Latest saw cutter Tenders | Government saw cutter Tenders

State Government

CTN :45718092

14 Jul, 2026 NA

Ganderbal - Jammu And Kashmir

Tender For supply of aluminium brazing rod standard length , copper brazing rod standard length , petrol operated chain saw , crimping tool box , aluminium compression lugs and thimbles 300 sq.mm and 400 sq.mm , aluminium compression lugs and thimbles 240 sq.mm , t oil as per standard is 335

CTN :45708339

29 Jun, 2026 NA

Surat - Gujarat

Tender For repair of petrol operated power chain saw machine ms 230, vimal, electric chain saw, petrol generator 2kv machine received, total number-09 machines

Corporations And Associations And Others

CTN :45692936

02 Jul, 2026 1.99 Lacs

Delhi - Delhi

Tender For supply of petrol lawn mower, hedge shear, petrol bush cutter, chain saw and looper for use of horticulture works in mpl. parks wazirpur j.j. colony in ward no. 66/kpz

CTN :45674965

02 Jul, 2026 1.90 Lacs

Vizianagaram - Andhra Pradesh

Tender For supply and delivery of tools & plants for horticulture wing of vizianagaram municipal corporation under general funds est.cost.rs.2.30 lakhs.- petrol chain saw make sthil - model - ms 250 with 18 inch bar & chain its equivalent make with above specification , providing and supplying saw chain suitable for stihl ms 256 petrol chainsaw or equivalent make, including transportation, loading, unloading, and all incidental charges, complete in all respects as directed by the engineer-in-charge. , providing and supplying saw chain suitable for stihl ms 382 petrol chainsaw or equivalent make, including transportation, loading, unloading, and all incidental charges, complete in all respects as directed by the engineer-in-charge. , supply and delivery of following tools and plants for the horticulture wing to the cut the gross/trees and pruning of plants and trimming of bushes and for other works of standard make and best quality including cost of all materials, transportation charges, conveyance charges including cost and conveyance of all materials and all labour charges etc., complete as directed by the officers incharge petrol chain saw make sthil - model - ms 382 with 25 inch bar & chain its equivalent make with above specification

Central Government/Public Sector

CTN :45681600

06 Jul, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply, testing & commissioning of petrol driven power chain saw cutter. specifications (i) two stroke petrol driven air cooled (ii) output power - 6 hp (iii) engine speed at no load (in rpm) - 12000 - 14000 (iv) fuel tank capacity - 0.7 ltrs - 1.0 ltrs (v) guard bar length - 20 inch (vi) type of blade - carbide tipped blade (vii) type of fuel - petrol (viii) weight (kg) - 5 kg - 8 kg (ix) make - makita/bosch/stihl or similar. warranty period 30 months from the date of supply. [ warranty period: 30 months after the date of delivery ] ]

CTN :45678851

16 Jul, 2026 42.88 Lacs

Dehradune - Uttarakhand

Tender For procurement of day to day electrical maintenance material - electric male female connector , 6 amp 3 pin top , 16 amp 3 pin top , pvc insulation tape roll 3 meter , ht tape 3 meter , 6 sq mm ring type copper lugs , 6 sq mm pin type copper lugs , 10 sq mm pin type copper lugs , 10 sq mm ring type copper lugs , 16 sq mm ring type copper lugs , 16 sq mm ring type aluminium lugs , 25 sq mm ring type aluminium lugs , 35 sq mm ring type aluminium lugs , 50 sq mm ring type aluminium lugs , 150 sq mm ring type aluminium lugs , 300 sq mm ring type aluminium lugs , 16 sq mm tubular lugs copper , 16 sq mm tubular lugs aluminium , 63 amp 4 pole mccb 25k , 100 amp 4 pole mccb 36k , 125 amp 4 pole mccb 36k , 40 amp. mcb 4 pole , 63 amp. mcb 4 pole , 32 amp. mcb 2 pole , 40 amp. mcb 2 pole , 10 amp mcb 1 pole , 16 amp mcb 1 pole , 25 amp mcb 1 pole , 1.5 sq.mm copper wire frls r,y,b, black colour , 2.5 sq.mm copper wire frls r,y,b, black colour , 4 sq.mm copper wire frls r,y,b, black colour , 6 sq.mm copper wire frls r,y,b, black colour , 10 sq.mm copper wire frls r,y,b, black colour , 1.5 sq.mm 3 core copper flexible cable , 2.5 sq.mm 3 core copper flexible cable , 4 sq.mm 3 core copper flexible cable , 6 sq.mm 3 core copper flexible cable , 6 sq.mm 4 core copper flexible cable , 10 sq.mm 3 core aluminium flexible cable , 10 sq.mm 4 core aluminium flexible cable , 16 sqmm 4 core aluminium armoured power cable , 25 sqmm 4 core aluminium armoured power cable , 35 sqmm 4 core aluminium armoured power cable , 16 amp combined box , 6 amp combined box , 25 amp ac combined box with top , power extension board with 4 meter cord , multiplug 5 amp universal type , 32 amp mcb 1 pole , pvc batten 20 mm 6 feet each , pvc batten 25 mm 6 feet each , pvc batten 50 mm 6 feet each , pvc flexible conduit pipe 20 mm. 3 meter , pvc flexible conduit pipe 25 mm.3 meter , pvc flexible conduit pipe 32 mm. 3 meter , pvc cable clip 10 mm , 4 way tpn db. d.door , 8 way spn db d. door , 6 way spn db d. door , elen key set , hole saw cutter 10 to 300 sqmm , jonior hexa frame , jonior hexa blade , hexa frame , hexa blade , grinder machine , grinder blade , pin type anchor fastner 6x75 mm , pin type anchor fastner 8x100 mm , pin type anchor fastner 10x100 mm , m10 hexagon head red anchor fastener,10x100 mm , gypsum screw 1.5 inch , gypsum screw 2 inch , gypsum screw 4 inch , pvc gitti 35x8 50 nos per pkt , pvc gitti 50x8 50 nos per pkt , self screw 1.5 inch , batten nails 100 nos per pkt , pvc saddle 25mm 100 nos per pkt , pvc saddle 20mm 100 nos per pkt , pvc saddle 32mm 100 nos per pkt , mild steel span bolt and nut 12mmx 80mm , mild steel span bolt and nut 10 mmx 50 mm , mild steel span bolt and nut 18 mmx 80 mm , mild steel l-key bolt and nut 16 mmx 50 mm , flexible metalic conduit size 25-32 mm , nylon cable tie, length 200x3.6mm 100 nos perpkt , nylon cable tie, length 250 x 4.2 mm 100 nos per pkt , nylon cable tie, length 300mm x 4.6mm 100 nos per pkt , nylon cable tie, length 100 x 2.5 mm 100 nos per pkt , nylon cable tie, length 150 x 2.5 100 nos per pkt , led bulb 9w color temp 6500k , hammer bit 6mm , hammer bit 8mm , hammer bit 10mm , hammer 12mm , drill bit set 1.5-6mm , pvc bend pipe25mm 20 nos per packet , small size goti set 0.25 inch drive socket set , hydraulic crimping tool 16-300 sqmm , electric bell ding dong , uv light 18 watt 2 feet , exhaust fan 9 inch metallic body , exhaust fan 12 inch metallic body , geyser thermostat , contactor 4 pole 40a, 220v , analog timer smps 12v

Corporations And Associations And Others

CTN :45651274

29 Jun, 2026 1.99 Lacs

Delhi - Delhi

Tender For procurement t and p items for ward no. 151 (munirka) south zone - supply of telescopic pole pruner:-specification:-pole length including blade: 6.5mblade material: hardened & tempered high carbon steel. the head of the blade shall have a hooked tip useful for cutting twigs saw blade shape: hooked type curved sawblade type & no of cutting teeth: tripple grounded 86 teeth blade length: 15"-16" pole type: light weight telescopic tubular aluminum alloy extendable pole no of positions for pole height adjustment: 10 positions locking mechanism: ergonomicvally designed two way locking mechanismtotal working length: max 219"(6623 mm), mln 103" (3103mm) branch cuttingcapacity: 200mm max, petrol operated brush cutterengine: single cylinder, 2 stroke, aircooled onlyengine displacement: 40.2ccpower output: 2kw/2.7hpmax output shaft speed at cuttingattachment: should be minimum 9000 rpmcarburetor: diaphragm with compensator technology.fuel tank capacity: minimum 600 ml.weight(dry, without cutting attachment & deflector): should not be more than 7.5 kg clutch: centrifugal type, clutch shoe support base & lining metal only. multi function handle: should have acceleration, on/off switch at right handle. brushcutter harness: should be double shoulder harness only. anti vibration system: must have 4- point aniti vibration system. vibration level in m/s2 at right handle: should not be more than 2.5 m/s2 sound pressure level db(a): should not be more than 105 db(a) drive shaft design: must have drive shaft ends square design type only.certification: must have valid en certification, telescopic petrol operatedpole prunerengine: single cylinder, 2 stroke, air cooled onlydisplacement: should be between 25-30 ccpower output: should be minimum 1.2 hpweight (dry without cutting attachment & fuel): should not be more than 7.5 kgfuel tank capacity (ml): should be minimum 400mlchain oil capacity (ml): must have minimum 200 ml.clutch: clutch shoe linining should be metal only.guide bar length: minimum 30cmguide bar and chain: should have same manufacture onlychain type: every drive link need groove & small oil holes for better lubrication. saw chain pitch should be 1/4" or 3/8picco only and drive link thickness must have 1.1 mm or 1,3 mm.max. output shaft speed (rpm): should be minimum 8000 rpm at chain sprocket.equipment total length with guide bar and chain (cm): should be minimum 220 cm - compressed & total length of equipment -minimum 350 cm - extended.sound pressure level (db/a): should not be more than 95 db(a)vibration measurement m/s2 at control handle extended position: should not be more than 5.5 m/s2certification: must have tuv certification with test standard en iso 11680, petrol operated chain sawengine : single cylinder, 2stroke, aircooled onlydisplacement: 45.4cc poweroutput: 2.3kw. 3.0 hpmax. engine speed (with guide bar & chain): at least 12500 rpmcarburetor: diaphragm type compensator technology.fuel tank capacity: should be minimum 450 ml.dry weight(without cutting attachment):should not be more than 5.0 kgclutch: clutch shoe linining metal only.guide bar design: should be rollomatic type.guide bar length: guide bar length must have 50 cm/20" inch.guide bar and chain: should have same manufacture only.chain type: every drive link require groove & small oil receiver hole for better lubrication. 0.325 inch pitch & 1.6 mm thickness only. chain lubrication system: fully automatic speed controlled rotary oil pumpchain oil tank capacity: should be minimum 200 ml.oil pump drive: should have direct drive from crankshaft & oil pump flow adjustable.master lever control: must have all operation in one hand, chock, throttle, acceleration, switch off.guaranteed sound power level: should not be more than115 db(a). maximum chain velocity to iso 11681: should be minimum 28 m/s. certification: product should have valid dplf certificate with test standard en iso 11681, supply pvc pipe 1" dia made up of 1st grade

Central Government/Public Sector

CTN :45652927

03 Jul, 2026 NA

Puttur - Andhra Pradesh

Tender For supply of petrol driven two stroke chain saw tree cutting machine (stihl ms 26194t) or similar [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45346322

29 Jun, 2026 6.10 Lacs

Jalandhar - Punjab

Tender For bid to ras supply of slotting saw cutter size 0.8 by 75 by 25.4 mm , slotting saw cutter size 1.5 by 75 by 25.4 mm , slotting saw cutter size 1.2 by 75 by 25.4 mm , slotting saw cutter size 1 by 75 by 25.4 mm , angular cutter 45 degree both side , angular cutter 60 degree both side , t slot cutter size 6 by 10 by 2 shank by dia by width , t slot cutter size 12 by 28 by 10 shank by dia by width , t slot cutter size 12 by 18 by 8 shank by dia by width , milling vice swable base standard size , end mill cutter 30 mm , tap size 7 by 32 into 56 tpi , die size 7 by 32 into 56 tpi , tap size 6 into 1 mm pitch , tap 4.8 into 32 tpi , ring spanner set stanley set 12 pieces , taparia socket set 8 mm to 32 mm ratchet handle goti set , breeze deluxe 450 mm hand leaver shearing machine b4ds18 , angle grinder bosch 4 inch gws 800 , tong smith 18 inch shandasi , wire cutter 8 inch , holder arc welding machine 800 a , impact screw driver set taparia , digital micrometer mitutoyo 0 to 25 mm , gas welding torch big esab , oxygen gas regulator two stage esab , d a gas regulator two stages , digital multimeter , glue gun 200 watts , screw driver 10 inch taparia two way , screw driver 04 inch taparia two way , die handle 21 mm inner dia , tap handle 08 inch , thread gauge in inches mitutoyo , thread gauge in millimeter mitutoyo , center drill 01 mm , center drill 1.5 mm , center drill 02 mm , drill bit 4.5 mm , drill bit 5.2 mm , drill bit 5.3 mm , drill bit 5.50 mm , drill bit 03 mm , drill bit 5.7 mm , tap 5 into 0.8 mm pitch , tap 4 into 0.7 mm pitch , die 6 into 1 mm , cardless electric screw driver with r by f function led light and 43 pcs accessories 240 rpm , drill chuck with key and arbor mt 2 shank 1 to 13 mm capacity heavy duty , hss toll bit 1 by 2 into 4 inch , cutting blade 14 inch bosch , cutting blade 04 inch bosch , grinding wheel 04 inch bosch , emery paper no 80 roll , vernier caliper bty 3 v lithium coin , power hacksaw blade 400 into 32 into 1.6 mm , hacksaw blade 24 tpi , hacksaw blade 32 tpi , mini hacksaw blade , file handle plastic , grinding wheel 10 inch rough , grinding wheel 10 inch smooth , diamond dresser grinding wheel , hss tool bit 1 by 2 into 6 inch miranda , hss tool bit 1 into 8 inch miranda , hss tool bit 5 by 16 into 6 inch miranda , hss tool bit 1 by 4 into 4 inch miranda , locktite 495 , lifeboy shop , duco thinner , shalimar normal thinner , squirrel hair mop brush , d battery 1.5 v , white paint 100 gm pack , red paint 100 gm pack , kerosene oil , gas mask , bulb 60 watts , machine cleaning brush 02 inch , painting brush 02 inch , painting bruch 01 inch , emery paper no 220 roll , thinner trisul 01 ltr pack , asian paint white 01 ltr pack , asian paint og 01 ltr pack , asian paint black 01 ltr pack , red oxide primer 01 ltr pack , cotton waste , welding rod no. - 10 esab , gas lighter welding works , illuminator 20 watts , soap hand wash , goggles for grinding machine , total auto darking welding goggle tsp 9403 , gas hose pipe 08 mm wp 15 kg blue , gas hose pipe 08 mm wp 15 kg red , brass brazing rod 1 by 16 inch , plastic container 01 ltrs capacity , file cord wire brush small , pencil cell aa battery , remote cell aaa battery , file flat bastard 12 inch , file flat bastard 10 inch , file flat smooth 10 inch , file half smooth 8 inch , file flat bastard 8 inch , file flat smooth 8 inch , needle file set 12 pcs set , file flat bastard 6 inch , file flat smooth 6 inch , file flat bastard 4 inch , file triangular smooth 6 inch , file half round bastard 8 inch , file round bastard 10 inch , file diamond flat 6 inch , file triangular diamond 6 inch , allen key set 1.5 to 12 mm , lever oil can heavy duty //bid details 2 / 69 lever oil can heavy duty

Corporations And Associations And Others

CTN :45651270

29 Jun, 2026 1.99 Lacs

Delhi - Delhi

Tender For supply of t and p items for ward no. 155 (mehrauli) south zone - supply of telescopic pole pruner:-specification:-pole length including blade: 6.5mblade material: hardened & tempered high carbon steel. the head of the blade shall have a hooked tip useful for cutting twigs saw blade shape: hooked type curved sawblade type & no of cutting teeth: tripple grounded 86 teeth blade length: 15"-16" pole type: light weight telescopic tubular aluminum alloy extendable pole no of positions for pole height adjustment: 10 positions locking mechanism: ergonomicvally designed two way locking mechanismtotal working length: max 219"(6623 mm), mln 103" (3103mm) branch cuttingcapacity: 200mm max, petrol operated brush cutterengine: single cylinder, 2 stroke, aircooled onlyengine displacement: 40.2ccpower output: 2kw/2.7hpmax output shaft speed at cuttingattachment: should be minimum 9000 rpmcarburetor: diaphragm with compensator technology.fuel tank capacity: minimum 600 ml.weight(dry, without cutting attachment & deflector): should not be more than 7.5 kg clutch: centrifugal type, clutch shoe support base & lining metal only. multi function handle: should have acceleration, on/off switch at right handle. brushcutter harness: should be double shoulder harness only. anti vibration system: must have 4- point aniti vibration system. vibration level in m/s2 at right handle: should not be more than 2.5 m/s2 sound pressure level db(a): should not be more than 105 db(a) drive shaft design: must have drive shaft ends square design type only.certification: must have valid en certification, petrol operated chain sawengine : single cylinder, 2stroke, aircooled onlydisplacement: 45.4cc poweroutput: 2.3kw. 3.0 hpmax. engine speed (with guide bar & chain): at least 12500 rpmcarburetor: diaphragm type compensator technology.fuel tank capacity: should be minimum 450 ml.dry weight(without cutting attachment):should not be more than 5.0 kgclutch: clutch shoe linining metal only.guide bar design: should be rollomatic type.guide bar length: guide bar length must have 50 cm/20" inch.guide bar and chain: should have same manufacture only.chain type: every drive link require groove & small oil receiver hole for better lubrication. 0.325 inch pitch & 1.6 mm thickness only. chain lubrication system: fully automatic speed controlled rotary oil pumpchain oil tank capacity: should be minimum 200 ml.oil pump drive: should have direct drive from crankshaft & oil pump flow adjustable.master lever control: must have all operation in one hand, chock, throttle, acceleration, switch off.guaranteed sound power level: should not be more than115 db(a). maximum chain velocity to iso 11681: should be minimum 28 m/s. certification: product should have valid dplf certificate with test standard en iso 11681, supply of lawn mower:-specification:- type of machine walk behind lawn mowers power sourcepetrol engine engine displacement 224ccstart type recoil / pull start, speed control variable speeddrive type all wheel drivel blade style rotary typeblade engagement electromagnetic, cut width (mm) 525 to 549, minimum cut height 20 millimetermaximum cut height 80 millimeter, blades hardened steelnumber of blades 1, number of positions for cut height adjustment 6, number of levers for cut heightadjustment: single lever, number of wheels 4front wheel size 203 millimeter, rear wheel size 250 millimeter, wheel tyres pneumaticif yes, grass catcher / collector / bag volume 70 liter, "engine power rating (watt)" 4000 to 4999, engine fuel tank capacity 1.4 ltr., supply pvc pipe 1" dia made up of 1st grade pvcspecification:- braiding with material of braiding: polyesterinner diameter(id) (mm) 25 length of pipe in a coil (in mtr.):30 wall thickness(in mm):3 color: transparent, bamboo broom with wooden handle and iron ring, supply of hessian cloth as per officer in charge

Saw Cutter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Corporations And Associations And Others

Central Government/Public Sector

Corporations And Associations And Others

Central Government/Public Sector

Central Government/Public Sector

Corporations And Associations And Others