Latest sand ejector Tenders | Government sand ejector Tenders

Central Government/Public Sector

CTN :45336229

30 Jul, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For supply of spool body with mm threads for use in sand ejectors of 3 phase wag-9/wap-7 locos as per drawing no. ngp/trs/4/25.205 alt 0. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45327429

30 May, 2026 2.98 Lacs

Jodhpur - Rajasthan

Tender For providing and fixing of various electrical accessories at district and session court metro jodhpur - sitc of ip20 smd mid power led batten type integrated light fixture made from powder coated extruded aluminium housing with in built driver , system lumen efficacy 110 lm/watt output only at cw (5700k to 6500k) , internal surge protection of 4.0 kv with short & open circuit protection ,thd 10% , p. f. 0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000 k / 4000 k / 5700 k /6000 k/6500 k (as per ansi bin) as required., 1170mm(+/-10%) led batten with min. lumen output 2200 lm, sitc of ip-20 led recessed / surface mounted, round / square backlit & smd mid power led downlight with power coated die-cast aluminum housing with uv stabilized non yellowish diffuser with bis compliance 4.0 kv surge protected isolated driver, with short & open circuit protection input 320vac-48 hr protection, input 350vac-2 hr protection), having efficiency > 85% . system lumen efficacy of 110 lm / watt,at cw (5700k to 6500k) , thd 10 % , pf. 0.95, cri >80, life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000 k / 4000 k/ 5700 k /6000 k/6500 k (as per ansi bin) as required., recessed mounting, minimum lumen output 1950 lm, sitc of ip20, 2x2 led surface/ recessed mounting backlit & smd mid power type led light fixture not less than 35 mm housing depth made from crca sheet steel housing, high purity / transmissivity uv stabilized non -yellowish diffuser for uniform light distribution. operating voltage range 140-285 v, hv cutoff - lv cutoff should be 300-100v . high efficiency with 4 kv internal surge protection bis certified isolated driver having efficiency > 85% , with short & open circuit protection ( input 320vac-48 hoursprotection,input 350vac-2 hours protection) (integral with light fixture). system lumen efficacy of 120 lm/watt ,thd 10 % , p.f. 0.95,cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000 k / 4000 k / 5700 k /6000 k/6500 k (as per ansi bin) as required., recessed mounting, minimum lumen output 4320 lm, providing & fixing of bee star rated copper wounded with class of insulation f, double ball bearing capacitor start, aluminium body & aluminium blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 with down rod up to 30 cm with secondary support safety cable ( steel rope) , cotter pin, shackle kit with 3 x 1.5 sq.mm pvc insulated flexible copper conductor and making connection testing etc. as required., 1200 mm sweep bee 1 star rated (service value >=4.0 to 4.5 ), providing & fixing of ventilating fans capacitor start, copper wounded, single phase with pvc impeller, abs body, automatic openable louver shutter in existing opening including making connection, testing etc. as required., 200 mm sweep minimum air delivery 450 cum / hour, providing & fixing of 450 mm sweep oscillating type wall mounting / pedestal type fans with three speed, on and off position, sintered iron bush oil impregnated, with metal front and back 120 or more ribs guard; three no. aluminium blades, minimum air delivery 100 cum. / minute , minimum service value 1.11 cum./min/watt, noise level should be = 75 db, power consumption = 120 watts, motor protection through thermal overload protection device, including fixing with anchor bolts, making connection testing etc. as required., wall mounting type with adjustable vertical angle, supplying and laying fr pvc insulated & unsheathed flexible copper conductor of following nominal sizes with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from copper, stranding in acc. to is:8130/iec 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation pvc type a/c/d , flame retardant as per is 10810-53, better amperage rat

Central Government/Public Sector

CTN :44601020

06 Jun, 2026 NA

Gayzing - Sikkim

Tender For corrigendum : supply of complete portable transformer oil sampling system including moisture in oil & dew point measurement

State Government

CTN :45350074

10 Jun, 2026 14.15 Lacs

East Nimar - Madhya Pradesh

Tender For procurement of spare for pulveriser lubrication oil system and bcw cooling water flow switch installed at 2x600mw, sstpp, dongalia.

Central Government/Public Sector

CTN :45329483

17 Jun, 2026 12.61 Lacs

Nagrota - Himachal Pradesh

Tender For provision of 01 x 30 kva genr with connected items as standby power requirements for sewage treatment plant under age (i) bhalra - supply, installing, commissioning and testing, water cooled, sound proof silent type, turbo charged, diesel engine driven generating set 30 kva (at 0.8 pf), 415v, 3 phase, 4 wire engine as per is: 10001/10002 and alterator as per is: 13364, complete with relay panel for automatic starting on mains failure, control panels having meters in an integral acoustic enclosure as per recommendation cpcb norms, comprising of the following:notes: quoted rates shall deemed to include the following also:-(i) supply of t and p and normal space ie., bi-hexagonal ring spanner set of 12 pieces - 01 set.(ii) fuel measuement gauge - 01 no, hand operated fuel lifting pump with steel pipe 40mm dia - 01 no, hydro meter - 01 no, set of fan belt, oil/ fuel filters initial filling of coolant (coolant-2liters).(iii) service maintenance manual along with cat part list and price list - 03 set each.(iv) make of engine and alternator will be got approved from age (i) bhalra before placing the order., (a) diesel engine. diesel engine developing suitable bhp, 1500 rpm inclusive of the following standard accessories:(i) radiator/ heat exchanger cooling system. (xiv) battery charging generator.(ii) spider coupling guard. (xv) industrial silencer.(iii) fly wheel. (xvi) lubricant oil cooler.(iv) fly wheel housing complete with starter gear ring and coupling. (xvii) flexible pipe for silencer. (v) fuel pipes. (xviii) battery volt meter.(vi) air cleaner. (xix) water temperature gauge, lub oil pressure (vii) fuel and lubricant oil filter. gauge.(viii) by pass filter. (xx) speedo meter and engine running hours meter.(ix) coolant inhibitor. (xxi) display for fault.(x) fuel pump. (xxii) turbo charger.(xi) water pump. (xii) lubricant oil pump.(xiii) self/electric starter.(b) alternator : synchronous alternator 3 phase 4 wire, 50 cycles 1500 rpm, self excited, self regulated, brushless type, 0.8 pf, 415v, ac supply, 30 kva capacity, copper wound, complete including necessary tools, mounted on strong rigid steel fabricated base frame and directly coupled through flexible coupling with diesel engine, complete all as specified and directed., (c) amf/ control panel : amf panel factory made of suitable capacity as per original equipment manufacturer make and specification or as approved by oem for dg set of capacity 30 kva of suitable size, indoor cubical type, front and back openable fabricated out of mild steel sheet 1.6mm thick grounted in floor with adequate pcc foundation and minimum consisting of following :(i) contactor of suitable size for 30 kva dg set.(ii) copper bus bar of suitable current rating and sensitivity relay set unit with auxiliary cts.(iii) electronic latch circuit with tripping indication.(iv) re-set facilities.(v) 3 phase mvr relay unit with single phase protection complete with 2 no nc auxiliary contacts.(vi) 3 phase avr relay unit complete.(vii) self sequential starting relay unit 12 volts dc complete with alarm and power contactor. (viii) electronic timer 220 volts for main contactor with 1 no nc auxiliary contactor.(ix) electronic timer 220 volts for fuel cut off operation with 1 no auxiliary contactor.(x) battery charging 2x12 volts 10 amp complete with digital voltmeter and amps meter, including trickle and boost charging, make : su-kam, amco, exide or any other make as recommended by the manufacturer.(xi) volt meter 0-500 volts panel mounting of size 96mm square with selector switch digital type.(xii) amps meter 0-100 amps with 3 nos cts, 400/5 and selector switch 96 mm square digital type.(xiii) frequency meter (45-55) hz, 415 volt, 96mm square digital type.(xiv) the amf panel should have manual by pass arrangement too in case of failure of amf panel., (d) fuel tank of capacity as per manufacturer recommendations.(e) base frame made out of suitable channel duly reinforced and provided with adequate numbers of anti

Central Government/Public Sector

CTN :45341810

06 Jun, 2026 NA

Ganganagar - Rajasthan

Tender For capital overhauling of hp, ip, lp turbine, generator, seal oil system and its auxiliaries at 660 mw unit-7, sstps, suratgarh.

Central Government/Public Sector

CTN :45341855

06 Jun, 2026 NA

Parganas - West Bengal

Tender For capital overhauling of hp, ip, lp turbine, generator, seal oil system and its auxiliaries at 660 mw unit-7, sstps, suratgarh.

Central Government/Public Sector

CTN :45332812

05 Jun, 2026 NA

Bhilai - Chhattisgarh

Tender For tender for supply of danieli make items for the major capital repair of side trimming shear line - fixed side gb , kit8.393072.a-001 , danieli , com shear mech , kit8.430695.g-001 , danieli , com sync shaft , kit8.393073.b-001 , danieli , drive unit com , kit8.475834.v-001 , danieli , hold dwn devic , kit8.430704.h-001 , danieli , knife changing , kit8.430703.q-001 , danieli , movble side gb kit8.393077.f-001 , danieli , com shear mech , kit8.430696.a-001 , danieli , com sync shaft , kit8.393078.p-001 , danieli , drive unit com , kit8.476087.v-001 , danieli , hold dwn devic , kit8.393227.a-002 , danieli , knife changing , kit8.430704.h-002 , danieli , shear shifting , kit8.430699.l-001 , danieli , entry pinchrol , kit8.430705.k-001 , danieli , en pinchrol dr , kit8.468354.t-001 , danieli , exit pinchroll , kit8.430706.l-001 , danieli , ex pinchrol dr , kit8.468355.r-001 , danieli , sup roller tab , kit8.436098.k-001 , danieli , magnet car cyl , kit8.468065.m-001 , danieli , oil lub system , kit8.468173.n-001 , danieli , lub system com , kit8.408087.g-001 , danieli , sup , f-auto sys , kit8.430695.g-002 , danieli

corporations/Associations/Others

CTN :45327896

06 Jun, 2026 1.95 Lacs

Saharanpur - Uttar Pradesh

Tender For replacing all the packing of the converter and seals of lt and ht bushing and to replenish the oil quantity of the converter and to re-install the earthing system of the converter in the area of edd deoband

corporations/Associations/Others

CTN :45344231

08 Jun, 2026 20.82 Lacs

Sirsa - Haryana

Tender For ugmentation of 400 kv sub station nuhiyawali by providing additional 100 mva, 220/132 kv t/f at 400 kv substation nuhiyawali. (balance work of radiator foundation, nifpes oil tank and pnt fire fighting system foundation, 220 kv and 132 kv sf-6 breake

Sand Ejector Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors