Latest scanning probe Tenders | Government scanning probe Tenders

corporations/Associations/Others

CTN :45328177

05 Jun, 2026 62.00 Lacs

Kaushambi - Uttar Pradesh

Tender For supply of materials and erection for shifting of control room pannel at 33/ 11 kv sub station bharsawa distt. kaushambi under deposit scheme on turnkey basis under edc, kaushambi - name of work: supply, carriage & erection of materials for control room pannel shifting of shiffting of 33/11 kv s/s bharsawa distt. kaushambi, supply of centralised materials, 11 kv switch gear 600/300/5a 350 mva i/c, 11 kv switch gear 200/100/5a 350 mva o/g, 11 kv 3x300 mm2 xlpecable, 11 kv 3x120 mm2 xlpecable, 24 volt battery, 24 volt battery charger, pcc. 8.5 mtr. long for feeder, 11 kv tpmo switch with fixing clamp, 11 kv top channel, 11 kv dropper angle, earthing complete, stay set complete, 11 kv polymer pin insulator, 11 kv polymer disc insulator, 11 kv disc fiting, 33 kv control panel t/f, acsr weasel conductor, supply of de-centralised materials, 11 kv 3x120 mm2 xlpe cable jointing kit o/d & i/d, control cable 4x2.5 mm2, control cable 2x2.5 mm2, g.i. pipe 6 " dia, rubber matting, clamp with nut & bosts, earth wire clamp for pcc pole, stay clamp for pcc pole, top channel clamp pcc pole, dropper channel clamp pcc pole, g.i. strip 35x6 mm, carriage of following material, pcc pole 8.5 mtr. long., structure of la, 33kv isolator, 33 kv cts, single t/f control pannel, 33kv vcb,11 kv outgoing. incoming pannel, battery & battery charger and other associated accessiories etc. (availibility at concern store center of store division), erection work, installation of 33 kv single transformer control pannel 2 no., incoming 2 no. and 7 no. outgoing in the switchgear room and grouting the pannel by rag bolt using cement, sand mortar in ratio 1:3. work includs fitting of all accessories in all respect with complete connection of control cable with pannel. all material will be provided by the contractor except vcb and crp., construction of cable trenchs with top cover and laying of control cable for vcb, c.t. & t/f control pannel etc. as per direction of engineer. trenchs to be 12 wide and 9 deep. work includes digging, of trench, concreting of the foundation in the ratio 1:3:6 r.b. wall 9 wide with cement mortar 1:4 and plastering inside the trench in the ratio 1:3 and sand filling in the trench. all material will be provided by the contractor., earthing of 11 kv indoor equipments, switchgears as per resspo drawing. with g.i. strip of size 35x6 mm. g.i. strip fully welded at both ends and to be connected with earthmat,, erection of dp with pcc pole 8.5 mtr long with all accessaries and grouting of the pcc pole with cement, sand and brick ballast ratio 1:4:8 size 0.45x 0.45x 1.5 mtr deep under the ground as per drawing no. res-6.(cement, sand, brick, ballast shall be provided by the contractor.), installation of 24 volt battery and battery charger with cabinet in the switch gear room, by grouting base channel 100 x 50 x 6 x 1000mm. fixing of rag bolt., laying of 11 kv 3x300/3x185/ 3x120 sqmm. xlpe cable by digging 0.75 mtr. deep trench, putting layer of sand in the bottom, ramming it, laying of cable over it rmt and covering the cable from sides and top by laying bricks, finally covering the same by earth and levelling of the same, all the materials, except cable, will be pvovided by the contractor., fixing and termination of outdoor/ indoor heat shrinkable cable boxes of size 3 x300/3x185/3x120 sqmm. xlpe cable. boxes will be supplied by the contractor, sundries ( as per site requirement/emergency work), safe dismantling of 11 kv o/g pannel & received back to store, laying of weasel conductor with the help of aluminium roller by hanging three nos. on each support in a manner taking sufficient care to ensure safety of weasel conductor against rubbing on ground, precaution for safety of crops is also to be taken. the work includes jointing of conductor by providing jointing sleaves, stringing of conductor upto correct sag and binding of conductor with insulators on each support. all material shall be provided by contractor such as join

CTN :45329379

16 Jun, 2026 NA

Bandipora - Jammu And Kashmir

Tender For stage contract for supply of workshop/line material as and when required during financial year 2026-27 or till next contract gets finalised - electrical store/workshop items/: as per is standards and kpdcl approved vendors only wherever applicable, bush rods 12mm(lt) of standard make, bush rods 19mm(lt) of standard make, bush rods 25mm(lt) of standard make, bush rods 30mm(lt) of standard make, ht bush for dts of standard make(33/11kv as per requirement and relevant is), lt bush set for 250kva dt of standard make, lt bush set for 63kva dt of standard make, lt bush set for 100kva of standard make, aluminum thimbles 95sqmm of standard make, aluminum thimbles 120sqmm of standard make, aluminum thimbles 185sqmm of standard make, aluminum thimbles 240sqmm of standard make, aluminum thimbles 300sqmm of standard make, soldress clamp for 630kva, soldress clamp for 400kva of standard make, soldress clamp for 250kva of standard make, soldress clamp for 100kva & 63kva, gi channel/angle/flat/clamps of sizes (as per requirement), gi v cross-arm with top bracket including clamp(2 nos), 11 kv gapless surge arrestor,9 kv ,10 ka ,la with polymer housing, stn. type, 11kv go, ab switch 3-phase, 3-pole, 200 amp, vertical type, 11 kv horn gap fuse set 3 phase 200a, 11 kv heavy duty link set (polymer) line type with 6mm copper blade and 02 no. 8ft. gi channel, clamps and nuts and bolts, 11 kv pin insulators (polymer/porcelain) with pins(5kn), 11kv polymeric composite disc insulator 12kv,min failing load 45kn, lighting impulse 75kv positive and 80kv negative, creepage distance 320mm, lt shackle with mukhi clamps including gi nuts & bolts, gi nuts & bolts of sizes with full thread, manilla rope, gi wire 8 swg, suspension/tension clamp with eye hook as per kpdcl standards, insulating piercing connector (10-95sqmm), straight through cable jointing kit for 35/50sqmm ltab, straight through cable jointing kit for 75/95/120sqmm ltab, heat shrinkable outdoor cable termination kit, 50sqmm lt ab cable (3x50+1x16+1x35) sqmm xlpe (1.1kv, 3+1c, al), 35 mm ab (ht) cable (3x35+1x35 mm ) xlpe, dpc aluminium of sizes 13/14/16/18swg of standard make, super enamelled(se) of sizes 13/14/16/18/21swg of standard make, lathoride paper 10 mil of standard make, exchange of 1kg fresh al dpc by scrap dpc, exchanege of 1 kg fresh bush rods by scrap bush rods, lathoride paper 20 mil of standard make, ht paper 3 mil of standard make, hard card board 1/1.5/2/3mm of standard make, fiber tubes of standard make, cotton tape/ nawar of standard make, cork washers (32x12)5mm, cork washers (50x28)5mm, cork washers (110x74)5mm, cork washers (45x20)5mm, cork washers (60x32)5mm, cork washers (70x45)5mm, cork washers (90x50)5mm, cork sheets(24x36) 3 mm, cork sheets(24x36) 4mm, cork sheets(24x36) 5mm, cork strip(40x3) mm, cork strip(40x5) mm, oil seals for 250kva of standard make, oil seals for 100kva & 63kva of standard make, m seal, cotton tap 1" size (length 35 meter), nawar tap 1 size 35 meter long, tape roll pvc, old saree/doti cloth, insulating gum of standard make, aluminum strip of sizes (3/6, 3/7, 4/8, 4/10 mm etc ) of standard make, rubberized cork sheet 4mm thick, 2 feet *3 feet, rubberized cork sheet 3mm thick, 2 feet *3 feet, ht brown paper 3.0/2.5 mil, packing sheet (1mm)press card board 1/2/3mm, synthetic enamel paint grey colour, varnish dr.beck/empire, glass wool sleeves of sizes, fevicol, backlite tubes 1/2 inch,(1mtr length), packing gutties, electrical grade kraft paper,4mil, rubber washers ( m-12 ht oil seal),, rubber washers ( m-12 lt oil seal),, rubber washers ( m-16 lt oil seal),, rubber washers ( m-20 lt oil seal),, rubber washers ( m-25 lt oil seal),, rubber washers ( m-30 lt oil seal),, fiber glass sleeves 2mm, fiber glass sleeves 3mm, fiber glass sleeves 4mm, fiber glass sleeves 5mm, fiber glass sleeves 6mm, fiber glass sleeves 8mm, fiber glass sleeves 10mm, fiber glass sleeves 12mm, fiber glass sleeves 15mm, oxygen cylinder for welding with water c

