Get complete information related to latest Sealing Material Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Sealing Material Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Sealing Material Tenders.
Tender For - rj-19-07/ml/ jhalrapatan/ 2026-27 - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, construction of missing link road from village nipaniya to kherana, total, construction of embankment with material obtained from borrow pits construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300-1 and 300-2 with a lead upto 50 m as per morth specification clause 305.3, construction of missing link road from village nipaniya to kherana, total, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, construction of missing link road from village nipaniya to kherana, total, granular sub-base with close graded material (table:- 400-1) plant mix method providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per table 400-1,400-2 or any other course material as per design mix, as per cbr in sub base course including premixing the material at omc in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader f.e loader on a prepared base and compacting with vibratory roller to achieve desired density (as per i.s.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete.[morth specification : clause 401]. by mechanical means with a lead of 1 km. for grading-iii material, construction of missing link road from village nipaniya to kherana, total, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406 by mechanical means with a lead of 1 km., construction of missing link road from village nipaniya to kherana, total, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) using truck mounted sprayer including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, construction of missing link road from village nipaniya to kherana, total, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., construction of missing link road from village nipaniya to kherana, total, 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type
Tender For - rj-19-08/ml/ jhalrapatan/ 2026-27 - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, construction of missing link road from village dola to padiyarkhedi, total, construction of embankment with material obtained from borrow pits construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300-1 and 300-2 with a lead upto 50 m as per morth specification clause 305.3, construction of missing link road from village dola to padiyarkhedi, total, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, construction of missing link road from village dola to padiyarkhedi, total, granular sub-base with close graded material (table:- 400-1) plant mix method providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per table 400-1,400-2 or any other course material as per design mix, as per cbr in sub base course including premixing the material at omc in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader f.e loader on a prepared base and compacting with vibratory roller to achieve desired density (as per i.s.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete.[morth specification : clause 401]. by mechanical means with a lead of 1 km. for grading-iii material, construction of missing link road from village dola to padiyarkhedi, total, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406 by mechanical means with a lead of 1 km., construction of missing link road from village dola to padiyarkhedi, total, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) using truck mounted sprayer including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, construction of missing link road from village dola to padiyarkhedi, total, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., construction of missing link road from village dola to padiyarkhedi, total, 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of eith
Tender For - rj-19-10/ml/ jhalrapatan/ 2026-27 - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, construction of missing link road from village mathaniya to ruaprel, total, construction of embankment with material obtained from borrow pits construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300-1 and 300-2 with a lead upto 50 m as per morth specification clause 305.3, construction of missing link road from village mathaniya to ruaprel, total, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, construction of missing link road from village mathaniya to ruaprel, total, granular sub-base with close graded material (table:- 400-1) plant mix method providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per table 400-1,400-2 or any other course material as per design mix, as per cbr in sub base course including premixing the material at omc in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader f.e loader on a prepared base and compacting with vibratory roller to achieve desired density (as per i.s.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete.[morth specification : clause 401]. by mechanical means with a lead of 1 km. for grading-iii material, construction of missing link road from village mathaniya to ruaprel, total, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406 by mechanical means with a lead of 1 km., construction of missing link road from village mathaniya to ruaprel, total, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) using truck mounted sprayer including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, construction of missing link road from village mathaniya to ruaprel, total, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., construction of missing link road from village mathaniya to ruaprel, total, 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of eith
Tender For tender for supply of transmitters - dpt , standard , hart , range -10000 mmwc to 10000 mmwc , diaphragm gold plated on ss316l , as per data sheet mrpl inst dpt 003. , dpt , standard , hart , range -1000 mmwc to 1000 mmwc , diaphragm gold plated on ss316l , as per data sheet mrpl inst dpt 004. , high pressure dp trans , ty hart , gold plated diaphragm , rang 0 to -10000mmwc , as per specification sheet mrpl dpt 006 , ff diffrential pressure transmitter range -10000 to 10000 mmwc , as per spec sheet mrpl inst dpt 012 , ff diffrential pressure transmitter range -1000 to 1000 mmwc , as per spec sheet mrpl inst dpt 013 , dpt , standered , ff , range -50000 mmwc to 50000 mmwc , diaphragm gold plated on ss316l , as per data sheet mrpl inst dpt 014. , diff. pressure transmitter , type-remote seal , range 0-10000mmwc , flange rating 3 inch 600 , as per spec sheet mrpl rsdp 001 , diff. pressure transmitter , type-remote seal , range 0-10000mmwc , flange rating 3 inch 150 , mrpl rsdp 002 , dpt , remote seal , hart , range 0-50000 mmwc , diaphragm ss316l , flange rating 3 inch 300 , as per data sheet mrpl inst rsdp 004. , dpt , remote seal , hart , range 0-10000 mmwc , diaphragm ss316l , flange rating 3 inch 300 , as per data -r sheet mrpl inst rsdp 003. , dpt , flush mounted diaphragm , hart , range 0-1000 mmwc , diaphragm ss316l , flange rating 3 inch 150 , as per data sheet mrpl inst rsdp 014. , dpt , flush mounted diaphragm , hart , range 0-25000 mmwc , diaphragm ss316l , flange rating 3 inch 150 , as per data sheet mrpl inst rsdp 015. , hart pressure transmitter , range 0-35kg cm2 , as per specification sheet mrpl pt 001 , high pressure trans , ty hart , gold plated diaphragm , rang 0 to 320 kg cm2 , as per specification sheet mrpl pt 006 , hart pressure transmitter , range 0-320 kg cm2 , as per specification sheet mrpl pt 005. , pressure transmitter , range 0-35 kg cm2 , direct mounted 1.5 inch 300 as per spec mprl inst rspt 009 , dpt , standard , hart , range -10000 mmwc to 10000 mmwc , diaphragm hastelloy c-276 , as per data sheet mrpl inst dpt 005. , pt , remote seal , hart , range 0-35 kg cm2 , diaphragm ss316l , flange rating 2 inch 300 , as per data sheet mrpl inst rspt 001. , pt , remote seal , hart , range 0-140 kg cm2 , diaphragm ss316l , flange rating 2 inch 600 , as per data sheet mrpl inst rspt 002. , pt , remote seal , hart , range 0-35 kg cm2 , diaphragm ss316l , flange rating 2 inch 150 , as per data sheet mrpl inst rspt 003. , pt , remote seal , hart , range 0-140 kg cm2 , diaphragm ss316l , flange rating 2 inch 300 , as per data sheet mrpl inst rspt 004. , pt , remote seal , ff , range 0- 35 kg cm2 , diaphragm ss316l , as per data sheet mrpl inst rspt 006. , wireless temperature transmitter as per spec mrpl inst wtt 001 , wireless dpt , flush mounted diaphragm , hart , range 0-25000 mmwc , diaphragm ss316l , flange rating 3 inch 150 , as per data sheet mrpl inst wrs 001. , wireless dp transmitter , dp range -10160 mmwc , as per spec. , wireless pressure transmitter , range 0-40 kg cm2 g , as per spec. , wireless gateway for communication with dcs pc , as per spec. , wireless hart adapter , ff , dpt , flush mounted diaphragm , range 0-25000 mmwc , diaphragm ss316l , flange rating 3 inch 150 , as per data sheet mrpl inst rsdp 017. , hart dp transmitter , range -10000mmwc to 10000 mmwc as per specification sheet mrpl dpt 001. , hart dp transmitter , range -1000mmwc to 1000 mmwc as per specification sheet mrpl dpt 002. , dpt , high static pressure , hart , range -10000 mmwc to 10000 mmwc , diaphragm ss316l , as per data sheet mrpl inst dpt 007. , dpt , high static pressure , hart , range -50000 mmwc to 50000 mmwc , diaphragm ss316l , as per data sheet mrpl inst dpt 009. , dpt , standard , hart , range -100 mmwc to 100 mmwc , diaphragm ss316l , as per data sheet mrpl inst dpt 010 , dp transmitter , as per spec , mrpl inst dpt 015 , dpt , remote seal , hart , range 0-50000 mmwc , diaphragm ss316l , flange rating 1.5 inch
Tender For supply of sealingmaterials (sealing cord) for metallic threaded joints in contact with 1st,2nd and 3rd family gases and hot water non-hardening jointing compounds conforming to bs specification en 751-2- 1997 class arp compound with dvgw/csa/nsf/ansi-61/ as-nzs-4020 approval. material required in packing of 150 meters spool. make - loctite 55 or similar in 160 mtrs pack. [ warranty period: 30 months after the date of delivery ] ]
Tender For corrigendum : supply of coconut oil soap noodles triclosan ethyl lactate zinc pca salicylicacid manuka concentrate willow extract tea tree oil , d ifa re 16 chlorhexidine gluconate 4 containing detergent with bathing sponge for preoperative bathing , d ifa re 16 diclofenec sodium10 mg methyl salicylate 150 mg menthol 50 mg absolute alcohol 50 mg tube 15 gm , d ifa re 16 gel diclofenac sodium methyl salicylate menthol absolute alcohol in nano emulsion , d ifa re 16 cross linked sodium hyaluronic acid 1 2 dot 9 mda 22mg ml 4 ml pfs , d ifa re 16 undernatured collagen peptide type ii magnesium bisglysinate l citrulline vit e , d ifa re 16 diclofenac diethylamine 4 and absolute alcohol topical solution non aqueous qps 15 ml , d ifa re 16 antibiotic impregnable bone graft pellets , d ifa re 16 centhaquine citrate lyophilized 1 dot 0 mg vial inj , d ifa re 16 sugammadex injection 100mg ml vial of 5ml , d ifa re 16 b hex ring , d ifa re 16 human chorionic gonadotrophin 5000iu inj , d ifa re 16 flurbiprofen 0 dot 1 with bak 0 dot 004 polyvinyl alcohol 1 dot 4 bott of 10ml , d ifa re 16 brimonidine tartrate 0 dot 1 with cmc soc in 5ml bott , d ifa re 16 carboxymethycellulose 0 dot 5 with soc glycerine erythritol levocarnitine in 10ml pack optive , d ifa re 16 brimonidine tartrate 0 dot 2 timolol 0 dot 5 with with bak ii pack of 5ml , d ifa re 16 bmatoprost 0 dot 3 timolol 0 dot 5 with bak 0 dot 005 sodium chloride dibasic sodium phosphate citric acidin 3ml pack , d ifa re 16 2 dot 7 3 dot 0 mm 2 dot 4 mm headless variable pitch threaded compression screw titanium 9 to 50 mm length dot it should be usfda , d ifa re 16 3 dot 5mm lcp extra articular distal humerus plate right and left 6 7 8 10 12 holes with 7 locking and 2 cortical screws