Get complete information related to latest Sand Course Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Sand Course Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Sand Course Tenders.
Tender For auction sale of rolling stock - cond. icf coaches with iron, steel, wooden scrap and other non-ferrous. cr 93919 vpu 2. cr 93834 vpu 3. special repair 93832 vpu 4. cr 93915 vpu r/items: 1. wheel set with axel, axel box cover of all coaches=16 sets & complete 08 trolley with fittings. 2. dv of all coaches = 04 nos and bmbc of all coaches = 16 nos. 3. draw bar hook with screw coupling complete assembly = 08 nos. 4. buffer plunger = 16 nos, and buffer casing=16 nos of all coaches. 5. lot will be sold on number basis. remark: - 1. coaches are lying at roh sick line no.03 at cla cutting yard. 2. cutting allowed for easy loading. 3. purchasers are to see the coaches personally before bidding. no claim will be entertained after sale of lot. 4. r/items are to be handed over to sse/roh/c&w/ltt by the purchaser as per para 2.9 & 2.10 of jpo no. and letter no. m.688.s.43.c dt 18.08.2025. these shall be handed over at nominated place in roh depot. 5. railway track and premises to be cleared by the purchaser before compilation of delivery i.e. mud, muck, rexine, pvc sheet, wood, ply, plastic, foam, glass, rubber etc. 6. purchaser has to ensure the safety of railway assets, his labour and other staff at site. 7. purchaser will be fully responsible for any damage to railway property. 8. precaution should be taken while dismantling/cutting and loading of cut parts. 9. purchaser has to keep fire safety equipment/items i.e water, sand, fire extinguisher etc. at the cutting yard. location: roh sick line no.03 at cla cutting yard. stock holder:-sse/roh/c&w ltt.
Tender For auction sale of rolling stock - cond. icf coaches with iron, steel, wooden scrap and other non-ferrous. cr 041122 wgaccw 2. cr 041263 wgaccn 3. cr 041317 wgaccn r/items: 1. wheel set with axel, axel box cover of all coaches = 12sets & complete 06 trolley with fittings. 2.dv of all coaches = 03 nos and bmbc of all coaches = 12 nos. 3. draw bar hook with screw coupling complete assembly = 06 nos. 4. buffer plunger = 12 nos, and buffer casing = 12 nos of all coaches. 5. alternator = 06 nos, motor pump = 05 nos and rru=03 nos. 6. lot will be sold on number basis. remark: - 1. coaches are lying at line no. ktc 04 at cla cutting yard. 2. cutting allowed for easy loading. 3. purchasers are to see the coaches personally before bidding. no claim will be entertained after sale of lot. 4. r/items are to be handed over to sse/roh/c&w/ltt by the purchaser as per para 2.9 & 2.10 of jpo no. and letter no. m.688.s.43.c dt 18.08.2025. these shall be handed over at nominated place in roh depot. 5. railway track and premises to be cleared by the purchaser before compilation of delivery i.e. mud, muck, rexine, pvc sheet, wood, ply, plastic, foam, glass, rubber etc. 6. purchaser has to ensure the safety of railway assets, his labour and other staff at site. 7. purchaser will be fully responsible for any damage to railway property. 8. precaution should be taken while dismantling/cutting and loading of cut parts. 9. purchaser has to keep fire safety equipment/items i.e water, sand, fire extinguisher etc. at the cutting yard.. location: line no. ktc 04 at cla cutting yard. stock holder:-sse/roh/c&w ltt.