Central Government And Public Sector

CTN :45349608

17 Jun, 2026 22.27 Lacs

Tiruvallur - Tamil Nadu

Tender For supply of vitek 2 gn id make biomerieux 21341 , vitek 2 ast n406 biomerieux 423869 , vitek 2 ast n405 biomerieux 423864 , vitek 2 gp id make biomerieux 21342 , vitek 2 p628 make biomerieux 414534 , vitek saline bottles 0.45 percentage , vitek unsensitized tubes biomerieux 69285 , taq dna polymerase invitrogen 11615010 , dntp set 100mm ea invitrogen 10297018 , 100 bp dna ladder invitrogen 15628019 , 0.1 microlitres tips 96 tips per rack 10 rack per pack , 100 to 1000 microlitres tips 100tips per rack 10 rack per pack , 2 to 20 microlitres tips 96 tips per rack 10 rack per pack , 2 to 200 microlitres tips 96 tips per rack 10 rack per pack , conditioning reagent for 3500 seqstudio flex , bigdye terminator v1.1 and v3.1 5x sequencing buffer 1ml , bigdye terminator v3.1 cycle sequencing kit 100 reactions , hi di formamide 5mlx1 , cathode buffer container cbc for 3500 seqstudio flex 4ea. , anode buffer container abc for 3500 seqstudio flex 4ea. , pop 7 polymer for 3500 seqstudio flex 384 samples , microamp fast optical 96 well reaction plate 0.1 ml 10 per pack , microamp fast optical 96 well reaction plate with barcode 0.1ml 20 per pack , septa cathode buffer container for 3500 and seqstudio flex 10 containers , septa for 96 well plates for 3500 seqstudio flex 20 ea. , microamp fast 8 tube strip 0.1ml 125strips 8tubes per strip , microamp optical 8 cap strips , 2 x red dye pcr master mix ) /bid number : gem/2026/b/7567797 * /dated: 27-05-2026 & & / bid document 1 / 46

corporations/Associations/Others

CTN :45321766

15 Jun, 2026 45.73 Lacs

Paonta Sahib - Himachal Pradesh

Tender For procurement of electrical spares and consumables for 220 kv and 33kv switch yard at khodri power station - 245 kv lightening arrester, discharge current 10ka, frequency 50 hz,pressure relief class 40 ka(rms), long duration discharge class 3, m.c.o.v. 56 kv, make: oblum electrical industries pvt. ltd. /cg power and industrial solution ltd. or eq make as approved by engineer in charge., 145 kv lightening arrester outdoor type ,suitable for 145kv system voltage , discharge current 10ka, freq. 50 hz, high current impulse (4/10 s) 100 ka, rated lightning impulse withstand voltage 1.2/50 s - 650 kvp, polymer based (single phase) make-oblum electrical industries pvt. ltd. /cg power and industrial solution ltd,/ htachi / siemens india ltd or eq make as approved by engineer in charge., auxiliary switch (stack) 5no + 5nc, 220v, dc, make: crompton, hitachi or eq make as approved by engineer in charge for 220kv cgl make sf6 circuit breaker., surge monitor/surge counter with leakage current meter suitable for 220 kv lightening arrestor , make: cg power and industrial solution ltd./ oblum electrical industries pvt. ltd., 33kv ct indoor type , 3 core, 15va each, ratio 650-350/1 a + 1a , class 0.2s(2 core metering) & 5p10 (protection), str: 25ka for 3 sec. make siemens, crompton, hitachi or eq make as approved by engineer in charge., 33kv ct indoor type, 3 core, 15va each, ratio 300-150/1 a + 1a , class 0.2s( 2 core metering) & (5p10 protection, str: 25ka, for 3 sec. make siemens, crompton, hitachi or eq make as approved by engineer in charge, control motor, type c21, 2.6 a, 230v ac/dc, o/p 0.3kw, sr. no: 042-901, m/y 03/08, 750/ min. make: kpt shirol or eq make as approved by engineer in charge for 33kv cgl make indoor type sf6 circuit breaker., auxiliary switch 7no+6nc (stack), 250 volt dc, make: crompton, hitachi or eq make as approved by engineer in charge for 33kv cgl make indoor type sf6 circuit breaker., auxiliary switch 8no+ 8nc, 220v, dc, (motor drive ). make: abb/ hitachi or eq make as approved by engineer in charge for 245 kv, abb make isolator., 220 v, dc, close or trip-1 coil ( part no. exin - 400834 - r9)make: abb/hitachi or eq make as approved by engineer in charge for 145kv, abb make sf6 breaker., rectifier 15 a, 220 v, ac (part no. 1hyn-450040p1 ) make: abb/ hitachi or eq make as approved by engineer in chargefor 245kv, abb make isolator, mcb (2 pole,3a, 220v, dc ), over current earth fault relay, mc61a-nx, cat no : mc61anx2200, make: l&t electrical & automation, or eq make as approved by engineer in charge for 33kv sf6 braeker., 33kv busbar support insulator (epoxy) . make: universal engg. corporation,star electrical engg. works or eq make as approved by engineer in charge.(as per sample), epoxy bushing/ fixed contact of "r","y" &"b" phase bottom side for 33kv cgl make panel (as per sample), epoxy bushing/ fixed contact "r","y" &"b" phase top side for 33kv cgl make panel (as per sample), ratech wheel of 33kv sf6 breaker, cgl make, flexible contact of 33kv sf6 breaker finger, cgl make (as per sample), silica gel blue crystal in mesh size of 15 mm to 35 mm duly packed in poly lined moisture proof m s drums/carton, heat shrinkable cable terminal kit for 3- 400mm ,33 kv xlpe cable for outdoor application (make 3m/raychem/ densons)., heat shrinkable cable terminal kit for 3- 400mm ,33 kv xlpe cable for indoor application (make 3m/raychem/ densons)., heat shrinkable cable terminal kit for 3- 185 mm 33 kv xlpe cable for indoor application (make 3m/raychem/ densons)., heat shrinkable cable terminal kit for 3- , 185 mm 33 kv xlpe cable for outdoor application (make 3m/raychem/ densons)., p g clamp deer/panther for 220 kv conductor, p g tclamp deer/ zebra, for 220 kv conductor, p g clamp deer/ trantulla for 220 kv conductor, p g clamp tarantula/ trantulla for 220 kv conductor, p g clamp deer/deer for 220 kv conductor, p g clamp made of aluminum-alloy suitable for zebra to trantulla conductor with 4 nos bolt - n

Central Government/Public Sector

CTN :45278015

05 Jun, 2026 NA

Kolkata - West Bengal

Tender For procurement of hospital consumables items - adhesive tape (width 5 cm x length 5 m), disposable syringe, sterile hypodermic, non toxic, non pyrogenic, single use (2 ml), disposable syringe, sterile hypodermic, non toxic, non pyrogenic, single use (5 ml), disposable syringe, sterile hypodermic, non toxic, non pyrogenic, single use. central luer slip, ribbon pack (10 ml), surgical rubber gloves, pre-powdered, for single use, anatomically shaped for comfort, textured surface for excellent instrument grip (6.5 ’’), surgical rubber gloves, pre-powdered, for single use, anatomically shaped for comfort, textured surface for excellent instrument grip (7’’), surgical rubber gloves, pre-powdered, for single use, anatomically shaped for comfort, textured surface for excellent instrument grip (7.5’’), infusion set, eto sterile, non-pyrogenic, non toxic, single use, 1 ml ± 20 drops (per ml d.w)needle size 21/g gravity feed only (standard), blood administration set, sterile, non toxic, non-pyrogenic , gravity feed, dehp free, single use only, 20 drops of distilled water equivalent to 1 ml ± 0.1 ml (1g ± 0.1 g) (standard), pulse oximeter (handy), display – oled/ lcd, battery- 3v : 2aaa, spo2 measuring range – 35% to 100%, accuracy - ± 2bpm or ± 2% (standard), nasal oxygen catheter , 2 m long multichannel kink resistant tube with extra soft medical grade nasal tips, sterile, non-toxic, single use (standard), accu-sure blood glucose test strips , no-coding system, accu-sure blood lancet, sterile, round (100 units pack), urine collection bag with top outlet & non-return valve, disposable, non-toxic, non-pyrogenic, single use, capacity – 2000 ml (adult), oxygen mask, sterile ,soft, flexible, medical grade, star lumen, for single use (adult), nebulizer mask, with aerosol mask (elastic strap) 2 meter long multi channel tubing, sterile single use (adult), latex examination gloves, powdered, non-sterile, ambidextrous, single use (large size), disposable surgical 3 ply face mask, anti allergic, fluid resistance, optimal comfort high particle filtration (adult), disposable surgical cap, sterile, medical grade, spandex and polyester elastic, (adult), i.v cannula with injection port & wings, 20g, 1.1 x 32mm, 61ml/min (standard), i.v cannula with injection port & wings, 18g, 1.1 x 32mm, 61ml/min (standard), cannula fixator, extra strip for additional adhesion (standard), round spot band-aid , material – cloth, adhesive (l x w x h = 50 x 80 x 45 millimeters), urine collection container, sterile (60 ml), enema kit for adults, reusable & washable, polyvinyl chloride make (1500 ml), clot activator blood collection tube, vacuum, medical grade pet, transparent, 4.0 ml, clot activator coated on the inner wall to accelerate clotting, pre-sterilized & disposable (13 x 75 mm), k3 edta blood collection tubes, vacuum, medical grade pet, 2ml, transparent, pre-sterilized & disposable (13 x 75 mm), sodium fluoride blood collection tube, vacuum, medical grade pet, transparent, 2.0ml (13 x 75 mm), prothrombin time collection tube, vacuum, medical grade pet, transparent, 2.7ml tubes, pre-sterilized & disposable (13 x 75 mm), biomedical waste carrying bag colour – blue/yellow/red/black non chlorinated bis -9738 certified polymer made, biomedical waste bag thickness minimum 120 micron and manufacturer details should be printed on the bag. the bag should be leak proof and the bmw bag must include one cable tie. all bags are to be customized with biohazard symbol, preprinted as per wbpcb norms (size – 65 cm (b) x 80 cm (l) for 50 litre), biomedical waste bin – colour – blue/yellow/red/ black, high density polyethylene (hdpe), 50 ltr capacity, weight – 3.5 kg (approx), all bins are to be customized with biohazard symbol (dimension (l*w*h) 415 x 425 x 615 mm (approx.), electric needle cutters , weight-0.3kg to 2 kg, power consumption- 60w-100w, burning temperature-16000c, abs plastic body with stainless still, removal drawer for waste collection (dim

Central Government / Public Sector

CTN :45211080

09 Jun, 2026 NA

Vijayawada - Andhra Pradesh

Tender For supply of oh kit for constant contact polymer side bearer assembly to drg. no. aal -021101, alt-9 consisting of following items conforming to rdso spec. no. wd-38 misc-2004, rev-3 of april-2025 (with marking details) sl. no. 1 description : round plate (steel) with stopper spring, item no. - 3 & 6, qty. - 02 nos. sl. no. 2 description : pu lining (top& bottom), item no. - 4, qty. - 01 set. sl. no. 3 description : poly rings - 3, item no. - 5, qty. - 03 nos. to aal drg no : aal-021101, items 3,4,5 & 6, alt : 9. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45130185

01 Jun, 2026 5.00 Lacs

Surat - Gujarat

Tender For corrigendum : tender for the fixing of polymer kit and pipe typeearthing at variouslocation for existing dgvclnetwork at jurisdiction of kadodara-1 sub divisionunder kadodara division.

State Government

CTN :45260529

04 Jun, 2026 1.90 Crore

Thiruvananthapuram - Kerala

Tender For supply of autosomal str dna amplification kit , y str dna amplification kit , quantifiler trio dna quantification kit , 3500 capillary array , performance optimised polymer pop4 , conditioning reagent , cathode buffer - 3500 series , anode buffer - 3500 series , hidi formamide , dna mini kit- qiagen , blood mini kit-qiagen , case work extraction kit , tissue and hair extraction kit , bone extraction kit , maxwell fsc dna iq case work kit , hi media proteinase k- solution , diluent for dna extraction , phenol chloroform isoamyl alcohol , stain extraction buffer , phosphate buffered saline, 7.4, 1x , sodium hypo chlorite solution , hydrogen peroxide , glacial acetic acid , atl buffer , cleansol , microcentrifuge tubes 2.0 ml , microcentrifuge tubes 1.5 ml , 0.2 ml flat cap clear tubes pcr tubes , microcentrifuge tubes 0.6 ml , microamp optical 96 well reaction plate , 1 to 200ul aerosol barrier gentip , 0.5-10ul aerosol barrier gentip , universal yellow tips- 200ul , 2-20ul aerosol barrier gentip , 100-1000 ul filter tip , fta card , dna extraction qiamp column , nuclease free water , qiamp collection tube , optical adhesive sealing film , tissue paper- lint free , porcelain china dish , surgical blade , surgical mask , nitrile gloves , centrifuge tube 15 ml , centrifuge tube 50 ml , plastic tray , poly propylene measuring jug , mini spin , cyclomixer , four-way sample rack , pcr rack with lid 96 well , pcr rack without lid , 1.5 or 2 ml tube rack with lid , filter paper 46 x 57 cm cat no. 1001917 , pipette stand , autoclavable 500 ml reagent glass bottle , microtube rack 80 wells - without lid , reagent bottle , ez1 and ez2 dna investigator kit , microslide box , microslide tray , harris punch with mat ) /bid number : gem/2026/b/7553056 * /dated: 20-05-2026 & & / bid document 1 / 44

