Latest sand mixing machine scrap Tenders | Government sand mixing machine scrap Tenders

CTN :45499744

24 Jun, 2026 27.12 Lacs

Ongole - Andhra Pradesh

Tender For providing developmental works in torragudipadu g.p of chimakurthy mandal package 5 works - scarifying existing granular surface to a depth of 50 mm and disposal of scarified material with a lift upto 3 m and leads upto 1000 m as per technical specification clause 301.4. mord , construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 m30 (grade), coarse and fine aggregates conforming to is : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501 mord , construction of sub grade with quarry waste(table 400.13) by mix in place method normal construction of granular sub base by providing quarry waste material spreading in uniform layers with motor graded on prepared surfce mixing by mix in place method with rotavator at once and compacting with vibratory roller 80-100 kn r to achive the desired density complete as per clause 401.4 as per technical specification clause 408 mord , construction of granular sub-base by providing well graded hbg material (grading iii material) (table 400.2) , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller 80-100 kn / vibratory roller to achieve the desired density, complete as per technical specification clause 402 mord including cost of all materials, labour, conveyance, hire charges of machinary, royalties, all taxes etc complete as per direction of engineer in charge.1 , including over head but excluding seignorage charges and gst desired density, complete as per technical specification clause 401 mord / morth. but excluding vat & seigniorage charges. desired density, complete as per technical specification clause 401 mord / morth. but excluding vat & seigniorage charges. , clearing juliflora (prosafis) jungle including up-rooting and removing of juliflora stumps. etc complete. ssr from road & bridge works rates of materials & work items ..112(d) of current ssr (2025-26). mat-00482

CTN :45499755

24 Jun, 2026 17.88 Lacs

Ongole - Andhra Pradesh

Tender For providing developmental works in yerragudipadu (v) & g.p chimakurthy mandal package 2 (3 works) - scarifying existing granular surface to a depth of 50 mm and disposal of scarified material with a lift upto 3 m and leads upto 1000 m as per technical specification clause 301.4. mord. , construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 m30 (grade), coarse and fine aggregates conforming to is : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501 mord , construction of sub grade with quarry waste(table 400.13) by mix in place method normal construction of granular sub base by providing quarry waste material spreading in uniform layers with motor graded on prepared surfce mixing by mix in place method with rotavator at once and compacting with vibratory roller 80-100 kn r to achive the desired density complete as per clause 401.4 as per technical specification clause 408 mord , construction of granular sub-base by providing well graded hbg material (grading iii material) (table 400.2) , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller 80-100 kn / vibratory roller to achieve the desired density, complete as per technical specification clause 402 mord including cost of all materials, labour, conveyance, hire charges of machinary, royalties, all taxes etc complete as per direction of engineer in charge.1 , including over head but excluding seignorage charges and gst desired density, complete as per technical specification clause 401 mord / morth. but excluding vat & seigniorage charges. desired density, complete as per technical specification clause 401 mord / morth. but excluding vat & seigniorage charges. , clearing juliflora (prosafis) jungle including up-rooting and removing of juliflora stumps. etc complete. ssr from road & bridge works rates of materials & work items ..112(d) of current ssr (2025-26). mat-00482

CTN :45499760

24 Jun, 2026 27.45 Lacs

Ongole - Andhra Pradesh

Tender For providing developmental works in yelurivaripalem (v) of chimkaurthy mandal package (4 works) - shoulders are filling the selected earth for levelling the site as per drawing and technical specification clause 305.3.9 mord & 304 morth but excluding gst & seigniorage charges. for shoulders. , scarifying existing granular surface to a depth of 50 mm and disposal of scarified material with a lift upto 3 m and leads upto 1000 m as per technical specification clause 301.4. mord , earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth , construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 m30 (grade), coarse and fine aggregates conforming to is : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501 mord , construction of granular sub-base by providing well graded hbg material (grading iii material) (table 400.2) , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller 80-100 kn / vibratory roller to achieve the desired density, complete as per technical specification clause 402 mord including cost of all materials, labour, conveyance, hire charges of machinary, royalties, all taxes etc complete as per direction of engineer in charge.1 , including over head but excluding seignorage charges and gst desired density, complete as per technical specification clause 401 mord / morth. but excluding vat & seigniorage charges. desired density, complete as per technical specification clause 401 mord / morth. but excluding vat & seigniorage charges.

CTN :45499768

24 Jun, 2026 17.53 Lacs

Ongole - Andhra Pradesh

Tender For providing developmental works in pulikonda (v) of chimkaurthy mandal package 1 (3 works) - scarifying existing granular surface to a depth of 50 mm and disposal of scarified material with a lift upto 3 m and leads upto 1000 m as per technical specification clause 301.4. mord , construction of granular sub-base by providing well graded hbg material (grading iii material) (table 400.2) , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller 80-100 kn / vibratory roller to achieve the desired density, complete as per technical specification clause 402 mord including cost of all materials, labour, conveyance, hire charges of machinary, royalties, all taxes etc complete as per direction of engineer in charge.1 , including over head but excluding seignorage charges and gst desired density, complete as per technical specification clause 401 mord / morth. but excluding vat & seigniorage charges. desired density, complete as per technical specification clause 401 mord / morth. but excluding vat & seigniorage charges. , construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 m30 (grade), coarse and fine aggregates conforming to is : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501 mord , shoulders are filling the selected earth for levelling the site as per drawing and technical specification clause 305.3.9 mord & 304 morth but excluding gst & seigniorage charges. for shoulders.

CTN :45499769

24 Jun, 2026 17.57 Lacs

Ongole - Andhra Pradesh

Tender For providing developmental works in pulikonda (v) of chimkaurthy mandal package 2 (3 works.) - scarifying existing granular surface to a depth of 50 mm and disposal of scarified material with a lift upto 3 m and leads upto 1000 m as per technical specification clause 301.4. mord, construction of granular sub-base by providing well graded hbg material (grading iii material) (table 400.2) , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller 80-100 kn / vibratory roller to achieve the desired density, complete as per technical specification clause 402 mord including cost of all materials, labour, conveyance, hire charges of machinary, royalties, all taxes etc complete as per direction of engineer in charge.1 , including over head but excluding seignorage charges and gst desired density, complete as per technical specification clause 401 mord / morth. but excluding vat & seigniorage charges. desired density, complete as per technical specification clause 401 mord / morth. but excluding vat & seigniorage charges., construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 m30 (grade), coarse and fine aggregates conforming to is : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501 mord, shoulders are filling the selected earth for levelling the site as per drawing and technical specification clause 305.3.9 mord & 304 morth but excluding gst & seigniorage charges. for shoulders., earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth

CTN :45499776

24 Jun, 2026 20.60 Lacs

Ongole - Andhra Pradesh

Tender For providing developmental works in rangasaipuram village gadiparthivaripalem gp of chimakurthy (m) package 1 (4 works) - construction of granular sub-base by providing well graded hbg material (grading iii material) (table 400.2) , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller 80-100 kn / vibratory roller to achieve the desired density, complete as per technical specification clause 402 mord including cost of all materials, labour, conveyance, hire charges of machinary, royalties, all taxes etc complete as per direction of engineer in charge.1 , including over head but excluding seignorage charges and gst desired density, complete as per technical specification clause 401 mord / morth. but excluding vat & seigniorage charges. desired density, complete as per technical specification clause 401 mord / morth. but excluding vat & seigniorage charges. , construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 m30 (grade), coarse and fine aggregates conforming to is : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501 mord , earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth . scarifying existing granular surface to a depth of 50 mm and disposal of scarified material with a lift upto 3 m and leads upto 1000 m as per technical specification clause 301.4. mord . shoulders are filling the selected earth for levelling the site as per drawing and technical specification clause 305.3.9 mord & 304 morth but excluding gst & seigniorage charges. for shoulders.

CTN :45499777

24 Jun, 2026 13.75 Lacs

Ongole - Andhra Pradesh

Tender For providing developmental works in rangasaipuram village gadiparthivaripalem gp of chimakurthy (m) package 2 (3 works) - shoulders are filling the selected earth for levelling the site as per drawing and technical specification clause 305.3.9 mord & 304 morth but excluding gst & seigniorage charges. for shoulders. , scarifying existing granular surface to a depth of 50 mm and disposal of scarified material with a lift upto 3 m and leads upto 1000 m as per technical specification clause 301.4. mord , earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth , construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 m30 (grade), coarse and fine aggregates conforming to is : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501 mord , construction of granular sub-base by providing well graded hbg material (grading iii material) (table 400.2) , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller 80-100 kn / vibratory roller to achieve the desired density, complete as per technical specification clause 402 mord including cost of all materials, labour, conveyance, hire charges of machinary, royalties, all taxes etc complete as per direction of engineer in charge.1 , including over head but excluding seignorage charges and gst desired density, complete as per technical specification clause 401 mord / morth. but excluding vat & seigniorage charges. desired density, complete as per technical specification clause 401 mord / morth. but excluding vat & seigniorage charges.

State Government

CTN :45478262

13 Jun, 2026 NA

Birbhum - West Bengal

Tender For fixation of local market rate(including gst and cess) for implementation of different scheme under mgnrega at khoyrasole dev. block and 10 nos of gp under khoyrasole dev. block for the year 2026-27 - mgnrega materials, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), surface vibrator, water tanker 5000 ltr. capacity, seam bolts and nuts 6 mm dia and 25 mm long, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, brick bats, portland cement, white cement, coal (steam), brass 150 mm floor door stopper (0.357 kg), chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever, glue, unslaked lime, synthetic enamel paint, having voc ( volatile organic compound content less than 150 gm/liitre, ready mixed pink or grey primer on wood work(hard and softwood) having voc content less litrethan 50 gms/litre, water thinnable cement primer for interior wall surface, having voc content less than 50 litre gms/litre, moorum, black japan, synthetic enamel paint in black or chocolate shade, superior copal varnish, green or blue medium shade pigment, rolling shutter made of 80x1.25 mm machine rolled laths, galvanised steel plain sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, stone dust, g.i limpet washer, bitumen washer, g.i. plain washer for seam bolts, wire mesh (rabbit), diesel oil, mirror of superior make glass 60x45 cm, vitreous china pedestal for wash basin, g.i. pipes 15 mm dia, g.i. pipes 20 mm dia, g.i. pipes 25 mm dia, g.i. pipes 32 mm dia, g.i. pipes 40 mm dia, g.i pipes 50 mm dia, g.i. pipes 65 mm dia, g.i. pipes 80 mm dia, r.c.c. pipes np2 class 250 mm dia, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 600 mm dia, r.c.c. pipes np2 class 900 mm dia metre, r.c.c. pipes np2 class 1000 mm dia, white plastic seat (solid) with lid c.p. brass hinges and rubber buffers, shower rose c.p brass for 15 to 20 mm intel 100 mm dia, vitreous china squatting plate urinal, h.p. or l.p. ball valve with polythene floats: 15 mm dia, h.p. or l.p. ball valve with polythene floats: 20 mm dia, h.p. or l.p. ball valve with polythene floats: 25 mm dia, brass full way valve with c.i. wheel (screwed end) 25 mm dia, vitreous china flat back wash basin 630x450 mm, vitreous china angle back wash basin 400x400 mm, vitreous china foot rests 250x125x25 mm, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 kg/ sqm), float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm), anodised aluminium hanging type door stopper, galvanised steel corrugated sheets, vitreous china flat back wash basin 550x400 mm, stainless steel bolts /square bar and plates, mild steel tubes hot finished seamless type, red oxide zinc chromate primer, vitreous china flat back wash basin 450x300 mm, hydraulic door closer tubular type aluminium section body each, oxidised m.s. casement stay (straight peg type) 300 mm not less than 0.33 kg, coloured orissa pattern w.c. pan 580x440 mm, coloured pedestal type w.c. pan 580x440 mm (european type), circular shape 450 mm dia precast r.c.c. manhole cover with frame l.d. -25, upvc pipes (working pressure 4 kg /cm2 ) single socketed pipe 75 mm dia, upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm dia, upvc single equal tee (without door) 75x75x75 mm, upvc single equal tee (without door) 110x110x110 mm, upvc single equal te

CTN :45402245

10 Jun, 2026 1.58 Lacs

Ernakulam - Kerala

Tender For ward i nedumthodu watch station by road concreting - stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), wall form panel 1250x500 mm, corner angle 45x45x5 mm 1.50 m long, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, m.s. tube 40 mm dia, quarry waste

CTN :45402246

10 Jun, 2026 1.56 Lacs

Ernakulam - Kerala

Tender For ward xiv kochukudi payyana road concreting - stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), wall form panel 1250x500 mm, corner angle 45x45x5 mm 1.50 m long, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, m.s. tube 40 mm dia

Sand Mixing Machine Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government