Tender For supply of f construction materials (such as grail, quarry, ravish, brick first class, stone, sand/gabri, saffron, broken, gitti, cement, lime, pattiya, winding wire, masonry scrap stone, iron doors and windows, enamel paint etc. materials, water tanker supply and cement concrete mixer, road roller, cement concrete interlocking block etc. on rent)
Tender For auction sale of rolling stock - cond. icf coaches with iron, steel, wooden scrap and other non-ferrous. 1. cr 90937 art 2. cr 011893 vph 3. special repair 016843 vph 4. cr 014035 vph 5. cr 011885 vph r/items: 1. wheel set with axel, axel box cover of all coaches=20sets& complete 10trolley with fittings. 2.dv of all coaches=05 nos and bmbc of all coaches=20 nos. 3. draw bar hook with screw coupling complete assembly=10 nos. 4. buffer plunger=20 nos, and buffer casing=20 nos of all coaches. remark: - 1. coaches are lying at kurla cutting yard line ktc-4 and ktc-6. 2. cutting allowed for easy loading. 3. purchasers are to see the coaches personally before bidding. no claim will be entertained after sale of lot. 4. r/items are to be handed over to sse/roh/c&w/ltt by the purchaser as per para 2.9 & 2.10 of jpo no. and letter no. m.688.s.43.c dt 18.08.2025. these shall be handed over at nominated place in roh depot. 5. railway track to be cleared by the purchaser before compilation of delivery i.e. mud, muck, rexine, pvc sheet, wood, ply, plastic, foam, glass, rubber etc. 6. purchaser has to ensure the safety of railway assets, his labour and other staff at site. 7. purchaser will be fully responsible for any damage to railway property. 8. precaution should be taken while dismantling/cutting and loading of cut parts. 9. purchaser has to keep fire safety equipment/items i.e water, sand, fire extinguiser etc. at the cutting yard. 10. lot will be sold on number basis. location: cla cutting yard line no ktc-4 and ktc-6. stock holder:-sse/roh/c&w ltt.
Tender For auction sale of others - scrap released industrial waste products unserviceable for railway use 1 coal /coke ashes debris steam coal and hard coke dust scrap pieces of u/s fire bricks 2 broken piece of plain and color glass mirror porcelain washbasin commode crockery item etc.3 u/s cotton rag canvas released from coaches old unusable hand gloves aprons etc 4 u/s rubber items window sealing rubber foam pieces gas rubber hose pipes shutter felts damaged & condemned rubber hose and pvc pipe pieces damaged torn vacuum hose pipes without universal couplings small broken pieces of rubber released from roof of the coaches & glass wool 5 unusable timber plywood wooden scrap pieces of compreg ply broken slates pieces of berth shutter panel etc scrap broken pieces of released packing wood timber jolly board condemned wooden seats without rexene & ferrous fittings wood shavings mixed with sand & rubbish 6 released packing material rubber fibre wooden polythene bags gunny bags card board paper puttah gatta thermocole etc. broken and u/s pieces of asbestos cement sheets released from shops 7 unserviceable old lp sheet including pop rivet seat berth number plate unuseable off cuts of new lp sheet unusable pieces of limpet /nftc sheet 8 floor sweeping consisting of sand mud mud muck scrap paper shrubs tree branches including dried grass & leaves coach-rust rusty nails screws and washers u/s aluminum rivets mixed with sweepings and ashes from burn material mud and muck includes unserviceable pieces of stones boulders broken concrete foundations and u/s pieces of other bricks oily greasy rags oily dirt and mud mixed with rubbish heaps excluding sludge oil 9 unserviceable off-cuts of fresh rexene pvc sheet coir recron foam released and unserviceable rexene pvc sheet coir recron foam 10 unserviceable frp products like window shutters louvers inlay lavatory wall protectors wash basin fish tails banjo shutter front cover or axle box mouldings 11 u/s nylon plastic bushes nylon wire rope and other nylon items broken welding hand screen helmet face shield 12 u/s bakelite bakelite box with screws broken and condermned bakelite cover of tumber switch and fuse without non-ferrous fitting mcb with embedded material except aluminum and copper, ceramic pieces plastic pvc sheet and sleeves broken pieces of electric switches battery floats flexible pipes unserviceable broken tube lights and bulbs fuse without non-ferrous fittings broken damaged pieces of insulating material 13 engineering garbage not required by iow and generated inside workshop like tree branches loose earth etc 14 following unserviceable items released from poh activities -bp and fp houses with end ferrous parts, unserviceable buffer pads and draft pads, frp main door embedded with ferrous window bars handle latch etc frp window shutters with embedded ferrous material, unserviceable lavatory door vestibule door fiied with latch/handle and ferrous mouldings etc, hdpe commode chute with ferrous bracket and supporting ring,plastic spool with end pieces of filler wire. 15 ferrous pieces mixed with rubbish weighing not more than 500gms 16 any item of industrial waste not covered above as advised in writing by the site engineer in charge. as is where is basis. loading by purchase. location of material : site c i.e. 100 kld etp plant/lower parel workshop/ maharashtra. custodian :sse/ys/pl(total approximate weight 50 mt.) note 1)the above items are expected generation of various items in the workshop. the railway does not guarantee availability of all types of industrial waste at all times in the same proportion some item may be even zero 2)the railway will not accept any claim for availability of any specific items or their quantities 3)no material other than above shall be permitted to be lifted 4)mode of delivery will be in metric tonne. no sorting & pick and choose of material will be allowed.
Tender For supply of pallets to the attached drawing number icf/j&t/misc-3088, for storage of scrap sheet off cuts. painting condition as mentioned below. (this painting condition supersedes painting condition mentioned in the drawing) pallet to be painted with a) two pack epoxy primer, b) pu primer/undercoat and c) pu enamel topcoat. before application of the primer a good surface preparation like degreasing is to becarried out by washing or wiping with suitable solvent. thoroughly sand the surface with emery paper 180, so as to remove loose rust and wipe clean. apply 2 pack epoxy primer. before applying pu primer/under coat sand the primer with emery paper no. 400. wipe clean and ensure that the surface is free of particles. apply pu primer/under coat. before applying top coat, sand the pu primer/under coat with emery paper no. 400. wipe clean and ensure that the surface is free of particles. apply pu enamel topcoat (brands : asian or berger or indigo or dulux or nerolac). colour: ral 2004 (pure orange) shade. note: topcoat to be applied only after getting confirmation of the exact colour shade of the respective brand from the consignee. allocation: p 4175 4000 5000 j 004 000 [ warranty period: 30 months after the date of delivery ]
Tender For bid to ras supply of misc em and br items - ac static watthour meters - energy meter (v2) as per is 13779 (q2) , gi elbow 15mm specs as per pdf documents , gi elbow reducer specs as per pdf documents , gi nipple 15mm specs as per pdf documents , gi nipple 15mm x 50mm isi marked , gi nipple 20mm x 100mm make isi marked , gi nipple 20mm x 50mm dia isi marked , gi nipple 20mm x 80mm dia isi marked , gi plug 20mm dead specs as per pdf documents , gi plug 15mm dia isi marked , gi socket 15mm isi marked , gi socket 20mm dia isi marked , gi tee 15mm isi marked , gi tee 20mm isi marked , gi union 15mm dia isi marked , pvc pipes 15mm dia 3m long , gi elbow 15mm bore isi marked , gi elbow 20mm isi marked , gi elbow 25mm isi marked , gi nipple 15mmx100mm make isi marked , gi nipple 15mm x 300mm as per sample , gi nipple 15 x 150mm as per sample , gi nipple 20mm x 300mm as per sample , gi nipple 25mm x 150mm , gi nipple 40mm x 150mm , gi socket 25mm , gi socket 40 mm make r brand , gi socket 50mm , ci bib tap 20mm , pre laminated gypsum specs as per pdf documents , pvc socket for 110mm bore pipe , pvc socket for 75mm bore pipe , chemical for att 20 percent ec , ci collar 150mm dia , coarse aggregate 12 point 5mm graded , flush strip make specs as per pdf documents , g i wire mesh having specs as per pdf documents , s stainless steel specs as per pdf documents , sandcourse , sand fine , white cement based specs as per pdf documents , mannual changespecs as per pdf documents , mannual change over specs as per pdf documents , ht copper fuse 10 amps , ht copper fuse 20 amps , ht copper fuse 30 amps , ht copper fuse 40 amps , ht copper fuse 50 amps , ht copper fuse 60 amps , high tension tar tape 11000 volts , low tension tape 30 mtr , pg clamp aluminium specs as per pdf documents , high tension hard specs as per pdf documents , low tension hand gloves 1100 volts , bambrro ladder 22 foot , bambrro ladder 18 foot , bambrro ladder 15 foot , pvc float valve 20 mm specs as per pdf documents , pvc connection specs as per pdf documents , pvc bib cock 15 mm prima , cp bib cock long body 15 mm , pvc connection specs as per pdf documents , cp waste coupling 32mm for wash basin , pvc sheet cover for ewc , pvc urinal waste pipe 50 x 800mm , pvc waste pipe 40 x 1150mm , gi tee equal 15mm , gi union socket 15mm , gi socket 15mm , butt hinges steel 75mm , pvc kit for low specs as per pdf documents , helical door spring 150mm , gi elbow 15mm , gi pipe 20mm , m-seal 100g pack , gi union socket 20mm , gi nipple 15mm x 100mm , oil putty , pvc stop cock 15mm , cp waste coupling, 125mm for kitchen sink , face half turn for cp bib cock 15mm , gi nipple 15mm x 50mm , gi pipe 15mm , pvc lid for water specs as per pdf documents , figured glass of size 4feet x 4feet x 3mm , gi nipple 20mm x 150mm , looking mirror size specs as per pdf documents , gi nipple 15mm x 150mm , gi nipple 15mm x 75mm , plain sheet glass 3mm specs as per pdf documents , cp shower rose specs as per pdf documents , wooden screw 25mm pkt of 100 nos , jumper or washer 15mm , alumn floor door stoper double type , door seal 4feet long , gi plug 15mm , nut bolt and washers 3inch , half round bedding , aluminium door specs as per pdf documents , gi nipple 15mm x 100mm make isi marked , gi nipple 20mm x 150 mm , gi nipple 25 x 50 mm , gi nipple15mm x 75mm , gi plug 20mm specs as per pdf documents , gi union socket 15mm make r brand , gi union socket 20 mm make r brand , gi union socket 25 mm make r brand , plastic laminated sheet specs as per pdf documents , jumper or washer 20mmac static watthour meters - energy meter (v2) as per is 13779 (q2) , gi elbow 15mm specs as per pdf documents , gi elbow reducer specs as per pdf documents , gi nipple 15mm specs as per pdf documents , gi nipple 15mm x 50mm isi marked , gi nipple 20mm x 100mm make isi marked , gi nipple 20mm x 50mm dia isi marked , gi nipple 20mm x 80mm dia isi marked , gi plug 20mm dead specs as per pdf documents , gi plug 15mm dia isi marked
Tender For auction sale of depot ferrous scrap - elec. loco scrap : actual lot no. 03122605 0719. pl no.98050047 (15) (hsn code 72044900-gst18% on fcm basis) ms loco scrap of cond. & unserviceable diesel/elec loco scrap of dampers slacks speri blocks cotter pins roller pins side tm end shields, gear wheels qty.(approx 4.995mt) saddles, liners, cbc handles, dampers sperry blocks (with rubber attachments) stoppers fulk arms brake hangers brn wagon twisted locks twi u clamps j brackets msu racers pe enclosures end covers panto base panto servomotors and covers, gear wheels camshafts inner and centre bearing shells cab fan covers liners stay plates tfp bend pipes side stoppers split pins brake shoes hitachi tm end covers rgr fixing plates cht cable base plates tmds end covers sl brackets smgr crank shaft end shields, impellers axel box covers, cp beds, pe&ce encloses, cotter pins, roller pins, housing for traction bar, side stopper, brake hanger with shoe, rsi covers seat fixing base centre pivot side barer bottom plates net for air inlets, terminal cover, deflectors, cht turrets, panto springs, servo motors, relay panels crank shafts ,guiding rods, das pot covers, brake cylinder loose parts, ,foot steps, hand brake assembly, j brackets, liners, shock absorbers, sand brackets panto springs, axel box covers ,racers collars, butterfly valves cp beds, manifold, cht turrets, side stopper, bolts and nuts pipe pcs, mvmt ducts, sand nosels, tm covers hand brake assembly, sand ejectors pins and other miscellaneous mech./memo/elec. of sorts & sizes full or broken with or without attachments. this material available at lot no.514a,0119,411b location: road no.3&4 cross road. and 1to4 cross and 2&3cross and road1 (image attached) (note: 1. if any ss/ corten steel & non-ferrous items found during loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery
Tender For auction sale of scrap sheared body scrap(l),scrap door with bonnet, fender & boot trunk with glass and plastic,scrap glass,scrap wiring harness,scrap alloy wheel,scrap fabric,scrap mix steel with dead axle, fuel tank etc,scrap brake booster w/o cylinder,mix miscellaneous waste with sand,plastic scrap-bumper (pcb),plastic scrap-dashboard (pcb),plastic scrap- headlights tail lights (pcb),plastic scrap (pcb),scrap automotive seats,scrap compressor,scrap shocker,scrap rubber (pcb category),scrap defaced engine (4w),scrap alternator/ starter,scrap battery bulk (pcb category),scrap motor-radiator fan/blower/wiper motor (w/o),scrap e-waste with speakers (pcb category),scrap cutted seat belt,scrap tyres with and without rim (cv),scrap tyres with and without rim (4w),scrap piping,scrap chassis,scrap steering column w/o motor,scrap leaf spring,scrap wiper blade w/o motor,scrap steering rack w/o motor,scrap defaced cng/lpg cylinder,scrap radiator and condenser,scrap clutch wire,scrap aluminum piping with rubber,scrap brake booster cylinder,used mix oil and fuel,scrap catalytic converter as per list