Latest seal wear ring Tenders | Government seal wear ring Tenders

Central Government/Public Sector

CTN :45709670

11 Jul, 2026 NA

Amravati - Maharashtra

Tender For supply of seal wear ring without vent hole for ctrb class-e [6 inch x 11 inch ] for freight stock 22.3/22.9 ton axle load make- timken part no. k-153392-00 str. no. ab/rb-39 - 2002 rev.-3 of dec.-2006 amendment-2 of 2008 or latest. [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45712469

18 Jul, 2026 NA

Puruliya - West Bengal

Tender For supply of seal wear ring of cm hp-1103

Central Government/Public Sector

CTN :45709681

13 Jul, 2026 NA

Multi City - Multi State

Tender For supply of one set consisting of following gauges- sr. no.1 : grease seal od ovaility checking gauge- gauge description - base plate diameter 300mm with basic accessories, dial indicator and od master gauge.(i) for measurement of od 209.187 at 6mm height for timken drg. no. e-58606 (hdl seal). (ii) for measurement of od 209.75 at 6mm height for skf drg. no. se-bt2-8515 d-23 (skf seal). (iii) od master gauge : od 209.78mm, with nabl calibration. (iv) digital dial indicator, model: 543-700, least count: 0.01mm, travel: 0-12.7mm, (purchased item), qty- 01 set, make: mitutoyo or equivalent. sr. no.2 : seal wear ring id ovaility checking gauge- gauge description-base plate diameter 300mm with basic accessories, dial indicatorand id master gauge. (i) for measurement of id 144.42 at 10mm height for timken drg. no. b-204944 (seal wear ring). (ii) for measurement of id 144.419 at 10mm height for neil drg. no. pesd-6075 (wear ringfor 6 x 11 class e ctrb). (iii) for measurement of id 144.45 at 10mm height for timken drg. no.rd-1637504 aa-13 (seal wear ring). (iv) id master ring gauge : id 144.42mm, with nabl calibrated. (v) digital dial indicator, model: 543-781, least count: 0.001mm, travel: 12.7mm, (purchased item), qty- 01 set, make: mitutoyo or equivalent. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45686495

01 Jul, 2026 NA

Dharwad - Karnataka

Tender For comprehensive warranty extension of transportation engineering lab equipment - 1. rolling thin film oven 2. constant temperature waterbath for marshal test with digital controller-(9 moulds)-(150 mm). 3. standard penetrometer for bitumen-automatic digital timer with geared height adjustment & dial gauge - astm d5 4. marshal stability testing machine-digital-4" & 6" dia-combined 5. stripping test apparatus-is 6241, aashto t283 6. ductility testing machine - (semi automatic model) -(10-100 mm/min speed) -(refrigerated)- 7. planetary mixer-for bituminous mix-digital-10 ltrs 8. sieve shaker-gyratory-for 20/30 & 45cm dia sieves with digital timer 9. buoyancy balance 10. bitumen extractor-motorised with variable speed with digital rpm indicator 11. ring and ball apparatus-(programmable) -(digital) -(astm d36) with accessories 12. hot air oven - digital-90x90x60 cm-250c-inner s.s. 13. rotary vacuum evaporator with motorized lift-flask capacity-50-5000 ml 14. automatic compactor for marshal test - (4" and 6" dia specimen)-(universal model)- 15. cleaveland flash point apparatus-with energy regulator 16. absolute and kinematic viscosity bath for 4 viscometers (astm d2171, astm d2170) at indian institute of technology

State Government

CTN :45147318

27 Jun, 2026 40.52 Lacs

Jharsuguda - Odisha

Tender For bid to ras corrigendum : supply of deflector side liner leading mill hp1103 , deflector liner lower,sl-15 mill hp1103 , deflector liner lower,sl-20 mill hp1103 , deflector liner mid,sl-25 mill hp1103 , deflector liner mid,sl-30 mill hp1103 , intermediate liner leading mill hp1103 , intermediate liner trailing mill hp1103 , ceramic plug for deflector liner hp1103 , welding plug for deflector liner hp1103 , air restriction ring segment , deflector liner mid,sl-35 mill hp1103 , seal wear ring for journal mill hp1103 , head liner- 4 for head liner assembly , head liner-2 for head liner assembly , head liner-6 for head liner assembly , trunion shaft bushing for coal mill hp1103

Central Government/Public Sector

CTN :45637771

25 Jun, 2026 NA

Multi City - Gujarat

Tender For auction sale of others - scrap old, used and unserviceable m.s. skf and timken cartridge tapered roller bearing (ctrb) and associated component. the lot includes internal and external seals, distance ring( rd), cone assemblies,double caps backing ring,cone and backing spacers, seal wear rings, cages and roller sets with hdl seals. the material is predominantly ferrous, with rubber (approx rubber =3%, m.s = 97%) attachment present only on the cone assemblies and hdl seals, mode of delivery is by weight. only manual loading is permitted.loading shall commence from the front side without any sorting of material. total lot qty - 12 mt, custodian:- sse scrap bvp, location - roller bearing store mg workshop bvpw . as is where is basis. loading by purchaser.fdp 50 days

Central Government/Public Sector

CTN :45633360

29 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - condemned ctrb scrap of cup, cone, spacer, seal wear ring, end cap screw and locking plate etc.

Central Government / Public Sector

CTN :45591761

29 Jun, 2026 NA

Multi City - Telangana

Tender For auction sale of depot ferrous scrap - 12268rp26c, 98413454, quantity- 46.920 mts. scrap condemned unserviceable rubber pads, hhp loco load pads, mounting pads, em pads, thrust pads, resilient pads, anti vibrating mounting pads, sand witch mounting pads, modified and unmodified mounting pads, metal bonded rubber pad for side bearer, rubber rolling ring pad, lateral bump stop of lhb traction rod bushes, tm nose link bushes, buffer spring rubber pads, rubber element, rubber pad for draw gear, schaku draft gear rubber spring pads, of sort and sizes with or without attachments including side load, cc and em pads, round pads. approx. gross weight- 46920 kgs approx. ferrous weight- 34936.85 kgs approx. rubber weight- 11983.15 kgs location- bin no- 268, left side of road no- 2. hsn code- 72044900. gst- 18 percent. note- delivery on actual weighment basis only. special note: overload of the carrying capacity of the vehicle will not be permitted at the time of taking delivery as per motor vehicle act 1988.

Central Government/Public Sector

CTN :45021688

30 Jun, 2026 NA

Bangalore - Karnataka

Tender For corrigendum : supply of small diameter ring rolling mill

corporations/Associations/Others

CTN :45532876

27 Jun, 2026 NA

Kolkata - West Bengal

Tender For renovation and replacement of damaged and worn out spare parts with new ones for sludge pump-1 with ancillary works at wtp-iv, garden reach water works.- manufacturing, supply & delivery of pump - shaft made off ss-316 for 647 cum/hr., 15 mtrs head sludge , pump with necessary keys etc, as per sample at garden reach water treatment plant., , manufacturing, supply & delivery of shaft -sleeve, , made of ss-316 for 647 cum/hr., 15 mtrs head sludge, , pump as per sample at garden reach water, , manufacturing, supply &delivery of casing ring made of nici for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant., , manufacturing, supply &delivery of split gland made of nici for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant, , manufactering, supply delivery of baaring housing made of nici for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant., , manufactering, supply delivery of lock nut of impeller made of ss for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant., , manufactering, supply & delivery of lock nut of bearing made of ss for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant., , balancing of rotating assembly of 647 cum/hr., 15 mtrs head sludge pump including loading, unloading and transportation from and to at garden reach water treatment plant, , total rotating assembly & keep it at a suotable place after opening the top cover of pump unit. dismantling the bearing housing at both end & as per direction of eic., , manufacturing, supply & delivery of impeller made of nici for 647 m?/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant, , manufacturing.. supply delivery of bearing housing cover (d.e side) made of nici for 647 m?/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant, , manufacturing, supply &delivery of bearing housing cover (n.d.e side) made of nici for 647 m?/hr., 15 mtrs head sludge pump as per sample at tp-1, grww. garden reach water treatment plant, , manufacturing, supply &delivery of supporting foot made of nici for 647 m?/hr., 15 mt head sludge pump as per sample at garden reach water treatment plant., , m.s plate as per is: 2062-2011/latest revision, make: sailitataijindal (b) above 2 mm upto 10 mm thickness, , fabricating m.s. specials of different diameter in shop out of 8 mm to 12 mm thick m.s plates supplied depart-mentally, cutting the plates to exact size & shape by gas cutting device and/or by adopting any other approved type of mechanical means, bending the same in true curvature by template and rolling machine of approved design including proper marking, levelling joints followed by electric arc welding - longitudinal and circumferential, as necessary, using standard electrodes as per i.s.specification including edge preparation, electricity charges and hydraulic testing of the fabricatedpiece all complete as per specification and direction of the engineer-in-charge. [the engineer-in-charge shall approve the electrodes for are welding before use. fabrication of m.s. flange to form m.s flanged tail piece shall not be considered as m.s. special], , cutting to requisite length or shape departmental r.s. joists, channels, angles, tees, plates etc. (payment to be made on area of cut surface), , welding in m.s. structural work with gas or electric: (a) tack weld, , welding in m.s. structural work with gas or electric: (b) continuous weld., , supply of m.s. flange (slipper type) as per is-6392 table 17 thickness 12mm nb diameter in mm 350, , flange joint to c.i./d.i/ms. pipes and specials including supply of rubber gasket, nuts, bolts, washers etc. of best quality to make the joint watertight at required hydraulic pressure all complete as per specification & direction of the engineer-in-charge. di

Seal Wear Ring Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors