Latest sealing disc Tenders | Government sealing disc Tenders

Central Government / Public Sector

CTN :40330602

05 Jun, 2025 NA

Panipat - Haryana

Tender For corrigendum : providing of custom bid for services - rprc255150 rate contract for preventive maintenance and troubleshooting of abb make pac motor through its oem ms abb at pta for item no 10 abb make pac motor plc excitation for service charges for engineer

Central Government/Public Sector

CTN :40511851

12 Jun, 2025 NA

Hubli - Karnataka

Tender For supply of set of helical spring for wag-9hc, as per spec. no. clw/ms/3/spec/eldo bogie/004, alt-2 or latest. one set comprising of 04 items in 64 nos as under: 1) secondary spring (outer) as per drg no. ib 0 11-00842, item- 3 qty/set = 08 nos. 2) secondary spring (inner) as per drg no. ib 011-00842, item1 qty/s et = 08 nos. 3) primary spring (outer) as per drg no. ib 011-00843, item- 3 qty/set = 24 nos. 4) primary s pring (inner) as per drg no. ib 011-00843, item- 1 qty/set = 24 nos. [ warranty period: 30 months after t he date of delivery ]

Central Government/Public Sector

CTN :40530046

30 Jun, 2025 NA

Mumbai - Maharashtra

Tender For supply of m.s. bracket with protection cover for leveling valve of emu coaches to dr g. no. cee/cr/emu/mtn/et/rs/4/010. rev-r, item no. 3 only. material and specification as per drawing. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40529682

04 Jun, 2025 NA

Katni - Madhya Pradesh

Tender For paint enamel synthetic brushing finishing exterior black (packing in 20 ltrs new non retu rnable m.s. drum) "this is shelf life items and should be procured with staggered delivery period . supp lier to mention/print date of manufacturing on the item & item to be supplied within 60 days of manufa cture date." specn: is: 8662/2004 with additional requirement stipulated in icf specification no. icf/m/ d/spec 045 issue status 02 revision 03 except clause c3 of is: 8662/2004 the date of supply of the mat erial should b [ warranty period: 12 months after the date of delivery ]

Central Government/Public Sector

CTN :40522046

13 Jun, 2025 NA

Panipat - Haryana

Tender For supply of ms csk head screw fully threaded as per item sr no. 1 of buyer specification document , ms csk bolt with nut size: m12x50mm as per item sr. no. 2 of buyer specification document

Central Government/Public Sector

CTN :40025422

31 May, 2025 NA

Bangalore - Karnataka

Tender For bid to ras supply of supply of networking item - 1 inch hdpe pipe , supply of 12 core multimode outdoor armoured fiber , supply of 24 core multimode outdoor armoured fiber , supply of fully loaded liu pigtails , supply of jpu fully loaded , 24 port cat 6 utp jackpanel , supply of cat 6 single information outlets with backbox and shuttered face plate commscope , supply of cat 6 dual information outlets with backbox and shuttered face plate commscope , supply of cat 6 shield metal field keystone jack commscope amp molex systimax panduit , supply of cat 6 shield metal field rj45 plug commscope amp molex systimax panduit , supply of cat 6 utp patch cord 1 meter red green commscope amp molex systimax panduit , supply of cat 6 utp patch cord 2 meter red green commscope amp molex systimax panduit , supply of cat 6 utp patch cord 3 meter red green commscope amp molex systimax panduit , supply of modular concealed gi metal box , supply of 1 inch pvc flexible pipe with accessories , supply of 1.5 inch pvc flexible pipe with accessories , supply of 2 inch pvc flexible pipe with accessories , supply of cat 6 utp cale box 305 meter commscope amp molex systimax panduit , supply of 1 inch conduit pipe , supply of 1.5 inch conduit pipe , supply of 1 inch casing and cappinng , supply of 1.5 inch casing and cappinng , supply of 2 inch casing and cappinng , supply of 2 inch gi pipe , supply of 1 inch ms pipe , supply of 6 2 inch raceway casing white , supply of 4 2 inch pvc casing white , supply of 2 2 inch pvc casing white , supply of 9 u wall rack with pdu and accessories , supply of 15 u wall rack with pdu and accessories , supply of 27 u floor mounting rack 800x800 with pdu and accessories , ofc laying with hdpe pipe with digging soft soil and refilling 3 feet x 1 feet approx , ofc laying with hdpe pipe with clamping required material clamping nail etc .should be provided by the vendor 3 feet x 1 feet approx , ofc laying with hdpe pipe through hdd , consruction supply and installation of cement chambers with covers 2.5ftx2.5ftx2.5ft , supply and fixing of ofc route markers stone , installation of liu , splicing and testing of pigtails , installation of utp jack pannel , laying of utp cable per meter , groove cutting in walls floors and fixing pvc 1 1.5 inch pipes , groove cutting in walls floors and fixing of modular concealated gi metal box metal box covering them , termination of i o box and fixing of face plate , laying of 1in conduit pipe required material screw gatta bend collar junction box should be provided by the vendor , laying of 1.5in conduit pipe required material screw gatta bend collar junction box should be provided by the vendor , laying of 1 incasing and cappinng required material screw gatta bend collar junction box should be provided by the vendor , laying of 1.5in casing and capping required material screw gatta bend collar junction box should be provided by the vendor , laying of 2in casing and capping required material screw gatta bend collar junction box should be provided by the vendor , laying of 2in gi pipe required material screw gatta bend collar junction box should be provided by the vendor , laying of 6 2 in pvc casing required material screw gatta bend collar junction box should be provided by the vendor , laying of 4 2 in pvc casing required material screw gatta bend collar junction box should be provided by the vendor , laying of 2 2 in pvc casing required material screw gatta bend collar junction box should be provided by the vendor , ofc outdoor 12core splicing kit with necessary consumables and enclosure , ofc otdr test per core bid details/ 2 / 43 charges with report , network and server support deploying of 5 service engineers

CTN :40506950

18 Jun, 2025 NA

North 24 Paragana - West Bengal

Tender For purchase of spares - counter plate(f5-3-40) , rear valance (plate iv ai) , cover steer column (plate x a) , filter fuel tank (plate iii c) , liner bearing(b4-3-2 by 03) , seal window rh side (plate iv q) , mat rubber (plate viii e) , horn 12v (plate xxiv b) , adaptor elbow (plate xiv d) , pipe brake rightside 80d (plate xxiii c) , base pre cleaner (plate-xxvi b) , adaptor tee (plate xiv b) , pump seal kit (plate xiv b) , pivot block (plate iv u) , gaiter park brake lever (plate iv a) , mounting cab upper blue a post(plate- iv b) , mounting cab upper green b-post(plate-iv-b) , seal fuse box cover (plate iv ae) , pin slew lock (plate vi a) , bracket mounting fire extinguisher (plate vii e) , switch 12 v (plate ix a) , lever loader control assy (plate x b) , lever loader control 3 spoon , spring (plate xi a) , hose top l h by r h hydra (jcb super plate xiii , hose high pressure (plate xiii ab) , setscrew (plate xvi g) , breather (jcb super plate xix f) , bearing(plate-f5-1-20 by 32) , gasket valve block (ctlg 3dx f5-5-10) , brg needle thrust(plate-f5-1-30 by 9) , pipe brake leftside 80d (plate xxiii c) , bearing liner (plate xxxi l) , lever , bottom gear shift , bearing , radio antenna (plate iv f) , guard hose (plate iii d) , hose hybrid rh outer (plate iii f) , hose hybrid lh outer (plate iii f) , speaker (plate iv f) , retainer top (plate iv am) , retainer side (plate iv am) , switch hand break by brake lamp switch open(c1-16-1) , lever excavator control left hand x pattern , loader excavator control right hand x pattern , adapter filtered m oblique m (plate xv d) , setscrew (plate xvi n) , bolt 1 inch unf x 8 inch long torque 607n-m (jcb super pla , plate brake friction (plate xix c) , ring backup (jcb super plate xix d) , seal astics male assy , brake hose 1 by 4 x 580m (plate xxiii c) , fuel line tank to water separator(plate xxx a) , ball bearing , hose hybrid rh inner (plate iii f) , clamping ring (plate iv y) , cover inner fender rh (plate iv z) , bearing trunnion ram pivot (plate vi y) , pin spring 8 mm clevis (plate x b) , adaptor suction (plate xiv b) , combi seal , disc spring , clip hose (plate xxviii b) , valve non return assy (plate xxx a) , pivot pin , mounting cab lower red b-post(plate-iv) , grommet 22.2mm hole dia by 39.7mm 00 , pivot pin , hose wa feed pipe (jcb super plate xiii d) , adaptor , seal(plate-f1-6-10) , ring backup (jcb super plate xix d) , bearing , pin pivot 44.45 by 44.35x184(plate xxxi f) , hose bsp hp 650mm (jcb super plate xiii o) , hose 1 by 4 bsp 1270mm (plate xiii y) , hose lp 2400 mm (plate xxviii d) , reservoir brake (plate xxiii a) , catch side window lockback (jcb 3dx super page-89) , liner brg 70 mmx60mmx62mm long , pivot pin (ispl sl no 501) , filter breather cap(jcb super iii d-2) , switch panel (plate ix a) , retainer hose (plate iii aa) , cover excavator control lever (plate iv y) , bulk head seal (plate iv am) , lock boom (plate vi v) , brake hose 1 by 4x 760m (plate xxiii c) , lock grille (plate iii q) , pin pivot back(item no-621) , spool adapter solenoid (plate xxi c) , shaft selector (plate xxi c) , brg needle roller , bracket (plate xxx a) , hose 1300 mm (plate xxx b) , plate shim , clutch 1.2mm a by r (jcb super plate xx , sensor vacuum 80m bar (plate xxiv b) , pin pivot union(sl-2240) , side cutter(ms sl-21) , side cutter (plate xxxi v) , bracket engine mounting lh (plate iii n) , gas strut , 700m (plate iii b) , pin pivot (plate iii g) , hose 600 mm (plate xiv d) , pivot pin , hose 06 bsp lp 105 (plate iv a) , pin pivot (plate v j) , switch panel (plate ix a) , panel 12v 2 position (plate ix b) , hose(plate-e1-13-1) , gear planet , brake plate coupling , bearing tapper roller(f5-1-20) , bearing tapper roller(f5-1-20) , pipe pre cleaner (plate xxvi a) , hose (plate xxvi a) , harness grid heater (plate xxvii a) , hose water separator (plate xxx a) , pin pivot (plate xxxi b) , piston oil , console front (plate iv aa) , bearing 50.94x55.9x40 long (plate v i) , bearing tapper

CTN :40253347

31 May, 2025 NA

North 24 Paragana - West Bengal

Tender For bid to ras purchase of spares - liner bearing(ispl sl no-488) , grommet(plate-b1-6-1 20) , shim 0.5mm(ms-146) (plate no-g1-3-1 , sl no-20) , grommet(plate no-c1-2-1 , sl no-14) , shim 1.5mm(ms-147)( plate no-g1-3-1 , sl no-21) , o ring , grease nipple 1 by 8 inch bsp , str (os-678)) , spacer block(plate -b2-18-1) , o ring(plate no-e3-7-1 , sl no-4) , cap , seal(b4-1-1 by 05) , o ring seal (ispl1207 & ctlg-e3-7-1 , sl-05) , washer 3 by 4 inch bsp(os-1053) , pin hose retainer(plate-b1-17-1) , bulb(plate-viii h-10) , hose clamp , screw cap (item no-1750) , bush hinge , snap ring , 20 amp fuse(plate- ix e-7) , grommet (plate-d2-1-4) , stop (plate no- b2-1-4 , sl no-29) , 15 amp fuse(plate-ix e-8) , spacer , d e spnr (12mm x 13mm) , o ring 274 idx3.5 cross sec dia , bulb(plate-viii h-11) , seal fit tool(price list sl-25412) , spacer , socket (1 by 2 inch a oblique f x 1 by 2 inch drive) , rivet nut m10 , knob excavator c w switch as supplied(d1-8-35) , seal ring turquoise , door stay , wheel nut , thrust washer(ms sl no-426) , worm drive clip 70mm longclip jubilee , protector (ispl plate b2-6-9) , stop cable(plate d3-1-5) , pad wear 6mm upper colour red , extension bar (1 by 2 inch sq drive) , sensor , water temp , liner bearing , bolt gr5 , 3 by 8 inch unf x 3 by 4 inch long , temp sensor unit(isplsl-620) , gaiter excavator lever , switch oil pressure engine(c1-16-1) , mounting rubber , mounting rubber(n1-8-1) , bearing(plate-d1-1-2) , lower door glass(ms sl-46) , pad wear 7mm upper colour blue , hose bend , gasket , plug , socket (17mm) , clevis pin , ring seal , bowl , hammer engineers ball pane 200 grm with handle , switch water temp , pipe assy( plate no-a1-7-2 , sl no- 23) , buzzer(plate-c3-2-3) , pin hinge cab door (item no-306) , switch oil temperature , adopter 5 by 8 inch bsp x 5 by 8 inch bsp , socket 1.1 by 8 inch a oblique f(b5-2-1) , tooth , cover pre cleaner (plate-xxvi b) , pree paper filter , adaptor m oblique n 1 by 2 inch x 5 by 8 inch bsp , tooth (plate-a2-1-1) , collar , bearing linner , glass front quarter light left hand clear , clamp plate , glass front quarter light right hand clear(plate-b , flasher hazzered , bearing , hammer (10lb)(ispl sl-553) , v belt (cogged) 1450mm long (497tc p-110) , hose (e1-10-2) , tube , ferrule for push rods , catch side window lockback (jcb 3dx super page-89) , side cutter double flange , nut lock(ms sl-540) , tail lamp rh oblique light rear combination rh , bucket dipper pivot pin(plate-vi s-1) , adaptor air filling (3dx b5-2-4(tool kit)) , side cutter double flange , element air safety(p3-3-2) , air filter inner , cable throtal inner , outer(d2-1-4) , fan belt (jcb super list of carried spares) , glass six light l h side , side window glass(ms sl-55) , glass six light right side , gasket turbo outlet (plate- xxva) , hose(e1-9-2) , glass six light rear , hose(e1-9-2) , element air main(plate-p3-3-2) , glass six light right rear side , support bracket(price list 2015) , piston bearing(e4-1-5) , hose for wat outlet m feld , piston bearing , hose(e1-1-1) , piston bearing (ms sl-328) , shim kit(ispl sl-1556) , ball bearing , l h cab door upper window glazing(sl-298) , s e spner 60mm , piston bearing , hose(plate-a1-7-2) , wind screen(plate-b2-3-5) , seal , hose , seal kit for dipper ram , swivel hook , adaptor(plate-xxxi aa-29) , bush(plate-f1-6-1) , t handle 1 inch sq drive(be220g fig no-8000) , combination switch (plate c3-2-3 p-90) , seal kit bomm ram , master cyl(ispl sl-1663) , adaptor(plate-xxxi aa-25) , water pump abi(price list sl-9615) , joint knuckle swivel (3dx f1-6-10) , bearing extractor (price list sl-25409) , propshaft rear (ctlg 3dx f3-2-1) , impulse extractor for hub bearing seal(smt sl-06) , bush (ms sl no 11) , set of seal , ram as suppli crowd (plate xvi m) , turbocharger(ispl 4r1040t sl-1 p-78) , bucket cylinder b h , backhoe bucket 0.30 cum (plate xxxi d) , boom assy , hyd pump (ispl plate f08) , repair kit (e jcb e2-2-1) , extended dipper valve (plate x

CTN :40520967

12 Jun, 2025 NA

Panipat - Haryana

Tender For supply of steel is2062 gr e250a or br or b0 isa 50x50x6 mm as per soqr item no 1 , steel is2062 gr.e250a or br or b0 isa 65x65x6 mm as per soqr item no 2 , steel is2062 gr.e250a or br or b0 isa 90x90x6 mm as per soqr item no 3 , steel is2062 gr.e250a or br or b0 isa 75x75x8 mm as per soqr item no 4 , steel is2062 gr.e250a or br or b0 ismc 100 as per soqr item no 5 , steel is2062 gr.e250a or br or b0 ismc 200 as per soqr item no 6 , steel is2062 gr.e250a or br or b0 ismc 250 as per soqr item no 7 , steel is2062 gr.e250a or br or b0 ismc 300 as per soqr item no 8 , steel is2062 gr.e250a or br or b0 ismb 300 as per soqr item no 9 , steel is2062 gr.e250a or br or b0 ismb 250 as per soqr item no 10 , steel is2062 gr.e250a or br or b0 ms plate 12 mm thick as per soqr item no 11 , hollow section of gr. is4923 gr.yst310 shs 150x150x6 mm as per soqr item no 12 , hollow section of gr. is4923 gr.yst310 shs 100x100x6 mm as per soqr item no 13

CTN :40469270

14 Jun, 2025 NA

North 24 Paragana - West Bengal

Tender For purchase of spares - rock breaker with chisel and moil(ref-xxxiac-1) , head front(ref no-a3-5-3) , turbo charger 1 h1 rh b-6(plate-z1 oblique 1) , cap screw (ms sl-245) , joint for del volute , bulb 12v 10w (feston) , wrench bar 6 , wrench bar 08 , by pass hose(ms-173) , o ring , adaptor , de spanner 16x17(jcb super, plate-v11d) , inner cable(d3-1-5) , bolt(plate xxxi c) , plate friction clutch (ctlg 3dx e5-1-30) , joint (for rocker cover)ms-162) , male cone blacking plug set (smt sl-09) , tooth point (ispl plate-k04) , bush (cat 3dx a2-1-1) , triple lip seal (f5-1-20) , wiper assy front(item no -955) , push rod(r2) , hose top(p4-4-2) , o ring for cyl liner(ms-157) , hose(e3-13-1) , plug water jacket(r2) , hose air induction , seal kit, steer ram(ms-464) , pin pivot(plate-a1-7-2) , hose 1 by 4 inch x 1 by 4 inch bspx1200 long , hose(plate-e1-13-1) , hose(e1-1-2) , tooth (ispl plate-i03) , door handle lh(plate -iv n-9) , joint, liner to head, 0.4mm thk , hose (e1-8-11) , rear frame hose retainer(ispl-938) , hose , fan face level 12v (c1-17-1) , throttle cable assembly (jcb super plate xi a) , hose 08 bsp hp 1910mm a , hose(plate-e1-9-15) , hose (1 by 2 inch bspx1 by 2 inch bspx1130mm long , hose 4 wd rh , gasket cyl head(plate-xxxiii a) , glass tinted left side(plate iv r-4, 379) , hose l h , hose(3dx ctlg e1-9-2) , window tinted glass rh(jcb super,366) , hose(sl-36922, price list) , hose , dowel(r2) , hydraulic hose (ispl plate-f01) , adjuster auto tensioner(plate-xxxviii a1) , nozzle(ms sl-574) , parkbrake caliper g.a (ispl sl-1691) , pin pivet 600mm wind jaw (ref-xxxif) , track rod end gaiter(f1-30-10 by 1a) , hose(plate-e1-9-12) , valve inlet , tool chisel(sl no-2351) , cap filter , universal driveshaft , pressure gauge kit with snap(smt sl-01) , cyl head sub assy , joint knukle swivel(f1-6-10) , grommet , self lubricating brg , leak off hose(ms-152)( plate no- p4-4-2, sl no-9) , nut castle m 20x1.5(f1-30-10) , spring brake shoe(ms-188) , strip 1260 mm long (jcb ms sl no 40) , gasket(ms sl-31) , interrior light (ispl-585) , plate door catch , oil seal 115x140x16 cr make(4r1040t ispl -oil seal , bearing bush ce(ms-189) , rubber hose(plate-l1-4-10) , bolt for con. rod(ms sl-545) , seal (r1 spare) , wiper blade(ms-79) , cap radiator , hose bottom radiator(p4-4-2) , oil ring , fuel filter element pre i 1 (mico no.1457431003) , sealing bush(ms-185) , pin pivot , fuel filter(plate-xxxviig, sl no-2538) , radiator assembly turbo , grommet cable harness( plate no- d1-21-2, sl no-17 , bulb 5 w , 10 amps fuse , de spanner 10x12 mm(plate-vii d -27) , wear pad(ms-27) , ring spanner 18x19mm(ispl sl-563) , screw driver 10 inch by 9 , o ring , female cone blanking plug set (smt sl-08) , friction plate(f5-3-40) , filter fuel secondry(amendment no1,ms-199, jcb 3dx , pipe fuel(plate-t, 44tc) , oil filter (ms sl-386) , ring sealing for bowl(ms sl-563) , gaiter hand brake , hose pipe for breather(ms sl-555) , hose - 4wd(ms-106) , hose(ms-97) , pivet pin alloy steel (ms sl-17) , lh lock assy(ms sl-49) , piston seal assy , working light(ms sl-94) , filter pre cleaner assy , pivot pin( ms sl no-10) , brush set(ms-194) , element , universel joint , piston seal(e4-1-6) , field coil assy(ms-195) , hydraulic hose (ms sl no 1789) , brake pad ga (ispl sl no-1695) , flange spanner for locking pinion mut(smt sl-04) , valve exhaust , silencer exhaust turbo(ms sl no--148,apr-2015) , solenoid switch , excavator valve (ispl plate-e3-6-1) , filter element, hyd oil(ispl plate-f06) , starter motor (item no- 76) (jcb super plate xx , fip 68 kw bs ii(item no-54) , arm loader short(ref no-b3-1-1) , axle arm & wheel hub assy (plate- xixb) , turbocharger 68 kw(ac)t3(plate- xxxix a-2544)

Sealing Disc Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector