Tender For corrigendum : supply, installation and commissioning of automatic smp wmp powder filling machine in 9 10kg tin with automatic nitrogen filling system cap.100 tin per hour at verka ludhiana dairy
Tender For repair resurfacing of certain roads and connected items at bd bari mil stn - m&l preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with wire brush/brooms and finally fanning the cleaned surface with gunny bags or by mechanical blower to remove all loose dirt etc to black top surfaces, and applying evenly a priming/tack (viscosity grade paving bitumen of grade vg-10) @ 5 kg per 10 sqm to road surface bituminous asphaltic semi dense concrete consolidated thickness 30 mm with stone chippings graded aggregate with 5.5% of binder content by weight of total mix, (viscosity grade paving bitumen of grade vg-30) and 4% stone dust conforming to required specification for filler as per irc-95, 1987 (filler) by weight of mix, prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and rolled with 8 to 10 tone power roller completed all as specified and as directed., m&l for repair to potholes, any depth ,not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, applying tack coat with (viscosity grade paving bitumen of grade vg-10) @ 10.0 kg per 10 sqm of surface putting in & including premixed bituminous macadam, well rammed and sealed with binder 9.80 kg/sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller (including supply of premixed macadam, binder and chippings),completed all as specified and as directed., premix bituminous macadam laid / rolled and compacted using 8 to 12 tonne power roller to required gradient and camber, with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade vg-30 grade by weight of toal mix (consolidated thickness 75mm or less) completed all as specified and as directed., m&l providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required completed all as specified and as directed., m&l for marking lines 2.5 mm thick, dashes arrows etc of any description n. exc 10cm width/girth on road surface using hot applied thermo plastic road marking paint of approved colour confirming to bs-3262-1989 with special applicator machine all as per manufacturere instruction completed all as specified and as directed., supply and fix solar cat eye (green/red) aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc completed all as specified and as directed., supply and fixing metal tubular dealineator made out of abs round body fitted with 2 nos 65 mm dia highly reflective reflectors made out of and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in pcc 1:2:4 (150x150x300mm) type b1 complete all as specified and directed, s&f manufacturing, supplying and fixing retro reflective mandatory/ regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered wi
Tender For dnit name : repairing of plaster work and providing and laying vitrified floor tiles, water proofing, floor mounted, pcc, flush door shutters, paint work, sanitary work in house no.1413, 1414, 1415 and 146 in sector-15 faridabad and all other works contingent thereto. chargeable head - annual maintenance of hsvp staff quarters in sector-15 and 15a, faridabad for the year 2026-27. - [10.1]providing and laying of base course of floors consisting of 100 mm thick cement 1:8:16 and 100 mm sand or stone filling., [10.109]providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of engineer-in-charge., [10.67.1]providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to i.s. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement and matching pigments etc. complete. 1. size of tile 500x500 mm, [11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand), [11.6.2]15 mm cement plaster on the rough side of single or half brick wall of mix : 2. 1:6 (1 cement: 6 fine sand), [11.64.1]distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 1. new work (two or more coats) over and including water thinnable priming coat with cement primer, [11.96.1]finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade: 1. new work (two or more coats applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), [12.157.1.2]providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / panelling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge. (glazing, panelling and dash fasteners to be paid for separately) : 1.2. for fixed portion powder coated aluminium (minimum thickness of powder coating 50 micron), [12.159.2]providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (cost of aluminium snap beading shall be paid in basic item): 2. with float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm), [13.29.1]steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 1. in stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete, [13.44]providing and fixing circular/ hexagonal cast iron or m.s. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick m.s. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ m.s. sheet box by means of
Tender For bid to ras bid to ras supply of blood sedimentation rate pipette westergren graduated from 00200 mm in 1 mm divisions , glass cover microscopic rectangular 22 x 30 mm made of usp no1 glass , glass cover microscope18 mm square 0 point 10 mm 1 by 250 thick for dark ground work pkt of 14 g , replaces glass cover microscopic rectangular pv 16442 22 x 50 mm made of usp no 1 glass pkt of 14 gm , replaces glass cover microscopic rectangular pv 16446 22 x 40 mm made of usp no 1 glass pkt of 14 gm , micropipettes tips for 0 to 200 ul , micropipettes tips for 0 to 1000 ul , paper filter, round green s no point 795 9 cm pkt of 100 , paper filter square greens no point 795 51cm x 51cm pkt of 100 , semi auto analyser wash solution for , slide microscope thickness 1 point 15 mm to 1 point 35mm size 76mm x 50mm , slide microscope thickness 1 point 15 to 1 point 35mm size 75mm x 25mm , paper litmus blue , paper litmus red , pencil marking glass , keto diastix bott of 50 strips , kits for estimation of cholesterol kit of 100 ml , kits for estimation of glucose kit of 400 ml , kits for estimation of sgot ast kit of 100 ml , kits for estimation of sgpt alt kit of 100 ml , kit for triglyceride estimation 100 ml , kit for estimation of bilirubin , drabkins solution diluting solution for haemoglobin estimation by cyan met haemoglobin method , cyanmethohaemoglobin standard for haemoglobin estimation ampules of 10ml , hiv antibody 1 and 2 detection rapid test kit , kits for estimation of albumin , prothrombin time reagents to give control of 10014 secs , strips albumin and glucose bottle of 100 strips , occult blood kit , mp paracheck rapid kit , leishmans stain rtu, botle of 500 ml , kit for estimation of cpkmb 2 point 5 ml , kit for estimation cpk , kit for estimation of calcium 50 ml , kit for estimation of ldh 12 x 5ml , sterile urine container , lipase kit compatible with erba analyser , amylase kit compatible with erba analyser , erba h360 lyse for haematology analyser bott of 500 ml , erba h360 pack of 20 ltr for haematology analyser , erba h360 quality control for haematology analyser , kit for estimation total protein , fdp rapid kit of 15 test , erba norm 5 ml , erba path 5ml , cuvette 10 x 10 mm with lid , disposable centrifuge tube , estimation of direct bilirubin compatible with coral machine , estimation of triglyceride compatible with coral machine , intraoral photographic mirror set of 3 with contraster , articulating paper , patient bib plastic , cement zoe reinforced temporary 2030 gm , set of six hand niti tapered files 31 mm length with corresponding gutta percha point and paper pointscomplete kit 15 to 40 assorted size , lining cavity composite cal hyd based photocure 0 syringe of 2 point 5 gm with applicator tips , material temporary filling no mix single phase bott of 25030gm , material restorative glass ionomer type ii for filling containing powder 10015 gm and liq set of , strip polyster colour coded 0.95cmx10cm box of 100 for tooth coloured restorations , composite finishing and polishing kit , triple antibiotic paste , flowable gic light cure , retreatment rotary endodontic file assorted 21 mm , c plus files , kfile 06 21mm set of 06 , kfile 06 25mm set of 06 , chlorhexidine mouthwash bott of 100 ml , k file 20 25 mm set of 06 , k file 20 21 mm set of 06 , k file 25 25mm set of 06 , kfile 25 21mm set of 06 , k file 15 25mm set of 06 , kfile 15 21mm set of 06 , lignocaine hcl 2 percentage with adrenaline 1 ratio 80000 2 ml cart , nt magic path files , waldent premium taper gold rotary file 31mm , nt rainbow s niti rotary files assorted size 25mm , tofflemire matrix retainer //bid details 2 / 58 tofflemire matrix retainer
Tender For supply, installation & commissioning of automatic smp/wmp powder filling machine in 9/10kg tin with automatic nitrogen filling system cap.100 tin per hour at verka ludhiana dairy
Tender For annual rate tender for purchase of materials of construction / road resurfacing for year 2026-27 - brick, sand, kapchi 25 to 40 mm, grit 6 to 10 mm, handmade metal 40 to 63 mm, rubble 9 inch, cement (53 grade) 50kg, tor steel, 60 mm rubber rise, m40 paver block, 80 mm rubber rise, m40 paver block, g.s.b., dust (powder), brick masonry (1:6), stone masonry (1:6), plaster (1:4), r.c.c. slab filling 1:2:4, (to give the price of steel separately in kg), r.c.c. slab filling 1:1/2:3 (to give the price of steel separately in kg), p.c.c. (1:3:6), p.c.c. (1:4:8), pointing (1:2), yellow soil, hard murrum, handmade metal, np3 pipe 300mm, np3 pipe 450mm, np3 pipe 600mm, np3 pipe 900mm, np3 pipe 1200mm, j.c.b machine (including diesel driver), roller (including diesel driver), truck (including diesel driver), hydraulic center trailer (including diesel driver), semi dense carpet patch work on various roads in pardi municipal area, building materials and soil lifting work from pardi municipal area, compounding of tarkhuta in pardi municipal area (excavation including five wire, cross wire, cement pole), waterproofing, two coat putty or two coat of primer (including brushing), wall painting (three coat) with plastic emulsion paint, ceiling painting (three coat) with plastic emulsion paint, outer wall painting (three coat) with weather proof acrylic emulsion paint including priming coat, box cutting the road surface to proper slope and camber for making a base for the road work including removing the excavated stuff and depositing on the road side slope as directed upto 50 mt lead., scarifying gravelled macadam or bitumen macadam surface 6 cm to 10 cm depth including stacking useful materials on road side and disposing off remaining stuff, construction of granular sub-base by providing well-graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix-in place method with rotavator at omc and compacting smooth wheel roller to achieve the desired density, complete in two layers as per technical specification clause 401., providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density in two layer. by mechanical means with 1 km lead, providing and laying bituminous base course 75 mm thick compacted in two layers with tack coat of asphalt (vg-30) 80/100 at the rate of 2.5 kg/10 sqmt and using b.t. stone aggregates of required gradation and asphalt 80/100 grade for mixing @ 1.99% by weight of total mix including heating the aggregate and asphalt by drum mix plant and spreading the same by paver finisher and consolidation with vibratory roller including providing all materials, equipment’s, tools and plants, oil, kerosene, fire wood, labour charges etc. complete., providing and laying 50mm thick compacted b.m. with b.t. aggregate as per mort&h specification and asphalt grade (vg-30) 80/100 for tack coat at 2.5 kg/10 sqmt with mechanical sprayer and bitumen grade 80/100 for mixing at the rate 34.0 kg/m.t. i.e. 3.4% of total mix including heating the aggregate and asphalt by drum mix plant and spreading the same by paver censor finisher and consolidation with vibratory roller including providing all materials, equipments, tools and plants, oil, kerosene, fire wood, labour charges etc. complete., providing and laying 25 mm thick compacted semi dense bituminuous concrete using stone chips as per mort&h gradation and asphalt grade (vg-30) 80/100 for tack coat at 2.5 kg/10 sqmt with mechanical sprayer and 80/100 grade asphalt for mixing @ 5.0% by weight of total mix for binder including heating the aggregate and asphalt by drum mix plant and spreading the same by paver finisher and consolidation with vibra
Tender For supply of housekeeping materials d d - floor surface cleaner , bleaching powder , napthalene balls , urinal pad , hand washing soap - 100 grams , room freshners spray - 200ml or 240ml , glass cleaner liquid - 500ml , disposable hand gloves -in pairs , air freshners , cleaning acid , insect killer spray 200 ml , toilet paper rolls - 200 grams , soft brooms - 30inch long , floor scrubbing brush , plinth fit mops for floor cleaning with stick , plinth fit mops for floor cleaning with out stick , closet cleaning brush , duster cloth - cotton with good quality , cob web stick - 15 feet long with good quality , hand wash liquid soap in dispenser - 250ml , toilet cleaner -1000ml , washing bar soap 500 gram , glass cleaning mop - 10 feet , garbage cover - extra lage , insect killer liquid puls machine , insect killer liquid refill for the above machine , cotton cloth mask - cotton with good quality , rubber hand gloves - heavy duty in pair , hand wah liquid for filling