Latest screw spanner Tenders | Government screw spanner Tenders

CTN :43034841

13 Dec, 2025 11.87 Lacs

Bangalore - Karnataka

Tender For supply of 20mm diameter sdr cpvc pipe , 20mm diameter cpvc elbow , 20mm cpvc collar , 20mm cpvc mta , 20mm cpvc tee , cpvc tank nipple 20 mm , galvanised iron clamp 20mm , cpvc ball valve of size 1inch , 25mm dia cpvc fta , 25mm dia cpvc mta , 25mm cpvc tee , 25mm 1 inch cpvc collar , 25mm dia 1 inch cpvc elbow , cpvc reducer collar , pvc connection pipe , brass gun metal gate valve , pillar cock with aerator , cpvc solvent 237 ml , parryware health faucet , health faucet gun , wash basin , waste coupling , waste pipe , rag bolt , angle cock , mirror small , extension nipple 1inch , extension nipple 2 inch , extension nipple 3 inch , 25mm cpvc tank nipple , cpvc foot valve , cpvc reducer tee , sealent silicon , galvanised iron clamp of size , cpvc float valve , screw die set , screw spanner , 14 no pipe wrench , 18 no pipe wrench , bosch drill machine 550 w , brass gate valve , cpvc gate valve , brass gun metal stop cock , pillar cock spindle , bib cock washer 15 mm , connection pipe washer , pillar cock washer , thread ball , telflon , water proof tape , 25mm cpvc pipe , 20mm cpvc fta , cpvc ball valve , m seal ) /bid number: gem/2025/b/6962089 * /dated: 03-12-2025 & & / bid document1 / 54

State Government

CTN :42880234

08 Dec, 2025 96.35 Lacs

Bagalkot - Karnataka

Tender For corrigendum : tender for supply of furniture, t&p and safety materials for utilization operation division vijaypur and rt division bagalkot coming under operation zone kptcl bagalkote conforming to our technical specifications, f.o.r.d at store/site including insurance and transportation and un-loading. - digital tong tester, ac clamp meter-200ma to 200a,accuracy rate - 0.01 to 0.1 a, lcr meter, display, phase sequence meter, measure the phase sequence (r,y,b) & open phase condition through led and buzzer., tool box with accessories-high quality tool box with tools like nut drivers, allen keys, screw driver set, heavy duty grip plier with nose plier, wire cutter, tester electrician wire stripper., multimeter,, tong tester, hack saw frames +b185, double end spanner 12 nos. per set, tube spanners 12 nos. per set, ring spanners 12 nos. per set, insulation tester (megger) 500 v, insulation tester (megger) 2.5 kv - 5 kv, frp telescopic discharge rod10 ft, high voltage detector, hand operated crimping tool 25 sqmm to 400 sqmm, frp wall extension ladder, open pulley capacity 2 ton, double pulleycapacity 3ton, ttubular telescopic tree pruner, bolt cutter - 24inches (rubber grip handle, hardened alloy steel jaws & center cut jaw configuration with max cutting capacity 12 mm, rubber hand gloves 11 kv, chain saw (motorised), extremely robust and long lasting chain saw. highly suitably for cutting firewood, thinning shrubs and bushes and shaping trees, telescopic earthing rod, sf6 gas filled in 25 kg cylinders (including non returnable carbon steel cylinders), sf6 gas filled in 50 kg cylinders (including non returnable carbon steel cylinders), xerox machine, polypropyline rope of 26 mm dia in kg, multimeter electronic type, clamp meter, ac leakage clamp meter (ma) (dcm 10 a), head torch, hydraulic crimping tool manual with suitable dies for crimping lugs of size upto 400 sqmm set), electrical safety helmet attached with electronic induction tester, frp telescopic discharge rod 16 ft, safety belt, minimum 2 m rope length, protective eye wear for safety with integral hands free led lighting, hi visibility reflective rain wear, hi visibility reflective jacket, rubber hand gloves 33 kv, rubber hand gloves 15 kv, good quality heavy duty computer table, printer cum xerox cum scanner, office metal rack, good quality heavy duty steel almirah, good quality heavy duty computer chairs, good quality heavy duty s type full armed netted chairs medium back non rotatable & non foldable, branded plastic arm chairs, officers tables with draw, supply of good quality heavy duty office table, supply of good quality heavy duty metal rack, supply of good quality heavy duty office executive revolving chair ( high back with five legged ms fabricated revolving heavy guage base with twin wheel castors, with adjustable height & back tilt with fabric un-pholstered cushioned seat & mesh back rest, with adjustable armrest

State Government

CTN :42880235

08 Dec, 2025 80.62 Lacs

Bagalkot - Karnataka

Tender For corrigendum : tender for supply of furniture, t&p and safety materials for utilization operation division gadag and rt division hubballi coming under operation zone kptcl bagalkote conforming to our technical specifications, f.o.r.d at store/site including insurance and transportation and un-loading - double pulleycapacity 3ton, head torch, chain pulley block 2.5 ton capacity, frp telescopic discharge rod10 ft, insulation resistance tester megger make, box spanners 12 no set, megger 2kv battery operated, grass cutting machine electrically operated for sub stations, single sleeve pulley, hudralic jack 5 ton capacity, high voltage detector, insulated cutting pliers 8 inches size, insulated cutting pliers 12 inches size, sf6 gas filled in 25 kg cylinders (including non returnable carbon steel cylinders), hand operated crimping tool 25 sqmm to 400 sqmm, frp wall extension ladder, open pulley capacity 2 ton, bolt cutter - 24inches (rubber grip handle, hardened alloy steel jaws & center cut jaw configuration with max cutting capacity 12 mm, manilla rope 3/4inches(one bundle of 100 m), manilla rope 1inches (one bundle of 100 m), rubber hand gloves 11 kv, chain saw (motorised), extremely robust and long lasting chain saw. highly suitably for cutting firewood, thinning shrubs and bushes and shaping trees, telescopic earthing rod, chain pulley block 2 ton capacity, sf6 gas filled in 50 kg cylinders (including non returnable carbon steel cylinders), xerox machine, polypropyline rope of 32 mm dia in kg, polypropyline rope of 26 mm dia in kg, adjustabale screw spanner 12inches, adjustabale screw spanner 8inches, insulated gos operating handle/rod for redesigned & modified gos, screw driver 8inches, earth resistance tester, sf6 gas leak detector, clamp meter, ac leakage clamp meter (ma) (dcm 10 a), digital multi meter, insulation tester (megger) 500 v, insulation tester (megger) 2.5 kv - 5 kv, telescopic ladder aluminium 6 m height, hydraulic crimping tool manual with suitable dies for crimping lugs of size upto 400 sqmm set), electrical safety helmet attached with electronic induction tester, grounding sticks extendable upto 18 ft, frp telescopic discharge rod 16 ft, safety belt, minimum 2 m rope length, protective eye wear for safety with integral hands free led lighting, hi visibility reflective rain wear, hi visibility reflective jacket, rubber hand gloves 33 kv, rubber hand gloves 15 kv, good quality heavy duty computer table, printer cum xerox cum scanner, office metal rack, good quality heavy duty steel almirah, good quality heavy duty computer chairs, good quality heavy duty s type full armed netted chairs medium back non rotatable & non foldable, branded plastic arm chairs, officers tables with draw, supply of good quality heavy duty office table, supply of good quality heavy duty metal rack, supply of good quality heavy duty office executive revolving chair ( high back with five legged ms fabricated revolving heavy guage base with twin wheel castors, with adjustable height & back tilt with fabric un-pholstered cushioned seat & mesh back rest, with adjustable armrest

State Government

CTN :42880236

08 Dec, 2025 98.94 Lacs

Bagalkot - Karnataka

Tender For corrigendum : tender for supply of furniture, t&p and safety materials for utilization operation division hubballi and 220kv narendra dharwad coming under operation zone kptcl bagalkote conforming to our technical specifications, f.o.r.d at store/site including insurance and transportation and un-loading - hand operated crimping tool 25 sqmm to 400 sqmm, silicagel, frp wall extension ladder, tilltable degree varation tower ladder, aluminium tilltable tower with wheels and standing flatforms 22 mtrs height, open pulley capacity 2 ton, double pulleycapacity 3ton, clamp meter, ac leakage clamp meter (ma) (dcm 10 a), protective eye wear for safety with integral hands free led lighting, ttubular telescopic tree pruner, bolt cutter - 24inches (rubber grip handle, hardened alloy steel jaws & center cut jaw configuration with max cutting capacity 12 mm, manilla rope 3/4inches(one bundle of 100 m), manilla rope 1inches (one bundle of 100 m), rubber hand gloves 11 kv, chain saw (motorised), extremely robust and long lasting chain saw. highly suitably for cutting firewood, thinning shrubs and bushes and shaping trees, sf6 gas filled in 25 kg cylinders (including non returnable carbon steel cylinders), sf6 gas filled in 50 kg cylinders (including non returnable carbon steel cylinders), xerox machine, polypropyline rope of 32 mm dia in kg, insulated gos operating handle/rod for redesigned & modified gos, polypropyline rope of 26 mm dia in kg, adjustabale screw spanner 12inches, adjustabale screw spanner 8inches, screw driver 8inches, earth resistance tester, sf6 gas leak detector, insulation tester (megger) 500 v, insulation tester (megger) 2.5 kv - 5 kv, telescopic ladder aluminium 6 m height, head torch, hydraulic crimping tool manual with suitable dies for crimping lugs of size upto 400 sqmm set), electrical safety helmet attached with electronic induction tester, grounding sticks extendable upto 18 ft, frp telescopic discharge rod 16 ft, safety belt, minimum 2 m rope length, hi visibility reflective rain wear, rubber hand gloves 33 kv, rubber hand gloves 15 kv, good quality heavy duty computer table, printer cum xerox cum scanner, office metal rack, good quality heavy duty steel almirah, good quality heavy duty computer chairs, good quality heavy duty s type full armed netted chairs medium back non rotatable & non foldable, branded plastic arm chairs, officers tables with draw, supply of good quality heavy duty office table, supply of good quality heavy duty metal rack, supply of good quality heavy duty office executive revolving chair ( high back with five legged ms fabricated revolving heavy guage base with twin wheel castors, with adjustable height & back tilt with fabric un-pholstered cushioned seat & mesh back rest, with adjustable armrest

State Government

CTN :42880237

08 Dec, 2025 99.72 Lacs

Bagalkot - Karnataka

Tender For corrigendum : tender for supply of furniture, t&p and safety materials for utilization operation divisions belagavi, chikkodi and belagavi rt division coming under operation zone kptcl bagalkote conforming to our technical specifications, f.o.r.d at store/site including insurance and transportation and un-loading. - insulated gos operating handle/rod for redesigned & modified gos, head torch, hydraulic crimping tool manual with suitable dies for crimping lugs of size upto 400 sqmm set), electrical safety helmet attached with electronic induction tester, grounding sticks extendable upto 18 ft, frp telescopic discharge rod 16 ft, safety belt, minimum 2 m rope length, protective eye wear for safety with integral hands free led lighting, hi visibility reflective rain wear, hi visibility reflective jacket, gum boots, rain coat with duck back, rubber hand gloves 33 kv, rubber hand gloves 15 kv, good quality heavy duty computer table, printer cum xerox cum scanner, office metal rack, good quality heavy duty steel almirah, good quality heavy duty computer chairs, good quality heavy duty s type full armed netted chairs medium back non rotatable & non foldable, branded plastic arm chairs, officers tables with draw, supply of good quality heavy duty office table, supply of good quality heavy duty metal rack, supply of good quality heavy duty office executive revolving chair ( high back with five legged ms fabricated revolving heavy guage base with twin wheel castors, with adjustable height & back tilt with fabric un-pholstered cushioned seat & mesh back rest, with adjustable armrest, polypropyline rope of 32 mm dia in kg, polypropyline rope of 26 mm dia in kg, multimeter electronic type, screw driver 12 inches size, screw driver18 inches size, insulated cutting pliers 8 inches size, insulated cutting pliers 12 inches size, rechargeable 5 w led hand torch, adjustabale screw spanner 12inches, adjustabale screw spanner 8inches, screw driver 8inches, rubber sheet, drilling machine portable type, specific gravity testing instrument, earth resistance tester, d.c. volt meter range 3 v to 5 v, sf6 gas leak detector, clamp meter, ac leakage clamp meter (ma) (dcm 10 a), digital multi meter, insulation tester (megger) 500 v, insulation tester (megger) 2.5 kv - 5 kv, transil oil dielectric breakdown testkit, allen keys, telescopic ladder aluminium 6 m height

State Government

CTN :41217191

11 Dec, 2025 NA

Kheda - Gujarat

Tender For corrigendum : supply of mechanical measuring instruments & spanners (tools & tackles) at wtps - digital outside micrometer with large digital display. size : 0 - 25mm, resolution: 0.0001 mm., digital outside micrometer with large digital display. size : 25 - 50mm, resolution: 0.0001 mm., digital vernier calipers size - 0-300 mm mitutoyo make, allen key set black finish of mm series having sizes 1.5mm ,2mm,2.5 mm ,3mm ,4mm ,5mm ,6mm , 8mm , & 10mm allen keys, taparia make: allen keys (mm.sizes) black finish ,is 3082-1988 sizes- 12 mm,14mm, 17mm, 19mm, 22mm, 24mm, adjustable spanners , 110 mm length ,least max. opening 13 mm, chrome plated, with soft grip, chain pipe wrench, taparia product no: cpw 06, length:1000 mm, suitable for pipe dia. 150 mm, hss drill bit set 3 mm to 12 mm, weighing scale digital, polyester webbing slings with reinforced eye loop at both ends as per en 1492-1 size 125mm x 5t x 3mtr x red, polyester webbing slings with reinforced eye loop at both ends as per en 1492-1 size 125mm x 5t x 5mtr x red, copper round bar of size 40mm x5oo mm long, polyester flat belt webbing sling with plain eye loops at both ends, conf. to bs: 3481/part-ii capacity: 5 ton, std length: 5 mtrs, bolt cutter length-450 mm, chain pulley block cap-1 ton x3 mtr lift, chain pulley block cap-2 ton light weight, chain pulley block cap 3 ton, lift: 4.5 m, mitutoyo make dial gauge with magnetic stand : 0-10mm, steel wire rope sling with soft eye splice at both ends conf. to is: 5245/part-ii capacity: 10 ton, rope dia: 32 mm, std. length: 2 mtrs, taparia make t handle hex key. product no. tak 5., taparia make t handle hex key. product no. tak 6., torque wrench standard generally confirming to is 6789:2008 mac master product no-tw-2000r (range-1000-2000 lb.ft/135-275 kgf.m/1350-2700 n.m), torque wrench standard generally confirming to is 6789:2008 taparia product no-tw1000 (range-400-1000 lb.ft/55-140 kgf.m/540-1380 n.m), allen key set black finish of inch eries having sizes 1/16" , 5/64" ,3/32" , 1/8",5/32",3/16",7/32",1/4",5/16",3/8" allen keys, grease gun, polyester webbing slings heving specification capacity- 1tons,length-3mtr and width-50mm (max), screw spanner-12", non sparkable fixed spanner set : size: 6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27,25x28,30x32., fix spanner size 12x13 mm ., ring spanner size 12x13 mm, fix spanner size 10x11 mm, jhalani/tapariaring spanner 10x11 mm, fix spanner size 14x15 mm jhalani make, fix spanner 16x17 mm, jhalani/tapariaring spanner 16x17 mm, fix spanner 18x19 mm, jhalani/tapariaring spanner 18x19 mm, fix spanner size 24x26 mm, ring spanner size 24x26 mm, fix spanner 30x32 mm, ring spanner 30x32 mm, steel wire rope sling with soft eye splice at both ends, conf. to is: 5245/part-ii capacity: 1 ton, rope dia: 10 mm, std. length: 3 mtrs, steel wire rope sling with soft eye splice at both ends conf. to is: 5245/part-ii capacity: 2 ton, rope dia: 16 mm, std. length: 3 mtrs, steel wire rope sling with soft eye splice at both ends conf. to is: 5245/part-ii capacity: 5 ton, rope dia: 22 mm, std. length: 5 mtrs, circlip plier external (bent nose),product no: 1444.7,capacity :19.6 mm, length:180 mm, taparia or jhalani or any equivalent make, internal circlip plier size 8" no1440 taparia make, two stage two gauge acetylene gas pressure regulator model : dura a-1.5 - esab make, two stage two gauge oxygen gas pressure regulator - model no : dura 0-10 - esab make, hanna make tds tester (0-2000 ppm), model: hi98301, hanna make ph meter, model: hi98107

CTN :42963965

19 Dec, 2025 NA

Kurla - Maharashtra

Tender For supply of 15 types of spanner d d - 4000700008 spanner double ended open jaw size 12x13mm chrome vanadium steel chrome plated , 4000700010 spanner double ended open jaw size 14x15mm chrome vanadium steel chrome plated , 4000700012 spanner double ended open jaw size 16x17mm chrome vanadium steel chrome plated , 4000700014 spanner double ended open jaw size 18x19mm chrome vanadium steel chrome plated , 4000700016 spanner double ended open jaw size 20x22mm chrome vanadium steel chrome plated , 4000700021 spanner double ended open jaw size 30x32mm chrome vanadium steel chrome plated , 4000700022 spanner double ended open jaw size 32x36mm chrome vanadium steel chrome plated , 4000700026 spanner double ended open jaw size 41x46mm chrome vanadium steel chrome plated , 4000700031 spanner double ended open jaw size 24x26mm chrome vanadium steel chrome plated , 4000700080 d e open jaw spanner size 6 32mm 12 pcs 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22 21x23 24x26 25x28 and 27x32 , 4000700097 special spanner 36 mm oal 400mm , 4000700110 spanner double ended open jaw size 24x27mm chrome vanadium steel chrome plated , 4000800070 ring spanner bihexagon shallow off set 6 32mm6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22 21x23 24x27 25x28 30x32 , 4001400065 socket bi hexagon 1 2 sq. drive size 17mm a f , 4001400066 socket bi hexagon 1 2 sq. drive size 18mm a f as per is7381 1986 ) /bid number: gem/2025/b/6939278 * /dated: 28-11-2025 & & / bid document1 / 16

CTN :42948131

08 Dec, 2025 NA

Hisar - Haryana

Tender For supply of 8340 001140 cross bracing for tnt extendbl f suptd , 5340 000968 padlocks ig 4 levers 50mm , 5120 003039 spanner open jaw fixed de 19x2mm , ihb0245 tape niwar undyed 50mm , 5315 000073 pins cotter split steel . 5mmx25mm , 5315 000077 pins cotter split steel 2 5mmx 50mm , 7310 000115 cobl burner casing mk 2 plated front

CTN :42950074

08 Dec, 2025 NA

Jabalpur - Madhya Pradesh

Tender For supply of spanner - 56 a to part no: icm-1961 and ds cat no: 5120-004558 2shts (dc no: 19574-w and dc date: 09 , spanner 60 a to part no: icm-1965 and ds cat no: 5120-004562 2shts (d c no: 19574-w and dc date: 09- , spanner, wrench (for quick release nut rh & lh) to part no: icm-2122 and ds cat no: 5120-007740 (dc , spanner open jaw fixed 4a single ended 60 a/f to part no: icm-1970, d esign no: ilg-ta-014 and ds ca , spanner-63a to part no: icm-1972 and ds cat no: 5120-004565 (2 shts) [ dc no: 19574-w and dc date: 09 , spanner double ended 1a to part no: icm-1973 and ds cat no: 5120-0045 66 (2shts) [ dc no: 18844-w and

Central Government/Public Sector

CTN :42902571

15 Dec, 2025 NA

Vadodara - Gujarat

Tender For supply of double ended deep offset ring spanner set 6 to 32 mm , combination spanner set ring and open 1/4 to 1 inch , combination spanner set ring and open 6 to 32 mm , double ended open jaw fix spanner set 1/4 to 1-1/2 inch , double ended deep offset ring spanner set 1/4 to 1-1/4 inch , double ended open jaw fix spanner set 6 to 32 mm

Screw Spanner Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

Central Government/Public Sector