Latest sand blasting Tenders | Government sand blasting Tenders

State Government

CTN :45542764

19 Jun, 2026 NA

Balurghat - West Bengal

Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

CTN :45448900

18 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For corrigendum : supply of washing plant pump , sand blasting machine , hand gloves , mask with cartridge , overhead protection shed for special test eqpt shock absorber for tk t 90

CTN :45511979

22 Jun, 2026 NA

Kota - Rajasthan

Tender For ms erw 250nb , ms erw 200nb , ms erw 150 nnb , ms erw 75 nb , sorf flange 100 nb 150 , sorf flange 150 nb 150 , 45 deg elbow 150 nb , 45 deg elbow 200 nb , 90 deg elbow 150 nb , 90 deg elbow 200 nb , blrf 150 nb 150 , caf gasket style 20 , 100 nb , caf gasket style 20 , 15 nb , caf gasket style 20 , 150 nb , caf gasket style 20 , 25 nb , caf gasket style 20 , 50 nb , gi pipe 15 nb , gi pipe 25 nb , gi pipe 50 nb , gi 45 deg elbow 50 nb , gi 90 deg elbow 25 nb , gi 90 deg elbow 50 nb , gi blrf flange, 150cl, 50 nb , gi swrf flange, 150cl, 25 nb , gi sorf flange, 150cl, 50 nb , gi swrf flange, 150cl, 15 nb , 15 nb half coupling , 15 nb gi tee one side threaded , 25 x 25 x 15 mm gi unequal te , 15 nb 90 deg gi socket weld , 15 mm sockolet, sch 80 , stud bolt 1 by 2inch , length 55 mm , stud bolt 1 by 2inch , length 70 mm , stud bolt 1 by 2inch , length 85 mm , stud bolt 3 by 4inch , length 100 mm , stud bolt 5 by 8inch length 90 mm , supply and installation of double hydrant , supply and installation of monitors , supply and installation of hose box , hose fire figting , supply and installation of gate valve 100 nb , ball valve 15nb 800 , supply and installation of y strainer , supply and installation of deluge valve , supply and installation of spray nozzl with coupling , supply and installation of flp pressure switch , supply and installation of quartzoid bulb , supply and installation of glycerine filled pressure gauge 0 20 kgf by cm2 , supply and installation of soleniod valve with coil , supply and wrapping of wrapping coating , fabricaiton of pipeline , laying of pipeline a by g , laying of pipeline b by g , surface preparation sand blasting , primer ms erw pipes , mio ms erw pipes , final coat ms erw pipes , etch ,ezp pri and synth enml gi , back filling , brick masonary , external plaster 30 mm , excavation , supply and laying of hume pipe 150 nb , ms inserts plate ,angle channel etc , pcc , rcc m20 grade , s,f,e and w of structural steel , gi honey comb gratings , reinforcemnent steel , lettering upto 2 inch , erection of valves , hydrant , monitors, hose boxes , fab erect air station with ins , air filter regulators , fabrication and erection of 15 nb and 25 nb air line , s,f,e of pipe supports , s,f,e, of hand railshand rails

CTN :45517752

18 Jun, 2026 2.93 Crore

Jhansi - Uttar Pradesh

Tender For epoxy painting after sand blasting of downstream side of gates at pahadi dam in district jhansi .

CTN :45506019

20 Jun, 2026 NA

Bhuj - Gujarat

Tender For supply of existing pipeline disconnectio , disman of pcc chiseling pneumatic hammer , disman of concretercc,cuttingof reinf , exca of earthsoft rock,cutting,clearing , removal of 200 kl tank , torsteel reinforcement , supply and fabofdishend shellplate , supplyofstructuralsteel and fabric , supply and installationofnozzles , supply and installation of sump , supply and ins. oftank manholes , sand blasting of tank , painting of tank internal , painting of tank external with piping , tank hydro testing after fabrication , instln of tank underground,180kl , tankcalibration and hydrotesting , pipinginchmeter laying ss304 , welding of pipeline , removal of sand murram soil , sand filling , sply and layg of concrete pcc,ratio , sup and lay of rccmixing test , sup and lay rr masonry,subandsuper str , construction of new earth pit

State Government

CTN :45466096

15 Jun, 2026 30.00 Lacs

Siwana - Rajasthan

Tender For annual rate contract for provding new water service connection with material under division siwana - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement fo

Central Government/Public Sector

CTN :45197087

11 Jun, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : providing of handling and transport on lumpsum basis - handling & transport service, material handling in wheel assembly section of wheel shop

Central Government And Public Sector

CTN :45436010

26 Jun, 2026 NA

Bongaigaon - Assam

Tender For sand blasting of icf & demu (ioh) bogies with components at c&w workshop, n.f. railway, new bongaigaon for a period of 02(two) years.

CTN :45445766

10 Jun, 2026 2.93 Crore

Jhansi - Uttar Pradesh

Tender For epoxy painting after sand blasting of downstream side of gates at pahadi dam in district jhansi .

CTN :45424768

18 Jun, 2026 NA

Delhi - Delhi

Tender For supply of roll cart for small material handling specifications are as follows: service cart,2 shelves with locking drawer, red, service cart overall dimensions:width:30",depth:17", height:36.7/32"*high gloss powder coat paint is scratch & chemical resistant. *storage drawers for frequently used tools. *heavy duty undercarriage to help support bottom tray load. *18 gauge heavy duty steel. *4"x2" swivel casters. ]

Sand Blasting Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government And Public Sector