Latest safety tools Tenders | Government safety tools Tenders

Central Government/Public Sector

CTN :41446032

04 Sep, 2025 NA

Kurukshetra - Haryana

Tender For supply of raspberry pi5b 16 gb ram , raspberry pi a1 kit , 32 gb micro sd card , usb-c power supply , fan heat sink case , ethernet cable 1-2meters , micro-hdmi cable , network switch 8 pot , keyboard and mouse shared , projector , multi-purpose wire stripper and cutter , heat shrink tube 1mm, 2mm, 3mm, 4mm , isopropyl alcohol , bnc plug shorting cap 75 ohm , bnc plug shorting cap 50 ohm , bnc t-connector , sma t-connector , bnc l-connector , f- bnc to f-sma adapter , m-bnc to f-sma adapter , f-bnc to f- bnc adapter , m-bnc to f-bnc adapter , f-sma to to f-sma adapter , f-bnc to m-n-type adapter , f-sma to m-n-type adapter , aa and aaa batteries , bnc crimping tool , bnc - t adapter m-f---m , multipurpose screw driver set , plier

Central Government/Public Sector

CTN :41498473

09 Sep, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of supply of low maintenance lead acid secondary cell of 2volt, 300ah capacity at 10 hrs. rate of discharge, confirming to rdso specification no. irs-s-88/2004 with latest amendment, assembled with tubular positive and pasted negative plate in hard rubber containers or pp-cp container with one float guide sealed type and one micro porous vent-cum-filling plug, inter cell connector, nuts- bolts and washers confirming to rdso spec. no. irs-s 88/2004 in dry and uncharged condition without maintenance tool kit, as per para 8 of the specification irs-s-88- 2004 with latest amendment of low maintenance lead acid secondary ,make to power build ( t 300 - h lm) or similar

CTN :41318987

01 Sep, 2025 5.00 Crore

Jodhpur - Rajasthan

Tender For corrigendum : various laboratory items of m.m.n.n.j.y - paraffin wax 60-62 c with ceresin , no of qty.(1 kg.), absolute alcohol(ethanol), no of qty.(500 ml), distilled water , no of qty.(5 lit.), xylene, no of qty.(500 ml), spirit, no of qty.(10 liter ), cotton roll (item related to schedule-1 as per rtpp rules 2013, priority will be given to msme sector hence enclose msme certificate ), no of qty.(500gm), micro slides 75x23 mm thicknesss-1.25 to 1.5 mm(glass) , no of qty.(1 pkt.x50 slides), chloral hydrate , no of qty.(500 gm.), amonia solution , no of qty.(500ml), formaldehyde solution 40%, no of qty.(5 lit.), white adhesive tape , no of qty.(1 pkt.), microtome disposable blade high profile., no of qty.(1 pkt. (50 blades each)), filter paper round 100x1 pkt, no of qty.(1 pkt.), cassettes 3 cm.x2.5cm. (plastic) yellow, no of qty.(500 in no), cassettes 3 cm.x2.5cm. (plastic) white, no of qty.(500 in no), latex gloves sterilized 6.5/7.0/7.5 no., no of qty.(1 pair), latex gloves unsterilized 6.5/7.0/7.5 no., no of qty.(1 pair), dextrose, no of qty.(500 gm.), albumin powder, no of qty.(500 gm.), leishman stain, no of qty.(500 ml), sulphur powder, no of qty.(500 gm.), sodium acetate, no of qty.(500 gm.), potassium acetate, no of qty.(500 gm.), potassium nitrate, no of qty.(500 gm.), benedicts solution , no of qty.(5 lit.), acetone, no of qty.(500ml.), dpx solution, no of qty.(250 ml), cover slip 18x18 0.1 mm english glass, no of qty.(1 pack of 50), cover slip 22x22 0.1 mm english glass, no of qty.(1 pack of 50), cover slip 22x50 0.1 mm english glass, no of qty.(1 pack of 50), glycerine, no of qty.(500 ml), di ionized water, no of qty.(10 lit.), schiffs reagent, no of qty.(500 ml), bee s wax, no of qty.(1 kg.), cea (primary antibodies), no of qty.(7 ml), gfap (primary antibodies), no of qty.(7 ml), hmb 45 (primary antibodies), no of qty.(7 ml), desmin (primary antibodies), no of qty.(7 ml), ema (primary antibodies), no of qty.(7 ml), bcl2 (primary antibodies), no of qty.(7 ml), hmwck (primary antibodies), no of qty.(7 ml), ck7 (primary antibodies), no of qty.(7 ml), er (primary antibodies), no of qty.(7 ml), cd30 (primary antibodies), no of qty.(7 ml), cd5 (primary antibodies), no of qty.(7 ml), cd23 (primary antibodies), no of qty.(7 ml), ck20 (primary antibodies), no of qty.(7 ml), ki67 (primary antibodies), no of qty.(7 ml), cd10 (primary antibodies), no of qty.(7 ml), synaptophysin (primary antibodies), no of qty.(7 ml), pr (primary antibodies), no of qty.(7 ml), mpo (primary antibodies), no of qty.(7 ml), pax-5 (primary antibodies), no of qty.(7 ml), cd3 (primary antibodies), no of qty.(7 ml), wt1 (primary antibodies), no of qty.(7 ml), s100 (primary antibodies), no of qty.(7 ml), aei/ae3 (multi ck) (primary antibodies), no of qty.(7 ml), sma (primary antibodies), no of qty.(7 ml), inhibin (primary antibodies), no of qty.(7 ml), hpv (primary antibodies), no of qty.(7 ml), p16 (primary antibodies), no of qty.(7 ml), eber (primary antibodies), no of qty.(7 ml), lmp1 (primary antibodies), no of qty.(7 ml), c4d (primary antibodies), no of qty.(7 ml), amyloid (primary antibodies), no of qty.(7 ml), her 2 neu (primary antibodies), no of qty.(7 ml), vimentin (primary antibodies), no of qty.(7 ml), chromogramin (primary antibodies), no of qty.(7 ml), antigens retrival buffer diva decloaker 20x (for manual ihc staining), no of qty.(250 ml), background snipper (for manual ihc staining), no of qty.(25 ml), wash buffer tbs autowash buffer 40x (for manual ihc staining), no of qty.(250 ml), hrp polymer detection kit (for manual ihc staining), no of qty.(25 ml), polylysine coated slides (for manual ihc staining), no of qty.(1 x 50), peroxidaxed block 1 (for manual ihc staining), no of qty.(500 ml), betazoid dab chromogen (for manual ihc staining), no of qty.(2 ml), betazoid dab substrate buffer (for manual ihc staining), no of qty.(25 ml), cryomatrix (optimal cooling tool gel coolent)(for cryostate), no of qty.(1 x 120 ml), sarasil disinfect

CTN :41425211

23 Aug, 2025 NA

Bangalore - Karnataka

Tender For supply of precision screwdriver set phillips flat hex , allen key hex wrench set metric , electric soldering iron with fine tip , solder wire with rosin core , soldering stand , paste flux , heat gun for heat shrink tubing , wire stripper and cutter , ferrule crimping tool kit for connectors , tweezers , needle nose pliers , auto multimeter , callipers for measuring components , double sided tape or mounting foam , zip ties various sizes , electrical tape and kapton tape , thread locker medium strength removable , ruler or measuring tape , spirit level , anti-static mat and wrist strap , usb to micro usb type b or usb c cable , sd card reader , portable tool kit , lithium polymer battery balance charger , lithium polymer battery checker , propeller balancer , velcro straps , landing gear or skids , vibration dampers , flight controller autopilot , power distribution board pre soldered connectors , gps module with compass , voltage current sensor 30a , telemetry modules 433 mhz or 915 mhz , brushless motors bldc match kv rating , electronic speed controller 30a bldc x 4 , propellers clockwise and counterclockwise multiple sets , propeller adapters or nuts , lithium polymer batteries match voltage and c rating , battery connectors xt60 xt90 , battery straps , screws with nuts various sizes m2 m3 m4 , standoffs and spacers , mounting foam for flight controller and sensors , heat shrink tubing various diameters , buzzer and status led , servo cables , jst connectors 2 3 4 5 6 pin , jumper cables dupont wires male-female male-male female-female , dupont connector

Central Government/Public Sector

CTN :41054038

08 Sep, 2025 NA

Lucknow - Uttar Pradesh

Tender For corrigendum : supply of low maintenance lead acid secondary cell, type of 2v - 80ah with tabular positive and pasted negative plates ,assembled in transparent container (polypropylene )/ hard rubber container w ith one micro porous vent -cum sealed float guide with inter cell connectors,bolts,nuts and washers ,in dry and uncharged conditions as per specification rdso, irs: s- 88/2004 or latest nb one tool kit is to be supplied with12 nos each battery as per clause 8 of the spec.irs s-88/2004 [ warranty period: 3 0 months after the date of delivery ]

State Government

CTN :41105671

18 Aug, 2025 92.76 Crore

Jalna - Maharashtra

Tender For corrigendum : supply of electrical safety tools and personnel protective equipment for technical employees under jalna circle

CTN :41136116

16 Aug, 2025 NA

Ernakulam - Kerala

Tender For supply of 17 awg type m112 enameled copper wires 2.12 mm , hall effect sensors p3144 , n-channel power mosfets n105 , mosfet n9 heatsinks 31x10x20 mm , high speed mosfet drivers mc3411 , 1k to 10k ohms c3 type pulldown resistors , k6 series momentary switch 6x6x5 mm , capacitor 0.1 micro f gate capacitance, type p443 , standard aluminum g9 extrusion bar 1200 mm, sledge type , t-nuts, screws, washers a6 type, 12mm , 12 v 400microf d7 type supercapacitor , power distribution bus bars 20v with cover, m117 type , marine grade c4 plywood 10-15mm, hardwood , permanent magnets type y955h, 30x20x5 mm , m6 type stationary kit diy crafting, multicolor , b2 type painting tool kit multicolor, for wood material , 2.2 ghz 2ch rc airplane model 6.5x8.3x3.9 inch, h17c type , small red c3 grade led lights 12v, 2.5mm , arduino mega 7560 c3 model, 256 kb , tft touch display 4.2 inch, 320x480 resolution, 150mw, j6 series , tft lcd mega shield 2.4 inch, 320x240 resolution, 120mw, j9 series ) /bid number : gem/2025/b/6392928 * /dated: 19-07-2025 & & / bid document 1 / 21

CTN :41314739

14 Aug, 2025 NA

Ranga Reddy-T - Telangana

Tender For supply of electronic training kit for cockpit recording with debrief system : : - go pro debrief system , utility tool , go pro 11 mini camera , micro sd card 512 gb , go pro camera mount

