Latest screw pitch gauge Tenders | Government screw pitch gauge Tenders

Central Government And Public Sector

CTN :45702517

06 Jul, 2026 NA

Multi City - Chhattisgarh

Tender For auction sale of others - total qty.= 19310.02 kgs., description: - scrap of abandoned height gauge structure i.e. estimated iron fittings(angle, ismb, ismc etc.). remarks - 1) after dismantling, all debris of condemned steel structure should be collected and removed from the site before effecting the delivery. 2) any type of hidden materials which is found during dismantling of building like rails angles, channels etc. should not be offered. the above iron materials must be handed over to concern sse/works/line/bsp store. 3) dismantling of the above structure will be done by the purchaser at his own cost and risk and without causing any loss to any railway property. purchaser will demolish and clear up to ground level only. while dismantling explosive should not be used. all the debris, unserviceable materials to be cleared from site to outside railway land by the purchaser. 4) any loss due to theft, accident etc. shall be the sole responsibility of the purchaser and no claim on this account will be entertained by the railway. 5) material to be sold on as is where is basis and should be delivered in weight.

Central Government And Public Sector

CTN :45653040

30 Jun, 2026 NA

Bangalore - Karnataka

Tender For unified screw pitch gauge to make mitutoyo model no 188-111 or exactly similar in baker/starrett/accu. note: calibration/ test certificate from nabl shall be submitted along with the supply [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45637861

02 Jul, 2026 NA

Ratlam - Madhya Pradesh

Tender For auction sale of others - released, condemned and u/s miscellaneous ms scrap consisting, {angle, rail pieces, gi pipes off size, gi sheet, iron board (angle+gi sheet) scrap of old broken water tank, channel sec, fencing, tie bar, covershed, steel bar, tmt bar, round bar, beams, flate, height gauge, flush tank, h/pump body, c.i. pipes off size, door, fencing wire}, total qty- 35.00 mt, location- sse-works-nmh office, sse-works-nmh outside office & pump room back side. mode of delivery by actual weighment basis and on as is where is basis, custodian- sse-works-nmh, fdp-50 days. note- cutting is permitted for easy loading only not into small pieces.

Central Government/Public Sector

CTN :45637761

29 Jun, 2026 NA

Kota - Rajasthan

Tender For auction sale of others - pl no- 98050035 m.s. & scrap consisting of ms angle, channel bar, gi sheet, gi pipe off size, ms door, tiebar, bolt nut, rel. offsize rail pieces, tank plate, tiebar frame, jafari, broken tree guard, hand pump body & pipe, gi fitting, ismb & ismc of height gauge and attachments if any, etc. total qty.=50.02 mt. for stock holder sse/w/ggc. ss-11 no.-sse/w/ggc/scrap/2026-27/08 date 14.05.2026. ds-8 no.-875513 dt.08.05.2026. lot should be sold on as is where is basis. purchasers are requested to see the lot/site and approchable road before bidding. no claim will be entertained after sale of lot. the stock holder is responsible for any alteration, deletion & variation in the lot or in weighment or tempering with the lot will be solely responsibility of stock holder after joint inspection, if any found subsequently. bidders must submit the fixation of the delivery date through the ireps e-auction sale module at least 7 days prior to the delivery date. all necessary safety precautions shall be strictly adhered to by the purchaser at their own risk and responsibility. the purchaser shall be solely and entirely responsible for any negligence or mishandling. delivery will be given by actual weight on government approved dharam kanta only. note-cutting may be allowed for easy loading at the time of delivery. the purchaser of the awarded lot are advised not to wait for last date of fdp considering the forthcoming mansoon season. all efforts should be made to lift the lot as early as possible.the material are lying in rajasthan state.

CTN :45484021

09 Jul, 2026 NA

Raipur - Chhattisgarh

Tender For supply of driver of 5 pieces 100 mm to 300 mm , soldering iron 125watt 230volt , temperature controlled soldering 50 watt 230 volt iron , i motor pump set 1 hp 1 phase 240 v , cabinet dryer electrical , pipe bending machine hydraulic type 12mm to 30mm , industrial sewing machine , fuel injection pump ve pump distributor fuel rotary pump dpc , phase sequence indicator 3 phase 415 v , pipe threading die with handle ratchet type die head of 12 34 and 1 , tachometer digital photo sensor type 10000 rpm , screw driver insulated 6mm 150 mm diamond head , punch centre 10 mm 150 mm , micrometer inside with extension rods accuracy 001 mm with extension rods up to 150 mm , steel measuring tape 20 mts , hacksaw frame fixed type 300 mm , dial gauge type 1 gr a complete with clamping devices and with , h washing machine semi automatic 5 kg , safety harness , auto darkening welding helmet , inverter with battery 1kva , depth micrometer 025mm accuracy 001mm , motorised bench grinder 1 hp 3 phase 440vdia150 mm , battery charger 0 6 9 12 24 48v 30amp , air ratchet with standard accessories , safety belt standard quality , drilling machinebenchtodrill up to 12mm dia along with accessories , electrical test bench , cutting knives , pocket steel tape 6 long , measuring tape 30m , measuring steel tape 15m , pliers round nose 15 cm , spoons wooden ladle , face shield , moisture box aluminium 100gm capacity , cleaning tray 45 30 cm , spanner t flocks for screwing up and upscrewing inaccessible , wheel barrow , spade , pocker , hacksaw frame fixed 150 mm , piston ring compressor , electric testing screw driver , connecting screw driver 100 mm , rotary switch 16 a440v , ph meter rod , lead light , chisels cross cut 200 mm 6mm , tweezers 100 mm , induction cooktop with following feature , glass rod , bradawl , circlip pliers expanding 15cm and 20cm , number punch 6 mm , desiccator , pipe cutting tool up to 5cm dia , chamois , electric iron automatic 750 w 240 v , belt sander narrow surface , trowelbrick 10 25cm long , pipe cutter wheel type 6 mm to 25 mm , digital vernier caliper universal type 0 150 mm lc 005 mm , heat sealing machine handpedal operated , feeler gauge 20 blades metric , screw pitch gauge metric 025 to 6 mm , beaker 50 100 250 ml 500 ml , pliers side cutting 15 cm , sleeve drill morse 0 1 1 2 2 3 3 4 4 5 , hydrometers of different ranges 030 3060 6090 brix , grease gun 05 ltr capacity , portable sanding machine 600w , water purifier ro and uv technologies , ph meter digital , hand rubber gloves tested for 5000 v , earth clamp , portable electric drill machine 15 mm drill bit capacity , measuring cylinder 100mi250ml 200 ml 500ml , pliers round nose insulated 100 mm , hammer extractor type250 grams , pipe flaring tool , thermostat , particle masks , soldering iron changeable bits 15w , spanner adjustable drop forged ss 150 mm , professional air blower power consumption 820 w , plier side cutting 200mm , washing machine automatic , microwave oven , pliers flat nose insulated 200 mm , utility knife , e ac ceiling fan and ac table fan 68 watt 230 v each , electric mixer , lugs for cable , pully puller with 3 legs 300mm , rheostat sliding type 0 25 ohm 2 amp , temperature gauge range 0 to 150 c , rheostat sliding type 0 1 ohm 10amp , conical flask 50 100 250ml 500ml , shredder for slicing of fruit and vegetable capacity 5kghrs , torque wrenches 535 nm , chisel cold round nose 9 mm 100 mm , weighing balance digital , electric soldering iron 35 w , rheostat sliding type 0 10 ohm 5 amp , impact wrench 1 to 2 inch drive , plier flat nose 150 mm , digital vernier caliper 0 150mm least count 002 , measuring tape (v3) (q3) //bid details 2 / 81

Central Government And Public Sector

CTN :45252556

19 Jun, 2026 NA

Kudankulam - Tamil Nadu

Tender For corrigendum : supply of interchangeable anvil - lc 0.01 mm - as per annexure c - range 700-800 mm , supply and delivery of analog outside micrometer with interchangeable anvil - lc 0.01 mm - as per annexure c - range 800-900 mm , supply and delivery of analog outside micrometer with interchangeable anvil - lc 0.01 mm - as per annexure c - range 900-1000 mm , supply and delivery of analog groove micrometer - with inside and outside measurement - as per annexure d - range 0-25 mm , supply and delivery of analog groove micrometer - with inside and outside measurement - as per annexure d - range 25-50 mm , supply and delivery of telescopic gauge set with 6 number of gauges - as per annexure e - range 8-150 mm , supply and delivery of micrometer stand - as per annexure f - adjustable - range upto 100 mm , supply and delivery of micrometer stand - as per annexure f - fixed - range upto 50 mm , supply and delivery of - analog long jaw caliper with fine adjustment as per annexure g - range 0-300 mm , supply and delivery of - analog long jaw caliper with fine adjustment as per annexure g - range 0-500 mm , supply and delivery of - analog long jaw caliper with fine adjustment as per annexure g - range 0-750 mm , supply and delivery of - analog long jaw caliper with fine adjustment as per annexure g - range 0-1000 mm , supply and delivery of - analog offset type caliper as per annexure h - range 0-200 mm , supply and delivery of - digital back jaw edge to centre type caliper as per annexure i - range 10.1 to 200 mm , supply and delivery of - digital back jaw edge to centre type caliper as per annexure i - range 10.1 to 300 mm , supply and delivery of - digital back jaw centre to centre type caliper as per annexure j - range 10.1 to 200 mm , supply and delivery of - digital back jaw centre to centre type caliper as per annexure j - range 10.1 to 300 mm , supply and delivery of analog pointed type caliper as per annexure k - range 0-150 mm , supply and delivery of analog knife type caliper as per annexure k - range 0-300 mm , supply and delivery of analog knide edge type caliper as per annexure k - range 10-200 mm , supply and delivery of analog swivel type caliper as per annexure k - range 0-200 mm , supply and delivery of magnetic dial stand suitable for holding stem sizes 6 mm and 8 mm as per annexure l , supply and delivery of magnetic dial stand suitable for holding stem sizes 4 mm, 8 mm and 3 per 8 inch as per annexure l , supply and delivery of magnetic dial stand with fine adjustment suitable for holding stem sizes 6 mm and 8 mm as per annexure l , supply and delivery of magnetic dial stand with fine adjustment suitable for holding stem sizes 4 mm, 8 mm and 3 per 8 inch as per annexure l , supply and delivery of magnetic dial stand - mini - as per annexure l , supply and delivery of magnet dial stand - universal - as per annexure l , supply and delivery of precision level as per annexure m , supply and delivery of precision level- box type as per annexure m , supply and delivery of radius gauges - 26 leaves 90 degree arc - 0.5-13 mm - as per annexure n , supply and delivery of radius gauges - 34 leaves 180 degree arc - 1-7 mm - as per annexure n , supply and delivery of radius gauges - 32 leaves 180 degree arc- 7.5 -15 mm - as per annexure n , supply and delivery of radius gauges - 30 leaves 180 degree arc-15.5 - 25 mm - as per annexure n , supply and delivery of metric screw pitch gauges - 21 leaves - 0.4 -7 mm - as per annexure o , supply and delivery of unified screw pitch gages - 30 leaves - 4-42 tpi - as per annexure o , supply and delivery of whitworth screw pitch gages - 28 leaves - 4- 60 tpi - as per annexure o , supply and delivery of digital vernier depth gauge - hook end - 10.1-210 mm - as per annexure p , supply and delivery of digital vernier depth //bid details 2 / 83 annexure p , supply and delivery of digital vernier depth gauge - mini - 0- 25 mm - as per annexure p , supply and delivery of dial depth gauge - 0-200

