Latest seal tape Tenders | Government seal tape Tenders

Central Government/Public Sector

CTN :45735815

28 Jul, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of ptfe threaded seal tape size 0.075 mm thickness, 12 mm width and 12 mtrs long in roll. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45730960

13 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply of sealing tape roll in black colour of size 0.3mm thick 5 inch x 20 meter long roll. oem/nabl tc & gc required. [ warranty period: 30 months after the date of delivery [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45732691

02 Jul, 2026 NA

Jhajjar - Haryana

Tender For providing and fixing motor connection plate 150x150/new plate/ at mps lakaria ,rewinding of clear water motor with including the cost of copper wire including credit of old material /10 hp/10 hp clear water motor / at mps lakaria ,providing and fixing of seal tape roll /seal taperoll/for 10 hp motor at mps lakaria

Central Government/Public Sector

CTN :45738718

10 Jul, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of p. t. f. e. thread seal tape as per specification bp22898 rev. 04. size-0.08 mm thk. x 12.5 mm width.

corporations/Associations/Others

CTN :45706614

15 Jul, 2026 NA

Bhadohi - Uttar Pradesh

Tender For supply of essential fumigation & safety equipment for accreditation under nspm-11 (mbr fumigation) - mlcl fumigation cover (standard), sand snake, methyl bromide gas, leak detector, halide leak detector, methyl bromide, vaporizer /, applicator assembly, methyl bromide gas, monitoring, equipment, gas distribution, pipes, gas sampling tubes, methyl bromide, cylinder applicator, methyl bromide, detector tubes, air sampling pump, full face respiratory, mask, chemical cartridge /, canister, self-contained, breathing apparatus, (scba), digital thermometer, portable axial fan, pocket calculator, measuring tape, stopwatch, adhesive sealing, tape, resuscitator, y/t connectors, chemical resistant, gloves, disposable chemical, resistant gloves, plastic rope, fire extinguisher, protective coverall, tool box kit, first aid kit, danger / warning, barricading tape, sheet holding clips

CTN :45700286

15 Jul, 2026 NA

Ernakulam - Kerala

Tender For procurment of diving items - o-ring 10-pack, screw 10-pack, o-ring, 6.07x1.78, pu, nm&oc, 10x336900182, o-ring tool kit, nm, spring, anti rust tube, cylinder ring assy., pressure gauge assembly for regulator unit, protective cap, suit hose, low volume visor for diving mask/face mask for aga divator, face mask for diving mask for ag divator, guide disc, diaphragm holder, guide pin, locking spring, lever, sealing sleeve, connection nipple, centre spindle, lever spring, cover, mask body, relief valve spring, stop ring, washer, spring, hand wheel cover, nipple, webbing buckle, buckle,fixed part, piston, orifice, spring, safety disc, safety plug 300 bar, handle section, spacing washer, level support, guide buishing, valve cone, quick coupling connection, plug, cover, hose gasket, gasket, washer, valve housing diving, diviator mkii lebel, holder, nut, locking ring, retaining ring, spacer, locking ring, cylinder ring, o ring, o-ring 12,42x1,78, 10-pack, o-ring 10-pack, o-ring 10-pack, o-ring 10-pack, o-ring 3, 1 x 1, 6, 10-pack, o-ring 5-pack, screw 10-pack, screw 10-pack, screw 10-pack, nut 10-pack, screw 10-pack, screw 10-pack, washer, nut 10-pack, sealing plate 25-pack, protective cap 3-pack, pin 10-pack, pin 10-pack, gland seal 10-pack, non-return valve disc 10-pack, high pressure hose, positive pressure attachment, sealing piston assy., washer 10-pack, o ring, shoulder strap assy,right, shoulder strap assy,left, valve stem assembly, spacer 10-pack, o ring, low volume visor, strap lovk, screw, diaphram, head harness, connection nipple, lifting spindle, piston, piston 5-pack, antifreezing cap 5-pack, high pressure hose short, discharge plug (din) controlled, locking strap, 1 pcs, pad, mk4 regulator assy, breathing bag, mouthpiece assembly, relief valve, high pressure hose assembly, bracket, strap, screw, buckle, male 40mm, locking clip, fomlube, neck strap, dosage regulator, warning indicator, bellow arm, safety pressure unit, valve holder, locking ring, o-ring 18, 77 x 1, 78, bellows assembly, dosage manometer assembly, o-ring 52, 0 x 3, 0, bellows weight, assembly, pressure gauge assy, canister lid gasket, screw assembly, lower, buckle holder with buckles, long, elastic string, 1700mm, sealing tape, screw, 1 pcs, screw, 1 pcs

CTN :45720703

30 Jul, 2026 2.00 Crore

Chhatarpur - Madhya Pradesh

Tender For inviting rates of different items for construction of diffrent type of work as per demand on cm help line or ward parsad or public - supply of handpump material 2026-27, excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with all lifts and lead up to 1000 m as per section-300 of the specifications.item no nvi-3.12, construction of embankment/sub-grade/earthen shoulders with material obtained from other sources, as per provisions of section 305 of the specifications, with approved materials/soil confirming to requirements given in table 301-1 of specifications including all lead and lifts, including cost of watering, compaction by vibratory roller/heavy pneumatic type roller etc. confirming to requirements given in table 301 2 of the specifications complete.item no nvi-3.12, construction of granular sub-base, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, including all lifts and lead complete in all respect as per section-400 of the specifications.by mix in place method item no nvi -4.1.1.1, construction of dry lean cement concrete sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 26.5mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 of the specifications, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with paver with electronic sensor/mechanical paver, compacting with 8-10 tonnes vibratory roller, finishing and curing and as per section 601 of specifications.item no nvi- 6.1.1, providing and laying cement concrete grade m-20 with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate / screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, including cutting of joints @ 4 to 5 m interval and filling it with hot applied bituminous sealant (without dowel bars) (max. thickness 20 cm).item no nvi-6.4, construction of dowel jointed, plain cement concrete pavement in m-30 grade concrete over a prepared sub base with 43 or higher grade cement, coarse and fine aggregate conforming to is:383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver with electronic sensor spreading the concrete by shovels, rakes compacted using needle, screed and plate vibrator and finished in a continuous operation including provision of contraction, expansion, and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, placing of dowel bar, tie rod admixtures as approved, curing compound, finishing to lines and grades as per approved drawings as per irc:15 and as per section-602 of the specifications complete excluding cost of steel in dowel bar and tie rod etc.item no nvi-6.2.1, earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom,dressing of sides,disposal of excavated earth including of all lift and lead upto 50m.disposed earth to be levelled and neatly dressed.all kinds of soil item no nii 2.6.1, demolishing cement concrete manually/by mechanical means including disposal of material with in 50 meters lead as per direction of engineer-in-charge.1:3:6 or richer mixitem no nii

CTN :45738189

16 Jul, 2026 9.68 Lacs

Shahjahanpur - Uttar Pradesh

Tender For supply of x 12 l and t make only , emery paper rough course universal carbondium make , emery paper fine carbondium make , emery tape 2 fine and rough carbondium make , emery cloth rough carbondium make , emery cloth fine carbondium make , emery paste medium course carbondium make 400gm pack , canvass coated rubber hose pipe dunlop 1 inch size , canvass coated rubber hose pipe dunlop 3 4 size , canvass coated rubber hose pipe dunlop 1 2 size , tublar gauge glass for boiler 20 x3 4 bishop adament , protection glass size 400 x 385 x 58 x 12mm thick bishop , fiber sleeve for above gauge glass temperature 600c pressure 20kg cm leader make , rubber cone for above gause glass temperature 600c pressure 20kg cm 3 4 , rubber plane washer 3 4 for gause glass , wire braded rubber coated flexible hose pipe both end male and female and with threded adjustable nut suitable size 3 8 x1100mm , wire braded rubber coated flexible hose pipe both end male and female and with threded adjustable nut suitable size 1 2 x1100mm , wire braded rubber coated flexible hose pipe both end male and female and with threded adjustable nut suitable size 3 4 x1100mm , wire braded rubber coated flexible hose pipe both end male and female and with threded adjustable nut suitable size 1 x1100mm , white lead shalimaar make only , lead ingot , red lead dewaldi make , brass shim 1 though 0 point 001 , brass shim 2 though 0 point 001 , brass shim 3 though 0 point 001 , brasso 200ml pack 100 ml , restoline 1 2kg pack , hold tide liquid black 500 ml pack , cotton waste super white grade 1a , graphited powder universal fine , araldite 180 gram pack , thread seal tape 3 4 champion make , breake liner 1 2 x4 ferrodo make , nylon rope size 1 standard quality garwarcy tough make , nylon rope size 5 8 standard quality garwarcy tough make , alcohal thermometer 0 to 110c red hicks make , sealing wire rope size 1 1 8 x 12 mtr loop size 450mm bearking load 20 ton with certificate , asb packing sleeve size 3 4 for boiler no 3 leader , indef make chain block p model cap 3 ton 3 mtr lift , indef make chain block p model cap 2 ton 3 mtr lift , extra lift for above chain , indef make chain block p model cap 1 ton 3 mtr lift , pvc cluster complete set , pvc spray nozzle for spray pond , pvc jet nozzle , pvc socket as per sample , main cock valve 1 2 , main cock valve 3 4 , c i main cock valve 1 , c i main cock valve 2 , ag5 grinder r w make , ag4 angle grinder r w make , ag7 angle grinder r w make , locktite make thread locker 250ml , locktite make bearing ratiner 250ml

CTN :45500237

30 Jun, 2026 NA

Kamrup - Assam

Tender For bid to ras supply of urinal bowls as per is 2556 (part 6) (q3) , steel butt hinges as per is 1341 (q3) , m - seal as per is 9197 (q3) , hydraulically regulated door closers conforming to is 3564 (q3) , bathroom water shower (v2) (q3) , polytetrafluoroethylene (ptfe) thread sealing tape (q4) , steel countersunk head wire nails conforming to is 723 (q3)

CTN :45704004

17 Jul, 2026 NA

Ernakulam - Kerala

Tender For supply of suction hose , dagger drill bit , laminating resin , hardner for araldite , araldite , carbon fabric , bagging film , porous release film , sealant tape , adhesive tape masking , nomax honeycomb , aluminium honeycomb core , needle file set , glass fabric , nylon roller , sanding belt grit , sanding paper grit , peel ply , apron , breather sealing

Seal Tape Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

corporations/Associations/Others