Get complete information related to latest Seal Blower Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Seal Blower Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Seal Blower Tenders.
Tender For supply of water and electrical material at gp/manegaon/zp/ngp/tender no1/2026-27/1st call - cleansol bleaching powder, bleaching powder(calcium hypochlorite), pvc pipe 75 mm 4 kg, pvc pipe 60 mm 4 kg, pvc pipe 6 kg "3", pvc pipe 6 kg "4", pvc pipe 6 kg "2.1/2", pvc maintenance coupling 6kg "3", pvc maintenance coupling 6kg "4", pvc maintenance coupling 6kg "5", g i pipe 1", g i pipe 2", g i pipe 3", g i pipe 4", g i pipe 2.5", g i mechanical joint "4", g i mechanical joint "6", g i mechanical joint "2.1/2", sluse vleve 2", sluse vleve 2.5", sluse vleve 3", air valve 1" singal ball, air valve 2" double ball, flanch "2", flanch "2.5", gi elbo 1", gi elbo 2", gi elbo 2.5", pvc elbo 1", pvc elbo 2", pvc elbo 2.5", pvc tee 1", pvc tee 2", pvc tee 2.5", pvc tee 6kg "4", pvc tee 6kg "6", pvc bend "1", pvc bend 2", pvc bend 2.5", gi tee 1", gi tee 2", gi tee 2.5", gi bend 1", gi bend 2", gi bend 2.5", gi coupling 1", gi coupling 2", gi coupling 2.5", pvc coupling 2.5", pvc sadal 2", pvc sadal 2.5", pvc sadal 3", soluation, 3 hp 8 steg pump ( submursibl pump), 3 hp 8 steg pump ( submursibl pump), main switch 5 hp, 1/18 1 mm wire aluminium, 1/18 wire 1.5 mm aluminium, 1/18 wire copper, 2.5 mm service wire, 4mm service wire, 6mm service wire, 8mm service wire, pendent holder anchor, tape roll anchor, 5w led bubl havells / wipro / philips, 7w led bubl havells / wipro / philips, 9w led bubl havells / wipro / philips, 12w led bulb havells /wipro / philips, 15w led bulb havells / wipro / philips, 20 w led bulb havells / wipro / hilips, 23w led bulb havells / wirpo / philips, 26w led bubl havells / wipro / philips, 30w led bubl havells / wipro / philips, 15w srteet light havell / wipro / philips, 18w srteet light havell / wipro / philips, 20w srteet light havell / wipro / philips, 24 w srteet light havell / wipro / philips, 30 w srteet light havell / wipro / philips, 36 w srteet light havell / wipro / philips, 40 w srteet light havell / wipro / philips, 50 w srteet light havell / wipro / philips, claim for street light, led bulb fitting 18 to 30w, ceiling fan (all type), desert cooler (all type)
Tender For supply of water and electrical material at gp/nilgaon/zp/ngp/tender no1/2026-27/2nd call - cleansol bleaching powder, bleaching powder(calcium hypochlorite), pvc pipe 75 mm 4 kg, pvc pipe 60 mm 4 kg, pvc pipe 6 kg "3", pvc pipe 6 kg "4", pvc pipe 6 kg "2.1/2", pvc maintenance coupling 6kg "3", pvc maintenance coupling 6kg "4", pvc maintenance coupling 6kg "5", g i pipe 1", g i pipe 2", g i pipe 3", g i pipe 4", g i pipe 2.5", g i mechanical joint "4", g i mechanical joint "6", g i mechanical joint "2.1/2", sluse vleve 2", sluse vleve 2.5", sluse vleve 3", air valve 1" singal ball, air valve 2" double ball, flanch "2", flanch "2.5", gi elbo 1", gi elbo 2", gi elbo 2.5", pvc elbo 1", pvc elbo 2", pvc elbo 2.5", pvc tee 1", pvc tee 2", pvc tee 2.5", pvc tee 6kg "4", pvc tee 6kg "6", pvc bend "1", pvc bend 2", pvc bend 2.5", gi tee 1", gi tee 2", gi tee 2.5", gi bend 1", gi bend 2", gi bend 2.5", gi coupling 1", gi coupling 2", gi coupling 2.5", pvc coupling 2.5", pvc sadal 2", pvc sadal 2.5", pvc sadal 3", soluation, 3 hp 8 steg pump ( submursibl pump), 3 hp 8 steg pump ( submursibl pump), main switch 5 hp, 1/18 1 mm wire aluminium, 1/18 wire 1.5 mm aluminium, 1/18 wire copper, 2.5 mm service wire, 4mm service wire, 6mm service wire, 8mm service wire, pendent holder anchor, tape roll anchor, 5w led bubl havells / wipro / philips, 7w led bubl havells / wipro / philips, 9w led bubl havells / wipro / philips, 12w led bulb havells /wipro / philips, 15w led bulb havells / wipro / philips, 20 w led bulb havells / wipro / hilips, 23w led bulb havells / wirpo / philips, 26w led bubl havells / wipro / philips, 30w led bubl havells / wipro / philips, 15w srteet light havell / wipro / philips, 18w srteet light havell / wipro / philips, 20w srteet light havell / wipro / philips, 24 w srteet light havell / wipro / philips, 30 w srteet light havell / wipro / philips, 36 w srteet light havell / wipro / philips, 40 w srteet light havell / wipro / philips, 50 w srteet light havell / wipro / philips, claim for street light, led bulb fitting 18 to 30w, ceiling fan (all type), desert cooler (all type)
Tender For auction sale of depot ferrous scrap - ubl/gsd/0516-0621/ms/26/b [pl no.98987331] condemned and un- serviceable ms scrap consisting of ms/gi sheets, boilers, tube/pipes, cut channels, alternator covers, ceiling fan rods, empty solar panels, bend, elbows, flanges, angles, frames, doors, trolleys, boards, nut & bolt, footsteps, fan motor covers, fan guard, sheets/plates, grills, shutters, ms bowls, ms trays, chaqure plate, air filter, racks, boxes, rods/bars, ms window frames off sizes, tanks, steel bars in window frames, tie bars, coach light cut up parts, iron doors off sorts & sizes. ms electrical boxes, ms rope/chain, channels, rail trolley wheel set, battery boxes, battery containers and ms stand, empty electrical boxes, packing rings, angles off sizes, speed breaker, different types of boards, wagon body cut parts, rail dolly,pantograph, other ms/pway scrap. all types of coach light cut up parts and other ms scrap with/without any attachments and all kinds of pway scrap during the course of delivery if any nfs, ci, ss and rails found in the lot should be returned to railways. available under the custody of cdms/rs ward/gsd/ubl .note:- bidder has to physically inspect the lot before bidding, cutting permitted by gas/manual. location: road no -05&06 gsd/ubl bin no- 516 &621. remarks-. delivery should start from one end. no pick and choose allowed
Tender For auction sale of depot miscellaneous scrap - ubl/gsd/b-0022/ electrical/26/b[pl no.98411019] condemned and un-serviceable electrical scrap consisting of reading light fittings, emergency light and fitting, cfl/fl fittings, air fittings, fl box type fittings, tail lamp fittings, sockets, socket control panel boards, tpic/dpic switch boxes, ballast, capacitors, avm, iron box, wooden switch board, suction apparatus with accessories, stabilizers, plb switches, tube light fittings, electrical parts covers, head light resistors, carbon brushes, holder and parts, revdel, head light dim resistor, different types of measuring/checking devices/instruments, tx rx coil, with cables, connection box, fuces, ignitors, hotoor for lc gate, head light switches, cab fans, grass/tree cutter, different types of lights and its fittings, connecting wires, ovpr,dsp, junction boxes, dfb, different types of switches, electrical equipment covers, smps parts, classification cover knife switch covers, plungers, 2*2lsed panel light fittings, terminals board assembly , rotary switches,& other parts, light mast fittings 400w , coolers, grinder, relay jack,timer relay,siemens relay and other realeated parts, street light, limit switches, mcb, pressure switches over voltage relay, wiper blades, ultrasonic flaw detector, gasoline run concrete machine, guard control switches, contactors, bracket holder junction boxes with wire attached, electronics spare parts, pcb board, transformer parts, motor releted parts led driver,door closer armature, alternators and starter parts ,street lights ,defferent types camera and spare parts radiator conteceetor or wing assembly head light , bulb fixing, cab fan, frames & buses and clamp, ivr, fuse alarm unit,solar panel coupler socket, other parts.wiper parts mh choke/copper blast ,ovpr 25k/4.5,and other electrical/electronical parts with or without ms/steel/aluminum/cables attached scrap. available under the custody of cdms/rs ward/gsd/ubl. note: bidder has to physically inspect the lot before bidding. location:- road no 02 block b bin no-022 gsd/ubl. remarks-. delivery should start from one end. no pick and choose allowed
