Latest sci pipe Tenders | Government sci pipe Tenders

Central Government/Public Sector

CTN :45343159

04 Jun, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - 98090616]scrap cond./released/unserviceable hand ms tools of sorts and sizes broken and worn-out such as augers, hammers, spanners, braces, ratchets, round saw, screw wrenches, screw drivers, t handle, socket, saw level, slitting saw cutter, sizzle, oil pumps, rail gauges, saw, bit, clamp for rail drill, drill bit, torque wrench, measuring tape, weight, scissor, pipe die set, glass cutter, de ring spanner, file, double face sledge hammer, hand pipe screw wrench, adjustable wrench, cutting plier, stamp pad, hacksaw blade, nose plier, clamp carpenter, beat, manual tree cutter, and other items coming under ms tools scrap on as is where is condition is available under the custody of cdms 08ward ap (loc:bin no 0005 at 08 ward inside)

State Government

CTN :45287536

05 Jun, 2026 20.51 Lacs

Kheda - Gujarat

Tender For constructing of box v.r.b. @ ch.6950 mt. in place of existing pipe v.r.b. on akhdol mitral pij lateral drain near village mitral.

State Government

CTN :45287537

05 Jun, 2026 21.33 Lacs

Kheda - Gujarat

Tender For constructing r.c.c. box type barrel in place of existing damaged pipe v.r.b. @ ch.1020 meter on tundel pij lateral drain.

CTN :45292176

01 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of rectifier assy , elec speedo meter , fuel water seprator , release bearing , minus plate , pipe assembly , motor fuel pump , booster diaphram , lateral articulation stop , hose mm

CTN :45292266

01 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of seven pin plug lot , lateral articulation stop , pipe l od x g seamless , pipe l x od x g seamless , pin socket , gear ring fly eheel , voltage regulator , air pressure gauge grav

CTN :45318277

09 Jun, 2026 50.00 Lacs

Godhra - Gujarat

Tender For supply of cooling pad 2 feet x 4 feet with fitting , cooling pad frame alluminium 2 feet x 4 feet , water circulation pipe for pad frame , repairing fogger system with fogger and material , green net , insect net , gi profile with installation , zigzag spring with installation 8 mm , fogger with lpd with installation , uv stabilized film , uv stabillized film greennet insect net installation labour , exhaust fan with installation , 15 w solar street ligh system set with installation , 15 w solar street light repering work , motor repairing 1.5hp , 2 hp three phase exhaust fan motor repairing , 2 hp three phase exhaust fan new motor with installation , gi pipe 1.5inch 2 mm thikness with fitting , gi pipe 2inch 2 mm thikness with fitting , repairing of panelboard , 2 core 4 sq cable with fitting , 3 core 4 sq cable with fitting , 4 core 4 sq cable with fitting , fiber or pvc gutter with fitting , temperature controller with fitting , humidity display with fitting , fogging auto controller with fitting , bedsheet 100 micron , fabrication work , electric work , plumbing work upvc pipe and fitting 50 mm , plumbing work pvc pipe and fitting 63 , micro irrigation facility for plantation , micro irrigation facility for hitech nursery , 16 mm lateral with installation , 16 mm inline with installation , 8 lph dripper with fitting , inverted modular sprinkler or fogger sytemt for nursery , installation of foundation pipe pole digging and civil material without pole , hp solar controllar , hp solar motor pump , 545 watt solar panel with fitting , 50 mm10 kg isi hdpe pipe , remove damage uvsheet greennet insecti net profile

CTN :45243141

09 Jun, 2026 12.78 Lacs

Murshidabad - West Bengal

Tender For procurement of different spares related to bottom ash clinker crusher and bottom ash system for overhauling of unit 2 scheduled in july august 2026.sgtpp - procurement of different spares related to bottom ash clinker crusher and bottom ash system for overhauling of unit 2 scheduled in july august 2026.sgtpp, cam segment for clinker crusher for bottom ash crusher dcips drawing no-25p06-t-1b-582,material-durite,bhn:500, shaft with shaft struct & shaft sleeve for bottom ash crusher dcips moc-en24 & ss 410,drawing no 25p06-t-1b-582, wear plate front for clinker crusher for bottom ash crusher dcips drawing no-25p06-t-1b-582,material-durite,bhn:500, wear plate back for clinker crusher for bottom ash crusher dcips drawing no-25p06-t-1b-582,material-durite,bhn:500, wear plate side for clinker crusher for bottom ash crusher dcips drawing no-25p06-t-1b-582,material-durite,bhn:500, gland for packing for bottom ash crusher dcips moc-ci fg-260 is:210,drawing no 25p06-t-1b-582, packing gland follower for bottom ash crusher dcips moc-bronze ltb 2,is:318,drawing no 25p06-t-1b-582, packing gland flange for bottom ash crusher dcips moc-ms,is:2062 gr-a,drawing no 25p06-t-1b-582, lantern ring for bottom ash crusher dcips moc:brass ltb-2,is318,as per dcips drawing no 25p06-1b-t-722, labyrinth ring of bearing housing moc-ms is 2062,for ahp-ifor clinker grinder,make-dcips, cam bolt for exen crusher for bottom ash crusher size: m20 x 65 long,sq.head,thread length 34 mm with nut,lock nut & spring washer.m.o.c: en8, chain simplex for bottom ash crusher dcips drawing no 25p06-t-1b-582, sprocket drive and driven for bottom ash crusher dcips drg.no.28p03-1b-t-582(rev-2), feed sump for bottom ash clinker crusher for bottom ash crusher dcips as per dcips drawing no 25p06-1b-t-722, nozzle tip with ceramic insert # 2,13 dcips for jet propulsion pump,part no-2&13,as per dcips drawing n0.-25p06-1b-t-591# for jet propulsion pump,as per dcips drawing n0.-2 5p06-1b-t-591 sgtpp1, nozzle inlet for jet pump for jet pump sgtpp dcips moc: fg,is 210,as per dcips dwg no 25p06-t-1b-591, throat cum disch pipe of jet pump for jet pump sgtpp dcips moc: durite(bhn 500-550),as per dcips dwg no 25p06-t-1b-591, punched washer type a for jet pump,moc:ss410/416,as per dcips punched washer (type dcips punched washer (type a) for m 20 bolts is 2016 of of jet pulsion pump,as per drawing,part no-05,material: steel, guide angle lh for ba feed gate for ba feed gate dcips moc-ms is:2062 gr a,drawing no 25p06-1b-t-572, guide angle rh for ba feed gate for ba feed gate dcips moc-ms is:2062 gr a,drawing no 25p06-1b-t-572, gate roler fitted with bush for ba feed gate dcips drawing no-25p06-t-1b-572,material-steel-is:1030, renewable seat lip for ba feed gate for ba feed gate dcips moc-ms is:2062 with ss316 lip,drawing no 25p06-1b-t-572, adjustable seating wedge # for bottom ash feed gate assembly as per drawing no.28p03-1b-t-576(rev-2), enclosure cover plate # dcips for bottom ash hopper feed gate enclosure, moc:ms,is:2062,10mm thk,as per dcips drawing no 25p06-t-1b-572, gasket,for ba feed gate access door for bottom ash moc: neoprene rubber , dcips drg no: 25p06-1b-t-572, gasket for feed gate enclosure for ba feed ga moc: neoprene rubber, elbow,200nb x45 for wet ash system sgtpp dcips moc: durite (alloy c.i),bhn:450-500,as per dcips dwg no 25p06-1b-t-831, elbow,200nb x90 for wet ash system sgtpp moc: durite (alloy c.i) bhn:450-500.as per dcips dwg no 25p06-1b-t-835, lateral,200nbx45 p/p/p for wet ash system sgtpp ba slurry line.moc: durite(alloy c.i) bhn: 450-500, guide angle bracket for ba feed gate for ba feed gate dcips moc-ci fg-220 is:210,drawing no 25p06-1b-t-572

CTN :45250249

27 May, 2026 1.87 Crore

Delhi - Delhi

Tender For aesthetic improvement of external surface of residential quarters type ii special 16 nos blocks and 32 nos mix blocks under service centre 324 at sector -12 r k puram new delhi 2025-26 (sh repair of chajjas external plaster replacement of sci pipes and external finishing/painting work (balance work)

State Government

CTN :45245312

05 Jun, 2026 NA

Sagar - Madhya Pradesh

Tender For name of work: e-tender for the procurement of materials for use in nurseries under the units of the sagar social forestry circle - 1” braided water hose pipe (length: 30 meters) , monoblock motor: 1 hp, 2-phase , monoblock motor: 2 hp, 2-phase , monoblock motor: 3 hp, 3-phase , monoblock motor: 5 hp, 3-phase , monoblock motor: 7.5 hp, 3-phase , submersible motor: 1 hp, 2-phase , submersible motor: 2 hp, 2-phase , submersible motor: 3 hp, 3-phase , submersible motor: 5 hp, 3-phase , submersible motor: 7.5 hp, 3-phase , submersible motor: 10 hp, 3-phase , submersible pump: 2 hp, 2-phase , submersible pump: 3 hp, 3-phase , submersible pump: 5 hp, 3-phase , submersible pump: 7.5 hp, 3-phase , submersible pump: 10 hp, 3-phase , c-clamp type hdpe pipe (length: 20 feet), diameter: 1.5” , c-clamp type hdpe pipe (length: 20 feet), diameter: 2” , c-clamp type hdpe pipe (length 20 ft), dia 2.5" , c-clamp type hdpe pipe (length 20 ft), dia 3" , t-bend 2.5" , l-bend 2.5" , t-bend 3" , l-bend 3" , end cap 2.5" , washer 2.5" , washer 3" , diesel engine pump 5 hp , diesel engine pump 7.5 hp , hdpe rolled pipe, dia 1.5" , hdpe rolled pipe, dia 2" , hdpe rolled pipe, dia 2.5" , hdpe rolled pipe, dia 3" , plastic nozzle for sprinkler 3/4" , brass nozzle for sprinkler 3/4" , g.i. riser pipe for sprinkler 3/4" , g.i. socket for sprinkler 3/4" , g.i. foot button for sprinkler , g.i. socket 3/4" , covering/cladding material: structure covered with uv-stabilized hdpe / polycarbonate multilayer sheet , screen filter for fogger system , booster pump , temperature meter , 16 mm lateral line , 4-way fogger , exhaust fan (30" dia) , honeycomb pad for cooling system , g.i. round pipe 1" , g.i. round pipe 1.5" , g.i. round pipe 2" , g.i. round pipe 2.5" , iron sieve (for sand) 3x6 ft (with wooden frame) , dhanzyme fertilizer , d.a.p. , n.p.k. , chlorpyrifos 20% ec , fungicide (bavistin powder) , petrol-operated spray pump (20 liters) skid steer loader , gi pan (tagari) – 15-inch , plastic pan (tagari) – 20-inch , shovel (with ms handle) , hand trowel (khurpi) , watering can , pickaxe , crowbar – 25 mm x 5 ft , double-wheel barrow trolley (ms) – size: 600 x 480 x 600 mm , nylon rope – 12 mm dia. (for borewells) , nylon rope – 10 mm dia. (for borewells) , gi pipe – 2.0 inch (for borewell use) , earthworms (species: *eisenia fetida*) , pvc casing pipe – 6-inch , pvc casing pipe – 8-inch , ro water filter (with cooler; capacity: 40 liters) , gi profile strip – length: 4 meters , gi (galvanized iron) zigzag spring , 2-way fogger , polysheet 200 micron, 800 gauge , 40 mm perforated rainpipe (length 100 m) , 40 mm jointer pipe (pvc) , mta 32 mm x 40 mm (pvc) , end cap 40 mm (pvc) , mta cock 32 mm x 40 mm , 45 mm perforated rainpipe (length 100 m) , 2.5" adapter, c-clamp type (hdpe) , 2.5" sprinkler pipe head (hdpe) , 2.5" sprinkler pipe tail (hdpe) , black polythene bag (size 15x25, 250 gauge) , white polythene bag (size 15x25, 400 gauge) , black polythene bag (size 15x25, 400 gauge) , white polythene bag (size 20x30, 400 gauge) , black polythene bag (size 20x30, 400 gauge) , black ldpe sheet , vermicompost bag, 100g, printed (size 22x36 inches; capacity 50 kg) , neem bag, 100g, printed (size 22x36 inches; capacity 50 kg) , green net (shade net) — 50% shade , green net (shade net) — 75% shade , green net (shade net) — 95% shade , chain-link fencing — 1.5 m , chain-link fencing — 2 m , chain-link fencing — 2.5 m , barbed wire , angle iron 50x50x5 mm — 2 m , angle iron 50x50x5 mm — 2.5 m angle iron 50x50x5 mm, 3 mtr , iron rebar (reinforcement bar) 6 mm , iron rebar 8 mm , iron rebar 10 mm , iron rebar 12 mm , m.s. pipe 1"x1" , m.s. pipe 1.5"x1.5" , m.s. pipe 2"x2" , m.s. pipe 2.5"x2.5" , m.s. pipe 3"x3" , cement (bag weight: 50 kg) , sand (for construction) , crushed stone aggregate (40 mm) , crushed stone aggregate (20 mm) , crushed stone aggregate (6 mm) , bricks (kiln-fired) , g.i. profile sheet , vitrified tiles (4"x2") (glossy double charge) thickness 9-10 mm,

CTN :45261968

29 May, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap melting in which includes ms hanger, buffer patch, lever, silent block with negligible rubber attachment, broken ms roller bering without brass case, broken ms ball bering, bering cage, m paid, yoke lever, tensioning device, tension rod, spare parts of cbc, light weight/small spring, ms coller, wearing plate, nut- bolt, revits, retaining cap, buffer spendle, handle, small size of ms plates/sheets and strip, hose pipe clip, ms window frame lever/strip, dog spike, round spike, vertical/lateral shock absorber, different type of bmbc parts such as cylinder body, piston, piston packing, plunger, plunger spring, chain, circlip, piston trunk, tee bolt, ratchet, adjusting tube, released spring, spring washer, iron washer, knuckle, small cutpics of pipe, ms bush, hand brake trunnion, split pin, cotter, spare part of rail fittings, jubilee clip, dust excluder, latch, shim for plunger, special washer, ms ring, slotted nut, hex head bolt, empty casing of air brake cylinder, flange, bmbc cover, inculiding some new but absolute items available with or without negligible nf, wires, lugs etc attachments, in various sizes and other similar/unknown ferrous item which comes under melting scrap location; - south side of oil godown. beside road lbpl, dbaw, gst-18%, tcs -1% , hsn code-72045000, allocation-20714208

Sci Pipe Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

State Government