State Government

CTN :45282107

10 Jun, 2026 63.00 Lacs

Patti - Punjab

Tender For supply of supply of 11 kv v type cross arm clamp , supply of 3 phase dis. box clamp with nut and bolts , supply of connecting cable , supply of l.t. fuse set protection box , supply of tinned copper fuse wire different size , supply of hdpe pipe , supply of stone pad , supply of holding clamp , supply of ms angle , supply of t-off chhanel , supply of top chhanel 125x65x240 , supply of dropper channel 100x50x2028 mm. , supply of danger board with clamp and nut and bolt , supply of g.i. patti clamp nut and bolts , supply of l.t. tail less unit , supply of copper l-pieace , supply of 11 kv f clamp , supply of suspension clamp , supply of dead end clamp , supply of eye i hook , supply of eye bolts for guarding , supply of j hook , supply of lt clamp , supply of pearcing connector , supply of alluminium lug 120 sq.mm. , supply of alluminium lug 240 sq.mm. , supply of alluminium lug 70 sq.mm. , supply of nut bolts and washers off size , supply of guarding angel , supply of guarding angel clamp , supply of m.s. angel iron 65x65x6 mm. , carriage of 9 m stp pole-sp- 55 galvanised , carriage of 11 m stp pole-sp- 55 galvanised , carriage of 8.5 m pcc pole , carriage of v type cross arm for 11 kv , carriage of 11 kv pin insulator with pin , carriage of disc insulator with fitting t and c 45 kn , carriage of 11 kv fuse set , carriage of 11 kv tpmo with polymer insulator , carriage of complete stay , carriage of distribution transformer 25 kva , carriage of distribution transformer 63 kva , carriage of distribution transformer 100 kva , carriage of distribution transformer 250 kva , carriage of acsr dog conductor , carriage of acsr weasel conductor , carriage of m s earthing rod 20 x2540 mm , carriage of lt al. xlpe cable size 1x240 sq.mm. , carriage of lt pvc cable 1x120 sq.mm. for dtr , carriage of lt pvc armoured cable size 3.5x70 or 35 sq.mm. , carriage of 11 ) /bid number : gem/2026/b/7551524 * /dated: 20-05-2026 & & / bid document 1 / 54 kv xlpe cable 3x185 sq.mm. , carriage of lt ab cable 3x120 sq.mm. , carriage of lt ab cable 3x50 sq.mm. , carriage of lt ab cable 3x95 sq.mm. , carriage of lt pvc armoured cable size 4x25 sq.mm. , carriage of 33 kv xlpe cable 3x300 sq.mm. , carriage of 33 kv indoor or outdoor jointing kit , carriage of 11 kv indoor or outdoor jointing kit , carriage of 33 kv straight through , carriage of 11 kv straight through size 3x185 sq.mm. , carriage of 11 kv vcb , carriage of g.i. wire 6 or 8 swg for guarding , carriage of three phase distribution box , erection of l.t. fuse set protection box , execution of chemical earthing with g.i. patti clamp nut and bolts , execution of pipe earthing with g.i. patti clamp nut and bolts , erection of l.t. tail less unit with all respective material , laying of acsr dog conductor , laying of acsr weasel conductor , laying of lt ab cable 3x120 sq.mm. , laying of lt ab cable 3x50 sq.mm. , laying of lt ab cable 3x95 sq.mm. , mounting of 3 phase distribution box , erection of double pole structure , erection of single pole structure , grouting of pcc or stp pole , grouting of stay , earthing of pole , guarding of 11 kv line , fencing of distribution transformers , plinth work , installation of transformers 11 or 0.4 kv t or f 25 kva , installation of transformers 11 or 0.4 kv t or f 63 kva , installation of transformers 11 or 0.4 kv t or f 100 kva , installation of transformers 11 or 0.4 kv t or f 250 kva , laying of cable 11 kv xlpe cable 3x185 sq.mm. , laying of cable 33 kv xlpe cable 3x300 sq.mm. , installation of 33 kv indoor or outdoor jointing kit , installation of 11 kv indoor or outdoor jointing kit , installation of 33 kv straight through , installation of 11 kv straight through , installation of 11 kv vcb , dismentlling of jarjar g.i. wire and weasel conducter , received back of distribution transformer

CTN :45088015

23 May, 2026 NA

Darjeeling - West Bengal

Tender For bid to ras supply of solar energizer fencing - solar fence energizer 12v dc max 1200 , regular conventional battery xp tubular , 2 way tension spring , 2 way pp insulators , bobbin insulators , 40mm gi pipe 2.5 mtr with clamps , 40mm ptmt pipe with 2 mtr spring base , high tension iron wire 4mm , solar fast charging panel kit 180 200w , wire strainer , gi pipe 250 mtr height , polymer thermoplastic handle , gi binding wire 1mm , earthing set dc operated , 1.5 copper wire 20 sqmm , controller bore , warning sign board , coil pipe concealed , cement for base , aggregate 40mm and 50 mm , sand , labour and installation charges

Scanning Probe Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government And Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government / Public Sector

State Government

State Government