Latest safety valve Tenders | Government safety valve Tenders

State Government

CTN :45316015

01 Jun, 2026 NA

Dumka - Jharkhand

Tender For quotation for rate of materials - stone boulder of size 150 mm and below at quarry , supply of quarried stone 150-200 mm size for hand , broken at quarry , boulder with minimum size of 300 mm for pitching at quarry , gravel/quarry spall at quarry , gelatin 80% , jute netting, open weave, 2.5 cm square opening for seeding and mulching , random rubble stone , sand bags (cost of sand and empty cement bag) , square rubble coursed stone , stone bricks of size , (i) 250mm * 125mm * 100mcs , (ii) 250mm * 125mm * 125mm , (1) g.i. wire (8 to 10 swg) , (ii) black annealed (8 to 10 swg) , binding wire , (i) annealled wire (20 to 25 gauge) , (ii) black annealed (20 to 25 gauge) , expanded metal (18 gauge) 40mm * 25mm * 75 mm wid , bituminastic board (for use as per expansion joint 1.8.183 1938 filter) , (1) 25 mm thick , 150mm dia r.c.c.np2 perforated pipe , pressure release valve , (i) safety valve , (ii) pocket valve , cost of burnt clay pipe of internal dia 31.70 mm ( 11 /4^ prime prime ) external dia 38 mm ( 11 /2^ prime prime ) , (1)100 mm long , (ii)225 mm long , fuse coil , bolts 20 mm dia 25 cm long , coal tar , nuts and bolts 16 mm dia375 mm long with washer etc , palm leaves , check valve 38 mm dia. , 38 mm dia. water hose 30m long , nx core bit 48 cts(imp) , nx core bit 38 cts(imp) , nx tc bit , bx tc bit , nx st reamer cell 6.5 cts(imp) , bx st reamer cell 6.5 cts(imp) , good quality wooden core box 3 metre long x 0.85 metre wide x0.15 metre deep with longitudinal compartment to accommodate 5 rows of 3 metre long cores i.e. total 15 metre

corporations/Associations/Others

CTN :45345524

15 Jun, 2026 10.97 Lacs

Sonbhadra - Uttar Pradesh

Tender For supply of oh of main steam line valve v2 6 , oh of steam by pass valve v2 27,15, and v2 7 , oh of es 3,4,5,6 and 7 , oh of v2 -82-84 and v2-81-a to 81c , oh of hd-21, hd-29, hd-30 and hd-31 , oh of nrv of h.p. heater and feed pump , oh of group protection valve of hph , oh of dw-4, 37,38,39,40,41 and ca 5 , oh of cst makeup valve v6 60 , oh of as-48 valve , oh of nrv of extraction line es-8 , oh of suction valve of bfp , oh condensate wtr throw off valve to condenser , oh throw off valve to cond and steam isolating of lph2 , oh of steam isolating valve of lph 3, 4 , oh of safety valve of aux prds or deaerator , oh of safety valve of h.p. heater , oh of safety valve of l.p. heater. , oh of safety valve of cbd tank. , oh of safety valve of flange or stud heatng , oh of safety valve of warm up line. , overhauling of actutator of as 48 valve , oh of actr feed line valvev2 81 or v2 82 or v2 83 or v2 84 , oh of actr of v2 7 or v2 15 or v2 27 , oh of actr drip line valve and ext line valve , oh of actr valve connected to condenser , oh of actr cst make valve , oh of actr of msv l and r , oh of actr of steam isolating valve to lph2 to 4 , oh of actr steam throw off valve to condenser , cut or weld or repl of hp valve 15 to 50mm , cut or weld or repl of hp valve 51 to 100mm , cut or weld or repl of h p valve 101 to 150mm , oh of butterfly valve of condenser , oh of dea and fst with internal painting , repair or replacement of broken hanger , tightening of loose hangers , cut or weld or repl of l.p. valve 15 to 50mm , cut or weld or repl of l.p. valve 51 to 100mm , cut or weld or joint of h.p. pipe 15 to 50mm , cut or weld or joint of h.p. pipe 51 to 100mm , cut or weld or joint of h.p. pipe 101 to 150mm , cut or weld or joint of h.p. pipe 151 to 300mm , lift or straight aprds hdr by cutting weldding , o h of lph 1a , 1b , o h of lph 2 3 and 4 , oh and attend flange leakage of gc i or ii , clean of turbine oil or h2 gas cooler str , repl of damaged sp. valve v2 38 , repl of damaged special valve v2 27 , oh of turbine oil coolers , oh of main ejectors of turbine , oh of h.p. heater , oh of lcv 3to15pcv-5, 14,16,17,tcv 8 , repl bend of lp drip connected to drip pump or condenser , cut damaged bend of hph drip cont to dea , cut weld or repl of h.p. valve 151 to 300mm , blank of crh line for ht and normalizing , oh of h.p. valve nrv in h.p. line , oh of l.p. valve nrv , oh of energy absorber of bfp , oh of dss of aux. prds.

corporations/Associations/Others

CTN :45345600

17 Jun, 2026 14.56 Lacs

Sonbhadra - Uttar Pradesh

Tender For supply of oh of main steam line valve v2 6 , oh of steam by pass valve v2 27,15, and v2 7 , oh of es 3,4,5,6 and 7 , oh of v2 -82-84 and v2-81-a to 81c , oh of hd-21, hd-29, hd-30 and hd-31 , oh of nrv of h.p. heater and feed pump , oh of group protection valve of hph , oh of dw-4, 37,38,39,40,41 and ca 5 , oh of cst makeup valve v6 60 , oh of as-48 valve , oh of nrv of extraction line es-8 , oh of suction valve of bfp , oh condensate wtr throw off valve to condenser , oh throw off valve to cond and steam isolating of lph2 , oh of steam isolating valve of lph 3, 4 , oh of safety valve of aux prds or deaerator , oh of safety valve of h.p. heater , oh of safety valve of l.p. heater. , oh of safety valve of cbd tank. , oh of safety valve of flange or stud heatng , oh of safety valve of warm up line. , overhauling of actutator of as 48 valve , oh of actr feed line valvev2 81 or v2 82 or v2 83 or v2 84 , oh of actr of v2 7 or v2 15 or v2 27 , oh of actr drip line valve and ext line valve , oh of actr valve connected to condenser , oh of actr cst make valve , oh of actr of msv l and r , oh of actr of steam isolating valve to lph2 to 4 , oh of actr steam throw off valve to condenser , cut or weld or repl of hp valve 15 to 50mm , cut or weld or repl of hp valve 51 to 100mm , cut or weld or repl of h p valve 101 to 150mm , oh of butterfly valve of condenser , oh of dea and fst with internal painting , repair or replacement of broken hanger , tightening of loose hangers , cut or weld or repl of l.p. valve 15 to 50mm , cut or weld or repl of l.p. valve 51 to 100mm , cut or weld or joint of h.p. pipe 15 to 50mm , cut or weld or joint of h.p. pipe 51 to 100mm , cut or weld or joint of h.p. pipe 101 to 150mm , cut or weld or joint of h.p. pipe 151 to 300mm , lift or straight aprds hdr by cutting weldding , o h of lph 1a , 1b , o h of lph 2 3 and 4 , oh and attend flange leakage of gc i or ii , clean of turbine oil or h2 gas cooler str , repl of damaged sp. valve v2 38 , repl of damaged special valve v2 27 , oh of turbine oil coolers , oh of main ejectors of turbine , oh of h.p. heater , oh of lcv 3to15pcv-5, 14,16,17,tcv 8 , repl bend of lp drip connected to drip pump or condenser , cut damaged bend of hph drip cont to dea , cut weld or repl of h.p. valve 151 to 300mm , blank of crh line for ht and normalizing , oh of h.p. valve nrv in h.p. line , oh of l.p. valve nrv , oh of energy absorber of bfp , oh of dss of aux. prds. , 2coat paint bcw,clr,bfp,cep,drip pump and line , 2coat paint cst,bcw pump ,swc tank,line,valve , 2coat paint hcplg,sw,bcw,cw exc clr line , 2coat paint air washer sys,cep or phos orhyd , 2coat spray paint syn super enamel lpc , 2coat spray paint front ped,barring gear , 2coat spray paint brg and housing turbine , 2coat spray paint cntl valve casing , 2coat spray paint condenser and line , 2coat spray paint main oil tank , 2coat spray paint main ejector , 2coat spray paint centrifuging machine , 2coat spray paint lube oil cooler , letter writing 2 inch size dia

Central Government And Public Sector

CTN :45099128

03 Jun, 2026 NA

Chittorgarh - Rajasthan

Tender For corrigendum : tender for supply of silencer -silencer part no 14for ms gem make dryer of model hln0047 sl no 39651104 , valve by pass 12 part no 13 for ms gem make dryer of model hln0047 sl no 39651104 , valve exhaust part no 12 for ms gem make dryer of model hln0047 sl no 39651104 , valve check part no 10 for ms gem make dryer of model hln0047 sl no 39651104 , valve drain part no 11 for ms gem make dryer of model hln0047 sl no 39651104 , filter after cartridge part no 9 for ms gem make dryer of model hln0047 sl no 39651104 , filter pre. cartridge part no 8 for ms gem make dryer of model hln0047 sl no 39651104 , filter oil removing cartridge part no 7 for ms gem make dryer of model hln0047 sl no 39651104 , safety valve for ms gem make dryer of model hln0047 sl no 39651104 , valve main flow 12 part no 2 for ms gem make dryer of model hln0047 sl no 39651104 , tower adsorber part no 1 for ms gem make dryer of model hln0047 sl no 39651104 , check valve seal kit for ms gem make dryer of model hln0047 sl no 39651104

CTN :45330791

16 Jun, 2026 NA

Thane - Maharashtra

Tender For supply of xpressure balance part no: 1028100 for pneumatic safety valve model no: xsz 32 part no: 24931310801

CTN :45314283

29 Jun, 2026 20.00 Lacs

Morena - Madhya Pradesh

Tender For procurement of water supply materials as per demand — ulub municipal council, joda - work of for several work as per demand in ulb, ac pressure pipe 10 inch as per nit, ac pressure pipe 8 inch as per nit, ac pressure pipe 6 inch as per nit, ac pressure pipe 4 inch as per nit, ac pressure pipe 3 inch as per nit, gi pipe 4 inch as per nit, gi pipe 3 inch as per nit, gi pipe 2 inch as per nit, pvc pipe 4 inch as per nit, pvc pipe 3 inch as per nit, pvc t 2 inch as per nit, pvc t 3 inch as per nit, pvc t 4 inch as per nit, gi band 2 inch as per nit, gi band 3 inch as per nit, gi band 4 inch as per nit, gi band 6 inch as per nit, gi elvo 02 inch as per nit, gi elvo 03 inch as per nit, gi elvo 04 inch as per nit, gi socket 2 inch as per nit, gi socket 3 inch as per nit, gi socket 4 inch as per nit, gi socket 6 inch as per nit, siluce valv 2 inch as per nit, siluce valv 3 inch as per nit, siluce valv 4 inch as per nit, siluce valv 6 inch as per nit, telpice ci 3 inch as per nit, telpice ci 4 inch as per nit, telpice ci 6 inch as per nit, telpice ci 8 inch as per nit, reduicer ci 02*03 inch as per nit, reduicer ci 03*04 inch as per nit, reduicer ci 03*06 inch as per nit, reduicer ci 03*08 inch as per nit, reduicer ci 08*04 inch as per nit, e-band ci 3 inch as per nit, e-band ci 4 inch as per nit, e-band ci 6 inch as per nit, e-band ci 8 inch as per nit, nut bolt 1.5 inch as per nit, nut bolt 4 inch as per nit, nut bolt 6 inch as per nit, nut bolt 8 inch as per nit, nut bolt 10 inch as per nit, starter bentax 15 hp as per nit, starter bentax 20 hp as per nit, panel borad complete as per nit, starter oil per liter as per nit, main switch 63 amp with cut out as per nit, claimb all size as per nit, cable 04 mm copper as per nit, cable 06 mm copper as per nit, summbersible motor pump 7.5 hp as per nit, summbersible motor pump 10 hp as per nit, d joint with rubber ring complete 3 inch as per nit, d joint with rubber ring complete 4 inch as per nit, d joint with rubber ring complete 6 inch as per nit, d joint with rubber ring complete 8 inch as per nit, d joint with rubber ring complete 10 inch as per nit, autocut, non reutrn valve 3 inch as per nit, non reutrn valve 4 inch as per nit, flench ci 3*4 inch as per nit, flench ci 4*4 inch as per nit, flench cut wali 03*04 inch as per nit, flench cut wali 04*04 inch as per nit, rubber flench 3 inch as per nit, rubber flench 4 inch as per nit, rubber flench 5 inch as per nit, dent ci all type 3 inch as per nit, dent ci all type 4 inch as per nit, dent ci all type 6 inch as per nit, union shocket 2 inch as per nit, nipple 03*24 inch as per nit, valve iron 2 inch as per nit, valve pital 2 inch as per nit, flench gi 2 inch as per nit, t ci 3 inch as per nit, t ci 8 inch as per nit, gate valce 2 inch as per nit, galen 3 inch as per nit, galen 4 inch as per nit, sada water toti plastic as per nit, pvc water tank 500 liter as per nit, pvc water tank 1000 liter as per nit, single phase motor 1 hp as per nit, single phase motor 1.5 hp as per nit, ringga 1 inch as per nit, motor tuchan as per nit, pannel board 50 number as per nit, pannel board 60 number as per nit, ringga nojal 1 inch as per nit, ringga nojal 1.25 inch as per nit, pvc pipe 8t half inch as per nit, pvc elvo half inch as per nit, pvc socket half inch as per nit, brass elvo half inch as per nit, brass socket half inch as per nit, tape nipple half inch as per nit, t half inch as per nit, brass t half inch as per nit, pvc pipe 8t 1 inch as per nit, pvc elvo 1 inch as per nit, pvc socket 1 nch as per nit, brass elvo 1 inch as per nit, brass socket 1 inch as per nit, tape nipple 1 inch as per nit, t 1 inch as per nit, brass t 1 inch as per nit, pvc pipe 8t 0.75 inch as per nit, pvc elvo 0.75 inch as per nit, pvc socket 0.75 nch as per nit, brass elvo 0.75 inch as per nit, brass socket 0.75 inch as per nit, tape nipple 0.75 inch as per nit, t 0.75 inch as per nit, brass t 0.75 inch as per nit, pvc pipe 1.25 inch as pernit, steel toty as per nit,

CTN :45312237

09 Jun, 2026 10.00 Lacs

Satna - Madhya Pradesh

Tender For supply of jalpraday marammat samagri for f.y. 2026-27 - g.i. reducer – jindal isi (2" x 1/2") , g.i. reducer – jindal isi (1" x 1/2") , g.i. reducer jindal isi 4x2 1/2" , gi reducer (jindal isi) 3x2" , gi reducer (jindal isi) 4x3" , d-joint complete set (incl. rubber ring, nuts & bolts) 2" , d-joint complete set (incl. rubber ring, nuts & bolts) 2x 1/2" , d-joint complete set (incl. rubber ring, nuts & bolts) 3" , rubber ring 2" , rubber ring 2x 1/2" , rubber ring 3" , hdpe ci d-joint 2" , hdpe ci d-joint 2x 1/2" , hdpe ci d-joint 3" , nuts & bolts , gland packing cord 4 , m-seal , rubber gasket/packing , sluice valve 2" , sluice valve 2x 1/2" , sluice valve 3" , check valve 2" , check valve 2x 1/2" , check valve 3" , check valve 4" , check valve 6" , flange 2" , flange 2x 1/2" , flange 3" , tee (jindal isi) 2" , tee (jindal isi) 2x 1/2" , tee (jindal isi) 3" , iron tap 1/2" , iron tap 1" , plastic tap 1/2" , plastic tap 1" , brass tap 1/2" , brass tap 1" , brass gate valve (standard) 2" , brass gate valve (standard) 2x 1/2" , gate valve brass stand 3" , plastic pipe 1/2" , plastic pipe 1" , nipple 1/2" , nipple 3/4" , nipple 1" , nipple 1 1/2" , nipple 2" , nipple 2 1/2" , nipple 3" , nipple 4" , nipple 5" , nipple 6" , connection clamp 1" , connection clamp 1 1/2" , connection clamp 2" , connection clamp 2 1/2" , connection clamp 3" , connection clamp 4" , connection clamp 6" , connection clamp 8" , connection clamp 10"

CTN :45331489

16 Jun, 2026 NA

Sagar - Madhya Pradesh

Tender For supply of pressure safety valve security tag (wire seal)

CTN :45329993

09 Jun, 2026 373

Mandya - Karnataka

Tender For procurement of water suply items for the year of 2026-27 kothathi - pvc fiber 1.1/2pipe 10feet hand borewell, copper wire 2.5mm 90mtr, copper wire 1.5mm 90mtr, cable clamp, motor pump 6hp x 8 stg, winding wire 1.3 mm copper, winding wire 1.1 mm copper, winding wire 1 mm copper, pump 12stg, pump 8stg, motor repair charges 6 hp, motor repair charges 7.5hp, cable 3core 4 sq mm, cable 3core 2.5 sq mm, mn2 realy(14-23), auto.switch, preventer 7.5hp to 15hp, preventer upto 7.5hp, no push button, terminal block, r,y,b indicater lamp, volts.meter, amps.meter, start no push button, stop nc push button, overload realay, wiring.charges, motor repair.charges, start repair charges, lathe work fitting.charges, pump repair charges, motor lifting and eraction.charges, suction case set nbr, non slam check valve, pump shaft, teflon plate, couple, suction plate, bush(rubber+ stainlesss steel), suction, ss counter, setting sleeve, middle, bush seal, bush seal cover, impeller, diffuser, bowl, bowl bush, key, step sleeve, washer., hexbolt, square nut, patti (motor&pump), adaptor (motor&pump), pump nrv, stud, nut, safety valve, brackets, motor pipe, lamination, stator stack, body sleeve, motor shaft, rotor stack, copper lamination, pressure ring, balance ring, rotor assembly, upper.housing, grommet, connection piece, oil seal cover, oil seal rubbar, water bolt, sand guard, v-notch rubber, couple key, couple sleeve, stud ring, lock ring, bush, carbon bush, lower.housing, allen bolt, thrust bearing.plate, circlip lock, base, rocker support, rocker support nut, thrust bearing, thrust bearing segment, til-ting pad(trust pad), pcd cup, pcd plate, drain plug, stainer, cable.guard, winding wire 1.2 mm copper, boltnut 3/8, boltnut 5/8, insulation.tape, rewireable fuse 250 amps 415v, rewireable fuse 100 amps 415v, rewireable fuse 63 amps 415v, sada pannel board7.5hp to 15hp, d.o.l pannel board- 7.5hp to 15hp, sada pannel board 7.5 hp, d.o.l pannel board- 7.5 hp, hp7.5 x 12 stg pump, hp6 x 12 stg pump, hp10 x 12 stg pump, hp10 x 12 stg motor pump, hp7.5 x 12 stg motor pump, hp6 x 12 stg motor pump, plunger rod for hand pump borewell, bore hole casing for hand pump borewell, compression cone for hand pump borewell, riser pipe, bore well handle, cylinder for hand pump borewell, axcel for hand pump borewell, bearing for hand pump borewell, water tank for hand pump borewell, pedstail stand for hand pump borewell, nut & bolt for hand pump borewell, head for hand pump borewell, chain nut & bolt for hand pump borewell, baket washer for hand pump borewell, gi 1.25 inch copler/coller 32mm for hand pump borewell, connecting rod for hand pump borewell, gi 1.25 inch pipe for hand pump borewell, pvc tape roll, mrf tape, shalk threas, pvc 6inch cassing pipe, pvc 4.5inch cassing pipe, pvc 7inch cassing pipe, gi 6inch cassing pipe, gi 7inch cassing pipe, hacksaw blades 12x1/2x24t, garden pipe 1inch, garden pipe 3/4inch, lather nrv, electrofusion welding machine ef, hdpe 1.1/2inch pipe, hdpe 1.1/4inch pipe, hdpe 110mm pipe, hdpe 90mm pipe, hdpe 75mm pipe, hdpe 63mm pipe, hdpe(electrofusin fittings) 110mm tapping tee(belt type), hdpe(electrofusin fittings)110mm tapping tee (clamp type), hdpe(electrofusin fittings) 110mm end cap, hdpe(electrofusin fittings) 110mm reducer, hdpe(electrofusin fittings) 110mm equal tee, hdpe(electrofusin fittings) 110mm elbow 45, hdpe(electrofusin fittings)110mm elbow 90, hdpe(electrofusin fittings) 110mm copler/coller, hdpe(electrofusin fittings) 90mm tapping tee(belt type), hdpe(electrofusin fittings) 90mm tapping tee (clamp type), hdpe(electrofusin fittings) 90mm branch saddle(belt type), hdpe(electrofusin fittings) 90mm branch saddle(clamp type), hdpe(electrofusin fittings) 90mm end cap, hdpe(electrofusin fittings) 90mm reducer, hdpe(electrofusin fittings) 90mm equal tee, hdpe(electrofusin fittings) 90mm elbow 45, hdpe(electrofusin fittings) 90mm elbow 90, hdpe(electrofusin fittings) 90mm copler/coller, hdpe(electrofusin fitting

CTN :45333172

16 Jun, 2026 6.59 Lacs

Bardhaman - West Bengal

Tender For supply of sluice valve gate cst stl150 mm , check valve non rtrn ci 150mm , gate valve ibr , fiber guide bush , bushing gde

Safety Valve Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

corporations/Associations/Others

Central Government And Public Sector