Tender For auction sale of depot miscellaneous scrap - ubl/gsd/c-0033/ electrical/26/b [pl no.98411019] condemned and un- serviceable electrical scrap consisting of different types of bldc fans with/with out motors, bldc fans with/without nfs/ms attachment, , bldc fan covers, rc fans with /without nfs/ms attachment. and fan tc fan,air circulating fan, bldc fan other related scrap. available under the custody of cdms/rs ward/gsd/ubl. note: bidder has to physically inspect the lot before bidding.location: road no 02gsd/ubl bin no- 0033/ block-c. remarks-. delivery should start from one end. no pick and choose allowed
Tender For auction sale of depot miscellaneous scrap - pl no. 98414501] scrap condemned released and un-serviceable electrical scrap such as bldc carriage fans, field coil, wings blades, frames and fan heads with/without armatures including fan cover in broken/unbroken condition of sorts and sizes cl iii on as is where is condition. custody of cdms 07 ward [loc: new scrap yard bin no. 1102 behind 42 ward
Tender For providing and fixing of various electrical accessories at district and session court metro jodhpur - sitc of ip20 smd mid power led batten type integrated light fixture made from powder coated extruded aluminium housing with in built driver , system lumen efficacy 110 lm/watt output only at cw (5700k to 6500k) , internal surge protection of 4.0 kv with short & open circuit protection ,thd 10% , p. f. 0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000 k / 4000 k / 5700 k /6000 k/6500 k (as per ansi bin) as required., 1170mm(+/-10%) led batten with min. lumen output 2200 lm, sitc of ip-20 led recessed / surface mounted, round / square backlit & smd mid power led downlight with power coated die-cast aluminum housing with uv stabilized non yellowish diffuser with bis compliance 4.0 kv surge protected isolated driver, with short & open circuit protection input 320vac-48 hr protection, input 350vac-2 hr protection), having efficiency > 85% . system lumen efficacy of 110 lm / watt,at cw (5700k to 6500k) , thd 10 % , pf. 0.95, cri >80, life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000 k / 4000 k/ 5700 k /6000 k/6500 k (as per ansi bin) as required., recessed mounting, minimum lumen output 1950 lm, sitc of ip20, 2x2 led surface/ recessed mounting backlit & smd mid power type led light fixture not less than 35 mm housing depth made from crca sheet steel housing, high purity / transmissivity uv stabilized non -yellowish diffuser for uniform light distribution. operating voltage range 140-285 v, hv cutoff - lv cutoff should be 300-100v . high efficiency with 4 kv internal surge protection bis certified isolated driver having efficiency > 85% , with short & open circuit protection ( input 320vac-48 hoursprotection,input 350vac-2 hours protection) (integral with light fixture). system lumen efficacy of 120 lm/watt ,thd 10 % , p.f. 0.95,cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000 k / 4000 k / 5700 k /6000 k/6500 k (as per ansi bin) as required., recessed mounting, minimum lumen output 4320 lm, providing & fixing of bee star rated copper wounded with class of insulation f, double ball bearing capacitor start, aluminium body & aluminium blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 with down rod up to 30 cm with secondary support safety cable ( steel rope) , cotter pin, shackle kit with 3 x 1.5 sq.mm pvc insulated flexible copper conductor and making connection testing etc. as required., 1200 mm sweep bee 1 star rated (service value >=4.0 to 4.5 ), providing & fixing of ventilating fans capacitor start, copper wounded, single phase with pvc impeller, abs body, automatic openable louver shutter in existing opening including making connection, testing etc. as required., 200 mm sweep minimum air delivery 450 cum / hour, providing & fixing of 450 mm sweep oscillating type wall mounting / pedestal type fans with three speed, on and off position, sintered iron bush oil impregnated, with metal front and back 120 or more ribs guard; three no. aluminium blades, minimum air delivery 100 cum. / minute , minimum service value 1.11 cum./min/watt, noise level should be = 75 db, power consumption = 120 watts, motor protection through thermal overload protection device, including fixing with anchor bolts, making connection testing etc. as required., wall mounting type with adjustable vertical angle, supplying and laying fr pvc insulated & unsheathed flexible copper conductor of following nominal sizes with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from copper, stranding in acc. to is:8130/iec 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation pvc type a/c/d , flame retardant as per is 10810-53, better amperage rat
Tender For auction sale of rolling stock - pl no.98111061, condemned and over aged bg-8 wheeler icf coach 2 nos. with all available ferrous non-ferrous wooden fittings thereon but excluding the following rc items. 1}coach no. special repair cn 046245 (year built 2004), ds-8 no. 334714 dt 31.03.26, mechanical rc items as per sse/c&w/srr letter no.s-98/coach condemnation/rc items dt.04-11-2025 , coach no.srcn 046245 1] complete bogie arrangements including wheel sets 2 nos, 2] buffer plunger and casing 4 nos 3] cbc/screw coupling set [draw bar with hook, draft gear assembly] 2 set, 4] center pivot 2 nos. 5] bogie mounted brake cylinder 4 nos, 6] distributer valve complete full set 1 set, 7] wearing piece( bronze) and plate 4 nos each, 8] auxiliary reservoir 200 l. 1 no 9] main doors -4 nos 10] water tank-4 nos 11] cut off angle cock -4 nos 12] dirt collector- 2 nos 13] non return valve(fp)- 1 no, electrical rc items as per sse/electrical/srr letter no.elg/srr/6a dt.09.09.25. 1] bldc fan 400 mm-27 nos. 2]9w led lamp-26 nos. 3]2w lamp -8 nos 4]eml- 4 nos 5]mobile charger socket-18 nos. 6] regulator 4.5 kw- 1 no 7]vrla battery with tray-19 nos. 8] battery tray- 4 nos.9] rotary switch with panel board- 1 no 10] alternator to regulator wire ( copper ) -1 kg 11] one alternator(4.5 kw) & one set of axle pulley ( with bogie), 2} coach no. special repair cn 046213, (year built 2004) ds-8 no. 334715 dt 31.03.26, mechanical rc items as per sse/c&w/srr letter no.s-98/coach condemnation/rc items dt.04-11-2025 , coach no.srcn 046213 1] complete bogie arrangements including wheel sets 2 nos, 2] buffer plunger and casing 4 nos 3] cbc/screw coupling complete set [draw bar with hook, draft gear assembly] 2 set, 4] bogie mounted brake cylinders- 4 nos 5] distributer valve complete full set 1 set, 6] wearing piece( bronze) and plate 4 nos each, 7] auxiliary reservoir 200 l. 1 no 8] main doors -4 nos 9] water tank-4 nos 10] cut off angle cock -4 nos 11] dirt collector- 2 nos 12] non return valve(fp)- 1 no, electrical rc items as per sse/electrical/srr letter no.elg/srr/6a dt.25.07.25. 1] bldc fan 400 mm-27 nos. 2]9w led lamp-26 nos. 3]2w lamp -8 nos 4]5w westibal 2 nos 5]eml- 4 nos 6]mobile charger socket-18 nos. 7] regulator 4.5 kw- 1 no 8]vrla battery with tray-19 nos. 9] battery tray- 4 nos.10] rotary switch with panel board- 1 no 11] alternator to regulator wire ( copper ) -1 kg, custodian sse/ c&w/ shoranur.
Tender For auction sale of rolling stock - condemned bg 8 wheeler- ac coach with all available ferrous-non ferrous-wooden fittings thereon excluding rc items . mechanical rc items: 1) complete bogie and bolster assembly with all available fittings including brake gear items, 2) wheel set complete with axle,axle box and roller bearing assembly with pulley, 3) buffer plunger with buffer pads and buffer casings, 4)brass wearing piece and plate, 5)bio toilet complete set, 6)aluminium water tanks-if any, 7)distributor valve, 8) brake cylinders. electrical items: 1) alternator, 2) bldc fan, 3) vrla batteries .coach numbers- 1) special repair wgaccn 01914 = 1 coach,pl.no. 98111061 ds8 no: 232833 dt 21.06.2023 , location: tnpm marshalling yard, custodian: sse/c&w/tnpm, note: 1) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government.d and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government, 2)rate per number should be quoted,3)coach is in grounded condition . 4) screw coupling to be defaced before final delivery. 5)coach is in grounded condition (bogies and wheel sets are in removed condition).6) ac components, batteries, bio toilets are in removed condition. 7) remaining coach in ds8 already sold. 8) purchaser should take safety precaution while cutting/delivery of coache. 9) cutting permitted to loadable sizes only. 10) crane loading may be permitted.