Latest sander Tenders | Government sander Tenders

Central Government/Public Sector

CTN :45730899

13 Jul, 2026 NA

Hubli - Karnataka

Tender For supply of spares kit for sander control valve of rotex type - 21114-10-3g consisting of 11 items. (1) m.a spring -01-no (2) pilot o ring -01 no (3) manifold o ring -03 nos. (4) m.a o ring -01- no (5) manual actuator (push button )-01- no (6) guide o ring -01 no (7) plunger assly.-01 no (8) body o ring-01 no (9) seat o ring -01-no (10) piston o ring -01 no (11) ventiifeder (valve spring)-01 no. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45730911

07 Jul, 2026 NA

Valsad - Gujarat

Tender For supply of set of sanding arrangement for wap7/wag-9 locomotives consisting of 03 items in 3 nos. i) guard assembly as per drgno ngp/trs/4/25.065 rev-1, qty-01no. ii) adapter for sanding arrangement as per drg. no. ngp/trs/4/25.064 rev-1,qty-01 nos. iii) holder for sander pipe as per drg no. ngp/trs/4/25.089 rev.-2 qty-01 nos. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ]]

Central Government/Public Sector

CTN :45737357

21 Jul, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of sander clamping bracket assembly for wap-4 loco as per drg. no. a 2/2001/cnb/1639/5019/sg. [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45728138

17 Jul, 2026 NA

Varanasi - Uttar Pradesh

Tender For corrigendum : supply of kit sander controle valve (rotex make) as per drg.no. 17660397 alt nil [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45728221

06 Jul, 2026 NA

Raipur - Chhattisgarh

Tender For supply of kit sander controle valve (rotex make) [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45628963

02 Jul, 2026 NA

Bhopal - Madhya Pradesh

Tender For corrigendum : supply of electrical angle disc sander with operational accessories (sanding disc & rubberpads). disc dia. : 180 mm. power input : 700 to 1200 watt. no load speed : 3500 to 5000rpm. body material : metalic.

Central Government/Public Sector

CTN :45725014

29 Jul, 2026 NA

Itarsi - Madhya Pradesh

Tender For supply of elbow connector for sander equipment of wag-9 locomotive specfication clw drg.no-1209-18-406-035 or latest note: latest alteration will be applicable at the time of tender opening. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

CTN :45728286

17 Jul, 2026 NA

Rourkela - Odisha

Tender For supply of sander with nozzle assembly to m/s. ftrtipl pt. no.- 031001000a or m/s. recon drg. no.-rec/st/211 (item no. 01 to 07) for 3-phase loco. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45702843

03 Jul, 2026 NA

Jabalpur - Madhya Pradesh

Tender For auction sale of depot miscellaneous scrap - scrap mixed rubber items with or without ms attachment consisting bp & fp rubber hose pipe, mr & bc rubber hose pipes, bogie sander rubber pipes, bogie to body rubber pipes, compressor mounting pad, sandwitch mountaing pad including ferrous & other rubber items released from ac locomotives. weight= 10 mts. for custodian information ss-11 no. nkj/trs/scf/26-27/8 dt. 01.06.2026. ds-8 note no. 020723 dt. 01.06.2026. mode of delivery by actual weight only. (remark- 1. sale condition "as is where is basis" & uniform sale condition for e-auction is applicable. 2. the purchaser of the awarded lot are advised not to wait for last date of fdp considering the forthcoming mansoon season. all efforts should be made to lift the lot as early as possible.)

CTN :45696125

13 Jul, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

Sander Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors