Get complete information related to latest Sanding Ejector Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Sanding Ejector Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Sanding Ejector Tenders.
Tender For auction sale of pway scrap - pl no. 98011224 lot no. ubl-kud-002-r-26-a cond & un-serviceable 52 kg cl-iii rails condemned and un-serviceable rails scrap consisting of rails 52 kg cl-iii, rails c/a [ 1 meter] rails = 66 nos, 755.45 rm, total rails: 66 nos, total rm= 755.45 rm, total qty= 39.200 mts, available at kud railway stn @ kms 714/800 to 714/900(lh side), in karnataka state. under the custody of sse/p-way/kud, [delivery of rails will be affected on sectional weighment basis without applying factor of wear and tear] [rails of length below one meter, if available in the lot are not for sale and are to be returned to custodian]. [while delivery if any fish plate, bend fish plate, bolts, nuts etc. attached to rails to be returned to railways] terms and conditions: 1] other p. way items nearby the lot are not for sale and to be returned to the custodian. 2] prospective bidders are advised to inspect the lots put up for e-auction and as mentioned in the relevant auction catalogue prior to bidding. 3] the detailed inventory, qty, road approach and location of the lot is as per the joint inspection report. 4] the purchasers should survey the material for road approach, location and qty before bidding the lot. after bidding no correspondence will be entertained. 5) the weight of rail scrap is calculated as per length multiplied by sectional weight for accounting. actual weight may be same or lesser than the mentioned in the auction due to wear and tear. it is the responsibility of the purchaser to bid accordingly. 6) after full payment the successful bidder should request for a date of delivery at least 7 days in advance from the desired date. 7) the delivery request should have 3 different dates. the earliest possible/available date will be given. note: there will be a compulsory gap of 2 days between the date of delivery fixation letter and the actual date of delivery. the purchaser shall abide by this.
Tender For auction sale of pway scrap - pl no. 98011224 lot no. ubl-kud-003-r-26-a cond & un-serviceable 52 kg cl-iii rails condemned and un-serviceable rails scrap consisting of rails 52 kg cl-iii, rails c/a [ 1 meter] rails = 100 nos, 1243.74 rm ,total rails: 100 nos, total rm= 1243.74 rm, total qty= 64.538 mts, available at kud railway stn @ kms 713/300 to 713/600(lh side), in karnataka state. under the custody of sse/p-way/kud, [delivery of rails will be affected on sectional weighment basis without applying factor of wear and tear] [rails of length below one meter, if available in the lot are not for sale and are to be returned to custodian]. [while delivery if any fish plate, bend fish plate, bolts, nuts etc. attached to rails to be returned to railways] terms and conditions: 1] other p. way items nearby the lot are not for sale and to be returned to the custodian. 2] prospective bidders are advised to inspect the lots put up for e-auction and as mentioned in the relevant auction catalogue prior to bidding. 3] the detailed inventory, qty, road approach and location of the lot is as per the joint inspection report. 4] the purchasers should survey the material for road approach, location and qty before bidding the lot. after bidding no correspondence will be entertained. 5) the weight of rail scrap is calculated as per length multiplied by sectional weight for accounting. actual weight may be same or lesser than the mentioned in the auction due to wear and tear. it is the responsibility of the purchaser to bid accordingly. 6) after full payment the successful bidder should request for a date of delivery at least 7 days in advance from the desired date. 7) the delivery request should have 3 different dates. the earliest possible/available date will be given. note: there will be a compulsory gap of 2 days between the date of delivery fixation letter and the actual date of delivery. the purchaser shall abide by this.
Tender For auction sale of pway scrap - pl no-98011285, 60 kg u/s rail below 1 mtr. (01 stack). 32.525 mt. for stock holder sse/pw/rma. ss-11 no.- udm/sse/pw/rma/rail/60kg/2025-26/08 date 21.02.2026. ds-8 no-036121 dt.21.02.2026. lot should be sold on as is where is basis. purchasers are requested to see the lot/site and approchable road before bidding. no claim will be entertained after sale of lot. the stock holder is responsible for any alteration, deletion & variation in the lot or in weighment or tempering with the lot will be solely responsibility of stock holder after joint inspection, if any found subsequently. bidders must submit the fixation of the delivery date through the ireps e-auction sale module at least 7 days prior to the delivery date. delivery will be given by actual weight on government approved dharam kanta only. material lying in rajasthan state.
Tender For auction sale of pway scrap - pl no-98011285, 60 kg u/s rail (01 stack). 105 nos, 829.250 rm, 50.037 mt. for stock holder sse/pw/rma. ss-11 no.- udm/sse/pw/rma/rail/60kg/2025-26/07 date 07.02.2026. lot should be sold on as is where is basis. purchasers are requested to see the lot/site and approchable road before bidding. no claim will be entertained after sale of lot. the stock holder is responsible for any alteration, deletion & variation in the lot or in weighment or tempering with the lot will be solely responsibility of stock holder after joint inspection, if any found subsequently. the lot is approachable by kachha road. delivery will be given in dry season only. bidders must submit the fixation of the delivery date through the ireps e-auction sale module at least 7 days prior to the delivery date. note:-cutting may be allowed for easy loading at the time of delivery. delivery will be given by rm only. material lying in rajasthan state.
Tender For manufacture and supply of improved switch expansion joint for long welded rail (with65mm max gap) for b.g 60kg on psc sleepers for curves more than 2 degree to 4 degree confirmingto rdso drg. no. t-8926 alt-1 complete with all fittings as per parts listed in the drawing but excluding grsps as per annexure-a. specification: irs specification irs: t-10-2025 and technical specification for improved sejs (rdso/t-6922 to t-6934). this is a safety item. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For supply of maint of improved design of iaios , ms mesh wire size 12.7 mm x 76.2 mm , ms mesh wire size 2600 mm x 800 mm , punched tape concertina coi , punched tape baby concertina coil , fence post type circular hollow section , truss support post with rail end cap , truss support post with rail end cap ms steel tube , straining y arm for supporting top ptcc , intermediate y arm for supporting top ptcc , razor running tape , omega clamp 89 mm dia 35 mm width 3 mm thickness , brace band 89 mm 41 mm width 4 mm thickness , mushroom head bolt with breakable head , eye bolt with loop nut , anchor rod 10mm dia 300mm long , tie wire 1.4mm dia 100mm length , flat clamps for panel connection flat , ss 304 mushroom head bolt, m8x25 , manufacturing sand , aggregate 20mm. , aggregate 40mm. , quick setting compound conforming , ms binding wire , industrial leather safety gloves , heavy duty 4 lbs sledge hamme , steel gurmala planer fabricated from ms steel , cast iron plumb bobs , shovel square , adjustable hacksaw frame , wooden gurmala , bricktrowel , double edge , non metallic fiberglass measuring tape 5 mtr , non-metallic fiberglass measuring tape 30 mtr , heavy duty pickaxes , rivet gun machine , wire cutter 150mm , collapsible y joint 12 ft long , collapsible y joint 10 ft long , heavy duty cutting pliers , ratchet spanner with deep socket 14 mm , flexible transparent pvc leveling tube 25 meters , iron cutter heavy duty , ratchet spanner single socket13mm , hog ring machine with wire , helmet
Tender For supply of living shelter ojl 2467 - supply and construction of hybrid pre-engineered ojls building offr jcos living shelter , water storage tank triple layer 1000 ltrs , fabrication from structural steel section for staging of water storage tank made of capacity 500 oblique 1000 ltrs made out of ms angle iron frame , wc european type model 2008 ewc and combi flush pvc flushing cistern of 10 ltr capacity , looking mirror of selected quality frameless of size 600x450x5mm , chromium plated toilet paper holder with flap , brass chromium plated towel rail 600 mm long 20 mm dia with cloth hooks min 04 nos , chromium plated piller cock swan neck with aerator and butter fly handle weight not less then 450 gm , stop cock angular type chromium plated brass 15 mm weight not less then 330 gm , stop cock t type chromium plated brass 15 mm weight not less then 330 gm , brass chromium plated shower rose 100 mm dia with bend , bib cock long spout brass chromium plated 15 mm weight not less then 330 gm , pvc connection 45 cm long 15 mm , peg set of six fitted with galvanised screws along the internal surface of the walls in the rooms , corner sheet glass shelf with two shelf assembly consisting of 5 point 5mm thick sheet glass shelf with cromium plated brass bracket guard and railing , soap dish ss flat back complete with screw , 2000 ltrs anaerobic frp oblique lldpe septic tank , ppr pipe 32 mm dia , ppr pipe 20 mm dia , ppr socket 32 mm , ppr elbow 90 degree 32 mm , ppr elbow 20 mm , ppr female thread elbow 90 degree 20 mm dia , ppr female thread t 20 mm dia , ppr plain t 32 mm , ppr reducer t , ppr union 32 mm , tank connector 32 mm , pvc wall clamp 32 mm , pvc wall clamp 20 mm dia , float valve 20 mm , gate valve 32 mm , m seal 150 gm pkt , taflon tape roll , solvent cement 150 gm tube , pvc waste pipe 32 mm and 1m long , chromium plated waste coupling 32 mm dia , non skid ceramic tiles of size 300mmx300mm on the floor , ceramic tiles of size 600 mm x 600 mm for floor thickness between 9 to 10 mm thick , cp grating 100 mm dia , pvc pipe 110 mm dia 3 mtr long , pvc socket 110 mm dia , pvc bend110 mm dia , s trap vitreous china , curtain arrangement drapery and rod made of 25 mm dia and 1600 mm long , pvc air pipe 32 mm dia , white cement , vitreous china wash hand basin white of size 450mmx300mm with vitreous china pedestal of suitable size , ppr reducer elbow 32mm x 20mm dia , brass cp wall mixer for mixing hot and cold water screwed down for ppr pipe of dia 20mm , brass cp jet water spray for ewc , plastic dustbin of capacity 40 ltrs , distribution box 8 way spn 240 volts copper bus bar and neutral link earthing stud , mcb spn 240 volts 32 amps , mcb sp 6 to 32 amps , pvc tape 19mm wide 5 m long , cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conductor of size 1 point 5 sqmm single core , cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conductor of size 4 sqmm single core , cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conductor of size 2 point 5 sqmm single core , pvc casing capping of size 1 inch medium grade snow white , pvc casing capping of size 3 oblique 4 inch medium grade , switch piano 5 amp 230 volts flush type one way , led tube light fittings 15w 230v box type 4 feets with crca body pre coated white and prewired for led tuble complete , led mirror lights 1 feet 5 watts , steel screw full thread with rawl plug 1 1 oblique 2 inch size , pvc switch board snow white size 6 inch x 6 inch for sockets , pvc switch board snow white size 7 inch x 4 inch for sockets and switches , pvc switch board snow white size 8 inch x 10 inch for main switches oblique db , pvc l bend and t junction joint for pvc casing and capping confirming to is 3419 , switch socket combination snow white multipurpose 2 in 1 15 amp 230 volts , switch socket combination snow white 5 amp 230 volts , service bracket 40mm dia gi tubing medium grade 1 p
Tender For supply of set of thick web switch expansion joint (twsej) (up to 100 mm permissible movement at each end) as per rdso drg. no: t- 8822 alt.4, for cwr/lwr bg (1676 mm), rail type stock rail 1080hh switch 60e1a1, (excluding fittings & psc sleepers and including frieght charges and 18 % gst ) [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For goods, manufacturing and supply of improved switch expansion joint (complete set) with firm's rail as per rdso drawing no. is t-6922 (alt-5/latest alt.) with assembly (with all fittings including cgrsp) for long welded rail (with 65 mm max. gap) b.g.60e1 on psc sleepers. confirming to irs specification: irs/t-10-2025 with latest alt.(term-latest-wherever used will mean the alteration/amendments up to the 10 days prior to date of closing of tender) [ warranty period: 30 months after the date of delivery ]