Latest santry post Tenders | Government santry post Tenders

corporations/Associations/Others

CTN :45343442

05 Jun, 2026 9.98 Lacs

Delhi - Delhi

Tender For annual repair m/o building in bm-i division during 2026-27.sh distempering, painting, finishing and other miscellaneous repair work under occupation/vacation under bapu dham service centre.

State Government

CTN :45329309

03 Jun, 2026 27.87 Lacs

Delhi - Delhi

Tender For day to day maintenance of guest houses and staff quarters by way of providing sanitary fittings, hardware fittings, finishing works, painting, polishing, wood work, repair work to civil and interiors and other allied works at jk house chanakyapuri, n

Central Government/Public Sector

CTN :45324560

16 Jun, 2026 85.78 Lacs

Visakhapatnam - Andhra Pradesh

Tender For project supply, installation, testing and commissioning of 20nos radar and accessories. sh civil works at yarada visakhapatnam phase-ii - extra for concrete work in superstructure above floor v level for each four floors or part thereof by mechnical means., reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)., steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. a) thermo- mechanically treated bars of grade fe-500d or more., centering and shuttering including strutting, propping etc. and removal of form for lintels, beams, plinth beams, girders, bressumers and cantilevers, brick work with non modular fly ash bricks conforming to is:12894, class designation 10 average compressive strength in super structure above plinth level up to floor v level in :cement mortar 1:4 (1 cement : 4 coarse sand), providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete., float glass panes 4 mm thick glass pane (weight not less than 10kg/sqm)., providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete., providing and fixing is : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :125x64x1.90 mm, fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately), providing and fixing factory made single extruded wpc (wood polymer composite) solid door/window/clerestory windows & other frames/chowkhat comprising of virgin pvc polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying pvc solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 n (face) & 1100 n (edge), minimum compressive strength of 58 n/mm2, modulus of elasticity 900 n/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with m.s hold fast/lugs/ss dash fasteners of required dia and length complete as per direction of engineer-in- charge. (m.s hold fast/lugs or ss dash fasteners shall be paid for separately). frame size 45 x 70 mm, providing and fixing factory made single extruded wpc (wood polymer composite) solid plain flush door shutter of required size comprising of virgin polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 n (face) & 900 n (edge), minimum compressive strength 50 n/mm2, modulus of elasticity 850 n/mm2 and resistance to spread of flame of class a category with property of being termite

State Government

CTN :45308147

03 Jun, 2026 14.00 Lacs

Udaipur - Rajasthan

Tender For miscellaneous finishing work at vc residence, mlsu

CTN :45334352

02 Jun, 2026 44.37 Lacs

Kolkata - West Bengal

Tender For a/r & m/o gpra (general pool residential accommodation) at 21, richi road & 7, marlin park, kolkata. during-2026-27. sh:- day to day maintenance work including garbage cleaning, repairing of plastering & finishing, wood work, painting, water supply, sanitary installation, cleaning of tanks and miscellaneous civil works.

CTN :45329078

09 Jun, 2026 6.09 Lacs

Jaipur - Rajasthan

Tender For work no 9 - construction of embankment with approved material obtained from borrow pit with all lifts and leads, transporting to site, spreading, grading to required slope and compacting by vibratory roller 8-10 tonne to meet requirement of table 300-2 including cost of compensation for earth taken from private land complete as per mort&h specification clause 305. (lead taken upto 5 km), providing and laying lean cement concrete 1:4:8 in sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in concrete mixer, laid manually, compacted with surface vibrator, finishing and curing complete as per clause 601, 112 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion., providing and laying un-reinforced, dowel jointed, plain cement concrete mix with concrete mixer & vibrator pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate conforming to is: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed as per approved mix design, laid, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, admixtures (if required) as approved, curing compound, finishing to lines and grades complete as per drawing and as per clause 602, 112 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. pcc m-20

State Government

CTN :45311997

03 Jun, 2026 14.00 Lacs

Udaipur - Rajasthan

Tender For miscellaneous finishing work at vc residence, mlsu

CTN :45318020

08 Jun, 2026 NA

Khurda - Odisha

Tender For supply of modification of computer lab - modification of existing wooden tables including cutting resizing strengthening fixing alignment and finishing , providing and pasting decorative printed stickers on the front side of tables including surface cleaning and smooth application , and providing fixing wooden platform of size 08 ft x 04 ft x 01 ft made of seasoned wood with proper framework , providing and pasting approved quantity sunmica laminate on wooden platform including adhesive edge finishing and cleaning , general wooden work carpenter labour tool and finishing including hardware

CTN :45032622

01 Jun, 2026 30.00 Lacs

Chhatarpur - Madhya Pradesh

Tender For inviting rates for procurement of civil work samgri for financial year 2026 to 2027 - metal 6 mm , including spreading murram, , centering shuttering ply bali, , centering shuttering iron plate pail, , chips of various sizes (40 mm thick), , stone dust, , jali grills etc. (complete with shutters, hinges etc.), , complete iron centering (including installation and dismantling), , brick (potter, local), , brick chimney (second class), , stone 20x20x20 cm., , wolder (oversize) 90 to 63 mm (local), , ballast (63 to 45 mm local), , ballast 40 mm (crusher), , ballast 20 mm (crusher), , sand local, , black soil, , cement isi mark 53 grade 50 kg velocity, , enamel paint (nerolac), , distemper (nerolac), , emulsion (nerolac), , interior paint (nerolac), , putty complete, , marble stone white, , marble stone black, , kota stone, , 8 gauge steel sheet, , 10 gauge steel sheet, , 12 gauge steel sheet, , 18 gauge steel sheet, , s west's sheet, , iron rod 8 ma,, , iron rod 10 ma,, , 12 mm iron rod, , iron rod 16 ma,, , angle, , gutter size wise, , oil distemper, , primer, , mixer machine (diesel, with driver), , soil dumping 01 km, , soil fikai 02 km, , soil fikai 03 km, , soil fikai 04 km, , jvc machine 03d, , lnt machine 200, , stanleys steel, , colour g.i. profile seat tata company 4x16, , steel roofing seat tata company 4x16, , complete with retro reflective seat board with writing and fittings, , tractor trolley (with diesel driver) up to two km, , dumper 03 sec capacity (including diesel driver) up to 2 km, , dumper 04 cc capacity (with diesel driver upto, , pvc false ceiling paneling work, , p.v.c. wallpapering work, , acp paneling single colour, , acp paneling wooden colour, , aluminum window and door 3 trucks complete with glass, , aluminum window and door 2 trucks complete with glass, , aluminum partition complete, , aluminum door closer, , complete with 12mm coach with fittings, , 08 mm coach complete with fittings, , wpc door 25 mm thickness, , wpc door 30 mm thickness, , wpc door frame 24.6 feet long, , granite stone, , forged gi chain link for fencing, , facing gi bonded wire, , 40x40x6 including sliding shutter frame, , white mica sheet, , color mica sheet, , fevicol, , nail 02 inch, , nail 01 inch, , mica tape, , pop false ceiling, , firewood, , rcc chair, , lawn mower, , godrej almirah buddy 20 gauge, , godrej almirah small 20 gauge, , box box large 20 gauge, , box box left 20 gauge, , ply 10 mm, , ply 12 mm, , ply 18 mm, , ply 19 mm, , hilti on rent with lever, , pcc m-15 complete, , rcc above m-20 plinth, , below the shuttering plinth, , above shuttering plinth, , tmt bar with binding as required, , aluminium work with 4mm glass in any size and shape with complete finishing, , aluminium work with 6mm glass in any size and shape with complete finishing, , rcc hume pipe np3 1200 mm, , rcc hume pipe np3 1000 mm, , rcc hume pipe np3 600 mm, , rcc hume pipe np3 400 mm, , rcc hume pipe np3 200 mm, , rcc hume pipe np3 100 mm, , rcc hume pipe np2 1200 mm, , rcc hume pipe np2 1000 mm, , rcc hume pipe np2 600 mm, , rcc hume pipe np2 400 mm, , rcc hume pipe np2 200 mm, , angle frame banners, , pipe frame banner wall, , pavers 60 mm, , pevse 80 mm, , pevse 100 mm, , pre cast conduit 30x.45, , pre cast conduit .45x.45, , pre cast conduit. 45x.60, , rcc cover for drain 75x.80x.10 cm, , rcc cover for drain 0.60x.80x.10 cm, , chamber iron, , pvc profile seat

State Government

CTN :45303841

30 May, 2026 2.03 Crore

Delhi - Delhi

Tender For improvement of external surface including chajja repair and finishing work and essential upgradation work of da flats timarpur complex delhi

Santry Post Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

Central Government/Public Sector

State Government

State Government

State Government