Latest sand collar Tenders | Government sand collar Tenders

Central Government/Public Sector

CTN :45719686

13 Jul, 2026 44.90 Lacs

Cachar - Assam

Tender For repair/ maint of lt ug cables and its connected items of masimpur mil stn incl army est at khumbigram under masimpur mil stn - e & m division items, dismantling of old unserviceable/damaged acsr or aac conductors of any size , jumper from overhead line & stacking serviceable & non serviceable material separately complete all as specified and directed., dismantling of old unserviceable/damaged stay assembly embedded in concrete including demolition of pcc and removing unserviceable meterials from site of work complete all as specified and directed., dismantling of cross-arms of ms channel or angle of any sections complete all as specified and directed., dismantling of insulators of any size/type complete all as specified and directed., dismantling earth wire or copper conductor/ cradles/stay /service feeder or distribution span complete all as specified and directed, excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable/poles and getting out in soft/loose soil complete all as specified and directed., returning, filling in trenches with soil obtained from excavation including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed., removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all all as specified and as directed., supply and laying burnt bricks of sub-class b of size 230mm x 115mm x 75mm laid in trenches for cable protection complete all as specified and as directed, supply and spread dry fine sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed. note: thickness of sand cushioning after punning down will be measured and paid separately., m&l for cutting existing road / pcc drain for taking out / laying of underground cable and including necessary earth work and making good to match with the existing surface with pcc 1:3:6 type ci using 20mm graded aggregates complete all as specified, taking down or out existing cable of sizes 10 sqmm to 70 sqmm 2/3.5/4 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, taking down or out existing cable of sizes 95 sqmm to 300 sqmm 3.5 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :-(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 10 to 70 sqmm 2/3.5/4 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc complete all as directed and specified. note :- lugs and glands will be measured and paid separately., relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 95 to 300 sqmm 3.5 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc compl

CTN :45721059

01 Jul, 2026 50.00 Lacs

Bharatpur - Rajasthan

Tender For corrigendum : estimated cost of construction materials required for mgnrega and other schemes for the financial year 2026-27. - close graded gsb material as pert table\400.a, aggregates 45 mm to 2.8mm, aggregates 6 mm nominal size, stone crusher dust finer than 3mm with not more than 10% passing 0.075 sieve., cost of water, / / , - / , , , . . ., , fine , / , - /local, (fly ash), , ( , ), / (for other than road work), 40mm ( )( 1/11), 40mm ( )( 1/11), 20mm ( ), 12/10/6mm ( ), , (5 . ), 63-40 ( 1/11), 63-40 ( 1/11), 90-45 . ( 1/11), ( 1/6), ( 1/6), ( 1/6), (pi 4-6)( 1/6), (22.5 x 11 x 7.50 cm), (i st class), (ii class), / / , (rr), (cr), (15cm ), (23cm / ), / / ( 2-3, 10-12", 2.5-3.5"), (flaky material)(3-4" thick & length and width 1-2"), (dpc,sill,coping,lintel,tand,almirha etc), 25mm , 25-40mm , 40-50mm , 50-75mm , 75-100mm , 100-150mm , / , upto 35mm thick, min. 3 sqft or more area, 60-75mm , min. 3 sqft or more area, , 900 , 901 2300 , 2300 , ( ), 900 , 901 2300 , 2300 , ( 20mm ), 900 , 901 2300 , 2300 , , , ( ii quality/ 20mm ), 900 , 901 2300 , 2300 , , 100 x 75 ., 125 x 75 ., , up to 1.5 m length, minimum 40mm thick, 1.5 m to 2.40 m length, minimum 50mm thick, 2.4 m to 3.0 m length, minimum 65mm thick, above 3.0 m length, minimum 75mm thick, precast tiles / blocks, glazed size-30x45 cm, mosaic size-40mm thick, vitrified size-60x60 cm, interlock tiles/brick/block for road work, cement interlocking block m-30grade, 60mm thick, cement interlocking block m-30grade, 80mm thick, cement interlocking block m-30grade, 100mm thick, isi marked, 1.50 . ., 2.50 . ., 0.50 . ., 1.00 . ., 4.00 . ., 6.00 . ., ( , ), , , vu;, (30 mm , ), , ( fe 415/500 ), 18 , , / / / , (size 12 guage wire and 12 guage strad/12 guage wire and 14 guage strad/14 guage, , (24 , 14 ), 40 , , 3 . . , - , , (water bound), - ( / ), ( / ), , hsd, , (25 mm thick), ( ), . . 22 (0.80 mm), . . 24 (0.63 mm), . . 22 (0.80 mm), . . 24 (0.63 mm), , . . 1 . . , . . 22 (0.80 m.m.), 6mm(2.5/2.75x1m), , . . . 1 mm ( / ), (183x90), , . . 15 . . (b class), . . 20 . . (b class), . . 25 . . (b class), . . 75 , . . 100 , . . . 90 . . ( ), . . . 110 . . ( ), . . . 140 . . ( ), . . . 110 . .(2.5kg/sq.cm) , , indian w.c., orrisa w.c., european w.c., (foot rest), (urinal) 430*350*300mm , . . . , (wash-basin )450*300mm , . . . , (s.w.) 100 m.m. , 0.6 . , . . (dia 15 mm) (is mark), . . (dia 15 mm)(is mark), 125 . . . . (grating), . . . np3 , 1200mm , 1000mm , 750mm , 600mm , 450mm , 300mm , isi marked, 20 . . , 25 . . , , . . . ( (is:12701-1989 ), 13/0.20 . . , , 6 x 75 , isi marked, 25 . . , 20 . . , , 20 . . , 20 . ., , 25 . . , 20 . . ( ), , 3 , 2 , , 2 , 3 , , isi marked, 15/16 , 5/6 , , isi marked, 3 5/6 , 6 15/16 , , 2+2 , , , 2+4 , , , 2+6 , , , ( ), 15.00 . . , 40.00 . . , 8 swg (4.00 . . ) (0.117 / .), / , , 8 10 , , 9 , (25-40 hp), , 4000 , 5-7 , 15 . ., niddle/plate , / , ( , ), compressor, hydrolic excavater/jcb (bucket capacity 0.4cum), , , , , , , , , , , , , , , ( ), ( , ), ( 3 , 75 ) , , , , wet mix plant @ 75 tonne capacity per hour, generator 250 kva, water tanker 6 kl capacity 5 km lead with one trip per hour, front end loader 1 cum bucket capacity, tipper 10 tonne capacity, add 10% of cost of carriage to cover cost of loading and unloading, motor grader 110 hp, vibratory roller 8-10 tonne

CTN :45721075

01 Jul, 2026 50.00 Lacs

Bharatpur - Rajasthan

Tender For corrigendum : estimated cost of construction materials required for mgnrega and other schemes for the financial year 2026-27. - close graded gsb material as pert table\400.a, aggregates 45 mm to 2.8mm, aggregates 6 mm nominal size, stone crusher dust finer than 3mm with not more than 10% passing 0.075 sieve., cost of water, / / , - / , , , . . ., , fine , / , - /local, (fly ash), , ( , ), / (for other than road work), 40mm ( )( 1/11), 40mm ( )( 1/11), 20mm ( ), 12/10/6mm ( ), , (5 . ), 63-40 ( 1/11), 63-40 ( 1/11), 90-45 . ( 1/11), ( 1/6), ( 1/6), ( 1/6), (pi 4-6)( 1/6), (22.5 x 11 x 7.50 cm), (i st class), (ii class), / / , (rr), (cr), (15cm ), (23cm / ), / / ( 2-3, 10-12", 2.5-3.5"), (flaky material)(3-4" thick & length and width 1-2"), (dpc,sill,coping,lintel,tand,almirha etc), 25mm , 25-40mm , 40-50mm , 50-75mm , 75-100mm , 100-150mm , / , upto 35mm thick, min. 3 sqft or more area, 60-75mm , min. 3 sqft or more area, , 900 , 901 2300 , 2300 , ( ), 900 , 901 2300 , 2300 , ( 20mm ), 900 , 901 2300 , 2300 , , , ( ii quality/ 20mm ), 900 , 901 2300 , 2300 , , 100 x 75 ., 125 x 75 ., , up to 1.5 m length, minimum 40mm thick, 1.5 m to 2.40 m length, minimum 50mm thick, 2.4 m to 3.0 m length, minimum 65mm thick, above 3.0 m length, minimum 75mm thick, precast tiles / blocks, glazed size-30x45 cm, mosaic size-40mm thick, vitrified size-60x60 cm, interlock tiles/brick/block for road work, cement interlocking block m-30grade, 60mm thick, cement interlocking block m-30grade, 80mm thick, cement interlocking block m-30grade, 100mm thick, isi marked, 1.50 . ., 2.50 . ., 0.50 . ., 1.00 . ., 4.00 . ., 6.00 . ., ( , ), , , vu;, (30 mm , ), , ( fe 415/500 ), 18 , , / / / , (size 12 guage wire and 12 guage strad/12 guage wire and 14 guage strad/14 guage, , (24 , 14 ), 40 , , 3 . . , - , , (water bound), - ( / ), ( / ), , hsd, , (25 mm thick), ( ), . . 22 (0.80 mm), . . 24 (0.63 mm), . . 22 (0.80 mm), . . 24 (0.63 mm), , . . 1 . . , . . 22 (0.80 m.m.), 6mm(2.5/2.75x1m), , . . . 1 mm ( / ), (183x90), , . . 15 . . (b class), . . 20 . . (b class), . . 25 . . (b class), . . 75 , . . 100 , . . . 90 . . ( ), . . . 110 . . ( ), . . . 140 . . ( ), . . . 110 . .(2.5kg/sq.cm) , , indian w.c., orrisa w.c., european w.c., (foot rest), (urinal) 430*350*300mm , . . . , (wash-basin )450*300mm , . . . , (s.w.) 100 m.m. , 0.6 . , . . (dia 15 mm) (is mark), . . (dia 15 mm)(is mark), 125 . . . . (grating), . . . np3 , 1200mm , 1000mm , 750mm , 600mm , 450mm , 300mm , isi marked, 20 . . , 25 . . , , . . . ( (is:12701-1989 ), 13/0.20 . . , , 6 x 75 , isi marked, 25 . . , 20 . . , , 20 . . , 20 . ., , 25 . . , 20 . . ( ), , 3 , 2 , , 2 , 3 , , isi marked, 15/16 , 5/6 , , isi marked, 3 5/6 , 6 15/16 , , 2+2 , , , 2+4 , , , 2+6 , , , ( ), 15.00 . . , 40.00 . . , 8 swg (4.00 . . ) (0.117 / .), / , , 8 10 , , 9 , (25-40 hp), , 4000 , 5-7 , 15 . ., niddle/plate , / , ( , ), compressor, hydrolic excavater/jcb (bucket capacity 0.4cum), , , , , , , , , , , , , , , ( ), ( , ), ( 3 , 75 ) , , , , wet mix plant @ 75 tonne capacity per hour, generator 250 kva, water tanker 6 kl capacity 5 km lead with one trip per hour, front end loader 1 cum bucket capacity, tipper 10 tonne capacity, add 10% of cost of carriage to cover cost of loading and unloading, motor grader 110 hp, vibratory roller 8-10 tonne

CTN :45704229

07 Jul, 2026 NA

Durg - Chhattisgarh

Tender For tender for supply of spares for wpil make pumps -a7tc 3 stage pump shaft , e14tc 2 stage impeller , e14tc 2 stage bowl , hm16tc suction bell , hm16tc bowl , a10tc 2 stage suction bell , a10tc 2 stage impeller , a10tc 2 stage rubber bearing , a10tc 2 stage shaft coupling , a10tc 2 stage column pipe , a10tc 2 stage head shaft , a10tc 2 stage bearing , a10tc 2 stage packing box bearing , a10tc 2 stage suction bell bearing , a10tc 2 stage discharge case bearing , a10tc 2 stage pump shaft , a10tc 2 stage flexible coupling , a10tc 2 stage lantern ring , a10tc 2 stage sand collar , a10tc 2 stage seal ring , a10tc 2 stage water deflector

State Government

CTN :45661388

10 Jul, 2026 1.00 Lacs

Morena - Madhya Pradesh

Tender For supply of medicines - medicines, medicines, medical equipments, lab materials and medical tests, plastering in c.m 1:5-12 mm thick with including cost and conveyance of all materials and in, b) ci bend 22.5 (250mm dia), construction of chamber for 100mm sluice plates, construction of chamber for 100mm sluices valve, supplying, conveying and fixing spls. including ea, supplying, conveying and fixing spls. including eart, construction of chamber for 100mm sluice plates, construction of chamber for 100mm sluices valve, laying and jointing pvc pipe. heading, plain cement concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using, brick work in c.m 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost, construction of chamber for 100mm sluices valve, the total value of schedule1, the total value of schedule4

State Government

CTN :45660452

07 Jul, 2026 NA

Bhavnagar - Gujarat

Tender For unit rate of composite items for recharge scheme for new and defunct tube wells/wells for groundwater recharge in bhavnagar dist. for the year 2026-27 - half brick masonry in common brunt clay building bricks having crushing strength not less than 35 kg/sq.cm. in cement mortar 1:4 (1- cement : 4 -coarse sand ) in foundation and plinth (b) conventional(r&b sor 2024-25 , it.code-06008a2a, p.no.70)(1 represents labour cess added), brick work using common burnt clay building bricks having crushing strength not less than 35 kg./sq.cm. in foundation and plinth in cement mortar 1:5. (1- cement : 5 -fine sand) (b) conventional(r&b sor 2024-25, it.code-06001ba, p.no.67)(1 represents labour cess added), providing, laying and jointing in true line and level 110 diametre u.p.v.c (type b) conforming to is 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to isi 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of pvc clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.(r&b sor 2024-25 it.no.23067, pg.no.164)(1 represents labour cess added), providing & fixing 200 mm dia "u" pvc casing pipe "cm" type pipe.( gwssb sor mech 2022-23 section-b, page. 21, item no. 11-b ), providing & fixing 175 mm dia "u" pvc casing pipe "cs" type pipe.( gwssb sor mech 2022-23 section-b, page. 21, item no. 11-b ), drilling of bore well by dth rig in rocky formation in all talukas of all districts of zone - iii. up to 350 mtr. for dia 200mm(gwssb 2022-23 sor, it.no.3.2, p.no.2), excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materialsand disposingofftheexcavatedstuffupto50 meter lead.(b) dense or hard soil(r&b sor 2024-25 , it.code-04b001b, p.no.47)(1 represents labour cess added), excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materialsand disposingofftheexcavatedstuffupto50 meter lead.(d) soft rock not requiring blasting(r&b sor 2024-25 , it.code-04b001d, p.no.47) (1 represents labour cess added), jungle cutting and site clearing(r&b sor 2024-25 , it.code-26117a, p.no.246) (1represents labour cess added), pebbles of size 5 to 10 millimeter (river pebbles)(gwssb mech 2022-23 sor,anne-a sr 18 ), gravel of size 2 to 5 millimeter(gwssb mech 2022-23 sor,anne-a sr 18 ), coarse sand(gwssb 2022-23 sor, section 1d it.no.5.1, p.no.61), backfilling of excavated tranch for pipeline with soil(gwssb 2022-23 sor, section 1&2b it.no.14(1), p.no.40), suppliying o graded stone aggregate of following sizes (forw.b.m. road)(2) hand broken stoneaggregate 40 mm to 63 mm size.(r&b sor 2024-25 , it.code-26011b, p.no.176), supplying of crushed stone aggregates, chippings etc.of hard stone of following nominal size free of disintegrated pieces deletarious and oraganic mater and grading asper i.r.c. code.(iv) 20mm(r&b sor 2024-25 , it.code-26012d, p.no.176) (1 represents labour cess added), supplying of crushed stone aggregates, chippings etc.of hard stone of following nominal size free of disintegrated pieces deletarious and oraganic mater and grading asper i.r.c. code.(vi) 10mm(r&b sor 2024-25 , it.code-26012f, p.no.176) (1represents labour cess added), spreading and laying stone agreegate of different size in to proper layer specified as per design and drawing inncl. hand packing etc complete with all lead and lift (as per ra), providing and fixing in position white marble plate of size 45x45x1.8 cm incl ingraving the tettera as per drawing/as direct etc complete. (irr. sor 2024-25 ch.5 it.17 pg.22)

State Government

CTN :45655842

26 Jun, 2026 NA

Barasat - West Bengal

Tender For invitation of item rate quotation for mgnrega works under north 24 parganas district for secure soft rate fixation purpose . - invitation of item rate quotation for mgnrega works under north 24 parganas district for secure soft rate fixation purpose ., first class bricks, first class picked jhama bricks, jhama bats, brick bats (1st class), river sand(local)/silver, coarse sand, medium sand, rubbish, supplying eucalyptus /jhaw bullah piles inclu. dressing & making one end pointed. 10 cm. dia ., supplying eucalyptus /jhaw bullah piles inclu. dressing & making one end pointed. 12.5 cm. dia., supplying eucalyptus /jhaw bullah piles inclu. dressing & making one end pointed. 15 cm dia., supplying eucalyptus /jhaw bullah piles inclu. dressing & making one end pointed. 17.5 cm dia., supplying, dressing and stacking at site bamboo pins above 5.00 cm dia. and up to 7.5cm dia., empty cement polythene bags in good condition, hume pipe np-2(r.c.c. spun pipe) 300 mm dia, hume pipe np-2(r.c.c. spun pipe) 450 mm dia, hume pipe np-2(r.c.c. spun pipe) 600 mm dia, hume pipe np-2(r.c.c. spun pipe) 700 mm dia, hume pipe np-2(r.c.c. spun pipe)900 mm dia, coller of pipe 300m dia, coller of pipe 450 m dia, coller of pipe 600 mm dia, coller of pipe 700 mm dia, coller of pipe 900 mm dia, hume pipe np-3 (spigot) 450 m dia, hume pipe np-3 (spigot) 600 mm dia, hume pipe np-3 (spigot) 900 mm dia, hire charges of roller, cement, tor steel rods/hysd/fe415/fe500/fe 500 d, tor steel rods/hysd/fe415/fe500/fe 500 d, fine sand, salbullah ( avg 10cm dia), sal bullah (avg 12.5cm dia), sal bullah (avg 15 cm dia), sal bullah (avg 17.5 cm dia), nail, stone screening type a (13.2 mm), stone screening type b (11.2mm), 1st class kiln burnt brick (traditional), supply of thermocol 12.5 mm thick, polythene sheet (150 gm per sqm), stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 40 mm nominal size, g i wire, hire charges of mixture machine, hire charges of vibrator (needle type 40mm), display board for community, display board for ibs, jute rope, coconut rope, poly rope, lime dust, spade/shovel, wire, mugs, buckets, 25mm to 30mm shuttering without staging in foundation, loading & unloading & stacking sand/stone aggregates (less than 40mm nominal size), loading & unloading & stacking sand/stone aggregates (above than 40mm nominal size), loading & unloading & stackinglime ,moorum,building rubish and similarmiscellaneous material

Central Government/Public Sector

CTN :45268330

24 Jun, 2026 4.65 Lacs

Warangal-T - Telangana

Tender For corrigendum : supply of cement, fine sand and stone aggregates to estate office for 12 months period whenever required throughout the period of agreement at nit warangal.

Central Government/Public Sector

CTN :45516898

02 Jul, 2026 NA

Bardhaman - West Bengal

Tender For supply of transportation laboratory consumables - 1kg high load heavy-duty bearing grease , white qualitative filter paper (ref. grade 1), 100mm dia, packaging type: 100 unit box , white qualitative filter paper (ref. grade 1), 150mm dia , white qualitative filter paper (ref. grade 1), 240 mm dia, (pack of 100) , borosilicate glass make beaker; cap: 500ml , high temperature safety gloves fire retardant heat resistant , cotton(100%cotton) waste (in kg) , cannon-manning vacuum viscosity tube no 12 (made of glass) , cannon-manning vacuum viscosity tube no 13 (made of glass) , borosilicate glass make 250 ml measuring cylinders class b, hexagonal , reagent grade (analytical reagent/ar grade) benzene 2.5 lit. , 100 mm/4 inch diameter rubber membrane (pack of 10) 300 mm length x 0.5 mm thickness. , borosilicate glass make beaker; cap: 1000 ml , 500 ml plastic wash bottle , 500 ml capacity glass made pycnometer bottle, brass conical top , borosilicate glass make 100ml specific gravity bottle. , bulk density apparatus for coarse and fine aggregates, 3, 15, 30 lit (set of 3). bulk density apparatus for coarse and fine aggregates, 3, 15, 30 lit (set of 3).

