Latest seal disc Tenders | Government seal disc Tenders

corporations/Associations/Others

CTN :45328177

05 Jun, 2026 62.00 Lacs

Kaushambi - Uttar Pradesh

Tender For supply of materials and erection for shifting of control room pannel at 33/ 11 kv sub station bharsawa distt. kaushambi under deposit scheme on turnkey basis under edc, kaushambi - name of work: supply, carriage & erection of materials for control room pannel shifting of shiffting of 33/11 kv s/s bharsawa distt. kaushambi, supply of centralised materials, 11 kv switch gear 600/300/5a 350 mva i/c, 11 kv switch gear 200/100/5a 350 mva o/g, 11 kv 3x300 mm2 xlpecable, 11 kv 3x120 mm2 xlpecable, 24 volt battery, 24 volt battery charger, pcc. 8.5 mtr. long for feeder, 11 kv tpmo switch with fixing clamp, 11 kv top channel, 11 kv dropper angle, earthing complete, stay set complete, 11 kv polymer pin insulator, 11 kv polymer disc insulator, 11 kv disc fiting, 33 kv control panel t/f, acsr weasel conductor, supply of de-centralised materials, 11 kv 3x120 mm2 xlpe cable jointing kit o/d & i/d, control cable 4x2.5 mm2, control cable 2x2.5 mm2, g.i. pipe 6 " dia, rubber matting, clamp with nut & bosts, earth wire clamp for pcc pole, stay clamp for pcc pole, top channel clamp pcc pole, dropper channel clamp pcc pole, g.i. strip 35x6 mm, carriage of following material, pcc pole 8.5 mtr. long., structure of la, 33kv isolator, 33 kv cts, single t/f control pannel, 33kv vcb,11 kv outgoing. incoming pannel, battery & battery charger and other associated accessiories etc. (availibility at concern store center of store division), erection work, installation of 33 kv single transformer control pannel 2 no., incoming 2 no. and 7 no. outgoing in the switchgear room and grouting the pannel by rag bolt using cement, sand mortar in ratio 1:3. work includs fitting of all accessories in all respect with complete connection of control cable with pannel. all material will be provided by the contractor except vcb and crp., construction of cable trenchs with top cover and laying of control cable for vcb, c.t. & t/f control pannel etc. as per direction of engineer. trenchs to be 12 wide and 9 deep. work includes digging, of trench, concreting of the foundation in the ratio 1:3:6 r.b. wall 9 wide with cement mortar 1:4 and plastering inside the trench in the ratio 1:3 and sand filling in the trench. all material will be provided by the contractor., earthing of 11 kv indoor equipments, switchgears as per resspo drawing. with g.i. strip of size 35x6 mm. g.i. strip fully welded at both ends and to be connected with earthmat,, erection of dp with pcc pole 8.5 mtr long with all accessaries and grouting of the pcc pole with cement, sand and brick ballast ratio 1:4:8 size 0.45x 0.45x 1.5 mtr deep under the ground as per drawing no. res-6.(cement, sand, brick, ballast shall be provided by the contractor.), installation of 24 volt battery and battery charger with cabinet in the switch gear room, by grouting base channel 100 x 50 x 6 x 1000mm. fixing of rag bolt., laying of 11 kv 3x300/3x185/ 3x120 sqmm. xlpe cable by digging 0.75 mtr. deep trench, putting layer of sand in the bottom, ramming it, laying of cable over it rmt and covering the cable from sides and top by laying bricks, finally covering the same by earth and levelling of the same, all the materials, except cable, will be pvovided by the contractor., fixing and termination of outdoor/ indoor heat shrinkable cable boxes of size 3 x300/3x185/3x120 sqmm. xlpe cable. boxes will be supplied by the contractor, sundries ( as per site requirement/emergency work), safe dismantling of 11 kv o/g pannel & received back to store, laying of weasel conductor with the help of aluminium roller by hanging three nos. on each support in a manner taking sufficient care to ensure safety of weasel conductor against rubbing on ground, precaution for safety of crops is also to be taken. the work includes jointing of conductor by providing jointing sleaves, stringing of conductor upto correct sag and binding of conductor with insulators on each support. all material shall be provided by contractor such as join

CTN :45332840

05 Jun, 2026 NA

Kamrup - Assam

Tender For tender for supply of deutz 30kva dg set spares - spin on oil filter 30 kva dg set model tcd , filter insert , valve piston , valve spring , venting line , spring band clip , rubber sleeve , intake nozzle , spring band clip , pipe clip , gasket , hexagon head screw , washer , exchange filter , lubricating oil line , o ring tc duetz , oil return line , clamping claw , torx screw , clip , flow control valve , injector valve , pressure sensor , sensor cable , fuel pump lp , repair kit cr 1600 , leak fuel pipe , hose line , fuel pipe tank to ws , fuel pipe return to tank , fuel pipe ws to fsp , spring band clip , hose , sping band clip , spring band clip , dust dischage valve , holder , service switch , cap , pressure sensor , hexagon head screw , locking screw , sealing ring , water pump , connection piece coolant pump , snap ring , hexagon head screw , thermostat housing , temperature sensor , spring band clip , elbow , hose , gasket , gasket , hose , rubber sleeve , sealing disc , compensator , hexagon head screw , sealing ring for injector , gasket , v belt pulley , deflection pulley , v ribbed belt , speed sensor , gear ring , piston ring set , cylinder head seal , gasket , screw , filler lock , gasket set

CTN :45291908

20 Jun, 2026 NA

Mathura - Uttar Pradesh

Tender For supply of common fuel sensor , cover thermostate housing , channel , starter relay , spark plug , hyd cyl , alternator

Central Government/Public Sector

CTN :45325964

03 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - scrap and unserviceable condemned mix m.s. coach cutting items & various types of similar items such as , body side door m.s., p.o.h. coaches realised corroded pieces,air brake,clamp,pipe pin,m.s. door of battery box ,m.s.ventilation door,foot plate,ice box,m.s. spring,m.s. angle,and m.s. lader with rubber coating,coach cuttings, coach doors , seat frames , bearth/seat frames, light head stock cuttings, train lighting fittings,, side lamps lamp hand signal, fittings, tail lamp fittings, cft/tl light fittings, ictp/ icfp empty swich boxes tail lamps, tube light fittings, tube light jali, fan blades, fan jali, fan guards fan ribs, fan rings, empty power pannels, signal platform, destination board, valley board, letter board,ms signal base, loc, inercooler, nut bolts and other hardwares, m s furniture.m s wheel stand,window grill, ms measuring cans, tins, racks, break pipes, silencer of tower wagon, dust bin, ms pipe and cut pcs. of ms pipes, rods, ms bars released from broken constructin, compressor spring, wire /coil springs, ms rope wire, pcs. of brake beam pipes, stands, m s ferrous light junk kachra related scrap i.e ms angles, chanels, flats pcs. of cable racks/laders ms brackets, dust bin stand, tin fuse box, fire extinguisher, empty glow sign boards, empty electrical pannel, ms stand, oven, earthing patti, empty cable tray, fly catcher, galvanized patra / sheet and their cut offs, cut pieces of ms cupboards, rack etc, plain/ corrugated / toughened sheets and its cut pcs. such as strips, patties, patties, patra, rings, coils, boxes, ms brake control cover, patra, angle, small springs, pins, wire, electric point, shunt signal unit and post. signal ladder , location box, earth electrode , signal post and base , signal unit, point roddings , junction route indicator and cut pieces in mijscellaneous, coil, collapsible doors and shutters and their parts/cut offs, grills , channel grills, compound /bridge jali with or without frame, ms fencing and their parts, fencing patties, angle pcs., frames,wire mesh, g.i./ms pipes and tubes , tubes and their cut pcs, damaged gi/ ms pipes/ rods/ tubes and their pcs. , ms/galvanised boxes, junction box, switch boxes, empty convertor, payary (steps), filters, rings, nut bolts, u clips, pipe pin, gate m/c dismentled, liquid container, damaged video boxes and their cut offs, crt cabinet, location boxes , jumper, jumper box,ground connections , basket steel, water cane/ material carring trolley,steel baskets, containers, trays, frames, stretchers, nets/ jali , released ground connection, halogen, panto pans, compressor spares, dust guard, air filters and filter covers, ms/gi duct and its parts,insulating armature of signal cable, hand lamps, side lamps, signal lamps petromax, hs lamp, clamps, signal post,signal platform, signal base, ms/ gi wire/ coil, funnels, wall protectors, boxes, iron bar pcs released from broken construction , desmantelled weighing machines parts/ covers etc. ms pipe with or without ci attachment, bins, plates, rings, spares/ parts /body of weighing machine , platform weighing machine and its parts, pressure switches and other switches , signal parts, location boxes,panel board,fuse box,mdb board,pedestial for lc gate and their cut parts and other ferrous miscellaneous scrap items with or without minor nf/ss/ wooden / rubber / rexine attachments of sorts and sizes, broken and damaged, u/s for rly. use, excluding items: rail and rail pcs., axles and axle pcs., wheel tyre and pcs., cam shafts, helical springs, bolster springs, buffer plungers, face plates, axle box housings/ casings, brake beams, fish plates, screw couplings/draw bar hooks, break beams, reservoir tanks, st sleepers and other various types of similar ms items etc. note: 1. hammering/ pressing/ cutting is permitted for easy loading only, 2. if found any non-ferrous item will not be delivered (qty approx)

Central Government/Public Sector

CTN :45325973

03 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - scrap and unserviceable condemned mix m.s. such as m.s. controll ring, coller housing and bolt, locking plate,end shild,belt tention device, rods,nut , elbow, t joint, check nut, coupling, bolts,wra spares, ms armature, tention vice,stay, hmv, amv, rod, suspention box,bearing distance plate, channel angel allean bolt,connecting rod,lower spring liner, crack shaft,shacko coupler parts, isolating cock, ms studs,hanger pin, ms pin and ,ms avm, shacu coupler, consisting valve, ms rear cover, various types of misc.mix m.s. parts with rubber,plastic, fiber , cotton etc sort and sizes.(qty approx) (note if found any non-ferrous item will not be delivered)

Central Government/Public Sector

CTN :45326075

05 Jun, 2026 NA

Kota - Rajasthan

Tender For auction sale of depot ferrous scrap - 98050126 scrap ferrous material consisting of various type of nut, bolt, rivets, peices of angle, channel, m.s. bracket, draft gear spring washer,m.s. liners,piston, door hinge, door hinge foot, small cut peices of tie bar, beater, clamp, pully side bearer housing, brake wear plate,side bearer housing top and bottom, knuckle pin, knuckle thrower, dog spike, g.i. ohe fitting, bk hanger lever, fish bolt, parts of ctrb bearing, liner, small p.way fittings, bk shoe key, s/pin, pu pad, axle box cover, and inner outer rings, m.s. pins, s/plate, peices of s.s and m.s. pipe, peices of huck bolt fresh cutting, push rod, cbc uncoupling rod, cbc lock and cbc components, safety loop, bk shoe head, released valve, cut peices of m s sheet, plates, buckles, ohe fitting, peices of ms rounds, equalizing lever, bridle bar, shackle stone, shackle, stricker casting wear plate, yoke pin, side bearer liner plate, hand brake wheel, suspension socker, g.i. nut bolt, tension device, main pull rod, cbc uncoupling rod, yoke pin, c.c. pad plate, m.s. round, bk shoe head, bk beam plate, reservoir tank patti, door catch, door check spring, annual repair supporting bracket, signal ground connection parts and other small wagon components and other ferrous items if any.

corporations/Associations/Others

CTN :45289690

02 Jun, 2026 5.00 Lacs

Thanjavur - Tamil Nadu

Tender For scrap sale of kumbakonam region - - alu. scraps(cond.aluminium inter cooler ), iron scraps (scrap of air suspenceses and other iron items), scrap of all types of broken batteries.25p mono 1.the registeretion certificate of firms with iron items) ministery of enveroment & forest,govt of india. 2.tamiladu polution control board certificate (tamilnadu unit holders)3.concern state polution control board certificate(other state unit holder) 4.no objection certificate obtained from concerned state polution control board(other state unit hold er)all the above "forms"should be enclosed along with the tender schedule,otherwise tender will be rejected.successful tender should produce the original certificate while on taking delivery without fail., scrap of all types of broken batteries.21p mono 1.the registeretion certificate of firms with iron items) ministery of enveroment & forest,govt of india. 2.tamiladu polution control board certificate (tamilnadu unit holders)3.concern state polution control board certificate(other state unit holder) 4.no objection certificate obtained from concerned state polution control board(other state unit hold er)all the above "forms"should be enclosed along with the tender schedule,otherwise tender will be rejected.successful tender should produce the original certificate while on taking delivery without fail., iron scrap of used driver seat cabin, scrap of radial tyres(used wornout & condemned 10.00x20.00 size-firms who have authorised by the spcbs asper used rubber/tyre waste under hazardous and others wasted rules 2016 can only participate in the auction cum tender), scrap of polythene bags,nylon bags,milk pockets covers and waste polythene pieces approx (0.480mt), scrap of tyre buffing dust., scrap of tyre buffing dust., condemned flap, scrap of cut pieces of tubes,flaps etc.,, scrap of all type of rubber and ruber beading approx=6.778 mt, scrap of vehicle units(streeing pump), iron scrap( dd units), iron scrap of trobochrger, iron scrap (fan clutch assembly), iron scrap of power streeing bed, iron scraps(all types of cylinder liners), iron scraps (all types of clutch disc with facings), scrap of brake shoes without linings, iron scrap (radiator top tank), iron scraps(ms bolt nut), iron scrap of connecting rod, iron scraps (weld mesh,bumper pieces,piston rings dust covers,fired filter elements,rusted 1/2 (or) full barrel /tin), iron scraps (bus body pieces), iron scraps (inside luggage carrier), old & condemned engine oil & diesel oil filters, scrap of empty 4lt paint tin, scrap of air filter, scrap of empty 4lt paint tin, scrap of empty 20lt paint tin, iron scraps (seat frames), iron scraps (ms angles,plates,flats,channel bits,all type of square tubes,rods,cross bars and brackets), iron scraps(clutch springs), aluminium scraps(old alu.cutting pieces), iron scraps(all types of hangers,shackles), iron scraps(all types of brake drums,clutch pressure plates,fly wheel,cover assy housing, bell housing etc and bench wise etc., scrap of tube with mouth, scrap of condemned light vehicle tyres including (car tyre-14 two wheeler tyre-1) total =15, iron scraps (all type of gear items), iron scraps(bearing,cones.balls,sleeves and bearings other damaged bearing etc.,), scrap of all type of rubber and rubber beading approx-1.020 mt, scrap of all types of broken batteries.25p mono 1.the registeretion certificate of firms with iron items) ministery of enveroment & forest,govt of india. 2.tamiladu polution control board certificate (tamilnadu unit holders)3.concern state polution control board certificate(other state unit holder) 4.no objection certificate obtained from concerned state polution control board(other state unit hold er)all the above "forms"should be enclosed along with the tender schedule,otherwise tender will be rejected.successful tender should produce the original certificate while on taking delivery without fail., old empty oil barrel(210 lt), old empty grease barrel with lid

State Government

CTN :45285975

28 May, 2026 1.21 Crore

Daman - Gujarat

Tender For providing and supplying modular furniture for newly constructed government school building at kachigam, nani daman. - civil works, providing supply and installation of corner sink table -size :-1100mm l x 1100mm d x 900mm hconstruction : floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an independent unit. cabinet should of square non-sharp edge construction. doors should be assembled with ss-304 hinge assembly. removable back panel should be provided to easily access the service lines running behind the cabinet benches. intermediate horizontal channels should be provided between door and drawer. toe-space of 90mm x 90mm is provided at front-bottom side of cabinet. levelers are provided for easy leveling of welded cabinet. shelf should be eight-bend panel with 20mm height. drawer tray should be of single piece construction. drawer should be well supported on lh and rh ball slide suspension system. steel door and drawer front should be of double wall construction with sound dampening material filled inside. doors should be easily removable and hinges should be easily replaceable. knee space panel should be in 22 gauge , cabinets are tested as per sefa 8m standard from a sefa approved lab and also tested as per en 14727 from a third party testing agency having nabl accreditation. dimensions : w= 900 mm, d = 900 mm, h = 875 mm configurations: 1 shutter - 1 nos moc: mscrca: is 513 (1994) thickness: lh/rh side panels, shutter front, bottom panel, top front, drawer separator, shelf, alignment channel is of 1.2mm thk. removable back panel, shutter cover, fr. rack strip, top cover panel is of 0.8mmthk. finish: powder coating pure epoxy, thickness 40-50 microns , followed with 9 tank pre treatment process the thickness of powder coat should be 45-50 microns, which passes the test of salt spray for 1000 hours. it should have a high temperature withstanding capacity with excellent electrical insulation properties.the rear portion of above accessories which is in contact with live metal should be made from thermo set material which will not melt on heating.handle : anodized aluminum recessed-type, ctc: 160.0mm lock: units have a locking facility with 180 and 10 lever cam lock mechanism (except for sink and corner unit) hinge: ss hinge screw: ss 304.shutter : should be of twin-type construction with sound dampening effect using profill.shutter cover should be equipped with bump on for sound dampening. base moulding should be made of pvc with corner clips. ball slide: 500mm length shutter should have provision of roller catch.pp sink,polypropylene molded sinks: made up of 5 mm thick high density and elastic poly propylene with good resistance to organic solvents. sink - bowl size to be a minimum of (l x w x d) 560 x 355 x 300 mm.faucet - 3-way type faucet as per approved makeworktop : jet black granite: it should be 19mm (+/- 2mm) thick jet black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. the overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. the backing material used is a neoprene mat of 6 mm thickness. (make as per selection of architect or selection of higher authority), providing supply and installation of corner table - size 1100mm l x 1100mm d x 900mm hconstruction: floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an indepe

State Government

CTN :45304161

30 Jun, 2026 NA

Parganas - West Bengal

Tender For internal electrical installation and wiring of newly constructed administrative building including supply of all materials at barasat 220kv s/s under barasat area office, wbsetcl as per schedule - supplying and fixing double door vertical tpn 160a mcb distribution board (8way), for mccb incomer with ip-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. pwd sch page d-11 item no 15. (legrand make) , supplying and fixing 415 v 125 a (4p) four pole mccb of breaking capacity 25ka/35ka with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing dbs / enclosure and necessary connection. pwd sch page d-08 item no 10. (legrand make), , supplying and fixing 240/415 v sp mcb (6-32)a (for out going) of breaking capacity 10ka & c characteristics on din rail of existing dbs and necessary connection. pwd sch page d-6 item no 07. (legrand make), , single phase lighting distribution, , supplying and fixing double-door (2+12 way) spn mcb distribution board with ip-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. pwd sch page d-9 item no, , supplying and fixing 240/415 v 32a dp mcb (incommer) of breaking capacity 10ka & c characteristics on din rail of existing dbs and necessary connection. pwd sch page d-6 item no 07., , supplying and fixing 240/415 v (6-32)a sp mcb (out going) of breaking capacity 10ka & c characteristics on din rail of existing dbs and necessary connection. pwd sch page d-6 item no 07., , point wiring, , distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'fr' pvc insulated & unsheathed single core stranded copper wire (brand approved by eic) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with modular type switch (brand approved by eic) fixed on modular gl switch board with top cover plate flushed in wall incl. mending good damages to original finish. pwd sch page e-20 item no 1. (iii) (average run 8 mtrs), , point wiring on board, , distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'fr' pvc insulated & unsheathed single core stranded copper wire (brand approved by eic) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 v 6a 5 pin plug point incl. s&f 240 v 6a 3 pin modular type plug socket & modular type switch (brand approved by eic) incl. s&f earth continuity wire, fixed on 4 module gl switch board with 3/4 module top cover plate flushed in wall incl. mending good damages to original finish. pwd sch page e-20 item no 3(i), on, , concealed cutting channel, , cutting channel of 31 mm x 31 mm size on masonry wall incl. s&f heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 swg gi wire fish wire incl. mending good damages to building works. pwd sch page e-2 item no 2a. 13 mm dia 3 mm thick polythene pipe without earth, , cutting channel of 31 mm x 31 mm size on masonry wall incl. s&f heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 swg gi wire fish wire incl. mending good damages to building works. pwd sch page e-2 item no 2a. 13 mm dia 3 mm thick polythene pipe without earth, , distribution wiring, , 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (5 sqmm) as ecc, pwd sch page e-9 item no 1. make: kei/mescab/finolex, , 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ecc, pwd sch page e-9, , 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sgmm) as ecce) 4x126/0.4 (16 sqmm)+2x80/0.4 (10 sgmm) as ecc, pwd sch page e-9, , 4x80/0.4 (10sqmm) + 2x84/0.3 (6 sqmm) as ecc, pwd sch page e-9, , air conditioner, , supply & fixing 240 v, 25a modula

Central Government/Public Sector

CTN :45203007

01 Jun, 2026 NA

Medak-T - Telangana

Tender For corrigendum : rate contract for rate contract for surgical items for 2 years - absorbant cotton 500gms net, alcoholic base hand sanitizer (propanol-1 & propanol-2) 500ml liq, bp apparatus regular (mercury model)make diamond, disopsable infusion set, disposable bedsheet with pillow cover forhospital use, disposable insulin syringe 1cc u-40 with needle (0.30x8mm), disposable needles 23g x 1", disposable syringe 2cc mis, ecg jelly 250/300ml, ecg 9108d paper z-fold paper, ecg electrodes disposable, elastic adhesive bandages 10cm x 4/6 mtrs, folleys catheter size16, folleys catheter size14, gauge cloth than packet 100cmsx 12m, i.v. cannula 20g, levenorgesterol harmone impregnated intra uterine device, nelaton catheter no.14fr, nelaton catheter no-16fr, paper plaster 2" pack of 6, plaster of paris bandage 10cm x 2.7mtr, plaster of paris bandage 15cm x 2.7mtr, pulse oximeter, sterile surgical latex gloves (powder free)size--7 1/2, nebulizer mask child, ryles tubes size14 mis, sterile transparent adhesive wound dressing with pad code 8526 10cmx12cm mis, tissue paper roll small(10cmsx40metres) for lab, gum astringent 15ml, x-ray films dental periapical 150 shtpackets, gc fuji ix 15 gms pkt (glass ionomer cement ix gc fuji 15gms ) , gc fuji ii - 15 gms pkt (gc fuji 2 (big), gc fuji varnish (dental varnish (gc fuji )), mouth mirrors (mouth mirrors (api /gdc)), lignocaine 1:80000 with 2% adrenaline 30 ml bottle, airotor handpieces (airotor hand piece push button type), dentsply x - smart endomotor (cordless hand piece), abdominal drainage kit, ecg paper roll 12 channel ecg recording paper210x20meters mis, haemorrhoide stappler 33mm, laproscopic disposable trocars 11mmbladeless, ortho-phthalaldehyde (alkalineglutaraldehyde)0.55%w/v 5 ltr, ot disinfectant spray, 250ml bot( ethanol ip10gm, 2-propenol 9gm,1-propenol 6gm), cidizyme 1lt (enzymatic detergent ), microgen d-256 alkyl dinethyl ammonium chloride 2.37% alkyl dodecyl dimithyl ammonium chloride 2.3%) ot disinfectant, sodium hypochloride 5% 5lt, instrument cleaner.dizep -1 lt (dhlorohexidine 7.5% & cetrimide 15%), polypropylene mesh-non absorbable synthetic06cm x 12cm, betadine scrub 7.5% 500ml, yankur suction set disposable, hydrogen peroxide 11 %+silver nitrate 0.01%w/v 1000ml, laproscopic disposable trocars 11mm bladeless, braided coated polyglactin 2-0 surgicalsuture "2317" box of 12 files), surgical suture black braided silk nw 5037,76cm, sensura mio convex base plate code 16921, coloplast paste 60gms code 2650, coloplast ostomy belt code 421, ostomy powder code 1907, brava tape code 12070, conform 2pc flange code 35500 & pouch code 25760 (set) 55mm, colostomy flange code 416423 & pouch code 413157 set 70mm, adhesive remover code 12010

Seal Disc Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors