl of damaged special valve v2 27 , oh of turbine oil coolers , oh of main ejectors of turbine , oh of h.p. heater , oh of lcv 3to15pcv-5, 14,16,17,tcv 8 , repl bend of lp drip connected to drip pump or condenser , cut damaged bend of hph drip cont to dea , cut weld or repl of h.p. valve 151 to 300mm , blank of crh line for ht and normalizing , oh of h.p. valve nrv in h.p. line , oh of l.p. valve nrv , oh of energy absorber of bfp , oh of dss of aux. prds.

corporations/Associations/Others

CTN :45345600

17 Jun, 2026 14.56 Lacs

Sonbhadra - Uttar Pradesh

Tender For supply of oh of main steam line valve v2 6 , oh of steam by pass valve v2 27,15, and v2 7 , oh of es 3,4,5,6 and 7 , oh of v2 -82-84 and v2-81-a to 81c , oh of hd-21, hd-29, hd-30 and hd-31 , oh of nrv of h.p. heater and feed pump , oh of group protection valve of hph , oh of dw-4, 37,38,39,40,41 and ca 5 , oh of cst makeup valve v6 60 , oh of as-48 valve , oh of nrv of extraction line es-8 , oh of suction valve of bfp , oh condensate wtr throw off valve to condenser , oh throw off valve to cond and steam isolating of lph2 , oh of steam isolating valve of lph 3, 4 , oh of safety valve of aux prds or deaerator , oh of safety valve of h.p. heater , oh of safety valve of l.p. heater. , oh of safety valve of cbd tank. , oh of safety valve of flange or stud heatng , oh of safety valve of warm up line. , overhauling of actutator of as 48 valve , oh of actr feed line valvev2 81 or v2 82 or v2 83 or v2 84 , oh of actr of v2 7 or v2 15 or v2 27 , oh of actr drip line valve and ext line valve , oh of actr valve connected to condenser , oh of actr cst make valve , oh of actr of msv l and r , oh of actr of steam isolating valve to lph2 to 4 , oh of actr steam throw off valve to condenser , cut or weld or repl of hp valve 15 to 50mm , cut or weld or repl of hp valve 51 to 100mm , cut or weld or repl of h p valve 101 to 150mm , oh of butterfly valve of condenser , oh of dea and fst with internal painting , repair or replacement of broken hanger , tightening of loose hangers , cut or weld or repl of l.p. valve 15 to 50mm , cut or weld or repl of l.p. valve 51 to 100mm , cut or weld or joint of h.p. pipe 15 to 50mm , cut or weld or joint of h.p. pipe 51 to 100mm , cut or weld or joint of h.p. pipe 101 to 150mm , cut or weld or joint of h.p. pipe 151 to 300mm , lift or straight aprds hdr by cutting weldding , o h of lph 1a , 1b , o h of lph 2 3 and 4 , oh and attend flange leakage of gc i or ii , clean of turbine oil or h2 gas cooler str , repl of damaged sp. valve v2 38 , repl of damaged special valve v2 27 , oh of turbine oil coolers , oh of main ejectors of turbine , oh of h.p. heater , oh of lcv 3to15pcv-5, 14,16,17,tcv 8 , repl bend of lp drip connected to drip pump or condenser , cut damaged bend of hph drip cont to dea , cut weld or repl of h.p. valve 151 to 300mm , blank of crh line for ht and normalizing , oh of h.p. valve nrv in h.p. line , oh of l.p. valve nrv , oh of energy absorber of bfp , oh of dss of aux. prds. , 2coat paint bcw,clr,bfp,cep,drip pump and line , 2coat paint cst,bcw pump ,swc tank,line,valve , 2coat paint hcplg,sw,bcw,cw exc clr line , 2coat paint air washer sys,cep or phos orhyd , 2coat spray paint syn super enamel lpc , 2coat spray paint front ped,barring gear , 2coat spray paint brg and housing turbine , 2coat spray paint cntl valve casing , 2coat spray paint condenser and line , 2coat spray paint main oil tank , 2coat spray paint main ejector , 2coat spray paint centrifuging machine , 2coat spray paint lube oil cooler , letter writing 2 inch size dia

CTN :45325588

09 Jun, 2026 40

Multi City - Karnataka

Tender For procurement of cleaning materials for huskuru gp for the year 2026-27 - coco broom with 5 feet length only natural product to sweep the outdoor only, garbage cover small size, metal type big web stick16 to 24 feet length, small web stick 8 feet, metal dust pan, plastic dust pan, water jug normal size, plastic bucket, system herbicide glyphosate 41% sl, ammonium salt of glyphosate 71 % sg powder, grass cutter or weed cutter 4 stroke engine honda or other brand made company only 1 year motor warranty only without spares running petrol only, grass cutter or weed cutter 2 stroke engine with weed cutter 250meter wire 2sets of blades 1 year service warranty period without spares only china make only no brand petrol and oil running, with push cart set and 3phase honda motor and pump 100 meter flexible hose cable 2no spray guns 250 ltr capacity tank 1 year warranty for motor out of service is free up to 1year spare are chargeable, battery & manual sprayer to wear the back side 16ltr capacity tank no warrant for battery only service warranty 6months without spares only , giantbigfogging machine 1.9 ltr consumption ltr per hr chemical tank 5ltr capacity hand pump 3 to 4 time then cahrgeble battery running 1 year service warranty only with spares and labour charge are extra. to diesel and petrol running only, mini small fogging machine to spray for mesquites no warranty product to use diesel and mini gas can, the composition of malathion tech 5.0% based on 95% chain clay 10% soapstone, toilet cake or odonil fragrance of wash room purpose only, bamboo ladder, mop small cloth to use office table and chairs cleaning purpose only, clip mop set it use moping purpose to office only, apron, sodium hypo chloride, weed control chemical, mask branded, gum boots branded, pvc hand gloves 16 inches, coco broom, soft broom, toilet cleaning acid, malathion oil 5.0% e.c, pesticide (fogging chemical with water mix), fogging chemical (with fuel mix), black phenyl, white scented phenyl, alum crystal, malathion dust 5.0%e.c, bleaching powder 33% chlorine, safety helmets, sanitizer

CTN :45329993

09 Jun, 2026 373

Mandya - Karnataka

Tender For procurement of water suply items for the year of 2026-27 kothathi - pvc fiber 1.1/2pipe 10feet hand borewell, copper wire 2.5mm 90mtr, copper wire 1.5mm 90mtr, cable clamp, motor pump 6hp x 8 stg, winding wire 1.3 mm copper, winding wire 1.1 mm copper, winding wire 1 mm copper, pump 12stg, pump 8stg, motor repair charges 6 hp, motor repair charges 7.5hp, cable 3core 4 sq mm, cable 3core 2.5 sq mm, mn2 realy(14-23), auto.switch, preventer 7.5hp to 15hp, preventer upto 7.5hp, no push button, terminal block, r,y,b indicater lamp, volts.meter, amps.meter, start no push button, stop nc push button, overload realay, wiring.charges, motor repair.charges, start repair charges, lathe work fitting.charges, pump repair charges, motor lifting and eraction.charges, suction case set nbr, non slam check valve, pump shaft, teflon plate, couple, suction plate, bush(rubber+ stainlesss steel), suction, ss counter, setting sleeve, middle, bush seal, bush seal cover, impeller, diffuser, bowl, bowl bush, key, step sleeve, washer., hexbolt, square nut, patti (motor&pump), adaptor (motor&pump), pump nrv, stud, nut, safety valve, brackets, motor pipe, lamination, stator stack, body sleeve, motor shaft, rotor stack, copper lamination, pressure ring, balance ring, rotor assembly, upper.housing, grommet, connection piece, oil seal cover, oil seal rubbar, water bolt, sand guard, v-notch rubber, couple key, couple sleeve, stud ring, lock ring, bush, carbon bush, lower.housing, allen bolt, thrust bearing.plate, circlip lock, base, rocker support, rocker support nut, thrust bearing, thrust bearing segment, til-ting pad(trust pad), pcd cup, pcd plate, drain plug, stainer, cable.guard, winding wire 1.2 mm copper, boltnut 3/8, boltnut 5/8, insulation.tape, rewireable fuse 250 amps 415v, rewireable fuse 100 amps 415v, rewireable fuse 63 amps 415v, sada pannel board7.5hp to 15hp, d.o.l pannel board- 7.5hp to 15hp, sada pannel board 7.5 hp, d.o.l pannel board- 7.5 hp, hp7.5 x 12 stg pump, hp6 x 12 stg pump, hp10 x 12 stg pump, hp10 x 12 stg motor pump, hp7.5 x 12 stg motor pump, hp6 x 12 stg motor pump, plunger rod for hand pump borewell, bore hole casing for hand pump borewell, compression cone for hand pump borewell, riser pipe, bore well handle, cylinder for hand pump borewell, axcel for hand pump borewell, bearing for hand pump borewell, water tank for hand pump borewell, pedstail stand for hand pump borewell, nut & bolt for hand pump borewell, head for hand pump borewell, chain nut & bolt for hand pump borewell, baket washer for hand pump borewell, gi 1.25 inch copler/coller 32mm for hand pump borewell, connecting rod for hand pump borewell, gi 1.25 inch pipe for hand pump borewell, pvc tape roll, mrf tape, shalk threas, pvc 6inch cassing pipe, pvc 4.5inch cassing pipe, pvc 7inch cassing pipe, gi 6inch cassing pipe, gi 7inch cassing pipe, hacksaw blades 12x1/2x24t, garden pipe 1inch, garden pipe 3/4inch, lather nrv, electrofusion welding machine ef, hdpe 1.1/2inch pipe, hdpe 1.1/4inch pipe, hdpe 110mm pipe, hdpe 90mm pipe, hdpe 75mm pipe, hdpe 63mm pipe, hdpe(electrofusin fittings) 110mm tapping tee(belt type), hdpe(electrofusin fittings)110mm tapping tee (clamp type), hdpe(electrofusin fittings) 110mm end cap, hdpe(electrofusin fittings) 110mm reducer, hdpe(electrofusin fittings) 110mm equal tee, hdpe(electrofusin fittings) 110mm elbow 45, hdpe(electrofusin fittings)110mm elbow 90, hdpe(electrofusin fittings) 110mm copler/coller, hdpe(electrofusin fittings) 90mm tapping tee(belt type), hdpe(electrofusin fittings) 90mm tapping tee (clamp type), hdpe(electrofusin fittings) 90mm branch saddle(belt type), hdpe(electrofusin fittings) 90mm branch saddle(clamp type), hdpe(electrofusin fittings) 90mm end cap, hdpe(electrofusin fittings) 90mm reducer, hdpe(electrofusin fittings) 90mm equal tee, hdpe(electrofusin fittings) 90mm elbow 45, hdpe(electrofusin fittings) 90mm elbow 90, hdpe(electrofusin fittings) 90mm copler/coller, hdpe(electrofusin fitting

CTN :45322644

01 Jun, 2026 8.70 Lacs

Sawai Madhopur - Rajasthan

Tender For supply, installation, testing and commissioning of phase wire and street light and vairious electrical equipment needed for implementation of budget announcement 2025-26 - providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in, led street light fixture with minimum lumen output 5600 lm, sitc of ip-42 and general construction confirming to is:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:-(a)thickness of crca sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / without detachable extension type structure. removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided(b)complete panel shall undergo a process of degreasing, water rinsing, activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then powder coated with approved shade of minimum 70 microns on both side of panel. the panel having pe foam/ neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire.[c) interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar (>63 amp ) . control wiring will be carried out with 1.5 sq.mm, earth wire with 2.5 sq.mm and ct with 2.5 sq.mm flexible copper wire only. all joints / interconnections of copper bus bar shall be dully tinned . clearance between main bus bar and risers / metal parts shall be at least 10 mm additional to width of bus bar bus bar is insulated by heat shrinkable sleeves . earth and neutral bus bar shall be half of the size of phase bus bar. ( cost of bus bar / flexible wire for interconnection between main busbar and switchgear is to be paid extra )(d)wiring between components within switchgear and incoming / outgoing cable shall be done through the terminal block only. direct connection shall not be permitted. each terminal block shall be one piece moulded, barrier type, 650 volt grade, complete with washers, heads, studs with two nuts and identification strips and shall have adequate continuous current rating. for tap-offs, adjacent terminals with shorting strips shall be used. 10% spare terminal blocks shall be provided. wire identification on marking strip shall correspond to the designation of the wiring diagrams. all wire terminals on the equipment shall also be marked with designation corresponding to those of the wiring diagram.(e)all wiring shall be enclosed in plastic channels and neatly bunched and closed in metering chamber, wiring between terminals of various devices shall be point to point (no wire splitting or tee connections) with wires neatly trucked along the back of the panels, adequately supported to prevent sagging.(f)floor mounted panel sh

CTN :45328987

08 Jun, 2026 NA

Sealdah - West Bengal

Tender For - repairing of damaged electrical items and supply of different electrical maintenance materials at 44 iron side road rhe. - repair of existing damaged led tube light / led mirror light/ led cove light/ led surface mount+ down lighter light with necessary driver should matching with existing specification (t5 output_ 18w 20w, 240ma)i) driver only, ii) led strip only, supply of 4ft long led smart bright tube light fitting with led tube light .(make: philips-type: bn 021 led40s- 6500 psu gr (4 ft) or equivalent model of crompton/jaquar)., supply of single fancy wall bracket led light fitting (make - philips, model no-31453 or equivalent model of crompton/jaquar) incl. 1nos 9 w led lamp (make:-philips or equivalent model of crompton/jaquar). of warm white colour lamp complete with all accessories, supply of 15 watt led surface mount+ down lighter light fittings including all accessories and mountings complete set as per direction of eic(make- crompton, type-lcdspln-r-15-cdl/ philips/ jaquar), supply of led 7.5 watt mirror light fittings complete with lamp including & all other accessories (make :philips:type jojoba wall light, model no. 34034/14/86 or equivalent model of crompton/jaquar)], fixing of 3 module 2w, 3000k led foot light fittings. incl. s/f 3 module ms flush box in wall as per approval of eic/authority., supply of single led light 12w, 1200 lm, 10,000 life hours, cdl led lamp ( make : philips / crompton / jaquar ), supply of modular soket type 2 module regulator (brand approved by eic), supply of step type electronics fan regulator (brand approved by eic), supply & fixing 1200 mm ceiling fan(max 60w) complete with all accessories, down-rod etc. (except regulator) [make:orient new air plus/crompton/usha striker plus /havells (cat no-fhcss1sbrn48)/ as per approval of eic.], supply of 450 mm sweep cabin fan (make:orient tornado wall ii or equivalent model of cg/havells/other brand as per approval of eic/authority] on wall by s&f rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd., supply of 09 sweep a.c. exaust fan metal body with all parts.make-epc, type-p23009/4(make : havells / orient / epc), supply of 200 mm sweep, modular exhaust fan (max 32w) complete with all accessories, [make:havells ventil/crompton/usha / as per approval of eic.], supply of 10ltr geyser having storage ; capacity: 10 litres; wattage: 2000 watts; pressure: 8 bars ; bee rating: 5 star; waterproof degree : ipx-4 protection for longer product life. adjustable knob for temperature settings between 25 degree c to 75 degree c to get the desired temperature, multi-function safety valve which protects tank from internal and external pressure build up including hot & cold water distribution pipe line. warranty- 2yearsmake:- havells(type- monza)/ venus/ v-guard, supplying of 1.1 kv single core stranded fr 2.5 sqr mm pvc insulated & unsheathed single core stranded copper wire (brand approved by eic) 100 mtr coil, supplying of 240v 6-16a sp mcb of breaking capacity 10ka & c characteristics (make: l&k / legrand / crabtree), supplying of 240v 40a dp mcb isolator(make: l&k / legrand / crabtree), supplying of 240v 63a fp mcb isolator(make: l&k / legrand / crabtree), supplying of 2.5 mfd condenser (tibcon), add. g.s.t.@ 18% (on total from item no 1 to 20) to be calculated by bidder, add. lwc.@ 1% to be calculated (on total from item no 1 to 20 + gst@18%) by bidder