CTN :41256073

21 Aug, 2025 NA

Mohali - Punjab

Tender For supply & installation of lab equipment for aicte-idea lab at chandigarh engineering college-cgc, landran, mohali-, laser cutter, 2, vinyl cutter, 1, 3, 3d printer, 1, 3d scanner, 1, 4, cnc router, 1, mini desktop lathe cum milling, 1, drilling m/c 1 hp motor, , handheld high speed drilling m/c-15000 rpm with accessories - 2 nos., benchtop grinder machine, solder stations (5 nos.), desoldering m/c, advanced, motorized sewing machine, wood lathe, power tools, portable welding m/c, refrigerator, normal and microwave oven, magnifying glass with stand-2 nos., digital microscope, , digital storage oscilloscope, 1, signal generator, 1, variable power supply, 1, benchtop multimeter, 1, projector, 1, heavy duty laser printer, 1, pcb milling machine", 1, pcb prototype machine, computer workstation in networking- 5 nos., quardcopter assembly kit, 1, 5, 1, smart board, 1, relay module, electric bicycle motor & access, granite surface plate, vacuum cleaner, hot air gun-5 nos., measuring equipment [vernier calliper (0-200/0.01),, vernier height gauge (0-1000mm), micrometer 0-50, 50-100/0.001 inside and outside)], metal scale etc., fire extinguisher, first aid box, digital multimeter (5 units), clothes iron (5 units), electronic component repository (lcr meter, variac etc.), 3d printer filament (depending on the printer, 2 rolls), acrylic sheets (2mm,3mm, 4mm, 5mm all of area 8ft x 4ft) 2 sheets each, foam sheets (krum, 10mm, 12mm, 15mm all of area 8ft x 4 ) 2 sheets each, ply boards (8mm, 12 mm, 18mm, all of area 8ft x 4ft) 2 sheets cach, nylon rods, 12mm, 15mm, 18mm, 25mm all of length i m.5 cach, nuts, 3mm, 4mm, smm, 6mm, 8mm, 10mm, 12mm,100 cach, bolts, dia (3mm, 4mm. smm, 6mm, 8mm, 10mm, 12mm) length (1", 1.5", 2" 2.5"),100, cach, screws.3mm, 4mm, 5mm,100 cach, washers, 3mm, 4mm, smm, 6mm, 8mm, mm, 12mm, 100 cach, studs,6mm, 8mm, length 1m5 each, nails, 1", 2", 3", 100 each, adhesives, m-seal. feviquich, fevi bond, 10 cach, 2way tapes 20 rolls,, pvc pipes, 75°. 1". 1.5", 2.5" 3" length 10ft,1 each, aluminum channels, l, c, box, strip length 12ft.2 each, pcb drill bits,0.5mm, 0.8mm, 1mmm,20 cach, drill bits, jmn, 4mm, smm, 6mm,,20 each, drill bits, 8mm, 10mm, 12mun,5 each, carpentry boring bits, entire kit, 1 kit, electronic active and passive components, resist ors, capacitors, diodes and transistors, 10 each, usb cables for connecting arduino and other development boards.10, radium cutter knives 10, glue sticks.,50, hack saw blades,6" and, 9v battery snaps 20, lan cables, for connecting raspberry pi,5, 9v batteries, 20, hacksaw (5 nos.), micro chisel set (3 nos.), , pliers (3 sets), 3, manual pcb drilling machine (3 nos.), pcb power drilling machine (3 nos.), 3, 3, cordless drilling machines (2 nos.), 2, jigsaw machines (2 nos.), power circular saw (2 nos.), files set (2 sets), 2, file handles (1 set), 1, needle files (2 sets), standard workshop tool, pipe vice (2 pcs.) 2, mini hacksaw (5 nos.), , ball peen hammer (5 nos.), steel shafi claw hammer (5 nos.), nylon mallet (5 pes.), rubber mallet (5 pcs.), allen key set (3 sets), dremel malti tool kit (2 nos.), double ended spanner sets (2) sets), 12 piece open ended spanner set (2 sets), belt and disc sanding machine (1 nos.), scroll saw machine (1 no.), tool wall covering perforator (3 pes), dremel moto saw, bench grinding machine, power return measuring tape (5 nos.), tri square 8" (5 nos.), stamless steel rule (5 nos.), digital vernier caliper (5 nos.), spirit level (5 nos.), dremel cordless rotary tool, gpio power router, sewing machine, impact drill (3 units), ratchet set (2 units), router bit starter kit, scroll saw, hot air blower with soldering iron (5 nos.), tin cutter with spring (10 units), centrifugal blower, screwdriver sets (2 sets), cutting mats (5 nos.), vacuum cleaner (2 nos., hot air gun-5 nos., micrometer-5 nos., glue gun-5 nos., air compressor, allen set wrench (5 set), tongue and groove pliers (5 pcs.), non-contact voltage tester (5) pes.), wire stripper (5 p

Central Government And Public Sector

CTN :41236795

13 Aug, 2025 NA

Bangalore - Karnataka

Tender For supply, installation, integration, and functional testing of a complete probing solution compat ible with the existing cnc machine setup. the scope includes: 1. probe kit (including probe, transmitter wit h batteries). 2. receiver unit. 3. connecting cables and essential accessories. 4. all required probing softwa re/programming cycles. 5. modifications to existing nc/plc programs to accommodate the probing system i f required. 6. functional testing and training. technical specifications:- 1. transmission technology = 2.4 g hz wireless with interference-resistant spread spectrum technology (fhss or dsss). 2. communication ran ge (probe to receiver) = minimum 15 meters. 3. applications supported = part detection (including axle le ngth), tool detection, centering and alignment detection. 4. input signal range = 13.5v to 30v dc. 5. outp ut signal specification = 4v to 30v dc, 40 ma. 6. repeatability = not more than 1.0 micro meters (2s); bet ter repeatability preferred. 7. trigger/measurement force (xy plane) = not more than 0.75 n. 8. minimum distance between units = minimum 0.5 meter between adjacent transmitters/receivers. 9. stylus overtrav el limits xy plane: minimum + or - 12 degree ; z-axis: minimum 6 mm. 10. activation method = m-code con trolled and programmable by other standard methods. 11. environmental protection (ip rating) = minimum ip68 for both probe and receiver. 12. software interface / configuration = integrated software cycles or digi tal receiver setup with display and remote controller. 13. status indications = visual or digital display of: er ror signals, probe pulse, battery status, signal strength etc. general requirements:- 1. the system should b e compatible with major cnc controllers and open for integration. 2. setup, calibration, and testing must be done at the site by the supplier. 3. all associated documentation (user manuals, circuit diagrams, paramete r lists) must be provided. 4. training to the cnc operators and maintenance personnel is to be included. [ warranty period: 12 months after the date of delivery ]

Safety Tools Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government And Public Sector