State Government

CTN :45558196

22 Jun, 2026 NA

Medininagar - Jharkhand

Tender For supply of list of approved construction materials for the preparation of schedule of rates for the year 2026, basic rates of which to be approved by the state level schedule rate committee (materials should conform to relevant b.i.s., mord and mort&h specifications). the rates will be inclusive of royalty but exclusive of all taxes, g.s.t,overhead and contractor's profit. "rates are at source"quarry/ crusher plant. - stone boulder of size 150 mm and below at source quarry, supply of quarried stone 150-200 mm size for hand broken at source quarry, boulder with minimum size of 300 mm for pitching at source quarry, coarse sand i) at source, coarse sand ii) at source , fine sand at source quarry, moorum at source quarry, gravel/quarry spall at source quarry, granular material or hard murum for gsb works at source quarry, fly ash conforming to is:3812 (part ii & i) at hmp plant/batching plant/crushing plant, filter media/filter material as per table 300-3 (mort&h specification) at crusher., close graded granular sub-base material 53 mm to 9.5 mm/4.75mm at crusher., close graded granular sub-base material 37.5 mm to 9.5 mm at crusher. , close graded granular sub-base material 26.5 mm to 9.5 mm at crusher., close graded granular sub-base material 9.5 mm to 4.75 mm at crusher., close graded granular sub-base material 9.5 mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 75 micron at crusher., close graded granular sub-base material 2.36 mm & below at crusher., stone crusher dust finer than 3 mm with not more than 10% passing 0.075 mm sieve at crusher., coarse graded granular sub-base material 2.36 mm & below at crusher., coarse graded granular sub-base material 4.75 mm to 75 micron at crusher., coarse graded granular sub-base material 4.75mm to 2.36 mm at crusher., coarse graded granular sub-base material 9.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 37.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 53 mm to 26.5 mm at crusher., aggregates below 5.6 mm at crusher., aggregates 22.4 mm to 2.36 mm at crusher., aggregates 22.4 mm to 5.6 mm at crusher., aggregates 45 mm to 2.8 mm at crusher., aggregates 45 mm to 22.4 mm at crusher., aggregates 53 mm to 2.8 mm at crusher., aggregates 53 mm to 22.4 mm(grade iii) at crusher., aggregates 63 mm to 2.8 mm at crusher., aggregates 63 mm to 45 mm (grade ii)at crusher., aggregates 90 mm to 45mm(grade i) at crusher., aggregates 10 mm to 5 mm at crusher., aggregates 11.2 mm to 0.09 mm (key aggregate type b) at crusher., aggregates 13.2 mm to 0.09 mm (key aggregate type a) at crusher., aggregates 13.2 mm to 5.6 mm at crusher., aggregates 13.2 mm to 10 mm at crusher., aggregates 20 mm to 10 mm at crusher., aggregates 25 mm to10 mm at crusher., aggregates 19 mm to 6 mm at crusher., aggregates 37.5 mm to 19 mm at crusher., aggregates 37.5 mm to 25 mm at crusher., aggregates 6 mm nominal size at crusher., aggregates 10 mm nominal size at crusher plant., aggregates 13.2/12.5 mm nominal size at crusher plant., aggregates 20 mm nominal size at crusher plant., aggregates 25 mm nominal size at crusher., aggregates 40 mm nominal size at crusher., crushing of stone aggregates (gsb crusher run), ac pipe 100 mm dia, acrylic polymer bonding coat, alluminium paint, aluminium alloy plate 2mm thick, aluminium alloy/galvanised steel , aluminium sheeting 2mm thick fixed with encapsulated lens type reflective sheeting including 2% towards lettering, cost of angle iron, cost of drilling holes, nuts, bolts etc.and signs as applicable class-b type iv, road aluminium stud with micro prismatic lens reflectors (with shank) 100 x 100 mm, barbed wire, bearing (cost of parts), bearing (cast steel rocker bearing assembly of 250 to

Sand Collar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government