dot implants should be usfda , d ifa re 16 3 dot 5mm distal tibial medial locking plates with at least 6 holes in head and 4567891011 12 holes for shaft with 8 , d ifa re 16 6 hole 3 dot 5 mm titanium dcp plate with 14 mmcortical screw 10 nos , d ifa re 16 7 hole 3 dot 5 mm titanium dcp plate with 16 mm cortical screw 10 nos , d ifa re 16 8 hole 3 dot 5 mm titanium dcp plate with 18 mm cortical screw 10 nos , d ifa re 16 lcp proximal radial plates 2 dot 4 2 dot 7 mm for radial head rim plates and neck plates right left side 2 4 holes in head and , d ifa re 16 tibial nailing system expert type titanium consisting of expert tibial nail 1 nos locking bolt 5 nos end cap 1 nos size 8 , d ifa re 16 posterior stabilised fixed bearing knee with assymetric tibia dot cobalt chromium femoral component matching polyethylene fixed , d ifa re 16 primary total knee replacement prosthesis high flexion oxinium consisting of 1 dot fermoral component option of cr or ps , d ifa re 16 vac hydrophobic dressing with 400 600 micron size reticulated structure foam small sizemedium size large size extra large and , d ifa re 16 semi rigid polyester cast which allows controlled mobility 7 dot 5 cm 3 dot 6 metres blue , d ifa re 16 semi rigid polyester cast which allows controlled mobility 7 dot 5 cm 3 dot 6 metres red , d ifa re 16 padded synthetic splint 10cm 40 cm precut , d ifa re 16 padded synthetic splint 10cm 76 cm precut , d ifa re 16 padded synthetic splint 10cm 4 dot 6 metres roll , d ifa re 16 padded synthetic splint 12 dot 5cm 4 dot 6 metres roll , d ifa re 16 orthosuction with dual filter and dual curved tip short and long with tubing 2 dot 5 m 6 8 mm , d ifa re 16 polydioxanone barbed bidirectional suture with taper point half circle needles different sizes size 2 size 3 to 0 box of 12 , d ifa re 16 vacuum dressing set consisting of small size polyurethane foam pressure sensor sealingmaterial //bid details 2 / 90 tubing and cannister , d ifa re 16 vacuum dressing set consisting of medium size polyurethane foam pressure sensor sealingmaterial tubing and cannister , d ifa re 16 vacuum dressing set consisting of large size polyurethane foam pressure sensor sealingmaterial tubing and cannister , d ifa re 16 synthetic bo
Tender For supply of puf panels 60 mm , puf panel 40mm , pre painted galvalume aluminum zinc coating gi based corrugated steel sheet 0 point 80mm , verandah cover with aluminium partitions with 5 point 5 mm thick plain glass , ismb , hollow iron , angle or flat iron or base plate , ms sheet , tmt bars , nut and bolt , upvc door , upvc window 1200 x 1200mm , upvc ventilators 450 x 300 mm , fire extinguisher ball 1 point 30kg , curtain rod of size 1 point 30 m , steel almirah , smart ortho mattress , foot scraper , iron foot mat , white cement , looking mirror , double bunks ms tubes , floor mounted hot and cold water dispenser , bed side table , puf tank 2000 ltrs , plastic dustbins , stainless steel shoe rack , sealingmaterial , laminated wooden floor , tactical heater diesel based , solar light , septic tank 3000 ltrs , ordinary portland cement , coarse sand , stone aggregate 20mm , stone aggregate 40mm , stone aggregate 10mm , vitrified tiles , non skid tiles , stone aggregate 63mm , mcb distribution board db 12 way , mcb sp 32 amps , mcb sp 16 amps , mcb single pole 100 amps , mcb sp 10 amps make , lt panel feeder box , die casted bulk head 8 watt , 16 amp modular switch and socket combination , 16 by 6 amp modular switch and socket combination , modular piano switch 6 amp modular switch , modular piano switch 16 amp modular switch , 16 amp modular socket , modular gang box 12 way , modular gang box 06 way , modular gang box 04 way , modular gang box 03 way , led tube light fitting 4 feet , led tube light fitting 2feet , electric geyser 25 ltr , wire flexible , 1100 v grade frls , pvc insulated unsheathed copper cable 4 sq mm , 1100 v grade pvc insulated pvc , pvc insulated unsheathed copper cable 6 sq mm , earthing , lightening arrester , gi screw 8 mm x 45 mm full threaded 500 nos , gi screw 8 mm x 25 mm full threaded 500 nos , gi screw 8 mm x 75 mm full threaded 250 nos , pvc insulation tape 19mm , cp bib cock 15 mm , cp pillar cock 15 mm , cp stop cock 15 mm , cp soap dish , cp towel rail 24 mm dia 600 mm , vitreous china ceremic floor mounted anglo indian water closet toilet seat , vitreous china bowl urinal flat back , ss garting 100mm dia , vitreous china wash hand basin , cp health faucet with fixing screw , pvc pipe 110 mm , pvc y by t junction 110mm dia , pvc socket 110 mm , pvc swr bend 110mm , pvc floor trap 75mm , pvc pipe 75mm , pvc elbow 75mm , pvc door bend 75 mm , pvc bend 75 mm , pvc shoe bend 75 mm , pvc t 75mm dia , looking mirror 450 x 600 mm , sealing thread
Tender For corrigendum : supply of sector plate hot end (primary to secondary) for αρη τυρε 27.5 vimt 2000 sector plate hot end (gas to primary) for aph type 27.5 vimt 2000 sector plate hot end (gas to secondary) for aph type 27.5 vimt 2000 sector plate cold end (primary to secondary) for αρη τυρε 27.5 vimt 2000 sector plate cold end (gas to secondary) for aph type 27.5 vimt 2000 sector plate cold end (gas to primary) for aph type 27.5 vimt 2000 static seal assembly (hot end + cold end) for aph type 27.5 vimt 2000 radial seals (hot & cold ends) for air preheater 27.5 vimt 2000 by-pass seals for air preheater 27.5 vimt 2000 steam soot blower nozzle for apη τυρε 27.5vmit 2000 , over running clutch assembly for guide trunnion with bolts air preheater 27.5 vimt 2000/over running clutch fso-400 for aph type: 27.5 vmit 2000 fixing pin as per drg. no. 4-55-335-00983 p.a fan ap2-17/12 for unit no 3 & 4 of sikka tps rectangular ring as per drg no. 0-55-334-00661 for pa fan ap2-17/12 for unit no 3 & 4 of sikka tps cylindrical helical spring as per drg no. 4-55-214-00246 for p a fan ap2-17/12 for unit no 3 & 4 of sikka tps cheese head bolt m 16x50 as per drg no. 0-55-334-00661 for pa fan ap2-17/12 for unit no 3 & 4 of sikka tps nut as per drg. no. 4-55-335-00993 for pa fan ap2-17 /12 for unit no 3 & 4 of sikka tps bearing cover assy as per drg no. 0-55-335-00619 for pa fan ap2-17/12 for unit 3&4 of sikka tps distance ring as per drg no. 4-55-335-00859 for pa fan ap2-17/12 for unit no 3 & 4 of sikka tps sealing ring as per drg. no. 3-55-335-00651/01 for pa fan ap2 17/12 expansion delivery side drg no. 3-55-334-00673 for pa fan ap2-17/12 for unit 3&4 of sikka tps split thrust coller as per drg no. 2-56-134-01102 for id fan ndzv 33 sidor for unit no 3 & 4 of sikka tps end closure kit as per drg no:3-56-135-00911 for for id fans ndzv 33 sidor for unit no 3 & 4 of sikka tps. circlip sb 26, blade bearing assembly of forced draft fan tyρε αρ1 18/11 , hfo oil gun nozzle spray plate 90-j16 i,rsb traviirsii csain assiimbly radial brg 200fxm85 skf-61840 of hydraulic turning motor, item no. 6, drg-11150146000/6 for 250 mw of sikka tps unit no. 3&4. sleeve of hydraulic turning motor, item no. 9, drg νο. 11150146000/9 for 250 mw of sikka tps unit no. 3&4. shaft b48x44 of hydraulic turning motor, item no. 3, drg no. 11150146000/3 for 250 mw of sikka tps unit no. 3&4. shaft nut of hydraulic turning motor, item no. 11, drg no. 11150146000/11 for 250 mw of sikka tps unit no. 3&4. lock washer dia 55 skf-mb1155 of hydraulic turning motor, item no. 12, drg no. 11150146000/12 for 250 mw of sikka tps unit no. 3&4. ring of hydraulic turning motor, item no. 10, drg no. 11150146000/10 for 250 mw of sikka tps unit no. 3&4. scru cap soc a12.9 m10x75 of hydraulic turning motor, item no. 19, drg no. 11150146000/19 for 250 mw of sikka tps unit no. 384. scru cap p-8.8 m12x90 of hydraulic turning motor, item no. 20, drg no. 11150146000/20 for 250 mw of sikka tps unit no. 3&4. throttle valve of hydraulic turning motor, item no. 22, drg no. 01165524000/22 for 250 mw of sikka tps unit no. 3&4. scru cap p-8.8 m20x60 of journal bearing no. 2, item no. 16, drg no. 01170318000/16 for 250 mw of sikka tps unit no. 3&4.
Tender For tender for supply of he rotor post seal (3021-01) for primary aph 26-vix-1625 , he radial seal inner (3021-02) sty-1 for primary aph 26-vix-1625 , he radial seal inner (3021-02) sty-2 for primary aph 26-vix-1625 , he radial seal interm (3021-03) for primary aph 26-vix-1625 , he radial seal out (3021-04) sty-1 for primary aph , model-type-26-vix-1625 , he radial seal out (3021-04) sty-2 for primary aph , model-type-26-vix-1625 , he radial holding strip inner (3021-05) for primary aph 26-vix-1625 , he radial holding strip interm(3021-06)for primaryaph 26-vix-1625 , he radial holding strip outer(3021-07) for primary aph 26-vix-1625 , he outer sealing tab (3021-8) for primary aph 26-vix-1625 , he outer seal tab(3021-09) sty-1for primary aph , model-type-26-vix-1625 , he outer seal tab(3021-09) sty-2 for primary aph , model-type-26-vix-1625 , he bypass seal (3021-10) for primary aph 26-vix-1625 , he bypass holding strip (3021-11) for primary aph 26-vix-1625 , he axial seal 3021-12 style-1 for primary aph 26-vix-1625 , he axial seal 3021-12 style-2 for primary aph 26-vix-1625 , he axial holding strip 3021-13 for primary aph 26-vix-1625 , hot end (he) static seal plate for paph , material-carbon steel , ce radial post seal 3021-19 for primary aph , ce radial seal inner (3021-20) sty-1 for primary aph 26-vix-1625 , ce radial seal inner (3021-20) sty-2 for primary aph 26-vix-1625 , ce radial seal interm 3021-21 for primary aph 26-vix-1625 , ce radial seal outer 3021-22 sty-1 for primary aph 26-vix-1625 , ce radial seal outer 3021-22 sty-2 for primary aph 26-vix-1625 , ce radial holding strip inner 3021-23 for primary aph 26-vix-1625 , ce radial holding strip interm 3021-24 for primary aph 26-vix-1625 , ce radial holding strip outer 3021-25 for primary aph 26-vix-1625 , ce outer seal tab 3021-26 for primary aph 26-vix-1625 , ce outer seal tab 3021-27 for primary aph 26-vix-1625 , ce bypass seal 3021-28 for primary aph 26-vix-1625 , ce bypass holding strip 3021-29 for primary aph 26-vix-1625 , ce axial seal (3021-30) sty-1 for primary aph 26-vix-1625 , ce axial seal (3021-30) sty-2 for primary aph 26-vix-1625 , ce axial holding strip 3021-31 for primary aph 26-vix-1625 , cold end (ce) static seal plate for paph , model- 26-vix-1625 , material-carbon steel , machined t -bar , seals for primary aph , model- type-26-vix-1625 , rotor angle 30 deg for primary aph 26-vix-1625 , bypass angle 26-vix-1625 60 deg , carbon ring with spring for primary aph 26-vix-1625 , he rotor post seal 3022-01 for secondary aph 30-vix-2300 , he radial seal inner 3022-02 style-1 for secondary aph 30-vix-2300 , he radial seal inner 3022-02 style-2 for secondary aph 30-vix-2300 , he radial seal interm 3022-03 for secondary aph 30-vix-2300 , he radial seal out 3022-04 sty-1 for secondary aph 30-vix-2300 , he radial seal out 3022-04 sty-2 for secondary aph 30-vix-2300 , he radial holding strip interm3022-05 for secondaryaph 30-vix-2300 , he radial holding strip interm 3022-06 for secondary aph 30-vix-2300 , he radial holding strip outer 3022-07 for secondary aph 30-vix-2300 , he outer seal tab 3022-08 for secondary aph 30-vix-2300 , he outer seal tab 3022-09 style-1 for secondary aph 30-vix-2300 , he outer seal tab 3022-09 style-2 for secondary aph 30-vix-2300 , he bypass seal 3022-10 for secondary aph 30-vix-2300 , he bypass holding strip for secondary aph 30-vix-2300 , he axial seal 3022-12 style-1 for secondary aph 30-vix-2300 , he axial seal 3022-12 style-2 for secondary aph 30-vix-2300 , he axial holding strip 3022-13 for secondary aph 30-vix-2300 , hot end (he) static seal plate for saph , model- 30-vix-2300 , material-carbon steel , ce rotor post seal (3022-19) for secondary aph 30-vix-2300 , ce radial seal style-i for secondary aph 30-vix-2300 , ce radial seal style-ii for secondary aph 30-vix-2300 , ce radial seal interm 3022-21 for secondary aph 30-vix-2300 , ce radial seal outer 3022-22 style-1 for secondary aph 30-vix-2300 , ce radial seal outer 3022-22 st