Latest sand rammer scrap Tenders | Government sand rammer scrap Tenders

Central Government/Public Sector

CTN :45581558

29 Jun, 2026 NA

Roorkee - Uttarakhand

Tender For design, manufacturing, supply, installation, testing, commissioning and maintenance during warranty period of heavy duty passenger escalator for vertical height of 6 meter at railway stations over nr conforming to rdso specification no.-rdso/pe/spec/tl/0095 (rev-4)-2026 dated 16.01.2026, with warranty of 2 years. note:- the standard vertical height of escalator is 6 meters. the supplier shall be given +0.6% of quoted rate with variation of vertical heights +0.15 meters i.e. if the height become 6.15 meter then the amount paid to bidder will be 1.006 times quoted rate and if height becomes 5.85 meter than amount paid will be 0.994 times of quoted rate. for a height variation on higher side of standard height, example for 6.00-6.14 m, payment will be on the basis of escalator height of lower limit of slab i.e. 6.00 m while for a height variation on lower side slab of standard height i.e. for 5.85-5.99 m, payment will be on the basis of next higher slabof escalator height i.e. 6 m. the details required as per rdso specification annexure-1 mb div. [ warranty period: 24 months after the date of delivery ] ]

State Government

CTN :45582196

09 Jul, 2026 NA

Gandhinagar - Gujarat

Tender For supply of measuring instruments for electrical testing lab gtps. - true-rms digital multimeter., analog multimeter, clamp-on leakage current tester., ac leakage current clamp meter., true-rms digital multimeter., analog multimeter, clamp-on leakage current tester., ac leakage current clamp meter., true-rms digital multimeter., analog multimeter, clamp-on leakage current tester., ac leakage current clamp meter., true-rms digital multimeter., analog multimeter, clamp-on leakage current tester., ac leakage current clamp meter., true-rms digital multimeter., analog multimeter, clamp-on leakage current tester., ac leakage current clamp meter., true-rms digital multimeter., analog multimeter, clamp-on leakage current tester., ac leakage current clamp meter., true-rms digital multimeter., analog multimeter, clamp-on leakage current tester., ac leakage current clamp meter.

State Government

CTN :45591291

02 Jul, 2026 NA

Gwalior - Madhya Pradesh

Tender For quotations for calibration of various equipments of regional meter testing laboratory-single phase meter test system/ld 13086 ,three phase refrence standard/050088433 ,multi secondary voltage transform er/025022608

Co-operative

CTN :45571694

30 Jun, 2026 NA

Mumbai - Maharashtra

Tender For inspection, testing, measurement and rectification/improvement of earthing system covering lifts, meter rooms and all society wings, including submission of technical recommendations and allied works

Central Government/Public Sector

CTN :45329483

24 Jun, 2026 12.61 Lacs

Nagrota - Himachal Pradesh

Tender For corrigendum : provision of 01 x 30 kva genr with connected items as standby power requirements for sewage treatment plant under age (i) bhalra - supply, installing, commissioning and testing, water cooled, sound proof silent type, turbo charged, diesel engine driven generating set 30 kva (at 0.8 pf), 415v, 3 phase, 4 wire engine as per is: 10001/10002 and alterator as per is: 13364, complete with relay panel for automatic starting on mains failure, control panels having meters in an integral acoustic enclosure as per recommendation cpcb norms, comprising of the following:notes: quoted rates shall deemed to include the following also:-(i) supply of t and p and normal space ie., bi-hexagonal ring spanner set of 12 pieces - 01 set.(ii) fuel measuement gauge - 01 no, hand operated fuel lifting pump with steel pipe 40mm dia - 01 no, hydro meter - 01 no, set of fan belt, oil/ fuel filters initial filling of coolant (coolant-2liters).(iii) service maintenance manual along with cat part list and price list - 03 set each.(iv) make of engine and alternator will be got approved from age (i) bhalra before placing the order., (a) diesel engine. diesel engine developing suitable bhp, 1500 rpm inclusive of the following standard accessories:(i) radiator/ heat exchanger cooling system. (xiv) battery charging generator.(ii) spider coupling guard. (xv) industrial silencer.(iii) fly wheel. (xvi) lubricant oil cooler.(iv) fly wheel housing complete with starter gear ring and coupling. (xvii) flexible pipe for silencer. (v) fuel pipes. (xviii) battery volt meter.(vi) air cleaner. (xix) water temperature gauge, lub oil pressure (vii) fuel and lubricant oil filter. gauge.(viii) by pass filter. (xx) speedo meter and engine running hours meter.(ix) coolant inhibitor. (xxi) display for fault.(x) fuel pump. (xxii) turbo charger.(xi) water pump. (xii) lubricant oil pump.(xiii) self/electric starter.(b) alternator : synchronous alternator 3 phase 4 wire, 50 cycles 1500 rpm, self excited, self regulated, brushless type, 0.8 pf, 415v, ac supply, 30 kva capacity, copper wound, complete including necessary tools, mounted on strong rigid steel fabricated base frame and directly coupled through flexible coupling with diesel engine, complete all as specified and directed., (c) amf/ control panel : amf panel factory made of suitable capacity as per original equipment manufacturer make and specification or as approved by oem for dg set of capacity 30 kva of suitable size, indoor cubical type, front and back openable fabricated out of mild steel sheet 1.6mm thick grounted in floor with adequate pcc foundation and minimum consisting of following :(i) contactor of suitable size for 30 kva dg set.(ii) copper bus bar of suitable current rating and sensitivity relay set unit with auxiliary cts.(iii) electronic latch circuit with tripping indication.(iv) re-set facilities.(v) 3 phase mvr relay unit with single phase protection complete with 2 no nc auxiliary contacts.(vi) 3 phase avr relay unit complete.(vii) self sequential starting relay unit 12 volts dc complete with alarm and power contactor. (viii) electronic timer 220 volts for main contactor with 1 no nc auxiliary contactor.(ix) electronic timer 220 volts for fuel cut off operation with 1 no auxiliary contactor.(x) battery charging 2x12 volts 10 amp complete with digital voltmeter and amps meter, including trickle and boost charging, make : su-kam, amco, exide or any other make as recommended by the manufacturer.(xi) volt meter 0-500 volts panel mounting of size 96mm square with selector switch digital type.(xii) amps meter 0-100 amps with 3 nos cts, 400/5 and selector switch 96 mm square digital type.(xiii) frequency meter (45-55) hz, 415 volt, 96mm square digital type.(xiv) the amf panel should have manual by pass arrangement too in case of failure of amf panel., (d) fuel tank of capacity as per manufacturer recommendations.(e) base frame made out of suitable channel duly reinforced and provided with adequate nu

Co-operative

CTN :45595022

25 Jun, 2026 7.50 Lacs

Bengaluru - Karnataka

Tender For supply erection, testing and commissioning of milk flow meter, software installation and other related works to nandini milk product, bengaluru.

CTN :45581741

01 Jul, 2026 3.63 Lacs

Tanuku - Andhra Pradesh

Tender For supply, delivery and installation of advanced testing mechanism, lab equipment for conducting daily quality of drinking water in tanuku municipality supply, delivery & installation of compact photometer pf-12plus make: mn, germany (or) any equivalent isi make model no: 919250 technical specifications: type: filter photometer with microprocessor control, self-test and auto-calibration light source: xenon lamp optical system: automatic filter wheel with 7 interference filters wave length: 345 nm / 436 nm / 470 nm / 540 nm / 585 nm / 620 nm / 690 nm plus 1 compartment for an additional filter, 860 nm led for ntu measurement wave length accuracy: ± 2 nm, bandwidth at half transmission: 10 nm?12 nm photometric range: ± 3 e photometric accuracy: ± 1 % long term stability: < 0.002 a/h measuring modes: more than 100 preprogrammed tests and special methods, absorbance, transmission, factor, standard, nephelometric turbidity measurement; 50 freely programmable methods pre programmed tests: nanocolor tube tests, visocolor eco tests and powder pillows turbidity measurement: nephelometric turbidity measurement at 860 nm (based on iso 7027), 1?1000 ntu cuvette slot: round tubes 16 mm od data memory: 1000 results, glp conform display : backlit graphic display, 128 x 64 pixel auto off: inactive or automatic shutdown after 5 min, 10 min, 15 min, 20 min, 60 min internal quality control: with nanocontrol nanocheck 2.0 operation: self-explanatory menu guidance, plastic foil keypad, test selection via parameter lists language: de / en / fr / es / it / nl / hu / pl / pt / cz / id / sl / tr / my operating range: 10?40 °c (50?104 °f), max. 80 % relative humidity (non-condensing) power supply: via usb power supply, standard or rechargeable batteries or accu-pack weight: 0.7 kg dimensions (l x w x h): 215 x 100 x 65 mm scope of delivery photometer, software dvd, manual, visocolor eco test instructions, 4 batteries, 4 empty test tubes, funnel, beaker, syringe, usb cable, calibration cuvette, cleaning cloth and certificate in rugged case hazardous material: no , supply, delivery & installation of mm42dp-ph,ec,tds portable multi-parameter water quality meter with ph, conductivity electrodes. includes: mm-42dp(main unit)+mm4-ph(1m) ph electrode+mm4-ec(1m) ec electrode make: dkk-toa corporation, japan. technical specifications : measuring method : ph : glass electrode method orp : platinum electrode method conductivity : ac bipolar method dissolved oxygen : optical type temperature : thermistor resistor display unit :custom lcd(with backlight) measurement items/ranges : ph : ph0.000 to ph14.000 mv (orp) : -2000 to 2000mv conductivity:0.1ms/m to 10s/m d0: 0.00-20.00mg/l or 0.0 to 200.0% electrical resistivity:0.1o.m to 10ko.m (converted from electric conductivity) salinity (nacl):conversion from electrical conductivity salinity (pss: practical salt):conversion from electrical conductivity total dissolved solids (tds):conversion from electrical conductivity temperature:0.0to100.0°c display range : ph : ph-2.000to ph16.000 mv (orp) : 0to99.99mg/l 0to999.9mg/l 0to9.999g/l 0to99.99g/l 0to999.9g/l (automatic/manual range switching) temperature :-5.0to110.0°c do:0.00-22.00mg/l or 0.0 to 220.0% display resolution : ph :0.01ph/0.001ph mv (orp) :1mv conductivity :0.05%fs electrical resistivity :0.05%fs, salt :0.01%(nacl)0.01psu(pss) total dissolved solids (tds) :0.01%fs temperature :0.1°c, repeatability (instrument body): ph :within ±0.006ph mv (orp) :±2mv, conductivity :±0.5%fs, do:when combined with 8mg/l ±0.1mg/l or 100%±1% electrical resistivity :±0.5%fs salt :±0.5%fs, total dissolved solids (tds) :±0.5%fs temperature :within ±0.2°c ph temperature compensation range: atc (automatic temperature compensation): 0 to 100.0? mtc (manual temperature compensation): 0 to 100.0? electrical conductivity temperature compensation range : atc (automatic temperature compensation): 0 to 100.0? mtc (manual temperature compensation): 0 to 100.0°c atc off (no temperature c

CTN :45588513

24 Jun, 2026 NA

Jamalpur - Bihar

Tender For supply , installation & commissioning of pillar mounted jib crane, (wire rope & drum type ) lifting capacity -01 tone, arm length- 04 meter & slewing angle- 360 degree. all technical specification is attached as annexure 'b'. note:- 1. load testing certificate of wire rope and bottom block form nabl /government approved laboratory. 2. load test certificate of hoist form nabl / government approved laboratory will be required at the time of supply of item. [ warranty period: 30 months after the date of delivery ] ]

CTN :45593148

27 Jun, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of testing of earth pit , testing of relay , thermography of equipment , preparation of earth pit layout , testing of insulation mat , load testing of battery bank , transformer oil testing , testing of transformer tan delta , testing of transformer partial discharge , routine testing of transformer , servicing and testing of vcb , wti winding temperature indicator calibration , oti oil temperature indicator calibration , buchholz relay testing , testing of third harmonic la , testing of vcb bottle , vlf testing of cable 100 percent , polarization index testing motor , insulation resistance testing , electrical safety audit , calibration of voltmeter , calibration of ammeter , cablibration of energy meter , cablibration of power factor meter , acb servicing and testing , pair of ht electrical gloves, 25 kv, is 13774 2021 , pair of lt electrical gloves, 1.1 kv, is 4770 1991 , insulation mat 2.5 mm, lt, is 15652 , insulation mat 3 mm, ht, is 15652 , oltc oil testing as per is 1866 , dga of transformer oil , transformer oil filtration , thermal omicron b2hv relay test , testing of mccb , testing of rccb , pi of power cables , current transformer testing , digital megger meter , led 300 watts for high mast tower , digital ampere meter , communication cable tester , digital clamp meter * /bid number : gem/2026/b/7664367 + /dated: 17-06-2026 ' ' / bid document 1 / 51

CTN :45578822

22 Jun, 2026 3.58 Lacs

Raipur - Chhattisgarh

Tender For construction of the laboratory building for central power research institute at naya raipur loc village-banjari, layer-2, naya raipur (c.g.) (s.h.:- construction of temperature rise test bay, impulse test bay, routine t energy meter testing & cyber security building, electric sub-station, deep tube well (2 nos.) & recharge pit 1 no. underground sump of capacity 50,000 liters with pump house, internal road with rcc drain including service and horticulture operation etc.s.h.- providing pump set.

Sand Rammer Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

Co-operative

Central Government/Public Sector

Co-operative