CTN :45441089

18 Jun, 2026 NA

Bazpur - Uttarakhand

Tender For supply of tools and tackels in sugar mill - roller grooving tool size- x 6 x 40 isi/iso standard, size- x 6 x 45 isi/iso standard, size- x 6 x 50 isi/iso standard, size- 1 x 12 x 40 isi/iso standard, size- 1 x 12 x 45 isi/iso standard, size- 1 x 12 x 50 isi/iso standard, size- 1, x 12 x 40 isi/iso standard, size- 1, x 12 x 45 isi/iso standard, size- 1, x 12 x 50 isi/iso standard, carbide cutting tools. size: x 4 right hand. isi/iso standard, size: x 4 left hand. isi/iso standard, size- 1 x 6 right hand. isi/iso standard, size- 1 x 6 left hand. isi/iso standard, size- x 6 right hand isi/iso standard, size- x 6 left hand isi/iso standard, carbide tips all size isi/iso standard, h.s.s. tool bit all size isi/iso standard, tapper shank dril all size . isi/iso standard, straight shank dril all size. isi/iso standard, files all size. isi/iso standard, tape set of (3 piece) bsw all size. isi/iso standard, tap set of (3 piece) mm. all size. isi/iso standard, die nut inch/mm all size. isi/iso standard, d. spanner set all size. isi/iso standard, ring spanner set all size. isi/iso standard, box spanner set all size. isi/iso standard, pipe rinch all size. isi/iso standard, measuring tape 3 meter long . isi/iso standard, do - 5 meter long. isi/iso standard, do - 15 meter long. isi/iso standard, tin cutter 10 . isi/iso standard, do - 16 isi/iso standard, revolving centre 3 m.t. isi/iso standard, revolving centre 4 m.t. isi/iso standard, revolving centre 5 m.t. isi/iso standard, oil can capacity 200 m.l. isi/iso standard, screw pitch gauge. isi/iso standard, wooden saw(circular saw)1/8 x 18 isi/iso standard, drill socket (i) size 0 1 isi/iso standard, (ii) size- 1 2 isi/iso standard, (iii) size- 2 3 isi/iso standard, (iv) size- 3 4 isi/iso standard, (v) size- 4 5 isi/iso standard, h.s.s. black tool bar square high grade all size, steel rule 12 . isi/iso standard, steel rule 24 . isi/iso standard, screw driver set all types and sizes. isi/iso standard, pliar all type and sizes. isi/iso standard, drill chuck straight size: 1/8 to isi/iso standard, carbide tips only (all size) isi/iso standard, high carbon steel tool 10% cobalt size: to 1 isi/iso standard, knurling tool multi purpose. isi/iso standard, carbide tip tool (with handle) k-20 for (roller grooving) (i) size- 1, x 12 x 40 isi/iso standard, (ii) size- 1, x 12 x 45 isi/iso standard, (iii) size- 1, x 12 x 50 isi/iso standard

CTN :45404385

17 Jun, 2026 NA

Howrah - West Bengal

Tender For supply of set of gauges for checking screw coupling of transition cbc. the above item consists of 06 various types of gauges as follows: 1) condemning gauge for short shackle screw coupling size: go-29.50 mm & no go-25.0 mm. asper rdso drg. no. 4685 & rdso-mp-mi-no-25. rev.0, jan 2006. material specification: tool steel to is no. 3748/90. hardness 50/55 hrc. qty = 1 no/set. 2) condemning gauge for long shackle screw coupling size: go-45.0 mm & no go-39.50 mm. as per rdso drg. no. 4685 & rdso-mp-mi-no-25. rev.0, jan 2006. material specification: tool steel to is no. 3748/90. hardness 50/55 hrc. qty = 1 no/set. 3) condemning gauge for checking the play between the hole short shackle & trunion screw pin condemning size: 187.0 mm. as per rdso drg. no. 4685 & rdso-mp-mi-no-25. rev.0, jan 2006. material specification: tool steel to is no. 3748/90. hardness 50/55 hrc. qty = 1 no/set. 4) condemning gauge for checking the play between the hole long shackle & trunion nut pin condemning size:278.0 mm. as per rdso drg. no. 4685 & rdso-mp-mi-no-25. rev.0, jan 2006. material specification: tool steel to is no. 3748/90. hardness 50/55 hrc. qty = 1 no/set. 5) screw pitch gauge (go & no go) (knuckle thread -lh) size: r- 1.404mm & r-1.625 mm. as per rdso-mp-mi-no25. rev.0, jan 2006. qty = 1 no/set. 6) screw pitch gauge (go & no go) (knuckle thread - rh) size: r1.515 mm & r- 1.625 mm. qty = 1 no as per rdso-mp-mi-no-25. rev.0, jan2006. qty = 1 no/set. [ warranty period: 30 months after the date of delivery ] ]

CTN :45105964

21 May, 2026 NA

Bazpur - Uttarakhand

Tender For supply of tools and tackles materials in sugar mill - roller grooving tool size- x 6 x 40 isi/iso standard, size- x 6 x 45 isi/iso standard, size- x 6 x 50 isi/iso standard, size- 1 x 12 x 40 isi/iso standard, size- 1 x 12 x 45 isi/iso standard, size- 1 x 12 x 50 isi/iso standard, size- 1, x 12 x 40 isi/iso standard, size- 1, x 12 x 45 isi/iso standard, size- 1, x 12 x 50 isi/iso standard, carbide cutting tools. size: x 4 right hand. isi/iso standard, size: x 4 left hand. isi/iso standard, size- 1 x 6 right hand. isi/iso standard, size- 1 x 6 left hand. isi/iso standard, size- x 6 right hand isi/iso standard, size- x 6 left hand isi/iso standard, carbide tips all size isi/iso standard, h.s.s. tool bit all size isi/iso standard, tapper shank dril all size . isi/iso standard, straight shank dril all size. isi/iso standard, files all size. isi/iso standard, tape set of (3 piece) bsw all size. isi/iso standard, tap set of (3 piece) mm. all size. isi/iso standard, die nut inch/mm all size. isi/iso standard, d. spanner set all size. isi/iso standard, ring spanner set all size. isi/iso standard, box spanner set all size. isi/iso standard, pipe rinch all size. isi/iso standard, measuring tape 3 meter long . isi/iso standard, do - 5 meter long. isi/iso standard, do - 15 meter long. isi/iso standard, tin cutter 10 . isi/iso standard, do - 16 isi/iso standard, revolving centre 3 m.t. isi/iso standard, revolving centre 4 m.t. isi/iso standard, revolving centre 5 m.t. isi/iso standard, oil can capacity 200 m.l. isi/iso standard, screw pitch gauge. isi/iso standard, wooden saw(circular saw)1/8 x 18 isi/iso standard, drill socket (i) size 0 1 isi/iso standard, (ii) size- 1 2 isi/iso standard, (iii) size- 2 3 isi/iso standard, (iv) size- 3 4 isi/iso standard, (v) size- 4 5 isi/iso standard, h.s.s. black tool bar square high grade all size, steel rule 12 . isi/iso standard, steel rule 24 . isi/iso standard, screw driver set all types and sizes. isi/iso standard, pliar all type and sizes. isi/iso standard, drill chuck straight size: 1/8 to isi/iso standard, carbide tips only (all size) isi/iso standard, high carbon steel tool 10% cobalt size: to 1 isi/iso standard, knurling tool multi purpose. isi/iso standard, carbide tip tool (with handle) k-20 for (roller grooving) (i) size- 1, x 12 x 40 isi/iso standard, (ii) size- 1, x 12 x 45 isi/iso standard, (iii) size- 1, x 12 x 50 isi/iso standard

CTN :44778672

22 Apr, 2026 15.00 Lacs

Osmanabad - Maharashtra

Tender For supply of hand drilling machine , metal saw , straight grinder heavy duty with attachments , professional air blower , jig saw portable , hammer drill wired , hand held sander polisher , digital dial torque wrench , impact wrench , laser light pen , surface plate , digital screw pitch gauge , laser distance measurement instrument , palm scale , allen screwdriver wrench tool , universal quick adjustable multi function wrench spanner , double ended wrench hex socket spanner , multimeter digital , ammeter able to read upto 300 a , continuity tester , tyre pressure gauge , measuring tape , soldering iron set mechanic electric vehicle

Screw Pitch Gauge Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector