Latest scraper plate Tenders | Government scraper plate Tenders

CTN :45314254

01 Jun, 2026 NA

Jind - Haryana

Tender For supply of casting items (trash plate, scrapers and sprockets) - cast steel trash plate as per drg. no. mill 91bmaterial grade is-2708, grade-iii bnote: -i) trash plate should be in single piece pattern with uniform casting.ii) trash plate should be properly machined from its sides.iii) trash plate should not be painted while on supplying.iv) blow holes should not be there on the surface of trash plate.v) the supplier will submit test certificate of the supplied material.vi) the material of trash plate may be got checked if required by the mills from any reputed laboratory like m/s shri ram institute, delhi.vii) painted trash plate not acceptable., c.s. top scraper as per drg. no. mill -93, c.s. discharge scraper as per drg. no. mill 115, c.s. discharge scraper as per drg. no. mill 116note: - top scraper / discharge scraperi) scraper should be in single piece pattern with uniform casting.ii) scraper should be properly machined from its sides.iii) scraper should not be painted while on supplying. iv) blow holes should not be there on the surface of trash plate. v) the supplier will submit test certificate of the supplied material.vi) the material of scraper may be got checked if required by the mills from any reputed laboratory like m/s shri ram institute, delhivii) material is2708 grade -111b

CTN :45292503

01 Jun, 2026 NA

Sultanpur - Uttar Pradesh

Tender For providing of facility management services - lumpsum based - industrial; cs trash plate on conversion base as per drawing ci scrapper discharge on conversion basis and ci scrapper top on conversion basis all as per drawing; consumables to be provided by service p..

CTN :45258334

28 May, 2026 NA

Multi City - Gujarat

Tender For purchase of new c.s trash plate/ c.s scraper plate and g.m bearing liner

State Government

CTN :45228145

03 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of ci cs casted items - c.i. casted items on new basis, c i door of boiler as per drawing no ksc/blr/door/35tph approx weight 50 kg suitable for working apto 800 degree centigrate, c.i. tool post of plainer machine approx weight 18 kg each, c i bagasse chuite of boiler as per drawing no ksc/blr/chuite/35tph approx weight 160 kg suitable for working apto 800 degree centigrate (duly machined), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling different size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, c.i. casted items (on conversion basis), c i door of boiler as per drawing no ksc/blr/door/35tph approx weight 50 kg suitable for working apto 800 degree centigrate, c.i. tool post of plainer machine approx weight 18 kg each, c i bagasse chuite of boiler as per drawing no ksc/blr/chuite/35tph approx weight 160 kg suitable for working apto 800 degree centigrate (duly machined), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling difrent size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, cast steel spur gear & pinion new basis, c.s. trash beam for mill size 33"x66" as per drawing approc weight 1 mt, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c.s.sproket-36 teeth for duplex chain 2 1/2" pitch material 2708 drg no ksc/boiler-163, c.s. sprocket 17 teeth for duplex chain 2 1/2" pitch material 2708 drg no-ksc/mill/4887, opertuinity device of trash turner beam material-ss drg no. mills-8488, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-10, fw-110mm od-260mm bore-50mm, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-8, fw-120mm od-208 mm bore-50mm, c.s.worm shaft ( as per sample) for mill, c.s. mill coupling (weight 700kg approx) as per drawing, c.s. mill crown pinion 16 teeth (weight 1500 kg.) as per drawing, cast steel spur gear & pinion on conversion basis, c.s. trash beam for mill size 33"x66" as per drawing approc weight 1 mt, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sproc

CTN :45223843

01 Jun, 2026 NA

Gajraula - Uttar Pradesh

Tender For providing of custom bid for services - 1250 kg cs trash plate casting on conversion basis

CTN :45197535

29 May, 2026 NA

Bagpat - Uttar Pradesh

Tender For tender for supply of cs trash plate and scrapper -c.s. trash plate for mill size 40x80- on conversion basis. material should be is2708. as per drawing no. 1018mh0402-03 , 04 , 01 & 2-171 , machining charges for above trash plate. as per profile , grooving charges for the above trash plate. as per profile , c.s. scrapper for mill size 40 x 80 , on conversion basis , material should be is1030. as per drwing no.ui5385-300-03-2-100 , 3-102 for top roller , c.s. scrapper for mill size 40 x 80 , on conversion basis , material should be is2708. as per drwing no.ui5385-300-03-2-100 , 3-102 for top roller , c.s. scrapper for mill size 40 x 80 , on conversion basis material should be is1030 , as per drwing no. ui5385-300-3-3-103 , 3-10 for discharge roller , c.s. scrapper for mill size 40 x 80 , on conversion basis material should be is2708 , as per drwing no. ui5385-300-3-3-103 , 3-10 for discharge roller , machining charges for top and discharge rollers.as per profile , grooving charges for top and discharge roller. as per profile

corporations/Associations/Others

CTN :45139287

27 May, 2026 15.00 Lacs

Multi City - Multi State

Tender For supply of cast steel items - newcs crown pinion only casting confirm to is2708 gradeiii for mill size 33inch by66inch as per drawing , cs crown pinion only casting confirm to is2708 gradeiii for mill size 33inch by 66 inch as per drawing on conversion basis , machining charges of above casted crown pinion of mill size 33inch by 66 inch , new cs crown pinion only casting confirm to is2708 gradeiii for mill size 40inch by 80inch as per drawing , cs crown pinion only casting confirm to is2708 grade-iii for mill size 40inch by 80 inch as per drawing on conversion basis , machining charges of above casted crown pinion of mill size 40inch by 80 inch , cs trash plate only casting confirm to is1030 grade 280 upon520w for mill size 33inch by 66 inch as per drawing , cs trash plate only casting confirm to is1030 grade 280 upon 520w for mill size 33inch by 66 inch as per drawing on conversion basis. , cs trash plate only casting confirm to is2708 grade iii mill size 33inch by 66 inch as per drawing , cs trash plate only casting confirm to is2708 gradeiii mill size33inch by 66 inch as per drawing on conversion basis , machining and grooving charges of above casted trash plate of mill size33inch by 66 inch , cs trash plate only casting confirm to is1030 grade 280 upon 520w for mill size 40nch by80ch as per drawing , cs trash plate only casting confirm to is1030 grade 280 upon 520w for mill size 40nch by80inch as per drawing on conversion basis. , machining and grooving charges of above casted trash plate of mill size 40nch by80inch. , cs trash plate beam only casting confirm to is2708 gradeiii for mill size 33inch by66inchas per drawing , cs trash plate beam only casting confirm to is2708 gradeiii for mill size33inch by66inch as per drawing on conversion basis , cs trash plate beam only casting confirm to is1030 grade 280 upon 520w for mill size 33inch by66inch as per drawing , cs trash plate beamonly casting confirm to is1030 grade 280upon520w for mill size 33inch by66inch as per drawing on conversion basis , machining and grooving charges of above casted trash plate beam of mill size 33inch by66inch as per drawing , cs trash plate beam only casting confirm to is2708 grade 280 upon 520w for mill size40nch by80inch as per drawing , cs trash plate beam only casting confirm to is2708 grade 280upon520w for mill size 40nch by80inch as per drawing on conversion basis , machining and grooving charges of above casted trash plate beam of mill size 40nch by80inch as per drawing , new cs scrapper only casting confirm to is1030 grade 280 upon520w for mill size 33 inch by 66 inch as per drawing , new cs scrapper only casting confirm to is1030 grade 280upon520w for mill size 33inch by66inch as per drawing on conversion basis , machining and grooving charges of above casted scrapper of mill size 33inch by66inch , new cs scrapper only casting confirm to is1030 grade 3 for mill size 40nch by80inch as per drawing , new cs scrapper only casting confirm to steel grade e 250a is2062-2011 for mill size 40nch by80inch as per drawing , machining and grooving charges of above casted scrapper of mill size 40nch by80inch

CTN :45156769

20 May, 2026 NA

Doiwala - Uttarakhand

Tender For cs casting trash plate hubs gears pinion coupling bearing housing for mill

Co-operative

CTN :45096137

20 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For c.s. item on conversion and supply basis and forged steel item - c.s coupling having material as per is:1030 grade 280-520w for mill size 30"x60" as per drg. no. supply basis, conversion basis, machining charge, cast steel crown pinion having material is:2708 grade-iii-b for mill size 30"x 60" as per drg. kcp-mh-70 and texmaco mh-32supply basis, conversion basis, machining charge, c.s.trash plate having material as per is:1030 and grade-iii-b as per drg. kcp-mh-13-ii and texmaco mh-13-isupply basis, conversion basis, machining charge, teeth cutting/grooving of trash plate, as per drg., c.s.trash beam as per is-1030/is 2708 as per drg. kcp-mh-84-r and texmaco mh-36supply basis, conversion basis, machining charge, forge steel tail bar for taxmaco and kcp mill having material c-40/8 as per drg. mh- 6 & mh-56supply basis, conversion basis, forge steel pinion for transmission gear of taxmaco mill as per drg. no. mh 39,material en-24,tensile strength70-80 kg./sqcm, hardness 200-220 bhn, c.s.bearing housing for taxmaco mill as per drg no mh-17-b for side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-79for side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-31for top roller housingsupply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-79 for bottom roller housingsupply basis, conversion basis, c.s.gear coupling for c/f machine as per drg.no.bh-14 (duly case hardness), c.s. pinion for cane unloader as per drg, cu- 16teeth-17, teeth -18, c.s.sprocket 2" pitch (both pilot bore)(i) no of teeth 18 , boss dia 3", (ii) no of teeth 36 , boss dia 6", c.s.sprocket for boiler rotary feeder pitch- 25.0 mm,no of teeth 21, od -180mm. p.b -25 mm, as per drg. blr-73/1, c.s.sprocket/gear for bagasse elevator (pilot bore) pitch 50.8 mm,no of teeth 50, od 842.70mm. pcd 808.7mm,teeth thickness 28mm, boss- 270x130 mm, as per drg. mh-75, cs sprocket (pilot bore) as per drg.blr-62 pitch 50.8 mm, no.of teeth-14 pcd 226.49mm, od 258.8mm, for bagasse elevator drive, static coller of 25 mm thick duly hard faced of 5 mm thick layer . total thick 30 mm after hard facing for taxmaco & kcp mill as per drawing no. mm 105(i) m.s. material, (ii) c.s.material, sprocket of inter carrier od 280 mm,no.of teeth 45.pitch 19.5 mm, c.s. sprocket (duplex) for inter carrier, as per drg. mh-72, teeth 12, od-302mm, pcd- 290mm, rd-242 mm, pitch-75mm, b1 100mm, b2 75mm, s.s. wear plate is 304 quality, as per drg. mh-60(i) length 435 mm x width 370 mm x thick 15 mm, (ii) length 385 mm x width 330 mm x thick 15 mm, c.s.tresh beam bracket as per sample /drg. mh-90 (texmaco), c.s.eccentric pin trash bar adjusting device as per drg. mh-133/2024-25, c.s. trash beam adjusting connecting rod for taxmaco mill, as per drg. mh- 297, c.s. bridge wheel for cane unloader as per drg. cu25 (1),, trolly wheel for cane unloader as per sample /drg. cu-26-ii, pinion gear set for cane unloader as per sample /drg, c.s. pinion (gear) for rbc cross carrier pitch 41 mm. teeth 25 , type of teeth in valute (spur) module 12.7 mm width 125 mm .od 343 mm, bore 2" dia as per drg. mh-200716, clutch shaft for mill. as per drg. mh-76 , en-8for taxmaco mill -sl.no.2, for kcp mill - sl.no.1, cs worm for crystilizer wheel od 290 mm, bore 81 mm.pitch 80 mm complete as per drg. mh-39-r, groving of c.s. trash plate as per drg., idler wheel gear for cane unloader., no of teeth 68, od-420 mm, module-6, pitch- 18.84 mm, pcd-408 mm, as per drg. no. cu-25 (i), pinion for cane unloader no. of teeth- 33, od-210 mm, pcd-198 mm, pitch- 20 mm, module-6 as per drg. no. cu-16-r, pinion for cane unloader no. of teeth- 18, od-200 mm, pitch- 35 mm, bore- 50 mm, width-115 mm, module-6, teeth depth-25 mm as per drg. no., break stand complete for cane unloader, size-10", cs sprocket of rbc, as per drg. blr 32/93, od- 646mm, pcd-573mm, rd-497mm, nos of teeth 12, pitch-150.00mm, chain sprocket for int

CTN :45009305

02 May, 2026 NA

Palwal - Haryana

Tender For tender for purchase of trash plate, c.s scrapper , c.s collar c.s. coupling and c.s. crown pinion

Scraper Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Co-operative