Latest sanitary material Tenders | Government sanitary material Tenders

corporations/Associations/Others

CTN :45723859

15 Jul, 2026 NA

Pune - Maharashtra

Tender For supply of sanitary material for the year 2026-2027 - supply of sanitary material for the year 2026-2027, hard brooms (go brooms) each no.500 gram ( good quality ), soft bromms three legs (good quality), soft brooms long hair (phul zadu), sented phynel ( tiger make isi mark, napthalene ball colour (sented big size) isi mark, bleaching powder isi mark, nirma powder, hydrochloric acid isi mark, mop big size, table cleaning cloth 15 x22 , napkin, plastic dust bin 120 ltr. capacity no wheel ( nilkamal/isi make ), plastic dust bin 7 ltr. capacity ( nilkamal / isi make ), bars of hard brooms, wiper for floor cleaning with handle ( big size ), hand gloves good quality, toilet cleaner harpic, soap liquid ( hand wash ) dettol, toilet cleaner brush, mask good quality, room freshneer (godrej aer speay , lifebuoy soap 125 gram.(hindustan lever ltd.) each box 108 unit.

CTN :45734190

08 Jul, 2026 10.00 Lacs

Damoh - Madhya Pradesh

Tender For inviting rates for sanitary material supply for the financial year 2026-27 (iind call)

State Government

CTN :45633582

02 Jul, 2026 27.75 Lacs

Delhi - Delhi

Tender For corrigendum : provision of sweeping and brooming services, including supply and stacking of sanitary materials at the ncc building campus at safdarjung enclave.

CTN :45544339

29 Jun, 2026 NA

Delhi - Delhi

Tender For corrigendum : supply of vitreous china squatting pan orissa pattern size 580 x 440 mm white integral foot rest water closet , brass non return valve, 25mm bore , water storage pvc tank 500 ltrs cap triple layer ,heat retardant,uv protection, break resistant with threaded lid , corner glass shelf 10 inch x10 inch , european type ewc s trap , cp toilet paper holder , rotational three layered , white colour moulded polythylen water storage tank 1000 ltr , cast brass gate valve, with iron wheel head screwed both ends and for iron pipes and fixed for bore of pipe 15 mm , cast brass gate valve, with iron wheel head screwed both ends and for iron pipes and fixed for bore of pipe 25 mm. , cp 2 in 1 bib cock 15mm bore short body. , flushing cistern 10 ltrs capacity , hdpe water tank cover for 1000 ltr cap , threaded or hinges type , cast brass gate valve, with iron wheel head screwed both ends and for iron pipes and fixed for bore of pipe 20 mm. , curtain rod 20mm dia ss 2 mm thick , al bihari hinges , cp brass waste coupling 32 mm , gi dead plug 15 mm. , white cement in 01 kgs pack , looking mirror 600x450x4mm beveled edge , with 4 plugs, screw and gitti , gi tank nipple 15 mm , cp towel rail 750mm long, 20mm dia. , spindle brass for 15 mm bib cock , cp extension nipple 100mm long suitable for 15mm bore . , glass sheet 4 mm thick , half round piston for mixer , ss door handle 100 mm , gi pipe medium grade 15 mm with socket , cp brass soap disc , stainless steel butt hinges size 125 mm , door stopper brass 125 mm , hydraulic door closer universal type , gi nipple 15 mm x 50 mm , pvc waste pipe 32 x 750 mm long with flunge 40 mm superior quality , glazed oil putty * /bid number : gem/2026/b/7452728 + /dated: 13-06-2026 ' ' / bid document 1 / 30

State Government

CTN :45676048

02 Jul, 2026 36.57 Lacs

Bengaluru - Karnataka

Tender For annual maintenance & supply of materials, repairs to windows and doors, supply of water & sanitary fittings to sharavathi block, national games vilalge, koramangala, bengaluru from august-2026 to july-2027 (reserved for cat-iia)- item description: providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. , item description: providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. , item description: providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. , item description: providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.75x40x2.5 mm (ordinary type) , item description: providing and fixing isi marked oxidised m.s. tower bolt black finish, (bar- rel type) with necessary screws etc. complete : , item description: providing and fixing isi marked oxidised m.s. handles conforming to is:4992 with necessary screws etc. complete : 75mm , item description: providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. - 50mm , item description: providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc complete as per directions of engineer- in-charge , item description: providing and fixing brass stop cock of approved quality : 15 mm nominal bore , item description: providing and fixing brass full way valve gate with c.i. wheel of approved quality (screwed end) : 25 mm nominal bore , item description: providing and fixing unplasticised pvc connection pipe with brass unions : 30 cm length - 15 mm nominal bore , item description: providing and fixing c.p. brass shower rose with 15 or 20 mm inlet : 100 mm diameter , item description: providing and fixing c.p. brass bib cock of approved quality conforming to is:8931 , item description: providing and fixing c.p. brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 g. , item description: providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931 , item description: providing and fixing pillar cock made of stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - premium , item description: providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. internal work - exposed on wall - 20 mm nominal dia pipes , item description: providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. internal work - exposed on wall - 25 mm nominal dia pipes , item description: providing and fixing water closet squatting pan (indian type w.c. pan ) with 100 mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: white vitreous china orissa pattern w.c. pan of size 580x440 mm with integral type foot rests , ite

CTN :45592547

24 Jun, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of sanitary material eg. deluxe tingol annnol etc supply of sanitary material eg. deluxe tingol annnol etc for swm dept in k west - supply of sanitary material, deluxed anol, delux tingol, air freshner stick, 7 kisses air frehsner

CTN :45627779

29 Jun, 2026 NA

Palakkad - Kerala

Tender For material procurement - material work, stone aggregate(single size): 40+b14:b93 mm nominal size, stone aggregate(single size):20 mm nominal size, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), sundries, wall form panel 1250x500 mm, corner angle 45x45x5 mm 1.50 m long, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, m.s. tube 40 mm dia, twisted steel/deformed bars, stone aggregate(single size): 10 mm nominal size, stone for masonry work, solid blocks of size 30x20x20cm, wall form panel 1250x450xmm, corner angle 45x45x5 mm 2.50 long, column clamp 450x1070 mm, prop 2 m (2-3.5m), structural steel such as tees, angles, channels and r.s. joists, red oxide zinc chromate primer, adjustable telescopic prop 3 m (2.02-3.75m), beam clamp 300-380 mm (450-1070 mm), second class kail wood in planks, second class kail wood in scantling, hollock ballies 125 mm diameter, adjustable span eso+si (2.35-3.40), solid blocks of size 30x20x15cm, mild steel tubes electric resistant or induction butt welded, mild steel round bar 12 mm dia and below, flats up to 10 mm in thickness, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, factory made glass reinforced plastic door frame 90x45 mm i/c carriage, 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage, powder coated m.s. butt hinges 100 mm x58 mm x 1.9 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 20 mm, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), pvc pipe 110 mm outer dia 6kgf/cm2, pvc pipe 15 mm outer dia 10kgf/cm2, pvc pipe 32 mm outer dia. 10kgf/cm2, pvc pipe 40 mm outer dia. 10kgf/cm2, pvc pipe 63 mm outer dia . 6kgf/cm2, pvc vent cowl 63 mm dia, pvc vent cowl 110 mm dia, brass bib-cock-15 mm dia, pvc elbow 63 mm dia, pvc 45 degree elbow 63 mm dia, pvc door elbow 63 mm dia, pvc bend 63 mm dia, pvc tee 63x63x63 mm dia, pvc socket/coupling 63 mm dia, pvc elbow 110 mm dia, pvc 45 degree elbow 110 mm dia, pvc door elbow 110 mm dia, pvc bend 110 mm dia, pvc tee 110x110x110mm dia, pvc socket/coupling 110 mm dia, pvc pipe 25 mm outer dia . 12 kgf/cm2, vitreous china orrisa type w.c. pan size 580 mm, flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe), 100 mm s.c.i. trap with vent heel, black plastic seat (soild) with lid c.p.brass hinges and rubber buffers, vitreous china pedestal type wate closet, vitreous china flat back wash basin 550x400 mm, 15 mm c.p.brass tap, c.p. brass waste 32 mm, c.i. bracket for wash basin and sinks, stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm, semi rigid pvc waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c pvc waste fittings, polyethylene water storage tank with cover and suitable locking arrangemnet, fine sand (zone iv), vitrified floor tile 60x60 cm, ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., multi surface paint, special primer (c.w), black japan, synthetic enamel paint in black or chocolate shade, mild steel plates, g.i. pipes 40 mm dia, mild steel round bar above 12 mm dia, welding by electric plant, stainless steel (grade - 304) hollow section round/square tubes, stainless steel bolts /square bar and plates

State Government

CTN :45606471

29 Jun, 2026 19.39 Lacs

Barnala - Punjab

Tender For annual rate of contract supply of sanitary material for annual repair and maintenance for f/y 2026-27

State Government

CTN :45595794

08 Jul, 2026 9.94 Lacs

Doda - Jammu And Kashmir

Tender For repair and renovation of hospital at base camp including procurement of lab instruments chanderkote. - demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of engineer-in charge:1:3:6 or richer mix (i/c equivalent design mix), providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), providing upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm dia, repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead with cement mortar 1:4 (1 cement : 4 fine sand), providing and laying ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to is: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. in colour such as white, ivory, grey, fume red brown, providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete size of tile 600x600 mm, providing and fixing ply wood 5 ply with commercial ply on both faces 6 mm thick, dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead : upto 10 mm thick, providing and fixing wooden moulded corner beading of size 50x50 mm (base and height) of triangular shape to the junction of paneling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete. second class kail wood., providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :budloo / fir wood., providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws. first class kail wood 30mm, providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. with galvanized m.s. wire gauge with wire of dia 0.63 mm with 2nd class teak wood beading 62x19 mm, providing and fixing aluminum tower bolts isi marked anodized (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 150x10mm, providing and fixing aluminum handles isi marked anodized (anodic coating not less than grade ac 10 as per is: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 100 mm, providing corrugated g. s. sheet roofing including vertical/curved surface fixed with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2, providing and fixing white vitreous china pedestal type water closet (european type w.c. pan) with seat and lid, 10 liter low level white p.v.c. flushing cistern,