Latest sand cleaner Tenders | Government sand cleaner Tenders

CTN :42426261

14 Nov, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For providing of custom bid for services - repair of galley equipment - repair of 5hp motorized grinder repair of motor repair of shaft jar base repair, repair of vegetable chiller 500 itrs 02 nos repair of compressor, repair of thermostate repair of fan motor, repair of compressor of deepfreeze, repair of heavy-duty rice boiler, repair of hot plate 3 nos repair of heating elements, repair of gas burner cleaning and inlet pipe repair, repair of food warmer heating element repair regulator repair welding and degutting 02 nos, repair of otg heavy duty oven

CTN :42424894

31 Oct, 2025 41.58 Lacs

Multi City - Haryana

Tender For cleaning of drains (width more than 600mm) by manual means including deployment of minimum 20 nos labour with all required equipment like shovel, spade, rake, grape hoe etc. along with 2 tractor trolley and1 jcb for lifting and dumping of sludge as p

CTN :42360830

07 Nov, 2025 51.15 Lacs

Tehri Garhwal - Uttarakhand

Tender For annual cleaning maintenance of school buses workshop vehicles and hem equipment.

CTN :42431271

31 Oct, 2025 2.00 Lacs

Malappuram - Kerala

Tender For the selected bidder shall be responsible for the supply and delivery of cleaning, sanitation, safety equipment, uniform material, and tools as per the detailed specifications and quantities listed in the bill of quantities (boq)

CTN :42167194

27 Oct, 2025 NA

Ananthapur - Andhra Pradesh

Tender For corrigendum : providing of custom bid for services - custom bid for services - support services for new office of ntpc rel at anantapur; running of pantry of ntpc rel office at anantapur project, anantapur (a.p.). this includes supply of manpower for cooking, cleaning of utensils,housekeeping and dusting of office including cleaning of toilets, removal of cobwebs, including washing of cover/curtains etc- the selected agency will be responsible for providing the following manpower: a) housekeeping services:- i. daily cleaning tasks: i. dusting of workstations, furniture, and fixtures. ii. sweeping and mopping floors in all office areas. iii. cleaning glass surfaces and windows. iv. emptying and sanitizing waste bins. iv. cleaning and restocking restrooms (toilet paper, soap, air freshener). vi. disinfecting high-touch surfaces (door handles, switches, lift buttons). ii. periodic cleaning tasks: deep cleaning of carpets, sofas, and upholstery (weekly/monthly). polishing of furniture and wooden surfaces (monthly). cleaning of ceiling fans, lights, and air vents (bi-weekly/monthly). iii. general duties: reporting maintenance issues (e.g., broken lights, leaks). maintaining cleaning equipment and supplies. ensuring cleanliness of entrances, reception, and common areas. b) pantry services:- i. beverage preparation & serving: i. preparing and serving tea, coffee, and water to staff and guests. ii. maintaining cleanliness and hygiene of pantry and utensils. iii. refilling water dispensers and ensuring a constant water supply. ii. pantry stock maintenance: i.monitoring inventory of pantry items (tea, coffee, sugar, milk, cups, etc.). ii. requesting restocking as needed. iii. hygiene & safety: i. cleaning kitchen counters, appliances (microwave, fridge, kettle). ii.washing utensils promptly and storing them properly. iii.ensuring proper disposal of pantry waste.

State Government

CTN :42079119

08 Nov, 2025 1.40 Crore

Uttarkashi - Uttarakhand

Tender For corrigendum : procurement of mountaineering equipment and clothing - mountaineering equipment and clothing for trainees, carabiner plain (imported)material : aluminiumgate type : solid gatemajor axis strength : 28 knminor axis strength : 11 knopen gate strength : 7 kncertified by : uiaa/ce, crampons adjustable (imported)no of points : 12boot size : 34 to 44material : steel, stainless steelcertified by : uiaa/ce, camp chair indianframe material : typically steel (strong heavier) or aluminiumseat material : polyster, nyloncup holder : yesportability : yesanti sink feet : yesdurability : important for resisting wear and tear in various weather condition , figure of eight importedmaterial : aluminium alloymain dimension : 140mmminimum rope diameter : 9mmmaximum rope diameter : 12 mmcertified by : uiaa/ce, friends importedmaterial : aluminium alloy size : 12-140 mmloops : large loops for easy manipulationset of 7/10certification :ce/en/uiaa , giri giri importedmaterial : aluminum side plates, stainless steel cam and friction plate.rope compatibility: 8.5 to 12 mm single ropecertification(s) : ce en 15151-1, uiaaweight : light weight (approx 200 gm)simple to use for belaying both lead and top-rope climbers, seat harness (imported)material & strength : webbing : made from high-strength synthetic materials such as nylon or polyester.minimum strength: straps must not break under a minimum tensile load of 19.6 kn (2,000 kg).waistbelt and leg loops : should be wide, semi-rigid, and lined with breathable mesh for comfort and support, allowing for comfortable suspension.buckles: self-locking doubleback buckles allow for quick and easy, secure adjustment. certification : uiaa, carabiner screw (imported)major axis strength : 25 knminor axis strength : 8 knopen gate strength : 7 kngate opening : 22mmlocking system : screw typecertfication : uiaa/ce, helmet (imported)adjustability : strap adjustmenthead circumference : 48cm to 61cmshell material : absharness material : nylon, polysterstrap material : nylon, polyestervents : multiplecertification : uiaa, ixe axe (imported)axe/tool length : 50cm - 75 cmpick type : curvedshaft material : aluminumshaft shape : straighthead material : steel, aluminumbinding type : leashaxe/tool features : durable, ergonomic grip, lightweightcertification : uiaa, ice pitonmaterial: stainless steel or chromoly steelweight: minimum 130 gramslength: ranging from 16-21 cmdesign: light-weight, with a tubular shape for ease of placement and usecertifications: uiaa/ce, jummar ascender (imported)material : high-strength aluminum alloyrope compatibility: 8 to 13 mmhandle: ergonomic molded grip with a textured overmolding for comfort and control.cam: toothed stainless steel cam with a self-cleaning slot.certifications: ce en 567, uiaa., ladder alluminium (ghodi) indiantype of platform step ladder : step on one side and rung on the other side.extension mechanism : yesfully extended height (in feet) : 7retracted form height (in feet) : 5platform size (length x width) : 450 mm x 300 mmstep width (in inches) : 5material : aluminiumsurface finish : powder coatedmaximum load capacity (in kg.) : 160folding mechanism : yeswarranty : 01 year, head light indianmaterial : abs plastictype : ledcontinuous run time : 12 hoursfeatures : water resistencepower source : battery poweredlight direction : adjustablebattery used : aaa, pulley single (imported)material : high-strength aluminumbearings : ball bearings for reduced friction and smooth, fast rotation. pull force/static tension: can range from 4kn (400kg) for climbing pulleys to 25kn (2500kg). maximum working load: for wall/ceiling mount pulleys, this can be up to 190 kg / 420 lbs. rope compatibility : specific to the pulleys design, common ranges are 8-12mm for climbing and 3/8 inch for wire ropes/chains. static tension: 20knrolling tension: 10kncertification : uiaa/ce, rope climbing diameter : 10-12 mmcertification : uiaa and en 892 standardconstruction :typically a "kernmantle" c

CTN :42283498

27 Oct, 2025 NA

Kanchipuram - Tamil Nadu

Tender For bid to ras providing of customized amc/cmc for pre-owned products - customized amc/cmc for pre-owned products - galley equipment; various brand; comprehensive maintenance contract (cmc); 24 hour response; yes--work for contract for annual maintenance contract of galley equipment at ins pallava-1. the contractor shall carry out preventive maintenance of the following, equipment every quarter: -, 1.1. cooking & heating equipment: -, - ss bme 304 grade hot bain marie, - electric hot plate (galley & wr), - 5 burner gas range (120"30"24"), - 2 burner gas cooking range with storage platform, - semi-automatic bench type industrial oven (3 deck), - electric griller chicken, - microwave oven / lg 30 ltrs mc 808, - food storage heating element electric with 04 containers (6kg, 304, grade ss), tasks:, - cleaning of heating surfaces and trays, - inspection and calibration of thermostats (half yearly), - checking and tightening of electrical terminals, - replacement of heating coils, knobs, and switches if required, - inspection of insulation and safety cut-off systems, - cleaning of exhaust vents and heat dispersion units, page 5 of 10, 1.2. mixing & processing equipment: -, - domestic blender/dough kneader sbwg 1500 watt 40 kgs, - cast iron commercial mixer 5 ltr, - wet grinder 10 kg cap, - pulvariser machine with stand, - vegetable cutting machine (up to 200 kgs), - potato peeler automatic 1.5 kw, tasks:, - cleaning of blades, jars, and grinding surfaces, - lubrication of moving parts, - inspection of motor windings and bearings, - calibration of speed controls, - replacement of belts, couplings, and safety covers, 1.3. refrigeration & cooling equipment: -, - ss icecube machine, - microwave oven, tasks:, - cleaning of condenser coils and drip trays, - checking refrigerant levels and gas charging (if required), - calibration of thermostats (half yearly), - inspection of compressors and insulation, - replacement of filters and seals, page 6 of 10, 1.4. exhaust & ventilation systems: -, - exhaust system for gas range, - exhaust hood with filter box and accessories, - 5 hp motor blower, tasks:, - cleaning of filters and ducts, - inspection of motor and fan bearings, - tightening of electrical connections, - replacement of worn-out belts and blades, - checking airflow and suction capacity, 1.5 cleaning & hygiene equipment: -, - wet and dry duty cleaning industrial vacuum cleaner 220smvco1, - commercial dishwasher with dryer model deb424fp, tasks:, - cleaning of filters and tanks, - inspection of pump and motor assemblies, - descaling of internal components, - replacement of hoses, nozzles, and seals, - electrical safety checks, 1.6. lpg gas system, page 7 of 10, 2. defect rectification of all machines including replacement of defective parts., 2.1 all replaced parts/compounds should be branded make and should have a, guarantee of one year from the date of renewal., 2.2 the contractor is required to attend the defect within 24 hours of reporting the, defect through telephone., 2.3 spares using for maintenance of equipment should be the oem make., 2.4 repairs / replacement of any items should be carried out as per the actual site, requirement / technical necessity., 2.5 rate quoted is inclusive of all taxes, freight charges, packing charges, spares,, transportation, service charges etc., 3. comprehensive coverage includes, - free overhauling: as per unit requirement., - free spares: due to wear and tear during contract period., - free labour: for all listed equipment., - free electrical wiring: internal wiring repairs., - free fan motor repairs: including winding and bearing issues., - free chemical washing: during overhauling., - free transportation: for off-site servicing., - free compressor & gas charging: for refrigeration units.,

Central Government/Public Sector

CTN :42425544

04 Nov, 2025 2.37 Crore

Haridwar - Uttarakhand

Tender For hiring equipment/machinery for assistance in cutting and handling of scrap, cleaning of slag/ slag mix with metal and debris from sms.

Central Government And Public Sector

CTN :42270717

31 Oct, 2025 NA

Kalpakkam - Tamil Nadu

Tender For corrigendum : supply of drain or pipe cleaning equipment (q3)

Central Government/Public Sector

CTN :42234682

28 Oct, 2025 NA

Noida - Uttar Pradesh

Tender For corrigendum : erection, testing, commissioning, trial operation & handing over including handling of materials at bhel / clients stores / storage yard and transportation to site, preparation of foundation, ndt, fixing of hangers & supports, application of lining, insulation, supply & painting, stenciling & labelling of steam turbine – generator – condenser with all auxiliaries, pumps (including cw, acw, raw water, misc.), dosing systems (lp, oxygen, naoh etc.), lube oil purification system, condenser on line tube cleaning system, plate heat exchangers, tg integral piping, dg sets and misc equipment etc., including tg-eots, fire detection & protection system of associated tg oil canal piping & mot room at unit-1 of 2x800 mw ntpc lara stpp stage-ii: package-a: unit # 1 - stg & auxiliaries along with all associated equipment, all misc. pumps (incl. cw, acw, raw water), piping, tg integral piping, dg sets, tg-eot, misc. equipment and fdps of tg oil canal & mot room of 2x800 mw ntpc lara stpp stage-ii

Sand Cleaner Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector